A video of the build of my 1946 Ford 1 ton truck. All music performed by Throttle Body from Detroit.
Жүктеу.....
Пікірлер: 513
@paulshamblin62602 жыл бұрын
Needs fuzzy dice. Great job. Really cool.
@DizzoMartell
Жыл бұрын
Agreed
@mrbratt697 жыл бұрын
as insane amount of work went into this rat rod truck, I personally don't care for Rat Rods but my hat is off for you bud, excellent work, job well done, I know or have an idea about the amount of work that went into getting this vehicle to the stage your at, a lot of one off ideas and a damn fine job, I have built quite a few vehicles myself, none that come close to what you have done but I know how much work goes into building our pride and joy, I can only imagine how many late nights went into building this, I have been there done that, one vehicle that I built for a customer I literally worked 48 hours straight to get it ready for the paint shop to take over, this is bad ass bud!!!!!!!
@DizzoMartell
7 жыл бұрын
I'm surprised, (in a good way) that there are still people who can have positive feedback even though they don't care for the finished project. There were many long nights. good thing I don't need to do any body work... Thank you for the kind words.
@73Bugman4 жыл бұрын
A straight 6 looks so much better in this build. Thank you so much for not going 350 Chevy. Great job 👍🏽
@DizzoMartell
4 жыл бұрын
Thanks! i agree
@bobm72754 жыл бұрын
You could have had a $100,000.00 rat rod if you hadn't insisted on doing everything yourself. Best I've seen in a long time, the sport needs more people like you, desperately.
@DizzoMartell
4 жыл бұрын
Thanks so much. Yes, we do need more people in this sport. especially younger people.
@bryansnell7 жыл бұрын
Incredible build! Thank you for documenting and sharing your progress. Was fun and inspiring to watch.
@synthpro2 жыл бұрын
Very cool build. Nothing like the diesel version of the 280z engine...tough old engines.
@DizzoMartell
2 жыл бұрын
Great motor!
@bryanchavez35977 жыл бұрын
Awesome build, thanks for letting us see it
@blairguinea13377 жыл бұрын
Yeah thats for sure Dizzo, what at awesome build, love the ratrod stuff, thanks man
@rustyrods85357 жыл бұрын
Pretty Dam cool , love the upside down frame .
@abrielonsurez40517 жыл бұрын
👍👍👍 awesome job man. I love the ratty diesel rods. especially the ones without the typical Cummins swaps.
@gsss1017 жыл бұрын
LOL watching the engine come alive on the picker was like watching Frankenstein come alive. Cool vid
@dinodog27197 жыл бұрын
neat idea. frame flip. great build
@makalu8776 жыл бұрын
Hey Dizzo, you did an awesome job building your rat rod, and documenting the whole thing!!! Thank you so much for sharing this!
@DizzoMartell
6 жыл бұрын
Thanks for Watching!
@williamweigle83967 жыл бұрын
Another show stopper in the parade , I bet. Good build, man !
@donellmuniz5904 жыл бұрын
I tried building a rat once. I'm good at finding vehicles and parts. Not so good at following thru. I did the funnest part 1st; chopped the top (51 F1) 6 inches! That was cool. Then I got overwhelmed by the amount of work needed, and my lack of skills, tools, money, patience, and ambition. I sold it.
@JohnyTopaz7 жыл бұрын
Nice job - love the wooden floor & tunnel!!
@DizzoMartell
7 жыл бұрын
ARC-Angel Thanks!
@rca_garage29095 жыл бұрын
This build is completely awesome. everything has been uniquely built
@DizzoMartell
5 жыл бұрын
Thank you. That means a lot to me.
@mrknotthall6 жыл бұрын
Thanks for all your hard work in making this video.
@hoggwild37067 жыл бұрын
Lot of cool ideas I have never seen. Nice build
@gertjanverwindt37277 жыл бұрын
I like all the pretty rad rod and Music too
@AlphaMachina6 жыл бұрын
Music style brings me back to 1998-2002. Ahh, the nostalgia.
@DizzoMartell
6 жыл бұрын
Pretty darn close
@donfredette5334 жыл бұрын
All I can say is WOW.you knocked it out of the park up young man..great job
@DizzoMartell
4 жыл бұрын
Thanks for the kind words
@papawnanabubby50055 жыл бұрын
Awsome build. Great video with the sound turned all the way down.
@DizzoMartell
5 жыл бұрын
Or all the way up.
@peterpurpose7 жыл бұрын
Love it.. great build... marvellous woofer and magnificent sideburns.
@DizzoMartell
7 жыл бұрын
HAHA Thanks
@condeerogers58585 жыл бұрын
72 years old. Now 2 years old. "The Resurrection". Great job.
