What is in my tool kit isn’t important, but how I got there is. I watched a bunch of KZread videos and built a loaded out kit in a maxpedition pouch. Eventually I kept track of what I was actually using and removed all the stuff that I never used. Now I have a tool kit that “fits me”, and haven’t had to change anything in a couple years.

@jimbeaux89

Жыл бұрын

I did the same exact thing with my Maxpedition M1 waist pouch. I have everything ranging from my surge/bitkits/bit extension, to a notepad, pen and eyedrops. I tailored it to fit my needs, and it’s incredibly handy.

@Whigu

Жыл бұрын

I'm doing same thing. Most of these EDC Maxpedition pouches are full of brand new tools which has never used because they are made for show not for go/use. Probably that's why they always have mostly same things and lots of bits but nobody has think what bits they actually needs... It's just what comes with tools.

@peterw8835

11 ай бұрын

I also would love to hear more about how and when they use these tools. I watch these videos because well I enjoy tools. I often think, “wow that is great!” but I often say to myself, how often do you really use that?

@johnlocke_1

9 ай бұрын

....so what's in your tool kit?

I just bought a new edc backback. It's not exactly a tool kit but it has the stuff I may need in my day to day life. This video came up at a great time since I'm in the middle of deciding what to add or remove and how to organize it all. I also can connect with the pry bar being used as a driver. Earlier today I needed a flat head screwdriver and ended up using the pry bar on my KTC-2.

In my bag for the car is basic hand tools, electrical tape, fuses, about 3 ft of electrical wire, Teflon tape, hose clamps (s,m,l),zip ties, Bic lighter, utility knife ,sand paper and an Olight. Think that’s it. My EDC knife maintenance tools not really mobile, but I am getting a small bit driver for my keys like the Civivi key bit. Thanks for the great video.

for a sim/needle tool, i use to be big into blow dart guns. the blow dart needle in itself is a mighty tool that ive used for literally anything. its one of those you dont know you needed until you try. nice. long. sharp one end, blunt another.

I like to have a telescopic magnetic retrieval tool. I also have an Altoids tin to keep small parts in, and I glued a small refrigerator magnet in the bottom of it so whatever I put in there, stays in there even if bumped or knocked over. Keep up the great work.

@rulrich45

Жыл бұрын

I put a magnet on a 12' tape measure, so I have a telescopic magnetic retrieval tool that clips on my belt.

@aaronmcclain1279

Жыл бұрын

Magnetic source 3lb pocket size . . I used one all the time in a machine shop .

Solid-- some1 else had mentioned too - magnetic "snag" tool - got 1 from harbor freight w telescopic frame - soooooo handy

Highly recommend attaching a magnetic strip or something to your tool kit to place screws on. I glued some flat neodymium magnets onto my leather tool roll and it's a godsend for not losing small screws, washers, and nuts

Over the weekend I decided to make an EDC. After some experimentation I settled on a robust red fabric pencil case with two zip-up plastic fronted sections and in the middle a flat area with narrow cordoned off sections for individual pens/pencils. It was either designed as a pencil case or for make-up. Anyway I started loading stuff into it at random to see what it would take and I made a few mods using velcro and my glue gun. I fiddled, added stuff, took stuff out, fitted stuff into smaller containers. Lets see... feminine stuff because I am female. A lipstick, comb, tiny little bag of homemade toothpaste tabs, and a toothbrush (it and the comb and the pen fit nicely into the segments for pens and I protect the toothbrush by fitting a tiny ziplock bag over the head), individually packaged bacteriacidal wipes, a pen, sticky labels to write on, a beautifully FLAT plastic bottle with shampoo that will double as ordinary soap. My Pioneer SAK that I've had for 35 years. plasters, a sewing kit, pain meds of various sorts, a sheet of good aluminium foil, 5 metres of THICK string that I waxed. A small ziplock bag with a few odds and ends in it, a few short zip ties, some anti-itch cream, some Vaseline, a few cotton pads, nail clippers, 2 pairs of tweezers, a little pair of scissors, cotton buds, an old bank card with some 2 inch gaffer tape on it, a cigarette lighter (very flat) and some firelighters, a tiny mirror in a case that I got from a Christmas cracker. I just loaded and carried on loading - this thing seemed BOTTOMLESS. When I had finished it hefted nicely in my hand. It's 21cm long, 11cm wide and 7cm deep and weighes less than 400gms. And I'd fitted upwards of EIGHTY items in it! I finished off by wrapping a TINY little towel around it and holding it in place with two elastic bands. Then I dropped it in my handbag with my wallet and smiled to myself, wondering if I would ever actually USE it. Last night at 12:45 I found myself in an ambulance on my way to hospital. Clutching my handbag, a spare pair of panties - and my EDC. This morning I was able to wash my face with one of the wipes, clean my teeth with one of the toothpaste tabs, comb my hair and apply a lick of lipstick. Now I need a portable power bank - my phone near passed out on me. But BOY - am I glad I put that kit together!

