The idea that anyone would use this to lock a real firearm is truly horrifying. 10/10 Halloween special.

@brentonlee5535

6 ай бұрын

What’s even more terrifying is how’s many people leave their firearms completely unsecured

@haroldasvelioniskis223

6 ай бұрын

These gun locks are like the Kensington lock (remember those?) on a laptop. It's to prevent casual theft or casual unauthorized use. The only way to properly secure any gun is a proper lock, or a proper gun safe.

@nothingsurprisesmeanymore

6 ай бұрын

Although there is a distinct chance that they would shoot themselves in the face unlocking it this way.

@davebigdog

6 ай бұрын

I would use it

@truthvfiction

6 ай бұрын

@@davebigdogWhere should we send flowers?

I find these gun lock tests to be an extremely important public service, thank you!

@HariSeldon913

6 ай бұрын

Though it would have been better to see it done on an actual (unloaded) firearm as it is pictured in the thumbnail.

@nervaaugustus7089

6 ай бұрын

@@HariSeldon913 While I agree that it would be nice to see it demonstrated with an actual firearm, it's not hard to see how an actual firearm would make it even easier, as the firearm would help to brace the lock, allowing for firmer, more concise strikes with the mallet.

@HariSeldon913

6 ай бұрын

@@user-zm7qz5fq2d Then you probably shouldn't have watched. I bet you also watch movie clips just so you can go to the comments and say the movie sucked.

@bartwaggoner2000

6 ай бұрын

@@user-zm7qz5fq2d I agree in general

@bartwaggoner2000

6 ай бұрын

@@HariSeldon913 ha ha I don't think Mr. Lawyer is willing to set such a bad example

Next thing we know there is gonna be a mallet for the covert companion.

@rodneymartin6154

6 ай бұрын

Urethane even!

@Tikuros

6 ай бұрын

As Adam Savage says in his book: Every tool is a hammer 😁

@ryanwaltos2206

6 ай бұрын

Used orange juice containers and old Red Bull cans too !

@liquidrockaquatics3900

6 ай бұрын

Those little spring loaded hinge pin punches are just the mini versions

@Verchiel_

6 ай бұрын

Covert companion! Now with a free pet rock to smack against the most useless locks.

"Timmy, what would you like to be when you grow up?" "A lock designer!" "Oh, so you like to help people to keep their things safe?" "No, I heard they have super low barrier to entry."

@kusazero

6 ай бұрын

I guess watching LPL videos is a "barrier".

@MikkoRantalainen

6 ай бұрын

Seems legit!

@MonkeyJedi99

6 ай бұрын

The last line was a great double pun!

@ayoungtricknamedjim5498

6 ай бұрын

​@@kusazeroThe OP of this comment was having a hard time with the English language. What he was trying to say is that the profession of creating locks is easy to get into because it takes very little skill to design a shitty lock.

@kusazero

6 ай бұрын

@@ayoungtricknamedjim5498 yep, the barrier of entry is watching LPL videos, instead of like, a university degree.

Two things to try with every lock: Hit the top/bottom of it with something and take a thin bendy piece of metal and jiggle it around inside.

@williamthatsmyname

6 ай бұрын

You forgot a plastic piece from an orange juice bottle like the last 2 videos 🤣

@limiv5272

6 ай бұрын

Also try a wave rake. If that works it's nothing but trash

@MikeDCWeld

6 ай бұрын

Don't forget comparing it to thumbnails from LPL videos!

@dwayne7356

6 ай бұрын

magnets for anything that would use electric solenoids

@stefanfrankel8157

6 ай бұрын

Then again, there's always the CIA approved non-slip screwdriver method. Don't laugh. Give it a try.

This is an Onnais SE Defender. It can be opened with an Onnais SE Defender.

@percevalzinzin5983

6 ай бұрын

Sounds McNally-ish :-)

@darkhippo6222

2 күн бұрын

Oh, Not naiss

I agree 1000%, gun safety is extremely important and these kinds of products should be held to a higher standard than they are right now.

@stefanfrankel8157

6 ай бұрын

1000 per 100? Does that really make sense to you?

