Brother I am so excited watching your videos I never would of thought to fix the old to make it better to put in the new absolutely awesome.

Can't wait to see the next video !

@guzzifabrication3448

3 жыл бұрын

It's in the works, thanks for watching !

So clean

@guzzifabrication3448

Жыл бұрын

That's awesome thank you!

Great video .

@guzzifabrication3448

2 жыл бұрын

Thanks ! If you want to see metal work that replicates the factory check out the 1968 Charger restoration on my content page, again thanks for watching

I tell ya it is good therapy to see such intense work. I couldn't do it. I'd like to have bill gates kinda money to make a 1962 Chevy Batmobile. Maybe fins in back.

Can see how valuable that frame jig is to you. Definitely worth it to build one for a restoration such as this. I will be building one for my next Impala. I have 5 patiently waiting their turn. Thanks for the info. Great substance.

@guzzifabrication3448

3 жыл бұрын

5, wow that's awesome!

Always good work ! Very professional.

@guzzifabrication3448

3 жыл бұрын

Thanks ! I try to be the best craftsman that I can and use what I'm been given. Your support is much appreciated !

Thanks for the bracing tips.

Fascinating how you make it look so easy Robert.

@guzzifabrication3448

2 жыл бұрын

Thanks !

I’m trying to fix up a 64 impala and your work really gives me a lot of tips here and there cause I’m not a pro so your videos help a lot,I was gonna send you some pictures but it wouldn’t let me.

@guzzifabrication3448

3 жыл бұрын

If you have any questions please ask' Thanks for watching !

Awesome video man !

@guzzifabrication3448

3 жыл бұрын

Thanks !

@Cheez1979

3 жыл бұрын

I’m doing a similar 62 impala build .. I’m at the point we’re I’m ready to paint the new installed floor pan. Do you Seem seal the underside and braces of the pan ?

@guzzifabrication3448

3 жыл бұрын

@@Cheez1979 I seam seal every joint, I use 3M fast and firm it works well for me, it does skim over really quickly so you have to be quick when you're working with it but it expands and contracts really well doesn't pull away over time from the joint.

@Cheez1979

3 жыл бұрын

@@guzzifabrication3448 good stuff thanks man

Been anxiously awaiting this video!

@guzzifabrication3448

3 жыл бұрын

Working on part 9 brother! thanks for watching !

@kobra_style

3 жыл бұрын

@@guzzifabrication3448 Looking forward to it!

Really really enjoy watching your work learning a lot from you Getting ready to hopefully rebuild my 60 Bel-Air soon . When you Weld the framework inside of the car to keep it from twisting and warping where is the best places to Weld this temporary framework, And is it always a good idea to weld in the temporary framework or only when you're doing certain things Like moving the body around a lot Thank you so much for your help best regards Richard

Awesome job great work recently working on my Impala I have to do the rockers on mine too but not as bad as yours looking forward to seeing your process god bless

@guzzifabrication3448

3 жыл бұрын

Thanks ! if you go to the video page, I just finished up a 68 Charger that will mirror the work on the Impala.

Fascinating how you make it look so easy Robert. Did you do part 9 video yet. I been following this since the beginning. Great work.Coming along very nice.

@guzzifabrication3448

Жыл бұрын

Thank you for supporting the channel ! all of the videos on the 62 finish out are in my playlist.

nice vids man i really enjoy it and appreciate the tips, i have 2 that im building and ive never restored a car, but watching you as you go along, before i start is alot for me so thanks. ive been in "school" by practicing and learning these things before i gewt started, these cars will test me big time. again thanks. also what are the clamps you use to pull the body panels? i have one that took some collision on the side and may need something like that

@guzzifabrication3448

Жыл бұрын

If you Google Moe clamp that's a brand name I believe but it's just a standard Collision Repair body clamp if you go to auto body Toolmart.com they carry those, you can absolutely do the repairs to your car take your time plan out what you're doing take pictures and you'll be fine hey thank you for watching

Can the rockers be cut out and replaced without having to remove the whole floor? And what's the difficult range on a job like that? Thank you for your time. Great vids.

