Drill a hole in the can and tap a tire valve stem in that hole. Then you can jusy refill the can with a bike pump.
@kirishima6383 жыл бұрын
I started with one of these. Still have it. Three problems with these: 1) You cannot control the pressure at all. It comes out in spits and spurts making it useless for fine work. And of course the pressure drops as the can runs out. 2) It’s an aerosol which means the gaseous crap used as a paint medium ends up on your model. 3) The brush is not gravity fed meaning you have to waste a lot of paint in the bottle for it to be picked up. Just do yourself a favour and get a gravity fed brush and a compressor.
@TheForbiddenMoon
Жыл бұрын
its basically just spray paint at this point with extra steps
@GenuineRage
Жыл бұрын
@@TheForbiddenMoon funnily enough prevail makes aerosol pods that do exactly this in a spray can form. i work in a paint department, and whenever ive seen them somewhere theyve piqued my interest. but i always think to myself how inconsistent they must be, and that's on top of how inconsistent spray cans can be when made properly.
@palldut29753 жыл бұрын
Cool video! I always wanted to see what happens when you use this revell airbrush kit. Its too expensive to use it, im happy that I didnt bought that crap earlier, so now I can have mini compressor and an ultra just like you😀 Thanks for the video, its very informative! Keep up the good work😀
@Captain_Draco2 ай бұрын
I got one of these E91s with a secondhand setup of the compressor with a G22 and G25 which I use pretty often, but never got around to using this one. I have a large 3D print I need to prime and paint and figured the larger volume of the syphon feed jar would come in handy. I wish you'd have tried the airbrush with a compressor for a comparison.
@WorldPowerLabs Жыл бұрын
I have the same cheap airbrush and even when used with a compressor, it has issues with spraying consistently.
@BelindaHowe2 жыл бұрын
Thank you
@Tess_untamedАй бұрын
You should put " AIR CAN " in warm water while using it, so it doesn't ice up.
@LassetUnsSpielen3 ай бұрын
thanks for suffering. the only use i can see in the spray-can-setup is that theres no loud compressor working, so you could work at night
@johnh75002 жыл бұрын
It's expensive ok but the gravity issue you can solve with an other vessel for gravity and upside down the device no big deal!!! And of course use a mini compressor.
@thejewelrygeek63832 жыл бұрын
I will be grateful for your advice. I would like to paint small jewelry parts made of silver and gold. What do think would be the best airbrush kit for this. Thanks ☺️
@StaticModel
2 жыл бұрын
Hi, I think airbrushing is not the right technique for painting mentioned material. Different kind of metal alloys require chemical type painting, by etching, anodizing etc... But if you still would like to go with airbrushing, something like Iwata micron series or h&s evolution with 0.15 needle should be used. Also you will need special primmer that may damage such alloys...
@tuliobriceno6218 Жыл бұрын
Donde puedo comprar el adaptador para la lata de spray?
@BadLuckJohnny2 жыл бұрын
My hose just keeps popping out everytime I connect it. I don’t understand what I’m doing wrong I keep wasting air
@StaticModel
2 жыл бұрын
This kind of setup is really not recommended for extended use. It has lots of flaws, and poor hose connection is one of them.
@LesserDragonYT2 жыл бұрын
Is there anyway to attatch this to a mini compressor though?
@StaticModel
2 жыл бұрын
Attach airbrush? You can use press fit connectors, or adapters.
@LemurKrazy
2 жыл бұрын
Since it's a copy of the Badger 350 it has a badger size thread - you would then need a Badger to Iwata 1/8 BSP hose or Badger to 1/4 BSP hose depending on the size of compressor you have. Either way the connectors/hose will cost you more than what the airbrush is worth.
@Nishapooh77 Жыл бұрын
Wheee did you get the pressure can from
@StaticModel
Жыл бұрын
from here amzn.to/3DoTOdT
@IT5DAYY2 жыл бұрын
Where can I get that can
@StaticModel
2 жыл бұрын
Try looking at your local hobby store.
@giancarloterrin185011 ай бұрын
Che tipo di pittura si può usare??