I'm a tool guy being a machinist and weldor. But around the house I most commonly use one of those small tack hammers that have a flat head and Philips. A 12' Stanley slide and a cheap workpro utility knife.

Tape measure and calipers. These are more for a pouch to keep in a bag but comes in more handy then you expect.

Also if you travel, you can bring your utility knife on your keys without the blade and when you land you can just go pick up a blade.

There is a utility blade that I think is worth a mention, and that is the Milwaukee fastback series. They have compact, to one that has a bit driver. They are readily available at most hardware stores and they are affordable. I got mine for I believe 10 bucks. For my carry, I have used the fastback to phase out folding knives, and when I carry a knife it is a fixed blade such as the white river backpacker or benchmade socp. Anyway just giving a shout out to the Milwaukee fastback and sharing thoughts. Cheers folks

@Drolly95

Жыл бұрын

I agree. The picked up a Fastback 1505 not too long ago and it’s awesome.

@aaronmcclain1279

Жыл бұрын

I have EDC a fastback the 6-1 since they have came out . Used everyday with Altoids tin with Milwaukee metric Allens bits with 10-25 torx large flat heads and NO 2 Robbins for electric screws . With a Craftsman ratchet and Nitize fishing tool makes a great pry tool and scraper . And other things . It was my pocket tool kit at work when I need to take any electrical panels

@Pritam043

9 ай бұрын

Please suggest best tiny pocket knife (less than 10 cms long when opened)

I just bought a new edc case on Amazon. Love this video!!

I keep a combination eyeglasses/sunglasses repair kit, modified for most field optics. And a set of all wood tools non electrostatic conductance.

some great ideas in here. I added a few things I never considered before. I make my own hard paste wax from beeswax and oil and keep it in a small container to wipe on tool steel for rust prevention.

Thanks Taylor! Great content, as always. Can you link the "Good Screw" ? I haven't had luck finding it. Thanks!

I like have a small (bar or disk) neodymium magnet. Good for retrieving items, and by putting it under the hank you can keep small metal parts from disappearing.

I find velcro ties are more useful than zip ties. A 1/4 mini ratchet is handy to have too.

The bit driver/s I use is the Fixit Stix. It comes with two seperate drivers with attachments at each end and is compatible with all standard Bits. The two drivers means that you can use them separately like you mentioned in the video, but, they also can simply be attached together to make a T Bar for the really stubborn screws etc. I carry it every where

One of the best pry bar bit driver combo has to be the Teale Designs magnetic bit driver pry bar combo !

I have a maxpedition pouch with all my knife maintenance stuff in, but it's not something I carry around with me. Knife maintenance/modding gets done at home. I do have a Vanquest edcm maximizer pouch loaded with goodies that I keep in my car's console. The king is a Vanquest trident 21 backpack for bugging out/getting home that I'll throw in my trunk if I'm taking a long trip, staying somewhere overnight.

