1963 LS Swap International Harvester Travelall Wagon Project! - 6.0 LS IH Wagon Ep. 1
Автокөліктер мен көлік құралдары
Like what we're wearing? Grab yourself some S2S gear here:
www.salvagetosavage.com
Check out last week's Patina Episode to see how to make a custom matched patina!
• How to Create a Perfec...
We have a brand-new project rolling into the shop this week! This 1963 International Harvester Travelall is getting the full Salvage to Savage treatment. We're ripping out that old rusty inline six and hacking away at all the rusted-out panels to give the cab a bit more structure. We're also doing some repair to the fire wall to make sure we're ready to start dropping in the 6.0 LS for this burnout machine! We also have some other awesome plans for this ride; like an airlift suspension and a Restomod AC! So make sure to subscribe so you don't miss out on this build!
---------------------------------------------------------------------------------------------------------------------------
Want to See More S2S Madness???
Breaking the Tesla Swapped C10
• We Broke the Tesla Swa...
Turbo Chevelle + GTR Doorhandles
• GTR Door Handles on th...
Tesla C10's first burnouts!
• Burnouts in the Tesla ...
Check out the new patina Vandura Build!
• Saving a Patina 1976 G...
We got a brand new modern interior for the LS swapped K10!
• Full Updated Interior ...
Пікірлер: 227
Pfff!!! Computers couldn’t have done that, nothin beats old school 🤙🏻
Excellent Mike! Excellent! Can’t wait to see it slammed on the air bags and that 6.0 growling thru 2.5” pipes and glass pack mufflers , old school!
@SalvagetoSavage
2 жыл бұрын
Thank you!!! We're already itching for it to do some burnouts!
This should be at least 31min long. It`s the best work on The Tube for me at the moment....
@SalvagetoSavage
2 жыл бұрын
Thanks so much!
Man yall never disapoint. Every project is more bad ass than the last
@SalvagetoSavage
2 жыл бұрын
Thank you so much!
Back in the 80’s had a buddy owned a travel-all it had that old 6 and the carb just sputtered and spit. So instead of fixing the carb we put our money together and got a personalized license plate SURGE we went everywhere in that thing!✌️
@SalvagetoSavage
2 жыл бұрын
I was waiting for you to say you pooled your money together and got a new carb, but that ending is 100x better! lol
I have pictures of this Travelall traveling down Hwy 90 in Louisiana... cool to see the new project in person!!!
@SalvagetoSavage
2 жыл бұрын
That's awesome!
Puddin would be proud 👍👍
The bossman putting that work in .... its always dope working with/for people with real skills. 👏
This is the exact type of content we love watching, keep up the great work!
@SalvagetoSavage
2 жыл бұрын
Thank you! Will do!
Nice old-school metalwork Mike!!
@SalvagetoSavage
2 жыл бұрын
Thanks!!
You make it look so easy with all the work that you are doing basically starting to look great. Thanks for sharing 👍
@SalvagetoSavage
Жыл бұрын
Thanks for watching!
You guys make metal work look so easy. It makes me want to try some body work on a junk yard car
@SalvagetoSavage
2 жыл бұрын
Do it! The only real way to learn is to get hands on!
This is gonna be a lot of fun.
Sub'd just for the Travelall. The IH community is going to love this!
@SalvagetoSavage
2 жыл бұрын
We're so stoked to get an LS dropped into this thing!
Hell yea! The boss man getting in there and showing the old school tricks! Bro firewall came out bad ass. Time for u to hit it with ur master patina touch.
@SalvagetoSavage
2 жыл бұрын
We're so stoked on this build! Chaching left so of course we need something even rustier to drive around in!
@fishpony1211
2 жыл бұрын
@@SalvagetoSavage out with the old and in with the… older??? Lol gunna be a beast im sure
Harvester of Sorrow!!!
quickly becoming my favorite channel with these steady uploads!!
@SalvagetoSavage
2 жыл бұрын
Thanks so much for watching! We really appreciate all the support!
DAMMIT son , these 16hr days are whoopn my azzzzz! Big Bertha lookn GOOD boizzzzz !
@SalvagetoSavage
2 жыл бұрын
Glad to see you in the comments Gene! Hope this video helped you relax a bit!
Mikey: Stay in school.. Me in school: Damn I wish I could work on cars instead... great Vid..🔥🔥🔥🔥
@nickdfoxy
2 жыл бұрын
You're in the wrong programs in school. If there's not a CTE program in your school district, get in a district so you get get on that track.
looking good! Can't wait to see the finished product.
@SalvagetoSavage
Жыл бұрын
We got a new episode coming out tomorrow!
This is the stuff cars shows on Netflix/TV should be showing us. More details and how the smaller parts are made, what actually goes into building these things... Good work guys!