@DustinHayre

6 ай бұрын

@@stefanfrankel8157 hyperbole? Does that not make sense to you?

@dh2032

6 ай бұрын

@@stefanfrankel8157 101%, is high enough, that is take as imposable, never to happen, as what your saying to, like going floor 101 on building with only 100 floors it's in posable, it's never going to happen? no mater what button panel says in the elevator/lift says? it not going to happen?

@TesserId

6 ай бұрын

Generally, I don't favor heavy regulation. But if we wait for conditions in which we can sue these companies, it will mean some number of children will have to die.

@cdub42

6 ай бұрын

​@@dh2032are you smelling toast?

When the urethane hammer comes out, you know it's going to be a short video

My wife works for the Consumer Product Safety Commission and I send her your videos from time to time based on safety related features. One of the types of products you review I definitely send her are gun locks that fail in these manors. She's able to pass the up the chain so that the govt can review them and possibly issue recalls. You've reviewed a lot of products that if failed could have major safety related conserns.

@DugrozReports

6 ай бұрын

Have any gone anywhere?

@TIGJOHNNYSILVA

6 ай бұрын

@@DugrozReports I want to know too :D

@Durwood71

6 ай бұрын

Knowing the efficiency of government bureaucracy, I expect they will issue a mandated recall in about a decade.

@DoubleDsDeliveries

6 ай бұрын

@DugrozReports I'd have to follow up. I know some gunsafes have been recalled this year. Whether my wife had anything to do with it I'm not sure. She'd likely pass them up the chain and wouldn't know the final outcome until the press release.

@DoubleDsDeliveries

6 ай бұрын

d71 haha this quote works well: "the wheels of justice turn slowly, but grind exceedingly fine"

To be fair, it did take him slightly longer to open it than it did for him to say its name. Not much longer, but that's still a step up from Masterlock.

@stefanfrankel8157

6 ай бұрын

It takes longer to say _Masterlock_ than _Onnais._ :o)

@pierowmania2775

6 ай бұрын

🤣🤣🤣

@BytebroUK

6 ай бұрын

I could stick a corned-beef tin key into a Masterlock and sneeze and it would open (depending on the model). At least yer man had to 'hit' this one!

@alphagt62

6 ай бұрын

It might prevent someone from picking the gun up and shooting it, at least give you time to react. But to prevent theft or misuse? Not even a little.

Brings a whole new meaning to Tap rack bang

@johnwilburn

6 ай бұрын

Goes along with "tap rack bang". Should be "move tap rack" and trigger locks shouldn't exist.

And remember, the lock doesn't have to come all the way off for the gun to become usable. You can use the locking bar to pull the trigger once it's loosened up a bit.

@penfold7800

6 ай бұрын

Or knock it accidentally and shoot yourself when unlocking it yourself.

@GamingWithNikolas

6 ай бұрын

Yup, but to be fair if the persion realizes hitting the side of the lock gets it one latch loose, and if it's as simple as shown, than I don't see a reasion to not just take the thing all the way off.

@goldenkurlz

6 ай бұрын

Correct me if I'm wrong but doesn't the lock bar go behind the trigger? Honest question as I don't own a trigger lock.

@fresnel149

6 ай бұрын

@@goldenkurlz usually not, not all triggers have room behind them for the bar (see: M1911), and the locks are designed to be universal.

@goldenkurlz

6 ай бұрын

@@fresnel149 makes sense thank you!

Lock company: "This lock should be secure." LPL: "Hammer time!"

No single person has done more to disillusion me about the world than LPL. I have done and seen a lot of things in my life, but this channel has really helped me gain a new perspective on life. Everything really is cake when you have the right knife. Thank you, LPL.

Your videos allowed me to help a person get back into their home after locking themselves out. ( Proof of residency provided by the property manager prior to making entry). Thank you for your videos!

You really hammered home the point.

The mallet is the equivalent of a wave rake.

@jjcc8379

6 ай бұрын

It's a (shock)wave rake.

@joedingo7022

6 ай бұрын

The piss hammer never gets old.