@DizzoMartell
5 жыл бұрын
Thanks for the kind words
@rune98647 жыл бұрын
I love rat rods. They all look mean as hell! The end result of yours is badass!
@garycoldiron58687 жыл бұрын
Great build and videoing! Thanks for sharing.
@DizzoMartell
7 жыл бұрын
Thanks for watching! and thanks for the compliments
@gilsongallego23286 жыл бұрын
Sweetest! Work of art
@unitedstatesofbuild49157 жыл бұрын
Awesome! That underslung frame is a very nice touch. I came here because of that ford cab. I am doing a 1947 on full air ride, I love the lines of this body style. Dizzo you did a lot with what you were given. great work
@DizzoMartell
7 жыл бұрын
Thanks! It was a fun build!
@mschiffel17 жыл бұрын
This is an "outside the box" build...I like it !
@djmav63055 жыл бұрын
one of the coolest rat rod builds I have seen looks epic
@DizzoMartell
5 жыл бұрын
Thank you. I appreciate that!
@carlosmurphy4u17 жыл бұрын
Love it, great rod and great music.
@DizzoMartell
7 жыл бұрын
Thanks for the comment. I appreciate it.
@pridmoreryan6 жыл бұрын
That's really cool man, thanks for documenting it.
@DizzoMartell
6 жыл бұрын
I hope to inspire
@slohand4you8357 жыл бұрын
well done......gr8 idea flippin the frame
@nicholaspatterson92755 жыл бұрын
BADASS!!! Think that sums it up! Great build
@DizzoMartell
4 жыл бұрын
Thank you!
@was913557 жыл бұрын
A job well done, and all from various pieces and parts!
@DizzoMartell
7 жыл бұрын
was91355 thanks!!
@gypsyking17617 жыл бұрын
i remember the Independent bikes in Boston but anyways that truck/rod rules and there is no better feeling than it's done on your own it's super cool
@jasontexada40617 жыл бұрын
props man good looking build
@carcrazycansgarage30737 жыл бұрын
Great video and inspiration
@TeleBass17 жыл бұрын
Excellent Job! I really enjoyed watching your video. Lot's of work and the truck looks great!
@gertjanverwindt37277 жыл бұрын
keep up with building the wheel rod really nice
@lewisaultman7 жыл бұрын
hell of a build bro! Love seeing the random Nissan drivetrain being utilized lol definitely unique I give it a 10
@StevenSmith-jq6tt4 жыл бұрын
Awesome video!!! 👍
@DizzoMartell
4 жыл бұрын
Thank you!
@datnotme99216 жыл бұрын
Damn that's badass ,don't forget me in your will. I'll take it!
@DizzoMartell
6 жыл бұрын
right on!!
@datnotme9921
6 жыл бұрын
Cool hoodie too. I rode those trucks since I was 13, I'm 44 now. That's one cool ride you built. 46 Ford is nice! The chrome reverse modulator kick down valve does look sic too. Ever plan in selling or trades? If not, you're welcome to place me in a will for a future caretaker,ownership. Lol
@davelowell30087 жыл бұрын
Excellent job young man.
@DizzoMartell
7 жыл бұрын
Dave Lowell thank you!
@sillyhead74416 жыл бұрын
That is awesome dude, simply awesome.
@DizzoMartell
6 жыл бұрын
Thank you!
@jasonmorgan50557 жыл бұрын
very nice well thought out
@richhardchoppers78697 жыл бұрын
Cool truck. inspiring video
@DizzoMartell
7 жыл бұрын
Thank you!
@donellmuniz5904 жыл бұрын
Underslung! I like the upside-down frame! Only seen one other rod built that way, a 27 Dodge (I think) with a 440, in Hot Rod magazine about 20 years ago.
@belly_nelly7 жыл бұрын
That's SO COOL. I love how simple everything is
@DizzoMartell
7 жыл бұрын
thank you! form follows function
@belly_nelly
7 жыл бұрын
Dizzo Martell I'm thinking about doing a similar build. How much was your engine and transmition?
@DizzoMartell
7 жыл бұрын
I bought a ranger and trailer with them in it. Was $650. sold the ranger and trailer for $650. So, Free!
@williamsmith80417 жыл бұрын
Love the frame flip.awesome job.I'd love to see more of your builds.replacing the music with some commentary would be excellent as well
@kevintucker33544 жыл бұрын
Cool hand built truck! Well done
@DizzoMartell
4 жыл бұрын
Thank you
@lyleharder21317 жыл бұрын
NICE RAT ROD BUILD DIZZO.. KILLER TUNES.. DO ANTHER ONE WHEN YOU GET A MINUTE..
