I absolutely love these bikes particularly this one. I've wanted to build one for years now and your videos have really helped me with some struggles I've had trying to brain storm on making it work. I hope more content and coverage comes of these beautiful builds of yours I absolutely love them and cannot get enough of them.

Hi just have to say that is the best patina look I've seen on a bile. and I am an antique restorer. Best Wishes Dee

@EDGClassics

Жыл бұрын

Thank you very much!! I really appreciate that.

Nice patina job brother. Thank you for filling everyone in on your secrets. awesome bike over all🤙🏻 🚴🏻💨✨

I wish youd make more videos like this! I eat this stuff up! I appreciate your honesty with how they were built! BUILD ANOTHER ONE! 🤘😁

@EDGClassics

2 жыл бұрын

I’ve built a number of them. I just didn’t make a video for each one. I need to make some more though. Thanks!

you know its good content when I'm in the workshop and watching at 4am in the UK. I use wood stain on my builds after paint. it dries quick and hard wearing. followed you on Instagram. keep up the good work chief

You are exactly right about I want to build a bikes your own way make them look the way you want? Cuz look how awesome that one looks!!

Excellent build and help, thankyou

@EDGClassics

Жыл бұрын

Thank you!

Hello, I am from Argentina, I did a Board Track Racer. your motorcycle is great

@cesarmena6012

3 жыл бұрын

kzread.info/dash/bejne/nXZl09ujeciTk7w.html&ab_channel=cesarmena

@EDGClassics

3 жыл бұрын

Thank you!

That is awesome sir.

@EDGClassics

2 ай бұрын

Thank you!

For the life of me I can’t source and assemble that Jack shaft. I’m not giving up! LOVE this bike and these videos! Thank you! 👍👍

@EDGClassics

2 жыл бұрын

The supply chain has been a little tricky lately. I’ve been having to buy those parts off eBay because one source can’t keep them in stock. Message me via FB Messenger and I’ll try and send you some links. EDG Classics. Thanks!

Nice work, I like that Bikes 👍 Greetings from Germany

@EDGClassics

2 жыл бұрын

Thank you!

like everyone else has said = awesome and love the passion /information

Great job, great little video mate.

I would love to see more board track racers... maybe try doing a flying merkel ? Just an idea... I love your work and it’s really making me want to build something cool!

Good job! Stevo!

You did a fantastic job on that dude. I reallllllllly like it.

@EDGClassics

2 жыл бұрын

Thank you!!

Great video Steve, love your mentoring and input on the Facebook group Boardtrack Tribute Society

@EDGClassics

3 жыл бұрын

I appreciate that! I just wanted to help inspire a few mew builders and maybe share some different ideas for the experienced guys. Thanks again!

@mikehasuga4959

3 жыл бұрын

@@EDGClassics My buddy, Jeff and I are on our own builds. I'm also restoring two early Simplex cycles.

@EDGClassics

3 жыл бұрын

@@mikehasuga4959 I love those early Simplex bikes!!

Superb!

I like this bike. Nice paint job. I use a hockey stick tape for handlebar on my bike.

@EDGClassics

3 жыл бұрын

Thanks! I still want to put a video together on the way I get the patina look.

love the concept hope mine turns out half as nice as yours . waiting on parts but I'm anxious to get started . i want to make mine belt drive

@EDGClassics

3 жыл бұрын

That’s great! Keep us updated!

Bloody good work there brother.

@EDGClassics

2 жыл бұрын

Thank you very much!

Muito bom teu trabalho amigo parabéns

Source for the gas tank. Great bike.

@EDGClassics

3 жыл бұрын

I make the tanks myself from sheet metal purchased at Home Depot.

@mikehasuga4959

3 жыл бұрын

@@EDGClassics Are U selling them??? Send me info and contact info if you are.

@EDGClassics

3 жыл бұрын

@@mikehasuga4959 you can send me a message via FB messenger. You can find me under EDG Classics. Just know that I usually make the tanks once I have the frame. Sometimes even the slightest differences in the frame dimensions will cause the tank to have to be make specifically for that frame.