@gunsforevery1

6 ай бұрын

It’s the monkeys equivalent of a wave rake lol

@Mallchad

6 ай бұрын

It's worse than a wake rake, a wave rake requries a precision cut tool. Anything that requires a mallet means you can achieve the same by hitting it again a wall

@jordanwhite352

6 ай бұрын

They're both technically categorized as kinetic attacks so you're not too far off.

The main intrigue with these sorts of multiple-method-of-opening locks is always how LPL is gonna get into it.

@borttorbbq2556

6 ай бұрын

And apparently just percussive entry is typically enough

@homuraakemi103

6 ай бұрын

And he’ll do it twice to show you it wasn’t a fluke.

@BlaubartMT

6 ай бұрын

...and in this case, he didn't attack the key-way, the fingerprint reader, or the combination. He went with door #4. 🤣

@wickedcabinboy

6 ай бұрын

@@BlaubartMT - Yeah, the door the manufacturer didn't know existed.

@MonkeyJedi99

6 ай бұрын

Right? Will it be the hammer? The Lego min? The Red Bull can? The magnet? Harsh language?

Your service to the community pointing out these outrage flaws is truly awesome.

@Alex-ug9wx

6 ай бұрын

It’s insane how the US govt. doesn’t deal with these things themselves. I mean… anyone with a 3D printer and some basic knowledge could mass produce crappy locks like this… absolutely wild.

I will never get tired of these quick showcase videos. I wish you and Mrs. LPL all the best in life. Happy Halloween!

It reminds me an old intercom we had here in Poland in the 90s. If you knew where to hit it (my older neighbor taught me it), you could shake the relay to release the electric latch of the door and get into the building. It wasn't the safest system, but it was what it was. If someone was talking on the intercom, you could take your receiver up and hear what the neighbor was talking about.

Seems to be a fairly common weakness in many electronic locks: usually they cheap out and use a solenoid to open the lock, and that means they are spring loaded. Also, I would have liked to see this lock picked / raked / stared at sternly; most electronic locks have a mechanical bypass with a core of terrible quality. Good smart locks are rare as hens teeth.

@user-gx1rk8yw6l

6 ай бұрын

Remove the spring-loading so that the lock REMAINS open. Until deliberately locked again. Then it has become a deadbolt.

@user-db5qd3wd6z

6 ай бұрын

I'm an old git, all I think of when someone uses the word 'smart' when related to technology, is the name Maxwell Smart.

@johnopalko5223

6 ай бұрын

@@user-db5qd3wd6z I always thought "Smart technology" referred to the phone in his shoe.

@Bird_Dog00

6 ай бұрын

You could still make it mallet-safe with spring loaded bolts and solenoids. All you need is a second bolt blocking the main bolt. As long as they are oriented in different directions, tapping the lock on one side won't do you any good.

@user-gx1rk8yw6l

6 ай бұрын

@@Bird_Dog00 The more complicated things become, the more opssibilities crop up for things to go wrong or offer the bad people more ways to bypass security measures.

These demonstrations of design incompetence are valuable but certainly undermine my sense of security in everyday life.

Even if they didn't use a spring, it kinda looks like you can just destroy the lock using a hammer

@NuminorTheFool

6 ай бұрын

Yeah but then you can't put the lock back on it again once you've done what you need to do with it. Much harder to hide you've used the gun if the lock is destroyed.

@Toastybees

6 ай бұрын

@@NuminorTheFool Most people stealing guns aren't using them for themselves, they sell them to a black market broker like a crooked gun store owner and then whoever buys it can use it for a crime and dump it. Harder to trace back who stole it if there is no direct connection.

@foogod4237

6 ай бұрын

@@Toastybees Most people stealing guns could just cut off this sort of gun lock anyway (since they can just steal the lock with the gun and deal with it later). The primary value of a trigger lock is in preventing people who aren't supposed to be using the gun (children, etc) from using it without your knowledge or permission. Ideally, it shouldn't be removable at all, but if it can be removed and replaced without anybody knowing, that's actually much worse, because it means your kids might be playing with your guns repeatedly and you never even realize it until the day it ends up being fatal for somebody.