@DizzoMartell
7 жыл бұрын
Sure thing. Here's the next possible build i picked up. facebook.com/photo.php?fbid=10209697962819568&set=pb.1044973566.-2207520000.1478192521.&type=3&theater
@michaelyale35715 жыл бұрын
Great truck dude
@DizzoMartell
4 жыл бұрын
Thank you
@MVanDii6 жыл бұрын
There was alot of creativity involved in this build. Some of it seems to be borne of necessity. I LOVE IT! The hole thing has more personality then all the new car lots combined!
@DizzoMartell
6 жыл бұрын
Thank you so much!
@paulkirkland1535
5 жыл бұрын
My thoughts exactly. What engine and tranny is being used?
@JJT1137 жыл бұрын
nice work man.
@ModifiedAdventureAustralia5 жыл бұрын
Looks awesome mate
@DizzoMartell
5 жыл бұрын
Thank you!
@utoobube7 жыл бұрын
Friggin awesome man! ...And, I love your choice of powerplant!
@DizzoMartell
7 жыл бұрын
Thanks! Yeah, I kind of stumbled upon it on Craigslist
@wiggymccrackin82407 жыл бұрын
I can't stop watching this video. never even heard of flipping the frame over like that. fucking genius
@DizzoMartell
7 жыл бұрын
Wiggy McCrackin thanks for the kind words!!
@1963impala2drWaylonWire7 жыл бұрын
watching this video again and again. awesome job.. on both!
@DizzoMartell
7 жыл бұрын
Thanks!! I appreciate the comment.
@stewartartistmanagement
6 жыл бұрын
Same here inspired me to start on a similar project
@ryanvance15734 жыл бұрын
kickass man. I’ll be following a lot of what you did 👌🏼👍🏼
@DizzoMartell
4 жыл бұрын
Thanks, just make sure safety is on your mind
@franksgarageandcustoms83215 жыл бұрын
I enjoyed watching the build. Some great ideas. Planning a rod in the future,as just fixing cars isnt cutting it any more.
@DizzoMartell
4 жыл бұрын
Building is more fun than fixing
@anonanonymous34566 жыл бұрын
Amazing work. Your a genius
@DizzoMartell
6 жыл бұрын
Thank you!
@doughintzsche32197 жыл бұрын
GREAT truck .....and video
@DizzoMartell
7 жыл бұрын
Thanks!
@richardhobday5266 жыл бұрын
Watched this twice. Great video, I hate videos of just pictures but the descriptions are GREAT. Thanks for the video and congrats on the build
@DizzoMartell
6 жыл бұрын
Thanks for the kind words
@MrRoman-lo6ih5 жыл бұрын
This gotta be the coolest rat build video I ever seen. Thank you.
@DizzoMartell
Жыл бұрын
Thank you!
@WayOffGrid7 жыл бұрын
BAD ASS BRO! Love the engine choice. Diesel all the way! Great video too, class act, Rod and vid! Building my '69 Pete Rat Rod with an 8v71 DD 2 stroke.
@DizzoMartell
7 жыл бұрын
NIce, Love a DD
@isaacparsons64863 жыл бұрын
Motivation will get you a long ways regardless what other people say to do that yourself is skill in its own people don’t understand! Great build and not over done!
@DizzoMartell
Жыл бұрын
Thank you, i agree
@nakedsphynxlake7 жыл бұрын
like the build man great job
@DizzoMartell
7 жыл бұрын
Thanks!
@samsvintageoutboards68473 жыл бұрын
This is so cool! I’ve be a searching the internet for inspiration because my dad and I are building a 38 dodge truck into a rat rod, all we have so far is the cab
@DizzoMartell
Жыл бұрын
Do it!
@franciscomontesdeoca53163 жыл бұрын
Epic truck
@bravojuan5597 жыл бұрын
bad ass build man, good job.
@DizzoMartell
7 жыл бұрын
bravojuan559 thank you!
@davidkerr43746 жыл бұрын
Dude. You have a talent... or 2. Great build, and great video!
@DizzoMartell
6 жыл бұрын
Haha. Thanks!!
@raysanchez96657 жыл бұрын
Good job. thumbs up.
@MH-cj1gz7 жыл бұрын
Awesome build! This was the first time seeing a flip frame build ... I wish your video was a 101 learning vid. sweet ride
@DizzoMartell
7 жыл бұрын
I tired to explain everything I did. But without a proper film crew and time, i couldn't... Thanks!
