1965 Godzilla Swap Continental Custom Interior - BMW Console & TMI Seats - Bagged Lincoln Ep. 12

Автокөліктер мен көлік құралдары

The 7.3L Godzilla motor swapped Lincoln Continental is back this week! Last time this 1965 Lincoln slab graced the channel, we were building out the custom reverse hinges with electronic actuators on the trunk to close in our custom trunk-mounted exhaust system.
Well this week we're switching up our focus to the inside of the Continental! We have a set of power seats from TMI. These tangerine chairs come with full electronic adjustability. But with comfort comes headaches. At least for us. Because we have to figure out how to fit these bucket seats and all of their electrical components at the correct height inside of a 60 year old Lincoln! That's not too much of a problem for Dave though. He can easily whip up some brackets to make sure these TMI bucket seats are sitting in the perfect position.
Once that is done he can focus on making the BMW center console fit right in the center of our driver and passenger sides, and then complete the back section with a custom sheet metal center console (that we may or may not have lost the footage of us making).
Next time we work on the Continental, you'll see us getting down in the engine bay again! We're going to be cleaning it up with a whole ton of custom sheet metal work, as well as making a custom intake for our massive 7.3 Godzilla engine!

Пікірлер: 66

  • @andrewshutty3345
    @andrewshutty33452 ай бұрын

    I've never seen more talent in my life you guys are unbelievable

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thank you! We really appreciate that!

  • @Manel66
    @Manel662 ай бұрын

    Dave always enjoying his mental and creative sport. We also enjoyed it with him!

  • @willemp6432
    @willemp64322 ай бұрын

    The color of those seats are perfect. I`ll ride along on the carpet just to check it out much longer.

  • @PowerHousePerformanceLLC
    @PowerHousePerformanceLLC2 ай бұрын

    How you guys only have 200k subscribers is baffling. Video and craftsmanship quality are beyond terrific. Keep up the good work, you guys are awesome.

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    thank you so much! Share us with your friends and help us grow. We're just trying to build cool stuff and take y'all along for the ride!

  • @bazilwreckerloughead
    @bazilwreckerloughead2 ай бұрын

    That interior looks great already, LOVE the color of those seats!

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    We're really stoked to start putting the rest of the interior together. If they look this good with just the insulation down there, imagine when the carpet and rest of the upholstery comes in!

  • @michaelrolleri4559
    @michaelrolleri45592 ай бұрын

    Mikey knows everything, and he’s always watching 😂

  • @Siyadlams
    @Siyadlams2 ай бұрын

    Nice work on the continental. You guys are good 👌👌👌. Each time I watch your episode, I am amazed by the skill and talent.

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thank you so much 😀 We appreciate the support!

  • @Axial_Andrew
    @Axial_Andrew2 ай бұрын

    S2S is killin' it... Orange seats are fire 🔥 in there...

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thank you!

  • @deciplesteve
    @deciplesteve2 ай бұрын

    "OmG!!!1! YoU'rE rUiNiNg ThAt CaR!!!1!" -Dudes that will never be able to afford the car in the first place.

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Sometimes it feels like they think we stole their car to do all this work! The customer has been with us and giving us him input with every step!

  • @michiganracer1181
    @michiganracer11812 ай бұрын

    Can’t wait to see this completed, going to be epic

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Getting close to getting on the road! We got some major engine bay fabrication going on next week!

  • @andrewmc679
    @andrewmc6792 ай бұрын

    Looks so cool guy's love watching the fab work. I can't wait for each week vids.

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thank you so much for the support!

  • @oldblueshhrchannel1847
    @oldblueshhrchannel18472 ай бұрын

    Excellent, David! Thanks Mike, see you next week!

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    See you next week! I hope you're feeling well this week!

  • @oldblueshhrchannel1847

    @oldblueshhrchannel1847

    2 ай бұрын

    @@SalvagetoSavage I’m so good, hooked up for #3 chemo round.

  • @davekeogh
    @davekeogh2 ай бұрын

    The colour really pops, another great job boys

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thanks so much!

  • @NWIGuy
    @NWIGuy2 ай бұрын

    Badass as always gentlemen!!