@TheQuark6789

6 ай бұрын

@@ToastybeesNo sort of trigger lock is meant to prevent theft; they’re meant to prevent accidents, especially from kids (the “curious adolescent”). This lock also fails at that.

@TheQuark6789

6 ай бұрын

Or to prevent a home invader from using the owner’s own gun against them.

oof, they'd better close up shop now. LPL doing more for the physical community than the manufactures that are supposed to be doing it

Thanks for the video. Every time I see a gun lock tested I am reminded of when I was a kid, in traction in the hospital with a badly broken arm. The kid in the next bed had been looking down the barrel of a gun while his brother was trying to pound a shell they found into the chamber. (the shell was the wrong size). He was a funny, clever kid that made my days in traction so much better. Then one day his bed was empty and when I asked where he was they said he had taken a turn during the night and was gone. So yes, kids will hammer on a gun. I'd like to see recommendations for some gun locks.

I just saw the 464 episode, and I'm glad to see that lovely 1911 is still with you, love the ported slide. Also thought your voice reminds me a lot of John Mullaney, and for some reason thought I'd share that in case it's entertaining

I can’t wait for lpl to find a lock so bad he just calmly says “guys, I can’t make this shit up” in his usual calm sounding demeanor

@Sembazuru

6 ай бұрын

I don't think he used those words, but one could certainly hear/feel it in the subtext on the recent video of the gun "safe" that could be defeated by popping the plastic handle out and reaching inside to remove the pistol.

@simongeard4824

6 ай бұрын

@@Sembazuru Yeah, that was a real gem. No need to even look at the lock... just break the poorly-attached handle off, and now you've got a hole in the front panel large enough to get a large handgun through.

Usually a double tap is used for taking down the bad guys not locks 😂

Lock: "I hope I won't get the wave rake treatment." LPL: *Grabs hammer

@SystemX1983

6 ай бұрын

Lock: "Hit me baby, one more time!" 😂

Sticking with tradition that 2m or less is just WHAT THE HELL IS WRONG WITH YOU levels of terrible in terms of locks, let alone firearm locks. I seriously love you for making these videos and pressuring these companies to do better.

I don't think anyone expected this to be a fluke after six separate hits opening it up. I think LPL just finds this one too much fun not to do twice.

@petergrunendahl8799

6 ай бұрын

…he wants to expand the video to more than a minute…😂

@BlaubartMT

6 ай бұрын

I was thinking the same thing. Each time it moved demonstrated it was working. The second time he hit it was the "let's do that again so you can see it was not a fluke" moment. Doing it again was basically saying "Let's do that six more times you can see the first six times the lock failed weren't flukes".

@Hexagonaldonut

6 ай бұрын

To be fair, just because the first hit moved it doesn't mean hitting it repeatedly is guaranteed to get it open! Well, except the different locking grooves are of the exact same geometry, so... yeah, actually, it does.

@alyx1a

6 ай бұрын

@@petergrunendahl8799 while your comment is mostly joking, for those unaware he tries to make his videos as SHORT as possible so it reaches the most people, he definitely doesn't pad out the time at all

As a kid, I learned very early to test locks and other security systems with taps, knocks and heavy hits to see if the system could be bypassed. One of my favorite things to knock, was pinball game coin doors! But I also found many other things that a mallet or hammer could coax a lock to open! But the new high strength magnets can also be used to open those locks when the cases are aluminum, and the bolt is steel! I have opened a store door with a magnet once! I wonder if your gun lock would be one of the magnetic failure locks?

Trigger locks, in general, are a bad idea. If you need that level of security, use a safe.

@Ceece20

6 ай бұрын

Trigger locks seem to be the worst idea for safety. If you don’t need the gun that much, put it in a safe. It’s not like you’ll be able to access the gun quicker than any well designed under the bed floor safe.

@keith6706

6 ай бұрын

@@Ceece20 The only purpose I can see for trigger locks is if you're transporting the gun, say a rifle in a case for a hunting trip, or something similar.