@SalvagetoSavage
Жыл бұрын
Thank you!!
Very cool project. Were doing a 57 international truck on a Cummins chassis. Very Similar patina. Such an awesome look!
@SalvagetoSavage
2 жыл бұрын
that's awesome!!!
Heck yea! Thanks for the new video!!
@SalvagetoSavage
2 жыл бұрын
Hope you enjoyed it!
Great job Mikey
@SalvagetoSavage
2 жыл бұрын
Thank you!
As always you are knocking out some good work.
@SalvagetoSavage
2 жыл бұрын
Thanks again!
Gonna be a fun build. Mikey. Thanks for the content.
@SalvagetoSavage
2 жыл бұрын
Thanks for watching!
Oh BABY. LET'S GOOOOOOOOO!!!!
@SalvagetoSavage
2 жыл бұрын
Let's GOOOOOO!
Badass work man. Love the travel all
@SalvagetoSavage
2 жыл бұрын
Thanks Luke, it’s gonna be bada$$
I.H. 🤘🇺🇸! Excellent series
@SalvagetoSavage
2 жыл бұрын
Thank you!!
What you guys do with metal is pure art, there is no other way to describe it!
@SalvagetoSavage
2 жыл бұрын
Thanks so much!
I'd like to see an old school polished bare metal clear coat car on here. That look reminds me of old school aircraft like the douglas dc-3, the f-86 sabre, or say a b29 bomber. Would definitely present a good challenge considering how perfect you have to get the metal.
@SalvagetoSavage
2 жыл бұрын
We would have to find a body that was close to being perfect from the start. This one would be way too rusted out for that!
Art Bro! Just Art!
@SalvagetoSavage
2 жыл бұрын
Thank you!
Boss man gittin dirty i love it
You guys just keep delivery one cool project after another! Love it!👍😁
@SalvagetoSavage
2 жыл бұрын
Glad you like it!
Love the truck 🛻
@SalvagetoSavage
2 жыл бұрын
thank you!
Those moony caps are the bee's knees. It makes it look 😎
Awesome content
@SalvagetoSavage
2 жыл бұрын
Thank you!
I am not even a shade tree mechanic, but I’ve always been interested in cars and metal work. I really enjoy and appreciate your videos. I don’t think anyone has a better mix of entertainment and information while keeping the videos a good length. I also appreciate that you don’t go way overboard for the sponsors. You guys are rocking it!
@SalvagetoSavage
2 жыл бұрын
Thanks so much for the support and we're really glad you like the videos! We really appreciate the feedback too Josh!
great to see mikey getting some fab work done! i thought he just handed everything off to tim
Sick ! That needs to be the shop cruiser ,parts getter etc.
Hopefully you will make it to Sema MAHALOS AWSOME CONTENT
That steering column is a javelin waiting to pierce the driver in an accident. We've come a long way...
@SalvagetoSavage
2 жыл бұрын
The danger is part of the fun of these old cars! lol
Love the explanation on the metal work. Would love to see a shoptour btw.
@SalvagetoSavage
2 жыл бұрын
We might just do one soon!
Makes you want to sit in the shop and just watch them work.
@SalvagetoSavage
2 жыл бұрын
Thanks for the support!!
Cant wait for this one! this is by far my favorite channel on youtube now
@SalvagetoSavage
2 жыл бұрын
Wow, thanks! We're so stoked you like the content!
Hey guys! I bought a cnc plasma table about 6 months ago with no cad/cam experience. I have a few piece of advice that worked for me, fusion 360 has sooo many features it can be overwhelming to start out, I use Shapr 3D on my iPad and can sketch with the pencil, I can create anything on there and then send it to fusion 360 simply to convert to a cut file…. Simplified my life. If you have any questions feel free to reach out! Edit: also my favorite part of shapr is the ability to take a small bracket iv made out of cardboard, put a ruler next to it, take a picture, import the picture and easily scale it using the ruler in the picture. no exaggeration from cardboard cutout to metal part in my hand in under 20 minutes
@SalvagetoSavage
Жыл бұрын
Thanks for the heads up!
Sweet AF
@SalvagetoSavage
2 жыл бұрын
Thanks!
Hey talk to Puddin's Fab Shop , he's the other KZreadr who has a travelall with an LS Swap, he might have parts. I Love these, looking forward to the build.
@SalvagetoSavage
2 жыл бұрын
We'll look him up! Thanks for the heads up!
Yeah, that thing looked like a rust bucket when it came it. Can’t wait to see the build coming along. I guess we are not looking for perfection on this one🤙🤙
@SalvagetoSavage
2 жыл бұрын
We're definitely building it to be a ripper!
Looks like Puddin Fab Shop truck at 1st glance. Same era International with an LS motor in it.
amazing content guy!!
