Guys we have a disaster on the 1963 Volkswagen Beetle restoration! Let me show you what’s going on and how we’ll fix it.
Жүктеу.....
Пікірлер: 33
@stupadasso89618 ай бұрын
Working on my own 63 Rag. Pans going in this weekend.
@DubWerks
8 ай бұрын
Nice!
@johnsarian_cu8 ай бұрын
Concours? Now that's ambitious....
@DubWerks
8 ай бұрын
I try to be LOL
@mikemarak26138 ай бұрын
Good to see you back online! Keep plugging along😀
@jacquelinechellis40368 ай бұрын
One section at a time or install fenders and deck lid and clamp apron and inner quarters then tack the quarters leave apron and deck lid on and weld as much as you can then take fenders off and deck lid and appron as ya weld it in. Live and learn. You can re do those inner quarters. You wont be happy unless its spot on. Thanks for video
@toddjohnston47888 ай бұрын
Thanks for the update 😊👍
@vwcoco7 ай бұрын
Like the inner wing bolt plates you made 👍
@tommyfoley8 ай бұрын
When you said make a jig, I was waiting for a dance.
@christophernoto8 ай бұрын
Thanks for doing a video about Life: Yet Another Learning Experience! Without people like you, willing to be honest about your process, I can get really down on myself for not getting everything right the first time! 👍👍❤️
@glentucker42508 ай бұрын
With your experience on how these little cars are put together, I think this guy is going to come great. Thanks Dubs!
@huissens8 ай бұрын
Wow! Such a hassle, and yet you are doggedly moving forward! Well done!
@drewo.1278 ай бұрын
Keep up the good work!👍 Love watching your updates on the ‘63 Bug! (Also love the Herbie Decklid!)
@DubWerks
8 ай бұрын
Thanks! It’s a good look LOL
@mrbrisket67948 ай бұрын
I hate to tell you this but a concours judge will kill you on points ….. rear body mount has a square hole …. it should be an oval hole …. Rear crossmembers have seam sealer where it should not. Klokker holm patch panels suck, go with wolf parts rear quarter patch panels and Klassic Fab heat channels. Buy quality parts and it will save you a lot of time and $$$$. Keep up the good work.
@DubWerks
8 ай бұрын
I haven’t finished yet. Trust me, I’m familiar with all of the inaccuracies in the replacement parts and will be correcting them. The seam sealer shouldn’t be a big deal, you won’t be able to tell unless you dig it out with a pick when I’m done doing it the way I do. Very tight beads smoothed out and pushed into the seam. No big globs, unless the factory had them LOL.
@barackmycat94488 ай бұрын
That is tricky stuff. It has to be straight. Good luck.
@stephenridgway38868 ай бұрын
😍
@firearmsfred7 ай бұрын
What welders do you use? I’m liking into getting one.
@volksweegan27847 ай бұрын
Its your car to do with as you want, but can I strongly advise you not to make it a Herbie car. I may recommend slammed to the ground or go factory original. Or. Turbo an engine, throw a five speed conversion in it, slam it low, paint it stock whatever color it was originally. Leave the interior as og as u can. Mount a Autometer 8k five inch monster tach with a shift ligt and oil pressure light on your dash, get some five point seatbelts and go race people around town.
@ralphhowes8 ай бұрын
Yes sent you a TIG? NICE!
@DubWerks
8 ай бұрын
Yes, very!
@DC-bm7oz8 ай бұрын
We trust yo dude
@BigMouth380cal8 ай бұрын
How can you do ANYTHING in that MESS. For goodness sake, clean that place up!!!!!!
@abefehr6155
8 ай бұрын
A clutter equals a brilliant mind
@DubWerks
8 ай бұрын
That is clean🤣
@gustavopadilla91768 ай бұрын
What new
@richardroder83298 ай бұрын
You gonna put the correct deck lid on later?
@DubWerks
8 ай бұрын
Yup! The Herbie one is just because it’s mounting brackets haven’t been torn or anything.
Пікірлер: 33
Working on my own 63 Rag. Pans going in this weekend.
@DubWerks
8 ай бұрын
Nice!
Concours? Now that's ambitious....
@DubWerks
8 ай бұрын
I try to be LOL
Good to see you back online! Keep plugging along😀
One section at a time or install fenders and deck lid and clamp apron and inner quarters then tack the quarters leave apron and deck lid on and weld as much as you can then take fenders off and deck lid and appron as ya weld it in. Live and learn. You can re do those inner quarters. You wont be happy unless its spot on. Thanks for video
Thanks for the update 😊👍
Like the inner wing bolt plates you made 👍
When you said make a jig, I was waiting for a dance.
Thanks for doing a video about Life: Yet Another Learning Experience! Without people like you, willing to be honest about your process, I can get really down on myself for not getting everything right the first time! 👍👍❤️
With your experience on how these little cars are put together, I think this guy is going to come great. Thanks Dubs!
Wow! Such a hassle, and yet you are doggedly moving forward! Well done!
Keep up the good work!👍 Love watching your updates on the ‘63 Bug! (Also love the Herbie Decklid!)
@DubWerks
8 ай бұрын
Thanks! It’s a good look LOL
I hate to tell you this but a concours judge will kill you on points ….. rear body mount has a square hole …. it should be an oval hole …. Rear crossmembers have seam sealer where it should not. Klokker holm patch panels suck, go with wolf parts rear quarter patch panels and Klassic Fab heat channels. Buy quality parts and it will save you a lot of time and $$$$. Keep up the good work.
@DubWerks
8 ай бұрын
I haven’t finished yet. Trust me, I’m familiar with all of the inaccuracies in the replacement parts and will be correcting them. The seam sealer shouldn’t be a big deal, you won’t be able to tell unless you dig it out with a pick when I’m done doing it the way I do. Very tight beads smoothed out and pushed into the seam. No big globs, unless the factory had them LOL.
That is tricky stuff. It has to be straight. Good luck.
😍
What welders do you use? I’m liking into getting one.
Its your car to do with as you want, but can I strongly advise you not to make it a Herbie car. I may recommend slammed to the ground or go factory original. Or. Turbo an engine, throw a five speed conversion in it, slam it low, paint it stock whatever color it was originally. Leave the interior as og as u can. Mount a Autometer 8k five inch monster tach with a shift ligt and oil pressure light on your dash, get some five point seatbelts and go race people around town.
Yes sent you a TIG? NICE!
@DubWerks
8 ай бұрын
Yes, very!
We trust yo dude
How can you do ANYTHING in that MESS. For goodness sake, clean that place up!!!!!!
@abefehr6155
8 ай бұрын
A clutter equals a brilliant mind
@DubWerks
8 ай бұрын
That is clean🤣
What new
You gonna put the correct deck lid on later?
@DubWerks
8 ай бұрын
Yup! The Herbie one is just because it’s mounting brackets haven’t been torn or anything.
Little hard to hear..fyi
@DubWerks
8 ай бұрын
Yeah, gotta bump it up.