@Sembazuru

6 ай бұрын

@@keith6706 If transporting, it would probably be better to use a well designed... ummm... not a gun person here so I forget the exact terminology... A bolt lock? The type that runs up where the magazine would go and comes out of the open chamber. What ever that is called, at least one can tell that the gun is unloaded and unfireable from just looking at it w/o handling it. Can't visibly show that a gun is safe much better than that...

@johnwilburn

6 ай бұрын

@@Sembazuru Better still, don't let idiots, whom a chamber flag influences, handle your guns.

Just wanted to say I've been a picking enthusiast for a while (but no real practical skill) but have only owned a cheap kit from the big retailer whose name starts with "A" and couldn't even successfully open a Master No. 5 with it trying intermittently over the past several days. Then I ordered a Genesis. I just opened my No. 5 using a rake within 30 seconds on the first try. I am amazed. Quality (and the right tools) matter. (and no, I don't work for the company).

Three intended entry methods with potential weaknesses to exploit, and yet the lock didn’t even hold up long enough for any of them to matter. Incredible. XD

How are they able to market such a useless lock. You did save me hundreds on my door locks. After I showed my wife how easy it was to open them, she actually let me install the cheaper one. Saving me money. Thank you. Lol!

@johnwilburn

6 ай бұрын

People with no training will buy anything.

@brziperiod

6 ай бұрын

Speaking of door locks. I saw the one McNally milk jugged from those pieces of work amazon ad channels... And there was some members of the McNally Mafia in the comments lol

@BobBobson

6 ай бұрын

No regulation or quality standards.

@NEEDbacon

6 ай бұрын

TBH I always figured shitty gun locks were a matter of legality, not necessity.

That double tap though

You tell them LPL. They need to know how vulnerable those weapons are to prevent accidental deaths. Keep up the good work!

Not a gun owner here, and I wholeheartedly appreciate the emphasis on gun safety that you champion. Thank you.

Parents: teach yoir children gun safety. Its 99% more effective than any lock.

@johnstarkie9948

6 ай бұрын

Or don’t have any guns.

@johnopalko5223

6 ай бұрын

My dad's idea of gun security was, "Leave it alone!" And I did.

@johndoe-so2ef

6 ай бұрын

Absolutely. I was taught to use the weapons properly at a young age, Dad never needed locks

@johndoe-so2ef

6 ай бұрын

​@@johnstarkie9948okay lefty.

@johnopalko5223

6 ай бұрын

@@johndoe-so2ef That doesn't necessarily follow. One's desire to own a firearm or not doesn't define one's political beliefs. People are more nuanced than that. There are plenty of conservatives who choose not to own guns and there are many liberals who do. There are also many people who look at multiple issues and who may lean conservative in relation to some and liberal to others. Not everyone came out of a cookie cutter. And, if someone is concerned about their kids getting ahold of their firearms, choosing not to own said firearms effectively obviates the issue.

Dear LockPickingLawyer, I was wondering if you've ever thought of making some kind of international standards committee or some kind of best practices committee for locks? These companies keep making the same mistakes, and I don't understand. Thank you for another great video!

Long time viewer, first time commenter. Watching your videos saved my ass, I got locked into my bathroom while replacing the door handles, I had no way of opening the door after closing it with only the outside knob installed. I immediately got hit with claustrophobia since I had no tools and no phone to call for help but remembered how calm you are and broke a pair of crap tweezers in half in order to make tools to turn and unlock the door. Thanks so much.

Every lock manufacturer should have this guy on a retainer.

I'd sure like to see a video on "LPL Approved" showing the best gun locks, gun safes, bicycle locks, etc. Granted, there might be a category where none are undefeatable but there is always a best choice. Kinda like the Consumer Reports of security.

@user-gx1rk8yw6l

6 ай бұрын

An "LPL Approved" list/video is counterproductive. Such a list promotes perpetuating the laziness of us-people, of us who are too bleeping lazy to be educated in elementary safety considerations.

@johndoe-so2ef

6 ай бұрын

No lawyer is going to open himself up for the lawsuit after something happens. Lawyers know how corrupt lawyers are.

Great video and very informative.