Wiha bits are great, but also check out Wera!

Awesome video. Thank you. Durban, South Africa

Nice meeting you at Dan Nicholas great guy

Frog lube is amazing for knife pivots with washers!

There’s tweezers specifically designed for picking up beads, they’re made for people that tie flies for fly fishing.

Those really fine tip tweezers are best for pulling ticks

Really all very nice >>>>>>> Thank you

I have started to include single shot super glue tubes. They’ve come in handy for quick repairs, bandages, and what have you needing glue.

I find my tpt slide dulls the blade pretty much instantly when installed. Do you have any pointers to prevent this from happening?

Was literally working on my kit when you posted this…always looking for more compact and useful tools.

Great video! For getting your compound super even on a strop it makes all the difference in the world to melt it in with a heatgun or a hairdryer once it's been applied.

Can you list all the pry bars your showing in this video or do you have a video that has all them in it.

great ideas

Taylor, have you ever used Super Glue as a locktite? I’d love to know your thoughts on that.

Thank you

LOL "Any lube is better than no lube". Truth brother. 😂

Threadlocker has an expiration date. If you’re keeping it for several years that’s too long. Consult the date and replace as necessary.

@dennishenderson4226

6 ай бұрын

Did not know. Thanks

Aside from organization, I keep one of those tins dedicated to holding the screws and small hardware while working on the other parts of a knife.

it needs to be said, regardless of motivation, PROVIDING LINKS TO MORE INFO [as you have done] ABOUT THE CONTENT/CONTEXT OF A VIDEO IS SUPER-DOOPER APPRECIATED! 🥰 i get that life is short and lists of loose ends growing larger each day, but there are *far too many* excellent productions that offer nothing but monetization links and vaunting, self-absorbed nonsense in their descriptions *if there's any pertinent information in them at all*. please never succumb to the dark side, and thanks for that!!! xD

What bit kit are you saying to get? Wera? Which specific one?

What are the two knives the guy is holding up in the intro right after Jeremy Siers?

babe, new edc vid!!!

For tweezers make a shrinktube cap with a small piece.

I keep the Small RIg multi tool in my EDC tool kit.

Applying Red Eyed Hog to your hunting equipment to get you excited for the BBQ when out hunting!

So many great tool recommendations and tips! 🙌🏻🙌🏻 Keep up the great work GOAT

You could sandpaper those tweezers mate.!

What’s the link for the tool roll

Being honest I'm surprised you haven't done a video on the Flipside wallet. I used it for so long and I've come back to it so many times. I would check it out. I might even send you one lol

@BestDamnEDC

Жыл бұрын

I did a hard wallet video and included some opinions on it. It’s very much not for me

I religiously care a Leatherman in my bag I haves Kolbalt persicen compact driver with a set of bits as a trk driver I’ve had to retrieve it to assist other drivers with a small tasks😎🤙🏼

The Leatherman ratchet driver is not available at a reasonable price. Many greedy pigs are out there selling at double or triple what leathermen would charge if they had it. Is there a good alternative in a similar design?

great!!

The discord is impossible to get into. The altdentifier thing isn't working and links to spam

Always a great day when Taylor uploads. Keep up the great content my guy 💪🏽

I'm surprised alot of people don't keep a mini multimeter

Whenever I sharpen I literally strop on my jeans and it works perfectly fine, I get that nice shaving edge mirror finish on a two grit whetstone and a Levi's jean strop whether it be D2 or S45N, you don't need diamond or ceramic or fancy strops or whatever, it sure is nice, but, you don't entirely need it. I believe everyone should learn to sharpen on a whetstone first and foremost before they get any other sharpening equipment.

Red Eyed Hog - B-Fat is sold out😢 i definitely need it

@Martin Taylor if the main use for your tweezers is picking up small parts try a pair of locksmith tweezers, literally designed to pick up tiny parts.

A bid lighter or mini bic.