@dd29807 жыл бұрын
absolutely beautiful...I so can't wait to embark on my first rat rod..thank u for the inspiration...love everything about ur rod!!! #Respect #607
@DizzoMartell
7 жыл бұрын
#DB14 SpursVikings thanks! good luck on your build
@carlstclair9920
5 жыл бұрын
@@DizzoMartell Awesome looking rat rod very cool something very unique
@bmoreben68027 жыл бұрын
bad ass dude! the truck, music, editing, and of course the barn doors 😁
@DizzoMartell
7 жыл бұрын
b'moreben thanks!!
@arprecisionmodshop-14465 жыл бұрын
This is amazing..you've sure got some talent.
@DizzoMartell
5 жыл бұрын
Thanks, necessity is the mother of creation
@MikeL-vu7jo7 жыл бұрын
nice job Mr Dizzo ! always been my dream to build a rat rod , workin on a jeep now but who knows maybe some day , thanks for your vid also not a bad job welding you did , i always say my most valuable tools are my mig my press and my torches , if you don't have at least those tools your going to run into one dead end after another ,
@DizzoMartell
7 жыл бұрын
That's true. Time to buy a press!
@joehaiss7 жыл бұрын
Talented!
@RickSchade7 жыл бұрын
i love the track
@Stoopermoose7 жыл бұрын
Great to see the cattle dog! Don't see many outside of Australia. Top build man!
@DizzoMartell
7 жыл бұрын
Stoopermoose thanks! they're pretty great dogs.
@Stoopermoose
7 жыл бұрын
Mate, they are tuff as f@#k
@Stoopermoose
7 жыл бұрын
Just like your build
@DizzoMartell
7 жыл бұрын
Thanks!
@mta7987 жыл бұрын
very nice truck mate
@DizzoMartell
7 жыл бұрын
Thanks!
@brianburdine46207 жыл бұрын
This video has been so fun to watch and you have done an excellent job building your rat rod! I am now very tempted to quit my day job and build a rat rod.. Love it man.
@DizzoMartell
7 жыл бұрын
I wish i could quit my job and do this everyday. sadly, i cant...
@vincentrosa96316 жыл бұрын
Great job 🥇🥇🥇
@DizzoMartell
6 жыл бұрын
Thank you!
@Slapchop200006 жыл бұрын
Beautiful
@DizzoMartell
6 жыл бұрын
Thank you!
@merlin4real2 жыл бұрын
Fun video, even with the bro rock.
@DizzoMartell
2 жыл бұрын
Thanks. Everyone has different taste in music.
@merlin4real
2 жыл бұрын
@@DizzoMartell damn right. I'll stand up for your right to listen to corny music and you let me have my right to tease you for it.
@DizzoMartell
2 жыл бұрын
@@merlin4real Precisely!! Haha
@gearheadcustomsgarage21036 жыл бұрын
Badass job on the build brother! I love it. I'll be starting a build myself very soon. Thanks for sharing
@DizzoMartell
6 жыл бұрын
Thank you!!
@gearheadcustomsgarage2103
6 жыл бұрын
Dizzo Martell I'm picking up my cab this Saturday. I'm pretty pumped to get started.
@DizzoMartell
6 жыл бұрын
Cody Gill you should be. Keep me posted!
@gearheadcustomsgarage2103
6 жыл бұрын
Dizzo Martell I sure will
@joshstane59265 жыл бұрын
let me take a minute to tell you my ignorance. first and foremost this is amazing and the fact that you did all of it on your is just incredible. the frame flip blew my mind as my dad bought his cab seperately from the frame and built his own. i would think buying a frame would be easier but hard to find. he just built his own from scratch. again, blew my mind. and last! i almost commented (thought to myself first) "wow, that dog must really love you to be laying/sleeping there through all that noise and sparks and stuff." then i thought to myself. wait.... he literally just told us "sonic" is deaf LOL jesus...
@DizzoMartell
5 жыл бұрын
Thanks! It means a lot to me to get comments like this. Yeah, Sonic is a great dog.
@bobm72755 жыл бұрын
Not sure what to say, without sounding like a star struck school boy, Your build was amazing and it's actually "A Rat Rod" most, like maybe 97% of them are a Joke. You could and should write a book on building a rat, the correct way. I have never built a rat that low but if that is what you like, the frame flip was the essence of Rodding. My last rat was the equal of Your's and cost $0.97 a pound no cost for labour, admittedly I had an advantage, it was 58 years ago and I had no money. I think mine was better as it was mine. Spread the word "Rat Rods are back"
@DizzoMartell
4 жыл бұрын
Wow! thank you so much for that. I do agree this is more of what i consider a traditional rat rod. Not just a hot rod with flat black paint. Sounds like you have some stories to tell.