@SalvagetoSavage
2 жыл бұрын
thanks!
Love me some C series travelall ls swapping. Done a few at our shop too , drive so nice! 🤘
@SalvagetoSavage
2 жыл бұрын
Awesome! This one's definitely going to be a cruiser with some spice!
Nice work on that floor. Great video! Thanks for the great content.
@SalvagetoSavage
2 жыл бұрын
Thanks for watching!
Mikey ... I'm glad your first name isn't "Richard" ... you, Sir, get it done. Noice :o)
I’m in love with this project!
@SalvagetoSavage
2 жыл бұрын
Hopefully we'll have it doing burnouts for you soon!
excited to see her unfold
@SalvagetoSavage
2 жыл бұрын
She's gonna be a ripper for sure!
I love the audacity of you knowing the fuel prices are higher than ever and still shoving a 6.0L lump in to this thing....love it
@SalvagetoSavage
2 жыл бұрын
"what's the most expensive part of this build?" "....uhhh probably the gas billl" lol
Boss man is a fn badass FAB wk incredible old-school awesome job 👏YEAH YOU CAN JUST FKN AWSOME 👏 rrrrtuuuuusssssttttrrrreeeeppppaaaiiirrr O.M.G.
@SalvagetoSavage
2 жыл бұрын
Thank you Albert!!
Great work, love this channel
@SalvagetoSavage
2 жыл бұрын
Much appreciated!
Boss man killing it!!! Impressive 👌💯
@SalvagetoSavage
2 жыл бұрын
Thank you!!
Holy crap! Did you buy this car from Switzerland? Because the floor looked like Swiss cheese... 😲 But yeah, this is why shops like S2S need to exist and teach the next generation. Oldschool metalwork and repairs instead of just change out parts... 😎👍
@SalvagetoSavage
2 жыл бұрын
lol! If we want to be keeping these cars on the road, we definitely need to start teaching the next generate about metal fab! These cars aren't getting any less rustier!
You guys are freakin AWESOME man
@SalvagetoSavage
2 жыл бұрын
Thank you for the support!!
Truck lookn good. Love the air ride. Just hope you have more luck with airlift then I and alot of other folks do. My air manifold is on its way back to them again for the 2nd time in less then a year and still has less then 100 miles on it. Their custom service has gotten so bad that a couple of the companies that do air ride kits have completely quit selling their products. Even worse when I sent them my manifold # they tried to tell me it wasn't their part.
@SalvagetoSavage
2 жыл бұрын
Damn that sucks! We only run air lift in our bagged set ups and we haven't had any issues with them yet
@GlassWerx
2 жыл бұрын
@@SalvagetoSavage honestly in all the years iv built using airlift I seem to have had an issue with almost every manifold or controller used but their customer service used to be 10x better. Reason I went with airlift and also reason I bought a 3s manifold rather then upgraded more was bc they advertised rise on start which it didn't have. But it's all good just got get n there ass a bit now to get good customer service
Much goodness, two thumbs up. 👍🏼
@SalvagetoSavage
2 жыл бұрын
Thanks!!! 👍
Please do a build series, or at least build break down, on the black Pontiac in the back ground
@SalvagetoSavage
2 жыл бұрын
We'll do a little walk around of it soon!
man for the money can beat the 6.0
I’m stoked to see what else you are going to do for this travall. Also JAred from wrench everyday knows of a good shop that deals with nothing but old internationals. I can’t remember the name I think it was like jrc garage but I really can’t remember
@SalvagetoSavage
2 жыл бұрын
We'll have to look them up! Thank you!
Restomod Ratrod ls swap 👍
i have a 56 travelall. its a 1 year only that im going to be body swapping onto my 91 caprice.
@SalvagetoSavage
2 жыл бұрын
That would be an insane body swap!
@TheBigGuyGarage
2 жыл бұрын
@@SalvagetoSavage me and my buddy have done many. We did a big build which was a military dodge carryall on a 03 durango 360 4x4. We did many dakota swaps on dodge job rated and little ih trucks.
Good 🔥
@SalvagetoSavage
2 жыл бұрын
Thanks!
@feo_46
2 жыл бұрын
🔥👍
Отличный автомобиль!
I have a panel travelall. 1966 i clipped a 2002 1500 front suspension 5.3 4l60 and diff from 2002 on 17in Is artillery rims 9in back 7 in fronts! Any way enjoyed your video!
@SalvagetoSavage
2 жыл бұрын
That sounds awesome! Hope you like this build too!