Would it be possible to get a basic parts list with parts suppliers that you used? Frame, fork, wheels etc. thanks.

Yo Mr G.

Hello Steve. I love your bikes and videos. I have an indian btr with a 196 that I've had since December and I can't get the carb to idle down no matter how I adjust it. I've had 3 different carbs on it and I'm lost. What carb do you use on your 196? Also, what do you use for the motor brace mounted to the front of the loop? Thanks again

@EDGClassics

3 жыл бұрын

Hello Daniel! Thanks for the kind words! I’m sorry about your carb. I’ve had the best luck with the Honda replacement carbs. They have a few more adjustment capabilities thank the stock ones. It’s hard to determine why your idle won’t come down without seeing your setup but could you possibly have an air leak somewhere near the intake or an air vent plugged/capped off? Those would cause an issue with the idle for sure. As for the braces, I usually make my own using miscellaneous metal and made specifically for the engine and frame I’m using.

Your bike is awesome! I have some questions, where I can write you? Thanks and greetings from Italy!

@EDGClassics

2 жыл бұрын

Thank you very much! You can message me on Face messenger. I’m available at EDG Classics.

@riccardocomini2506

2 жыл бұрын

@@EDGClassics thank you, see you soon!!!

Where do I get a frame like that? Im running a preditor 212cc motor.

@EDGClassics

6 ай бұрын

This frame came from Harken Cycles. Moto Madness also make a good frame.

Great bike, lm want build a similar ,do you can give me the link the name to buy the front suspension in ebay,and how can bend the pipes, in thd fra.e ,lm look to diferents ideas thank you.

@EDGClassics

3 жыл бұрын

www.ebay.com/itm/NEW-Monark-Springer-Harley-Davidson-Style-Springer-Bicycle-Fork-26/273456811902?hash=item3fab4bcf7e:g:-H4AAOSwvfZaD4E8

@EDGClassics

3 жыл бұрын

I did not bend the frame tubes. This frame was made by Harken Cycles.

How do you build your frames to use old bicycle frames or do you make it from scratch

@mozezcen-valley7555

3 жыл бұрын

By the way the gas tank is spot-on looks really cool before looking at your videos I was thinking to do something similar with the knobs but I'll look around at different board tracks models and see what I like Harley-Davidson looks amazing but that's not the type of bike I'm building at the moment

@EDGClassics

3 жыл бұрын

The frames I use are NOT bicycles frames. They are build specifically for these type of motor bikes. This frame was made by Harken Cycles.

@EDGClassics

3 жыл бұрын

@@mozezcen-valley7555 thanks! I make the tanks myself. Take your time and I’m sure your tank and bike will be great! Be sure to post pics or a video of your work!

I dont want to use the honda engine. Do you think a Briggs and Stratton 5hp engine would work?

@EDGClassics

2 жыл бұрын

I’ve seen plenty of other builders use the Briggs engines. They are very dependable and you can easily make one work on your frame. I’m sure a few minor adjustments will have to be made but you can definitely make it work. Good luck!

Were you getting frame at ? Are you making them ?

@EDGClassics

3 жыл бұрын

It depends on the bike that I’m building. This is a Harken Cycles frame.

excuse me,what type of engine is it or was it.?

@EDGClassics

3 жыл бұрын

On this bike, I used a Honda GC190. I’ve used the GC160 on other builds as well. Both engines have worked well for me.

Frame? Worksman, harken, sportsman?

@EDGClassics

Жыл бұрын

This frame was by Harken.

👏👏👏👏🇧🇷👍👍

what flywheel are you running

@EDGClassics

3 жыл бұрын

It’s a GC190 stock flywheel.

do you sell a roller?

@EDGClassics

Жыл бұрын

I’ve sold bikes I completed before, but never a roller. I’m.not opposed to it though.

Let me ask you this question ❓❓ did it come out the way you picktued it in your mind

@EDGClassics

7 ай бұрын

It turned out better than I expected. They are fun to ride and people love checking them out.