@alexmoncao11257 жыл бұрын
ficou linda meu amigo parabéns
@Brock_Landers7 жыл бұрын
That's awesome brother. I wish I could weld like that. Definitely an interesting engine choice too, it adds to the cool and unique factor. Everyone uses a old gas 6 cylinder or a Chevy 350. The intake manifold is what made me want to watch because I couldn't tell what it was from. Great build man.
@DizzoMartell
7 жыл бұрын
Thanks! yeah, i just stumbled across that motor on craigslist. Weird motor for sure.
@thestuffz7 жыл бұрын
well done!
@ryanfrank13096 жыл бұрын
It looks amazing... The welds on the other hand... I hope they don't fail. Just saw the welds towards the end and I agree those do look better. I'd still do more prep work with a bench grinder.
@DizzoMartell
6 жыл бұрын
Thanks, There aren't many welds in critical areas. Most everything was bolted for repair and removal purpose.
@ryanfrank1309
6 жыл бұрын
Fair enough haha. I commend you on finishing this beast. That would have taken a lot of man hours.
@rogerscott44976 жыл бұрын
Just bought a 43 Dodge cab and searching for some inspiration! Great job on the build and vlog.
@DizzoMartell
6 жыл бұрын
Thanks! good luck on your build
@ExiledPiasa7 жыл бұрын
i liked the sock rag joint.
@anonanonymous34566 жыл бұрын
Ssiicckk bro. Thats so awesome 😊
@DizzoMartell
6 жыл бұрын
Thank you!
@ZZUBBODIES7 жыл бұрын
wow nice. i love the figure it out as you go along build... im doing the same thing now... my first build. wish me luck...good job.
@DizzoMartell
7 жыл бұрын
Thanks, Good Luck. it can be fun!
@Flyingmikey626 жыл бұрын
God damn awesome!
@DizzoMartell
6 жыл бұрын
Thanks!!
@vicfirthify7 жыл бұрын
yeah I'm impressed,this shows determination,it doesn't take a fortune,but s a lot of work
@DizzoMartell
7 жыл бұрын
Thank you, I completely agree.
@LgK-ck1qv
7 жыл бұрын
Dizzo Martell amazing my dear friend!!!!! i dont speak english.i enjoy your video.i am colombian people.great job.
Пікірлер: 513
Needs fuzzy dice. Great job. Really cool.
@DizzoMartell
Жыл бұрын
Agreed
as insane amount of work went into this rat rod truck, I personally don't care for Rat Rods but my hat is off for you bud, excellent work, job well done, I know or have an idea about the amount of work that went into getting this vehicle to the stage your at, a lot of one off ideas and a damn fine job, I have built quite a few vehicles myself, none that come close to what you have done but I know how much work goes into building our pride and joy, I can only imagine how many late nights went into building this, I have been there done that, one vehicle that I built for a customer I literally worked 48 hours straight to get it ready for the paint shop to take over, this is bad ass bud!!!!!!!
@DizzoMartell
7 жыл бұрын
I'm surprised, (in a good way) that there are still people who can have positive feedback even though they don't care for the finished project. There were many long nights. good thing I don't need to do any body work... Thank you for the kind words.
A straight 6 looks so much better in this build. Thank you so much for not going 350 Chevy. Great job 👍🏽
@DizzoMartell
4 жыл бұрын
Thanks! i agree
You could have had a $100,000.00 rat rod if you hadn't insisted on doing everything yourself. Best I've seen in a long time, the sport needs more people like you, desperately.
@DizzoMartell
4 жыл бұрын
Thanks so much. Yes, we do need more people in this sport. especially younger people.
Incredible build! Thank you for documenting and sharing your progress. Was fun and inspiring to watch.
Very cool build. Nothing like the diesel version of the 280z engine...tough old engines.
@DizzoMartell
2 жыл бұрын
Great motor!
Awesome build, thanks for letting us see it
Yeah thats for sure Dizzo, what at awesome build, love the ratrod stuff, thanks man
Pretty Dam cool , love the upside down frame .
👍👍👍 awesome job man. I love the ratty diesel rods. especially the ones without the typical Cummins swaps.
LOL watching the engine come alive on the picker was like watching Frankenstein come alive. Cool vid
neat idea. frame flip. great build
Hey Dizzo, you did an awesome job building your rat rod, and documenting the whole thing!!! Thank you so much for sharing this!
@DizzoMartell
6 жыл бұрын
Thanks for Watching!
Another show stopper in the parade , I bet. Good build, man !