  • @hedrives
    @hedrives2 ай бұрын

    S2S vid always entertains. Love your content, Mikey.

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Glad you enjoy it!

  • @1973GLH
    @1973GLH2 ай бұрын

    Dave Can DO it all!

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Every time we think he's done, he pull another rabbit out of his hat!

  • @cramiro71
    @cramiro712 ай бұрын

    Great skills, good job

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thanks!

  • @BT_aka_PET_ROOSTER
    @BT_aka_PET_ROOSTER2 ай бұрын

    Damn Ghosts….. that slick metal work looks nice though!

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    We gotta sage the shop before next episode!

  • @shanethompson7543
    @shanethompson75432 ай бұрын

    Another awesome video!! Just wish it was longer....

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    It would be another 5 minutes longer if that dang shop ghost didn't come by and scoop up the memory card with Dave's rear console fabrication!

  • @adoksym

    @adoksym

    2 ай бұрын

    @@SalvagetoSavage Stupid ghost!

  • @KirkVSSpock
    @KirkVSSpock2 ай бұрын

    Simply WOW !!

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thank you!!

  • @forgotn42
    @forgotn422 ай бұрын

    Shop's haunted, for sure. There's always some sort of gremlin haunting any shop working on old cars.

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Probably whoever was the last person to be stuck in the trunk that continental! lol

  • @russelllong2974

    @russelllong2974

    2 ай бұрын

    And they all love 10mm sockets

  • @Lazerchicken69
    @Lazerchicken692 ай бұрын

    one sick car y'all

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thanks!

  • @forgivenx1947
    @forgivenx19472 ай бұрын

    I click on these vids as soon as I see em 🔥

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    We really appreciate that!

  • @JoeZelensky
    @JoeZelensky2 ай бұрын

    The rear cup holders need to be a good bit farther forward.

  • @LuisRamirez-ts3rp
    @LuisRamirez-ts3rp2 ай бұрын

    Miss my savages 💪🏽🔥🔥🔥🫡💯💯🫡

  • @mitchelldrysdale5023
    @mitchelldrysdale50232 ай бұрын

    Should of used the same console for the rear aswell

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Put a double BMW console in there?

  • @76deech
    @76deech2 ай бұрын

    Love the build, i have one question. Why are the cup holders so far back?

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    It's just what felt comfortable when we were actually sitting down in the seats

  • @BUZDRIFT
    @BUZDRIFT2 ай бұрын

    What bimmer is the console out of?

  • @pedrofernando176
    @pedrofernando1762 ай бұрын

    🤙✌️

  • @masterg8189
    @masterg81892 ай бұрын

    💪👊👏

  • @neoatlas3364
    @neoatlas33642 ай бұрын

    What are those rims called? They would look awesome on my c10

  • @IYIENACE
    @IYIENACE2 ай бұрын

    You guys set the bar high every time and you keep on bringing it 🍻

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thank you so much!

  • @andresmith6307
    @andresmith6307Ай бұрын

    Did anyone find out what model BMW the console came from?

  • @sladelewis2421
    @sladelewis24212 ай бұрын

    Not that my opinion is worth anything, the only complaint I would have is how generic the seat controls look. Feels like they should be a brushed billet steel or something. Everything else is fire 🔥

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    We love any sort of constructive criticism! We definitely agree with you there. Maybe when we're getting close to final assembly, we'll have our friend JC whip us up some billet controls!

  • @mikeruscher8359
    @mikeruscher83592 ай бұрын

    Looks great but the back seat cup holder location fucking sucks

  • @SubToTripleThreatRC
    @SubToTripleThreatRC2 ай бұрын

    Nice work as usual.Super fab skills.

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    Thank you! Cheers!

  • @LuisRamirez-ts3rp
    @LuisRamirez-ts3rp2 ай бұрын

    We really have no idea where the footage went Thais has happened to me before maybe forgot to Rec Good job although 🔥as usual 🫡 ty for the content

  • @SalvagetoSavage

    @SalvagetoSavage

    2 ай бұрын

    There are a whole ton of possibilities! We're just happy because in three years we've been making videos, this has only happened maybe only one time before!

Келесі