@guzzifabrication3448

Жыл бұрын

Yes but, you definitely would want the car on a fixture of some kind

love the videos man this is inspiring. what size is your jig table I was thinking of making one for my impala and other projects. looks like its a perfect size. Thanks in advance.

@guzzifabrication3448

Жыл бұрын

4' x 17'

Whats your criteria for bracing a body. If the floors and rockers were good would u still brace body?

@guzzifabrication3448

2 жыл бұрын

If I were replacing the entire rear section ( quarters, trunk, etc ) yes I would still put the vehicle on a fixture.... can those items be replaced without using a fixture? yes... A fixture removes any variable or guessing. Thanks for watching !

Do you have a rough idea what it should cost to replace the full floors/braces/inner and outer rockers in a 62 impala, thanks just trying to get a heads up on what it should cost me roughly thanks

@guzzifabrication3448

2 жыл бұрын

I am planning out a pricing video in the future. Thanks for watching !

Will you give an estimate to restore a 1966 4 door Impala? Rust like the one in this video, at lease.

@guzzifabrication3448

2 жыл бұрын

Send some pics to my email

I'm curious how much does something like this cost

@guzzifabrication3448

5 ай бұрын

Higher end craftsman shops are at an hourly rate and lower quantity shops price by the job

It seems like you replaced a bout 80 percent with after market panels wouldn't it be easier to build a new body with replacement body parts ?

@guzzifabrication3448

3 ай бұрын

yes

@SLICK-GLN

3 ай бұрын

@@guzzifabrication3448 could you build a car body from those pieces?

Hello guzzi Toni my name I'm working on a 1968 impala convertible the entire under carriage if rusted do you have any video wheel wells inner/outer rockers,truck floor.

@latonispraggs3429

3 ай бұрын

Parts are hard to find can you assist with convertible rack rusted as well thanks

@guzzifabrication3448

3 ай бұрын

Yes, Toni I have multiple videos on those subjects.Look on my playlist under 62 63 64 impalas.You will find everything you need there. Thanks !

@guzzifabrication3448

3 ай бұрын

​@latonispraggs3429 Do you mean the convertible top where to buy?Or repair?

Just curious. How much would this restoration cost? (Roughly.)

@guzzifabrication3448

Жыл бұрын

I give estimates after the vehicle has been disassembled, installed onto a rotisserie and media blasted.... anything else is just guessing....

I'm doing a 60 impala rocker. My floors and braces are solid. Can I just cut out the outer and inner rocker without bracing it?

@guzzifabrication3448

2 жыл бұрын

Is it on a frame fixture George? Bracing it is always cheap insurance

@georgesand4629

2 жыл бұрын

It's on it's own frame with floors. The floors are solid. It's on it's wheels like a whole car.

@guzzifabrication3448

2 жыл бұрын

@@georgesand4629 probably okay without bracing but it's really a judgment call..... as you're cutting the floor you want to pay attention and make sure things don't start shifting or moving

Hey Guzzi how can i get the same work done on my impala….your website isn’t working

@guzzifabrication3448

2 жыл бұрын

Thanks for pointing that out, try: www.guzzifabrication.com/ also you can google search guzzi fabrication rowlett tx for the phone#. I would be happy to help anyway I can with your project.

Did you make the stand that the body is on?

@guzzifabrication3448

7 ай бұрын

Yes I made the frame fixture 4x4x1/8 square tubing

@elizj713

7 ай бұрын

@@guzzifabrication3448 nice, would you mind sharing the dimensions? I’d like to build one to put my 63 on.

@guzzifabrication3448

7 ай бұрын

@@elizj713 kzread.info/dash/bejne/ZJycy7GGqqipYto.html That's the full build

@elizj713

7 ай бұрын

@@guzzifabrication3448 awesome, Thanks

@guzzifabrication3448

7 ай бұрын

👍@@elizj713

Have you ever heard of a plasma cutter.

@guzzifabrication3448

2 жыл бұрын

So... you've only cut clean metal on a bench with a plasma cutter, not painted, multi layered shapes that have rust, fiberglass, body filler, and lead filler possibly in them....... I see your experience level......