I tried building a rat once. I'm good at finding vehicles and parts. Not so good at following thru. I did the funnest part 1st; chopped the top (51 F1) 6 inches! That was cool. Then I got overwhelmed by the amount of work needed, and my lack of skills, tools, money, patience, and ambition. I sold it.
Nice job - love the wooden floor & tunnel!!
@DizzoMartell
7 жыл бұрын
ARC-Angel Thanks!
This build is completely awesome. everything has been uniquely built
@DizzoMartell
5 жыл бұрын
Thank you. That means a lot to me.
Thanks for all your hard work in making this video.
Lot of cool ideas I have never seen. Nice build
I like all the pretty rad rod and Music too
Music style brings me back to 1998-2002. Ahh, the nostalgia.
@DizzoMartell
6 жыл бұрын
Pretty darn close
All I can say is WOW.you knocked it out of the park up young man..great job
@DizzoMartell
4 жыл бұрын
Thanks for the kind words
Awsome build. Great video with the sound turned all the way down.
@DizzoMartell
5 жыл бұрын
Or all the way up.
Love it.. great build... marvellous woofer and magnificent sideburns.
@DizzoMartell
7 жыл бұрын
HAHA Thanks
72 years old. Now 2 years old. "The Resurrection". Great job.
@DizzoMartell
5 жыл бұрын
Thanks for the kind words
I love rat rods. They all look mean as hell! The end result of yours is badass!
Great build and videoing! Thanks for sharing.
@DizzoMartell
7 жыл бұрын
Thanks for watching! and thanks for the compliments
Sweetest! Work of art
Awesome! That underslung frame is a very nice touch. I came here because of that ford cab. I am doing a 1947 on full air ride, I love the lines of this body style. Dizzo you did a lot with what you were given. great work
@DizzoMartell
7 жыл бұрын
Thanks! It was a fun build!
This is an "outside the box" build...I like it !
one of the coolest rat rod builds I have seen looks epic
@DizzoMartell
5 жыл бұрын
Thank you. I appreciate that!
Love it, great rod and great music.
@DizzoMartell
7 жыл бұрын
Thanks for the comment. I appreciate it.
That's really cool man, thanks for documenting it.
@DizzoMartell
6 жыл бұрын
I hope to inspire
well done......gr8 idea flippin the frame
BADASS!!! Think that sums it up! Great build
@DizzoMartell
4 жыл бұрын
Thank you!
A job well done, and all from various pieces and parts!
@DizzoMartell
7 жыл бұрын
was91355 thanks!!
i remember the Independent bikes in Boston but anyways that truck/rod rules and there is no better feeling than it's done on your own it's super cool
props man good looking build
Great video and inspiration
Excellent Job! I really enjoyed watching your video. Lot's of work and the truck looks great!
keep up with building the wheel rod really nice
hell of a build bro! Love seeing the random Nissan drivetrain being utilized lol definitely unique I give it a 10
Awesome video!!! 👍
@DizzoMartell
4 жыл бұрын
Thank you!
Damn that's badass ,don't forget me in your will. I'll take it!
@DizzoMartell
6 жыл бұрын
right on!!
@datnotme9921
6 жыл бұрын
Cool hoodie too. I rode those trucks since I was 13, I'm 44 now. That's one cool ride you built. 46 Ford is nice! The chrome reverse modulator kick down valve does look sic too. Ever plan in selling or trades? If not, you're welcome to place me in a will for a future caretaker,ownership. Lol
Excellent job young man.
@DizzoMartell
7 жыл бұрын
Dave Lowell thank you!
That is awesome dude, simply awesome.
@DizzoMartell
6 жыл бұрын
Thank you!
very nice well thought out
Cool truck. inspiring video
@DizzoMartell
7 жыл бұрын
Thank you!
Underslung! I like the upside-down frame! Only seen one other rod built that way, a 27 Dodge (I think) with a 440, in Hot Rod magazine about 20 years ago.
That's SO COOL. I love how simple everything is
@DizzoMartell
7 жыл бұрын
thank you! form follows function
@belly_nelly
7 жыл бұрын
Dizzo Martell I'm thinking about doing a similar build. How much was your engine and transmition?
@DizzoMartell
7 жыл бұрын
I bought a ranger and trailer with them in it. Was $650. sold the ranger and trailer for $650. So, Free!
Love the frame flip.awesome job.I'd love to see more of your builds.replacing the music with some commentary would be excellent as well
Cool hand built truck! Well done
@DizzoMartell
4 жыл бұрын
Thank you
NICE RAT ROD BUILD DIZZO.. KILLER TUNES.. DO ANTHER ONE WHEN YOU GET A MINUTE..