@peterhatch1583
2 жыл бұрын
@@SalvagetoSavage i will theres a guy did it before me on his on utube Puddins fab
I don't know man; there's just something about not only seeing shit get done, but when it's done right, you just know...you know?
i dont know if youd picked colors or not but a cream pearl an metal flake green mirroring its original paint but updated would look killer
@SalvagetoSavage
2 жыл бұрын
The only things getting painted on this are repair panels. Everything else is staying original
👍👏
You guys rock! Can't wait for next episodes of building this awesome truck! What are you guys doing for the steering mechanism? keep it stock, or crown vics front swap?
@SalvagetoSavage
2 жыл бұрын
It'll probably stay stock but we're not 100% sure yet!
Amazon sells killz mat that's way cheaper then dyomat, for the diy budget friendly.
@SalvagetoSavage
2 жыл бұрын
We like going with the restomod stuff because it's extra thick, but that's definitely a good option too!
@andme9408
2 жыл бұрын
@@SalvagetoSavage yeah especially if you are on a home builder budget.
Nice Video. #STAYSAFE #PHILLYPHILLY 🇺🇸
why nobody puts sound treatment on the roof? Its a huge metal resonating piece that will increase the comfort many times if soundproofed and in the summer the heat insulation would really shine
@SalvagetoSavage
2 жыл бұрын
We probably will if we decide to put a headliner on the car
👍✌
So what happens to the backside of a panel patch where the weld is? The exposed side gets worked and painted to keep it from rusting but what happens to the back?
💯
💪👊👋
When you go to join the group tell them you have a 63 or 64 Travelall. IH titled them the years they sold them which is why it says 66. As soon as you join a group every IH guy gets off on correcting people who post 😂😅. Cool Travelall, check mine out if y’all get bored 👊🏻
@SalvagetoSavage
2 жыл бұрын
Lol, oh yah I experienced that 2 days after I got the truck and joined a few FB groups. I’ve heard you got a very similar truck to ours. Where’s is your shop?
@PuddinsFabShop
2 жыл бұрын
@@SalvagetoSavage middle of no where oklahoma.
I have a 68 international pickup, I wanted to know what wiring harness you guys used.
@SalvagetoSavage
Жыл бұрын
The wiring harness we used came from Painless Wiring!
where can i pick up that 6 inline,4.1 engine at????? 😆 by the way,keep up the good work !!!
@SalvagetoSavage
2 жыл бұрын
Hit us up on instagram if you're interested in it!
Another awesome project; SEMA Show bound?
@SalvagetoSavage
2 жыл бұрын
We're just aiming for LS Fest with this one right now!
@kevinfenwick721
2 жыл бұрын
@@SalvagetoSavage Sweet LS fest East? Ill be brining my LS lawn mower
Seems like you're taking for granted that the tunnel is big enough for the transmission with no modifications.
@SalvagetoSavage
2 жыл бұрын
The tunnel is big enough for the new transmission
Are you planning to repair the cowl behind the dash, or just let your feet get wet when it rains?
@SalvagetoSavage
2 жыл бұрын
Yes
Awesome project! What is that rust spray you used?
@SalvagetoSavage
2 жыл бұрын
It's a rust converter. Eastwood makes a good one that we usually use!
@RadoMatt
2 жыл бұрын
@@SalvagetoSavage ok thanks!!
What's the weight difference on the old engine vs new? Old one looks HEAVY!!
It ain't "needs a little TLC to savage" now is it? LOL
@SalvagetoSavage
2 жыл бұрын
If it's not a headache, we don't want it! lol
Who makes the bead roller at 9:44, and are you happy with it and would recommend...
So I have a 64 1500 with the BD264 and I'm looking to rebuild the old girl and the original motor just wondering about parts
Check out a fellow youtuber. Puddins fab shop. He did an ls swap travel all on air ride.
@SalvagetoSavage
2 жыл бұрын
We'll make sure to look em up!
Where do I go for the inline 6??
@SalvagetoSavage
2 жыл бұрын
Shoot us a message on IG!
I'm looking for a driver door for a 4 door 1971 Buick Electra.
Isnt there a recommended vehicle weight limit for an ls or have i bin lied to?
@SalvagetoSavage
2 жыл бұрын
You can put an LS into just about anywhere it can fit. We've put them in lifted trucks and small drift cars. Power to weight ratio, of course, will be different.
@infernusifrit9348
2 жыл бұрын
@@SalvagetoSavage I had an LS conversion in mind for my sons Mitsubishi Eclipse and a shop i ran the mod past was like. This cars around 3000 lbs bla bla bla. Id never heard about any weight limit. Like the eclipse could possibly be much heavier then an Suv. Thanks for the info, nice project that Travelall I had a 67 with a 304. Ran real nice. Can't wait to see yours finished. I think, true story they were just afraid of the mod. Guess we will do the mod ourselves.
Tell me you will be upgrading the brakes
@SalvagetoSavage
2 жыл бұрын
Yes for sure, it’s not gonna be easy but we’re working on a solution
.