@LaurelmeansVictory
Күн бұрын
It comes with the airbrush
@kiwirambob2 жыл бұрын
compressed air cans cost truck loads ...
@StaticModel
2 жыл бұрын
Agree.
@BigAndTall6662 жыл бұрын
Chinese crap, a Badger #350 knock-off, BUY ORIGINAL!!!
Пікірлер: 29
Drill a hole in the can and tap a tire valve stem in that hole. Then you can jusy refill the can with a bike pump.
I started with one of these. Still have it. Three problems with these: 1) You cannot control the pressure at all. It comes out in spits and spurts making it useless for fine work. And of course the pressure drops as the can runs out. 2) It’s an aerosol which means the gaseous crap used as a paint medium ends up on your model. 3) The brush is not gravity fed meaning you have to waste a lot of paint in the bottle for it to be picked up. Just do yourself a favour and get a gravity fed brush and a compressor.
@TheForbiddenMoon
Жыл бұрын
its basically just spray paint at this point with extra steps
@GenuineRage
Жыл бұрын
@@TheForbiddenMoon funnily enough prevail makes aerosol pods that do exactly this in a spray can form. i work in a paint department, and whenever ive seen them somewhere theyve piqued my interest. but i always think to myself how inconsistent they must be, and that's on top of how inconsistent spray cans can be when made properly.
Cool video! I always wanted to see what happens when you use this revell airbrush kit. Its too expensive to use it, im happy that I didnt bought that crap earlier, so now I can have mini compressor and an ultra just like you😀 Thanks for the video, its very informative! Keep up the good work😀
I got one of these E91s with a secondhand setup of the compressor with a G22 and G25 which I use pretty often, but never got around to using this one. I have a large 3D print I need to prime and paint and figured the larger volume of the syphon feed jar would come in handy. I wish you'd have tried the airbrush with a compressor for a comparison.
I have the same cheap airbrush and even when used with a compressor, it has issues with spraying consistently.
Thank you
You should put " AIR CAN " in warm water while using it, so it doesn't ice up.
thanks for suffering. the only use i can see in the spray-can-setup is that theres no loud compressor working, so you could work at night
It's expensive ok but the gravity issue you can solve with an other vessel for gravity and upside down the device no big deal!!! And of course use a mini compressor.
I will be grateful for your advice. I would like to paint small jewelry parts made of silver and gold. What do think would be the best airbrush kit for this. Thanks ☺️
@StaticModel
2 жыл бұрын
Hi, I think airbrushing is not the right technique for painting mentioned material. Different kind of metal alloys require chemical type painting, by etching, anodizing etc... But if you still would like to go with airbrushing, something like Iwata micron series or h&s evolution with 0.15 needle should be used. Also you will need special primmer that may damage such alloys...
Donde puedo comprar el adaptador para la lata de spray?
My hose just keeps popping out everytime I connect it. I don’t understand what I’m doing wrong I keep wasting air
@StaticModel
2 жыл бұрын
This kind of setup is really not recommended for extended use. It has lots of flaws, and poor hose connection is one of them.
Is there anyway to attatch this to a mini compressor though?
@StaticModel
2 жыл бұрын
Attach airbrush? You can use press fit connectors, or adapters.
@LemurKrazy
2 жыл бұрын
Since it's a copy of the Badger 350 it has a badger size thread - you would then need a Badger to Iwata 1/8 BSP hose or Badger to 1/4 BSP hose depending on the size of compressor you have. Either way the connectors/hose will cost you more than what the airbrush is worth.
Wheee did you get the pressure can from
@StaticModel
Жыл бұрын
from here amzn.to/3DoTOdT
Where can I get that can
@StaticModel
2 жыл бұрын
Try looking at your local hobby store.
Che tipo di pittura si può usare??
@LaurelmeansVictory
Күн бұрын
It comes with the airbrush
compressed air cans cost truck loads ...
@StaticModel
2 жыл бұрын
Agree.
Chinese crap, a Badger #350 knock-off, BUY ORIGINAL!!!