1970 CHEVELLE! 6.0/4L80E! STAINLESS EXHAUST PLUS CUTOUTS!
Автокөліктер мен көлік құралдары
In this video I’m giving an overview of a 1970 Chevelle that I did a stainless exhaust on! The car has an LY6 6.0/4L80E swap. I did a 3” 409 stainless exhaust with cutouts, x-pipe, Super 44 Flowmaster mufflers, and 3” tailpipes. These cars can be a little tricky doing 3” tailpipes on but you can make it happen!
Again, thanks for watching! Don't forget to like, subscribe, and share the video!
Also follow us on Instagram and Facebook!
Instagram: business page(@mccarty.speedandfab)
Facebook: business page (@mccartyspeedfab)
Пікірлер: 52
I once built an A-Body with "Pypes" stainless parts. The whole damned set-up rusted badly being only 304 series SS. That was a hard-learned lesson. I really like your car.
@mccartyspeedandfab
Жыл бұрын
That’s odd, I’d be curious if the box got labeled wrong. 304 SS doesn’t rust. It will turn a gold/bronze color once it has had some heat cycles but it won’t rust. Thanks it’s a customers car!
@noampitlik2332
Жыл бұрын
@@mccartyspeedandfab Right. Looks like 409. I scrapped it and found really good SS from Vibrant.
@noampitlik2332
Жыл бұрын
@@mccartyspeedandfab I also learned the 'magnet test' after that.
Man that looks and great. I am doing the same set on my 70 Monte Carlo thanks for post this video I be try to get it as much like yours possible.
@mccartyspeedandfab
Жыл бұрын
Thanks so much!
Incredible workmanship. Never seen better.
@mccartyspeedandfab
2 жыл бұрын
Thanks for the kind words Robert!
beautiful work
@mccartyspeedandfab
9 ай бұрын
Thanks! 🤘🏻🤘🏻
You did an amazing job on Chris’ car brother! Will be recommending you to many others!
@mccartyspeedandfab
2 жыл бұрын
Thanks Johnathan!! I sure do appreciate it!
Looks great like I knew it would. Thanks for taking care of them.
@mccartyspeedandfab
3 жыл бұрын
Thanks homie! Gotta take care of good folks!
This is my style. Great build 👍🏻
@mccartyspeedandfab
2 жыл бұрын
Mine too! He has done a great job! 😎
beautiful work sir!
@mccartyspeedandfab
2 жыл бұрын
Thank you!
Great video bro super clean setup
@mccartyspeedandfab
3 жыл бұрын
Appreciate it Ced!
Sweet! Always loved that body style
@mccartyspeedandfab
3 жыл бұрын
Yessir! I always have too!
That's a gorgeous chevelle!! Love it!
@mccartyspeedandfab
2 жыл бұрын
Yessir it’s one of my favorites!
Man that thing mean. Simple. You definitely should have a way more views
@mccartyspeedandfab
2 жыл бұрын
Thanks James! It’s definitely a neat car. The channel has definitely been at slow grow
Your exhaust work is first rate. That car sounds awesome. Are you related to Ronny McCarty? 👍🏽👍🏽👍🏽
@mccartyspeedandfab
Жыл бұрын
Thanks for the kind words! Not to my knowledge but you can’t ever tell! Where is he from?
@robertjordan9075
Жыл бұрын
Hazel hurts, Ga. I’m 68 and he’s a good bit older than me. He had a salvage yard and speed shop.
@robertjordan9075
Жыл бұрын
That’s Hazelhurst Georgia.
@mccartyspeedandfab
Жыл бұрын
@@robertjordan9075 I know who you are talking about but we aren’t related to that set of McCarty’s!
Nice car and great job on the setup. How do I get my hands on the panhard rod setup?
@mccartyspeedandfab
Жыл бұрын
I believe this was a hotchkis el Camino or impala bar that he made custom brackets for! Customer did a very good job on that setup!
Awesome sound!!!! What series of Flowmaster ?
@mccartyspeedandfab
2 жыл бұрын
Thanks Ed! They were Super 44s!
I have a turbo 5.3 in my step side square body and I wanna put a 6.0 and 4l80 in my wife’s 70 chevelle. Only difference would be she has flowmaster 10 series mufflers right now. I was curious what it would sound like!! Nice job
@mccartyspeedandfab
Жыл бұрын
Awesome! This would definitely be a pretty close setup to give you an idea!
Definitely would psint
@mccartyspeedandfab
2 жыл бұрын
Would be a great car to paint! Patina definitely isn’t for everybody!
Nice job! I have a question on how to get terminator x to work with the factory guages. I have a LY6 and a 4L85e, thinking of using Terminator x as well
@mccartyspeedandfab
2 жыл бұрын
Thanks Andre! This actually has Dakota Digital RTX gauges that look factory as well as their BIM module to allow it to communicate with the Holley setup. However you can make original gauges work but you will end up spending half or more of what the Dakota setup costs
@andrer3854
2 жыл бұрын
Thank You So Much
Looks good but did they have any issues with the mufflers hanging that low?
@mccartyspeedandfab
2 жыл бұрын
The mufflers really don’t hang that low to be honest. Definitely not the lowest point in the system so no issues!
What crossmember did you use?
@mccartyspeedandfab
Жыл бұрын
He used holley/hooker engine and trans mounts! 👍🏻
Where can I get the info on the wheel size and offset front and back?
@mccartyspeedandfab
2 жыл бұрын
Rocket brand attack wheels. 18x8 4.5” back space front. 18x10 5.5” back space rear
ff TO 7:00 for the exhaust sound. . . NIce work!
@mccartyspeedandfab
2 жыл бұрын
Thanks Gene! The sound is what everyone comes to hear 🤘🏻
Beautiful work on the exhaust! Sucks no one in Memphis can hold a candle to that.
@mccartyspeedandfab
Жыл бұрын
Thank you so much 👍🏻👍🏻