@DizzoMartell
7 жыл бұрын
Sure thing. Here's the next possible build i picked up. facebook.com/photo.php?fbid=10209697962819568&set=pb.1044973566.-2207520000.1478192521.&type=3&theater
Great truck dude
@DizzoMartell
4 жыл бұрын
Thank you
There was alot of creativity involved in this build. Some of it seems to be borne of necessity. I LOVE IT! The hole thing has more personality then all the new car lots combined!
@DizzoMartell
6 жыл бұрын
Thank you so much!
@paulkirkland1535
5 жыл бұрын
My thoughts exactly. What engine and tranny is being used?
nice work man.
Looks awesome mate
@DizzoMartell
5 жыл бұрын
Thank you!
Friggin awesome man! ...And, I love your choice of powerplant!
@DizzoMartell
7 жыл бұрын
Thanks! Yeah, I kind of stumbled upon it on Craigslist
I can't stop watching this video. never even heard of flipping the frame over like that. fucking genius
@DizzoMartell
7 жыл бұрын
Wiggy McCrackin thanks for the kind words!!
watching this video again and again. awesome job.. on both!
@DizzoMartell
7 жыл бұрын
Thanks!! I appreciate the comment.
@stewartartistmanagement
6 жыл бұрын
Same here inspired me to start on a similar project
kickass man. I’ll be following a lot of what you did 👌🏼👍🏼
@DizzoMartell
4 жыл бұрын
Thanks, just make sure safety is on your mind
I enjoyed watching the build. Some great ideas. Planning a rod in the future,as just fixing cars isnt cutting it any more.
@DizzoMartell
4 жыл бұрын
Building is more fun than fixing
Amazing work. Your a genius
@DizzoMartell
6 жыл бұрын
Thank you!
GREAT truck .....and video
@DizzoMartell
7 жыл бұрын
Thanks!
Watched this twice. Great video, I hate videos of just pictures but the descriptions are GREAT. Thanks for the video and congrats on the build
@DizzoMartell
6 жыл бұрын
Thanks for the kind words
This gotta be the coolest rat build video I ever seen. Thank you.
@DizzoMartell
Жыл бұрын
Thank you!
BAD ASS BRO! Love the engine choice. Diesel all the way! Great video too, class act, Rod and vid! Building my '69 Pete Rat Rod with an 8v71 DD 2 stroke.
@DizzoMartell
7 жыл бұрын
NIce, Love a DD
Motivation will get you a long ways regardless what other people say to do that yourself is skill in its own people don’t understand! Great build and not over done!
@DizzoMartell
Жыл бұрын
Thank you, i agree
like the build man great job
@DizzoMartell
7 жыл бұрын
Thanks!
This is so cool! I’ve be a searching the internet for inspiration because my dad and I are building a 38 dodge truck into a rat rod, all we have so far is the cab
@DizzoMartell
Жыл бұрын
Do it!
Epic truck
bad ass build man, good job.
@DizzoMartell
7 жыл бұрын
bravojuan559 thank you!
Dude. You have a talent... or 2. Great build, and great video!
@DizzoMartell
6 жыл бұрын
Haha. Thanks!!
Good job. thumbs up.
Awesome build! This was the first time seeing a flip frame build ... I wish your video was a 101 learning vid. sweet ride
@DizzoMartell
7 жыл бұрын
I tired to explain everything I did. But without a proper film crew and time, i couldn't... Thanks!
absolutely beautiful...I so can't wait to embark on my first rat rod..thank u for the inspiration...love everything about ur rod!!! #Respect #607
@DizzoMartell
7 жыл бұрын
#DB14 SpursVikings thanks! good luck on your build
@carlstclair9920
5 жыл бұрын
@@DizzoMartell Awesome looking rat rod very cool something very unique
bad ass dude! the truck, music, editing, and of course the barn doors 😁
@DizzoMartell
7 жыл бұрын
b'moreben thanks!!
This is amazing..you've sure got some talent.
@DizzoMartell
5 жыл бұрын
Thanks, necessity is the mother of creation
nice job Mr Dizzo ! always been my dream to build a rat rod , workin on a jeep now but who knows maybe some day , thanks for your vid also not a bad job welding you did , i always say my most valuable tools are my mig my press and my torches , if you don't have at least those tools your going to run into one dead end after another ,
@DizzoMartell
7 жыл бұрын
That's true. Time to buy a press!
Talented!
i love the track
Great to see the cattle dog! Don't see many outside of Australia. Top build man!
@DizzoMartell
7 жыл бұрын
Stoopermoose thanks! they're pretty great dogs.