During maintenance we also use a mini table light with a stand.

I end up using coins for my camera mounts. I will buy a pry bar now. Thanks for the video

That looks like some great stuff

I've taken to carrying a prytool where I can't take a pocket knife. Makes the pocket feel less naked

dude solid ass video! Always a good day when I see you in my feed!

@BestDamnEDC

Жыл бұрын

Thanks, Beau! 🤘🏻

I know this isn't a fashion channel, but what's the sweatshirt you're wearing? My SO would like something like that.

thoughts on carrying a set of irwin vise grips in place of a standard set of pliers? they have a wire cutter on them. Not having to apply constant grip pressure is really useful

@wastelandwarrior9738

5 ай бұрын

I do and your right it's so much better

Leatherman Ratchet and bits out of stock for so long now :((( Great video!

@shkibby1

Жыл бұрын

Sportsman's Guide appears to have a few left in stock. Not sure about the bit kits

@daveysam

Жыл бұрын

@@shkibby1 thanks! Looks like it’s back ordered to July but still better than nothing 🤷🏻‍♂️

@shkibby1

Жыл бұрын

@@daveysam aww dang... My bust. I didn't see the Backorder note. I know they used to have the bits posted, but I didn't see them today

I'm trying to build an EDC tool kit, that can be carried in a back pocket or a cargo pocket, literally, everyday, all the time, by taking the best of what I find in other kits on YT and such. I'm also leaving behind some suggestions, not criticisms, that might improve the kits I find on YT. To minimize the Chipole burrito issue, maybe just carry a few extra T bits and if you need to back one up with the other, just hold it with the pliers that's in your kit and lose the driver part. I wouldn't consider the ratchet gadget for bits "essential" for a pocket kit either. The wrist works pretty good in a pinch without a mechanical ratchet, if you want a smaller "burrito". I worked in Industrial maintenance for over forty years and, admittedly, I didn't find myself prying the scales off of many knives, but I did need to pry and lift things all the time. I found that grinding the top jaw of a pair of Channel Lock pliers down to a sharp wedge at the tip of the jaw turned it into a very serviceable pry bar that was always in my pocket and, as you pointed out, it served double duty, which is always a plus. It really didn't have any impact on it as a plier. At one time I carried a pair of Channel Locks that I ground the tips of the handles down on as well, to use for when the wedge on the jaw didn't quite work. That would be a hard modification to do to Knipix Pliers, as much as they cost, but on a budget, a small pair of some other brand of plier wouldn't be so painful. Make one handle a wedge and the other a flat head screwdriver to turn, what I think you called, a camber plate on your camera. Shaping one handle into a 1/4" square at its end will allow you to slip on a 1/4" - 6 sided socket and torque down any 1/4" bits or sockets that you have with you. I didn't realize that this was a video about a knife maintenance EDC kit. Most of my comments won't be of any use for that purpose, but I hunted and pecked my way through the darn thing, so I ain't wastin' it! Sorry, and maybe someone will find it useful. Peace.

Not being grammar police, but curious if that is how you are supposed to say Knipex. I’ve always just pronounced it Nipex with the K silent like in the word Knight. Anybody know what that company prefers?

@bryceyorkpm

Жыл бұрын

kzread.infoxlAGBk-r8qo?feature=share

@wastelandwarrior9738

5 ай бұрын

The company pronounces it with the K as in it's not silent 🤷

@DrMetalpin

5 ай бұрын

@@wastelandwarrior9738 Yeah. That’s an old comment from me. I’ve heard it come straight from the company pronouncing the K since. :)

I keep a spudger tool as my picking tool as I’m a utility company worker I also carry 2 individually wrapped “Dude Wipes”

I always carry a deck of cards

Believe you have kids. An inflation needle for balls would be a great addition to your catch all tin. Fingernail clippers, have them everywhere, wife likes a flat Emory board. Needle and thread with small scissors. Band-Aid... Fixing knives. Good stuff

@wastelandwarrior9738

5 ай бұрын

Zip ties people usually forget that are very handy😂

Зауважу, що leatherman ratchet краще використовувати з бітотримачем який має кульку-пружину. В такому разі воно тримається міцно.