Its a feature! For those who lost their key, memory, and finger at the same time

That lock is a horror show. Therefore, today was the perfect day to show it to us!!

Scary thing is that if adolecents were to get a hold of something they can’t open, the first thing they do is slam it in the ground

The old tap method works a treat here.

@SystemX1983

6 ай бұрын

It was designed as a lock, but it ended as piñata 😂

A free R&D channel this one.

Love how LPL shows off his huge gun collection. Really wish there was a good gun lock with a reliable fingerprint sensor for quick access.

The perfect lock for home defense! When precious seconds matter, the time you waste finding a key or remembering your easily-forgotten code could make the difference in saving Grandma's pearls and keeping your family together. Now, with the latest in Tap With Anything Technology (TM ) in the newly improved Onnais SE defender, your gun is never too far out of reach!

@Randon_Tain

6 ай бұрын

* Manufacture's Note: Do not drop locked and loaded gun as lock may loosen and also press trigger. (In self defense)

Wow! You hammered it! Imagine the face of the manufacturer/distributor of the lock, when they watch this video. I agree, this is not a bike shed lock; somebody could get in serious troubles after relying on this trigger lock. Greetings from the UK Anthony

@BobBobson

6 ай бұрын

The manufacturer almost certainly knows. It's an issue with a lot of solenoid operated locks.

@johndoe-so2ef

6 ай бұрын

​​@@BobBobson Knows, and doesn't give a f**k.... It's the Chinese way.

@Alex-ug9wx

6 ай бұрын

@@johndoe-so2efsold on the American market. Funny how that works, huh?

@johndoe-so2ef

6 ай бұрын

@@Alex-ug9wx funny is one word you could use, maybe not the one that I would choose...... Thanks Amazon.

@Alex-ug9wx

6 ай бұрын

@@johndoe-so2ef oh sorry… in case it wasn’t clear I was describing your child like naivety and understanding as funny, not the product itself. It is pretty funny how you’d sooner blame China than your country’s lack of regulation for the existence of the these locks.

I look forward to seeing each of your videos.

That is quite frightening! Thank you for yet another very interesting video. 👍

I really want to see LPL show off what he deems high quality locks. Especially for firearm security.

@jordanwhite352

6 ай бұрын

If you look back in his firearm lock videos, you will actually find him doing a video where he takes a lock and modifies it so that it's pretty secure for a firearm.

That’s not a bug, it’s a feature. They sell them to make money, not to actually work. That’s why they are “feature packed” so as to fool the customer into overpaying for nothing.

@ai4px

6 ай бұрын

That is actually the point. Every single trigger lock I’ve seen is terrible. They are there to keep honest people honest.

@jordanwhite352

6 ай бұрын

No they are there to make money off of people that for some reason coming from someone who owns firearms know the exact tree that the rubber of the handle of their firearm is made out of but cannot tell the difference between a multi-t-lock and a master lock number. 3.

@briancorbino2043

6 ай бұрын

@@jordanwhite352 - They also exist because many states mandate them.

@stolfygaming

2 ай бұрын

@@ai4px Yeah trigger locks don't stop dishonest people from just taking the gun with the lock still on, so they don't make anything better quality than master lock. I guess a location chip in a secure trigger lock would help with that, and would be pretty cool.

This channel has reminded me of another channel but couldn’t quite figure it out for years. But I have it; you and Not Just Bikes sound and speak so much alike.

the moment you said springlocked i out loud said “mallet.” love when you slam on them with the clear mallet

Love your choice in firearms. S&W. Im still tring to find a 2.0 metal full size.

I think it really just needs be good enough to keep kids form getting to it and playing with it. Because anyone who REALLY REALLY wants it, is going just saw Through any type of lock at the end of the day a lock is just a false sense of security. Has you shown over and over. If someone has the will, they will get past it.

Someone should invent a genuinely secure gun lock that can resist not just a curious teenager but a proper thief as well.

Six or seven hits with a mallet to open this. That's inexcusable for a lock designed to secure a *firearm.* Thank you for reviewing these gun locks and gun security cases; it really does go to show just how bad the lock industry is at securing weaponry.

