We are now working on the front of the 1963 Impala. I did have a slight injury, stay to the end!
Жүктеу.....
Пікірлер: 20
@carlosherrera85417 ай бұрын
Great video. I’m finally tearing my 63 apart after 10 years in storage, most of the parts I had to just cut them off and quite a few bangs from my mallet lol
@chrissexton66973 жыл бұрын
Well at least you got it all tore apart before you got the thumb!! Impala should ride pretty nice once your done looks like it was definitely in need of the upgrade! It’s hard to believe that body style is almost 60 years old. Beautiful car nonetheless! Great video!
@slowshedgarage74092 жыл бұрын
It's a job doing all that front end. I just did my 68 Impala a few months back. New Subscriber.
@slow_restoration
2 жыл бұрын
Thanks for the sub!
@rsonweb2060 Жыл бұрын
Just what I need for my 63 Biscayne project. Thanks from "Even Slower Restoration"
@JosephSalas1282 Жыл бұрын
Wish you would have showed how you actually removed the cross shafts on the lower control arms..
@marciops32 жыл бұрын
Nice! My Chevrolet Opala 1978 uses the same mechanics
@77TopGunner3 жыл бұрын
Man that looked like it hurt, hope for a quick recovery Danny!
@MD-pt2mw Жыл бұрын
GOOD JOB BUD...SUBBED
@slow_restoration
Жыл бұрын
Thanks!
@northerncali707ave3 ай бұрын
Hi thanks for the video. Do you know the torque specs for the three bolts that bolt on from the front lower A arms to the frame by chance?
@pyro719juggalo Жыл бұрын
Where did You get the kit from?
@slow_restoration
Жыл бұрын
Customer supplied.
@rantzcooper62132 жыл бұрын
You didn't show how you took anything off.. all you're showing is it being done
@jaredday78242 жыл бұрын
Where is the follow up video. Also how did u remove the driver side upper control arm with the steering shaft in the way?
@slow_restoration
2 жыл бұрын
kzread.info/dash/bejne/Z5ehrtNsgcuofrg.html You can drive the bolts out of the frame and lift it straight up and out.
@jimlevering46133 жыл бұрын
Hope it's not as bad as you lead on?
@nohemoglibin8677
2 жыл бұрын
I'm in the process of doing this now, and it sucks.
@tilldoggz Жыл бұрын
Good video, but you don't show how u fit the bushing, just the done bit, blahh
Пікірлер: 20
Great video. I’m finally tearing my 63 apart after 10 years in storage, most of the parts I had to just cut them off and quite a few bangs from my mallet lol
Well at least you got it all tore apart before you got the thumb!! Impala should ride pretty nice once your done looks like it was definitely in need of the upgrade! It’s hard to believe that body style is almost 60 years old. Beautiful car nonetheless! Great video!
It's a job doing all that front end. I just did my 68 Impala a few months back. New Subscriber.
@slow_restoration
2 жыл бұрын
Thanks for the sub!
Just what I need for my 63 Biscayne project. Thanks from "Even Slower Restoration"
Wish you would have showed how you actually removed the cross shafts on the lower control arms..
Nice! My Chevrolet Opala 1978 uses the same mechanics
Man that looked like it hurt, hope for a quick recovery Danny!
GOOD JOB BUD...SUBBED
@slow_restoration
Жыл бұрын
Thanks!
Hi thanks for the video. Do you know the torque specs for the three bolts that bolt on from the front lower A arms to the frame by chance?
Where did You get the kit from?
@slow_restoration
Жыл бұрын
Customer supplied.
You didn't show how you took anything off.. all you're showing is it being done
Where is the follow up video. Also how did u remove the driver side upper control arm with the steering shaft in the way?
@slow_restoration
2 жыл бұрын
kzread.info/dash/bejne/Z5ehrtNsgcuofrg.html You can drive the bolts out of the frame and lift it straight up and out.
Hope it's not as bad as you lead on?
@nohemoglibin8677
2 жыл бұрын
I'm in the process of doing this now, and it sucks.
Good video, but you don't show how u fit the bushing, just the done bit, blahh