Have a video of your 30 zip ties on your truck? Curious to see what all you do with it.

@BestDamnEDC

Жыл бұрын

Mostly running wiring for LEDs to the rear bumper and bed.

Great idea having a T6 in one bit driver and a T8 in another. Especially when they're stored inside the handle of the bit driver itself.

Awesome video and selection. I made my first video this week showing my EDC collection too. Feel free to take a look, I'd love to see what you all think. I chose the Knipex Cobra XS too, although I think these are pretty standard in the EDC community now. Great little pliers.

well iv gotten rust spots on m390 in a day.

arena accessories sells an OTF utility knife, if you are looking for something more fun and less practical for a utility knife

I thought you were going to start making different types of videos Taylor

First aid kit for sure. Always have anti itch for the kids 😂

@susanp.collins7834

8 ай бұрын

Never mind the kids! This Spring here in Citrusdal (Western Cape of South Africa) a new 'miggie' (midge, bug, insect) has appeared. If it bites you you scratch yourself to hell and gone and the bite becomes red/purple and nasty. We have a very good cortisone-based anti-itch ointment called Mylocort. I squeeze some of it into a tiny little Vaseline container. I mean, TINY. I bought several of them and emptied the Vaseline out, washed them out and squeezed in the Mylocort. (except for two - I chucked one of the Vaselines into my home-based First Aid Kit and the other into my EDC.

EDC? Where are you guys going every day to carry all of this stuff with you every day?

EDC tools to maintain EDC tools.

A torx fits inside an allen head

Birks for days! #bringbacknikeairjetflight

Why not a mini-sharpie? Smaller, same use.

What's the price on an "okay" bit driver? Every set I've seen in the past couple years has been stupidly expensive. It's a small screwdriver, not open heart surgical equipment. There's no reason a compact screwdriver should cost $100+ (ever).

Basically a kit to maintain your knife 😂

I hawe Victorinox Spirit MX clip and I hawe wery good pry bare but newer been in situation too use him and I hawe the house too work on . But yes good players is mus . And my Vic is best too mee . I also cary Benchmade 940 with him . And I haee him 4 ares hee is like newe,,only strop them and olways razor sharp.

The kids are alright.

If you’re a fan of utility knives, check out, Turnback Knife Co. I carry one every day, and they are excellent. 🤜🏼🤛🏼🇺🇸🔪

Can you please explain pliers to me

@BestDamnEDC

Жыл бұрын

They pinch things

@jasonleblanc-comeau7165

Жыл бұрын

​@@BestDamnEDCI was hoping for a tutorial

Sup

Best pry bar? A wonder bar that you’ll find in the paint department of any Depot or that other store. $8 🎉😂

My rule of thumb is if I don’t use a tool at least once a week it isn’t going into my edc bag.

@tomasdeleondominguez7693

11 ай бұрын

Practical rule. Efficient use of space and weight reduction is very important.

Gunny glide

when I was a child my dad always said any lube is better than no lube, he’s in prison now.

this says edc kit... if your knife needs pivot oil and loctite that often that you carry them daily, i think you need a new knife. 😂 now if this is just a general kit, sure, but a kit you always have on you? i seriously want to know how often you lube and loctite a knife. lol. no disrespect intended. sincerely curious...

@BestDamnEDC

6 ай бұрын

I work with knives for a living and have anywhere from a handful to dozens of new knives come in each month, so it's not usually the same knife with any sort of regularity. I also totally disassemble some knives when sharpening.

@MarineX

Ай бұрын

Nice little kit

Leatherman ratchet, almost literally worth its weight in gold now according to eBay. LOL

what the hell is a weeabit

@217carlson

Жыл бұрын

Wiha bits. Wiha is a brand.