Please do a series or a playlist on gun locks and safes so people can easily find them!

@jardex2275

6 ай бұрын

Going to his video list and searching gun or firearm will bring up most of them.

I feel the same way about gun safety, it’s like these folks don’t even try to care if the product works especially with firearms. Very shameful. Another awesome LPL video.

@user-gx1rk8yw6l

6 ай бұрын

Shameful in opting for convenience over security (spring-loading the cam to make locking not necessary).

@John.Flower.Productions

6 ай бұрын

They do not have to make quality products, since many jurisdictions require people to buy/use these worthless items. Competition makes people/companies offer better goods/services at better prices, not government regulations/mandates.

@bbrainstormer2036

6 ай бұрын

I think it’s at least possible that these are just made to appease safe storage laws in various states.

@user-gx1rk8yw6l

6 ай бұрын

@@John.Flower.Productions @bbrainstormer2036 So educating people (WHATEVER their function is) is a necessity.

@BlaubartMT

6 ай бұрын

Their attitude is probably first and foremost "We can sell this on Amazon for a profit", followed by "Anything is better than nothing", so they make something that is just a tiny bit above nothing. This may not actually be better than nothing, because it gives people a false sense of security/safety. For example, a person might have a decent gun safe, but if they "secure" it with this lock, they might be willing to leave their handgun out in the open where children could access it. Better to not have this piece of crap and secure your handgun in a real safe.

Why do companies waste so much time and energy. Just hire this guy.

At this point, I'm not sure if the locks that LPL didn't trash in a video are actually good, or that he just didn't get a chance to review them yet !!

@mechalith2791

6 ай бұрын

Given how long he's been making these without any apparent difficulty in finding new material, it's probably the latter in most cases.

@metalwolf112002

6 ай бұрын

On one hand I wish LPL would put out a "locks that don't suck" list, but I understand he would be hesitant to do that since it could be considered endorsement and in some states he could possibly be held liable.

@doomersnek3878

6 ай бұрын

@@metalwolf112002 The fact you can be held liable for merely endorsing a product is so idiotic.

@JerryB507

6 ай бұрын

If you're looking for a good gun lock, review LPL's gun lock videos and try his different methods on any you are thinking of buying.

Love the "3 DESIGNED open methods..." yeah, no brand wants to put "can be opened by picking or hitting it like a caveman" as a selling point :l

In general, every method of entry increases the attack surface and makes the lock less secure, but this one adds a common undocumented way to open it.

The plastic hammer always makes me chuckle 😂

I get why he didn't attach it to a gun (even an unloaded one) before smacking it several times, but I was still hoping to see it.

@davebigdog

6 ай бұрын

I would never use a hammer on a lock that's attached to a gun As soon as it loosen up it would slip and probably activate the trigger on one of the hits

@BFedie518

6 ай бұрын

@@davebigdog Exactly. That's why I understand why he didn't do it.

I'd be interested to see if it were as easy to apply the needed pressure and bang the lock if an actual gun (or something similarly sized and shaped for safety reasons) were in the way.

@chrispritchard7977

6 ай бұрын

The weight of the gun itself is probably enough to provide it's own pressure.

@awmustang

6 ай бұрын

@@chrispritchard7977 fair point

These are some of the most important videos you do. Someone thinking their firearm is safe with one of those on is scary

Remember guys, the best gun safety for your kids is teaching them proper respect for firearms

Imagine if someone dropped their locked gun down a flight of concrete steps - tap, tap, tap... Terrifying.

@mechalith2791

6 ай бұрын

It's unlikely to come apart *quite* that easily, it takes a bit of pressure outward to get the two halves to move apart in the window provided by each bump with the hammer (or on a stair), but it could definitely slip enough to reveal the vulnerability.

LPL needs to just straight-up make a lock design and see who he can get to produce.

@dannylukic6536

6 ай бұрын

If he's not already being paid to consult with lockmakers, he should be. If I operated one I'd have LPL on speed dial??

@dchil15

6 ай бұрын

He's already made a video of him designing a gun lock.

