Wing nut can fix the iron chain
Cut PVC water pipe with drill bit
Electric drill chuck capable of stripping wires
Use a magnet to prevent the wrench from falling
Wing nut can fix the iron chain
Knock out the round dowel with pliers and hammer
Take out the broken round wooden tenon with screws
Remove wooden nails with electric drill chuck
Strip the wires with a utility knife
Secure the position of the bit with tape to prevent the bit from slipping
Secure the webbing with wooden nails
Tool wire binding method that will not loosen
Make a Hammer Tip Cover Using Hot Melt Glue and a Magnet
Install the plastic bottle cap on the electric drill to prevent scratching the surface
Make a spring with a drill and screwdriver