@Stoopermoose
7 жыл бұрын
Mate, they are tuff as f@#k
@Stoopermoose
7 жыл бұрын
Just like your build
@DizzoMartell
7 жыл бұрын
Thanks!
very nice truck mate
@DizzoMartell
7 жыл бұрын
Thanks!
This video has been so fun to watch and you have done an excellent job building your rat rod! I am now very tempted to quit my day job and build a rat rod.. Love it man.
@DizzoMartell
7 жыл бұрын
I wish i could quit my job and do this everyday. sadly, i cant...
Great job 🥇🥇🥇
@DizzoMartell
6 жыл бұрын
Thank you!
Beautiful
@DizzoMartell
6 жыл бұрын
Thank you!
Fun video, even with the bro rock.
@DizzoMartell
2 жыл бұрын
Thanks. Everyone has different taste in music.
@merlin4real
2 жыл бұрын
@@DizzoMartell damn right. I'll stand up for your right to listen to corny music and you let me have my right to tease you for it.
@DizzoMartell
2 жыл бұрын
@@merlin4real Precisely!! Haha
Badass job on the build brother! I love it. I'll be starting a build myself very soon. Thanks for sharing
@DizzoMartell
6 жыл бұрын
Thank you!!
@gearheadcustomsgarage2103
6 жыл бұрын
Dizzo Martell I'm picking up my cab this Saturday. I'm pretty pumped to get started.
@DizzoMartell
6 жыл бұрын
Cody Gill you should be. Keep me posted!
@gearheadcustomsgarage2103
6 жыл бұрын
Dizzo Martell I sure will
let me take a minute to tell you my ignorance. first and foremost this is amazing and the fact that you did all of it on your is just incredible. the frame flip blew my mind as my dad bought his cab seperately from the frame and built his own. i would think buying a frame would be easier but hard to find. he just built his own from scratch. again, blew my mind. and last! i almost commented (thought to myself first) "wow, that dog must really love you to be laying/sleeping there through all that noise and sparks and stuff." then i thought to myself. wait.... he literally just told us "sonic" is deaf LOL jesus...
@DizzoMartell
5 жыл бұрын
Thanks! It means a lot to me to get comments like this. Yeah, Sonic is a great dog.
Not sure what to say, without sounding like a star struck school boy, Your build was amazing and it's actually "A Rat Rod" most, like maybe 97% of them are a Joke. You could and should write a book on building a rat, the correct way. I have never built a rat that low but if that is what you like, the frame flip was the essence of Rodding. My last rat was the equal of Your's and cost $0.97 a pound no cost for labour, admittedly I had an advantage, it was 58 years ago and I had no money. I think mine was better as it was mine. Spread the word "Rat Rods are back"
@DizzoMartell
4 жыл бұрын
Wow! thank you so much for that. I do agree this is more of what i consider a traditional rat rod. Not just a hot rod with flat black paint. Sounds like you have some stories to tell.
ficou linda meu amigo parabéns
That's awesome brother. I wish I could weld like that. Definitely an interesting engine choice too, it adds to the cool and unique factor. Everyone uses a old gas 6 cylinder or a Chevy 350. The intake manifold is what made me want to watch because I couldn't tell what it was from. Great build man.
@DizzoMartell
7 жыл бұрын
Thanks! yeah, i just stumbled across that motor on craigslist. Weird motor for sure.
well done!
It looks amazing... The welds on the other hand... I hope they don't fail. Just saw the welds towards the end and I agree those do look better. I'd still do more prep work with a bench grinder.
@DizzoMartell
6 жыл бұрын
Thanks, There aren't many welds in critical areas. Most everything was bolted for repair and removal purpose.
@ryanfrank1309
6 жыл бұрын
Fair enough haha. I commend you on finishing this beast. That would have taken a lot of man hours.
Just bought a 43 Dodge cab and searching for some inspiration! Great job on the build and vlog.
@DizzoMartell
6 жыл бұрын
Thanks! good luck on your build
i liked the sock rag joint.
Ssiicckk bro. Thats so awesome 😊
@DizzoMartell
6 жыл бұрын
Thank you!
wow nice. i love the figure it out as you go along build... im doing the same thing now... my first build. wish me luck...good job.
@DizzoMartell
7 жыл бұрын
Thanks, Good Luck. it can be fun!
God damn awesome!
@DizzoMartell
6 жыл бұрын
Thanks!!
yeah I'm impressed,this shows determination,it doesn't take a fortune,but s a lot of work
@DizzoMartell
7 жыл бұрын
Thank you, I completely agree.
@LgK-ck1qv
7 жыл бұрын
Dizzo Martell amazing my dear friend!!!!! i dont speak english.i enjoy your video.i am colombian people.great job.