@jardex2275

6 ай бұрын

I wouldn't be surprised if he has already. He's just smart enough not to put a LPL endorsement on it.

@NEEDbacon

6 ай бұрын

I remember him being on decent terms with Paclock, so I'm sure they would do it. ANd honestly having the "LPL Designed Fuck off lock" would at the very least be a hell of a flagship product.

@Gubble-oq6dn

5 ай бұрын

Why would he? Someone will just end up breaking into it eventually and it will ruin his credibility.

The welcome return of the Urethane Mallet!

Honestly compared to a lot of gun locks on this channel, it's nice to see one that at least has a seemingly good path to being a decent lock assuming the other locking methods are up to snuff

Would be interesting to see what difficulties are added when attached to a gun. I imagine the grip required would add a little extra difficulty but probably not enough

@pesqair

6 ай бұрын

yeah he should be opening these in situ not in his hand like that.

@bertblankenstein3738

6 ай бұрын

Dear LPL, please repeat with safety device attached to (disarmed) gun.

I like how half the time he does even bother with picking these locks, they aren't worthy of his skill.

I'm always fascinated by these fancy locks that has multiple options to be unlocked (code, key, fingerprint). But simple solid taps on it works as well. It's like: wow. All these fancy options became USELESS. lol incredible

I bought one of those sentry safes to store some valuables in our RV. Unfortunately the battery died and even using a spare I couldn’t get it open. One switch blow of a hammer and that was it. Glad I found out the east way.

Do you also sell mallets, lego men, sticks, magnets and pieces of tin can as part of a lockpicking set? Those seem to be very common instruments these days,

It's not a bug it's a feature

The most lethal combination: spring locks and gun locks

Tap it hard enough and you can probably open it with itself. Safe to say who'd be the one to do that.

Do you have a list of products that you do recommend? Particularly gun locks or handgun safes.

Teaching your children proper firearms safety would be much more effective than this lock. Great job as always lpl!

Not to mention banging on something INSIDE THE TRIGGER GUARD!

now this, this is good informative content he makes.

If I had a nickel for every time LPL opened a lock with a mallet, I'd have two nickels. Which isn't a lot, but it's weird it happened twice

@andersjjensen

6 ай бұрын

Mostly any padlock that you can snap shut can be opened this way....

@mario199923

6 ай бұрын

@@andersjjensen i know.. I'm making a joke about LPL videos specifically

Can the mallet method be reasonably done if the lock is installed onto a gun ? Will you have enough space ?

@echomgm

6 ай бұрын

Well, when you decide to hit something that holds the trigger of a gun with a hammer, having space should be your last concern.

Great video, also nice pistol in the thumbnail. Keep up the great job LPL

Another appearance of the Performance Center 1911, beautiful

Funny how the gun locks always seem to be worse than the padlocks 🙄 (I know that their not, but the flaws are so bad sometimes)

@LeadTrumpet1

6 ай бұрын

Most of them are actually worse than the padlocks. The consequences for failure is so high that gun locks should be held to a much higher standard. This is a flaw I’d expect a toddler to accidentally discover. Adolescents have the internet where they can find videos to defeat locks.

@Alex-ug9wx

6 ай бұрын

@@LeadTrumpet1the lack of regulation truly is disturbing. I’d love to see how many accidental deaths occur each year (attributed to firearms, specifically trigger locks) and what the trend for this is? It seems at this point in time the world has been flooded with a huge influx of terrible locks and safes, so I think it would be interesting to see!

Uploaded 18 seconds ago. Yay.

@RealMTBAddict

6 ай бұрын

Yay what?

@vibingwithvinyl

6 ай бұрын

@@RealMTBAddict Yay for me being so early.

Gun safety is important but proceeded to hit a gun trigger lock with a hammer in an inaccurate test where the lock is not even attached to an imitation gun that can serve as a stand in. 😂

Great video LPL!!

Serious question. How easy is it to get outward pressure on this lock required to get the lock to come apart while on a firearm?

@TKNinja37

6 ай бұрын

I'd say you could just pull both parts of the lock, and strike the whole gun/lock assembly against a solid surface, and that'd work fine.