As a crane operator it is good to see the shackle explained to the off-road world. The WLL is a limit of load as used for hoisting, and should a shackle be used for towing it is no longer rated for hoisting. This is due to shock loads which are imparted to the shackle which are not created in a hoisting application. There is much to know about shackles and their proper safe application. A good read is a Hoisting Handbook.

@L2SFBC

3 жыл бұрын

Oh wow didn't know that thanks!!!

@Lhenry-pf5zn

3 жыл бұрын

@@L2SFBC It also applies to ropes, snatch ropes and straps.

@chipsterb4946

2 жыл бұрын

@@Lhenry-pf5zn I was unable to find “Hoisting Handbook” specifically. Most titles that came up include “rigging”. Please let us know which specific publication you’re referring to - I like to read it!

@UnitedStatesOfTexas

Жыл бұрын

Facts! as a rigger and instructor, i can verify what this operator commented. As well as the comment about slings, etc. Keep your tools/hardware/equipment specifically separated for different purposes. Haul=Haul, Hoisting=Hoisting also would like to add NEVER cannibals your hardware. Exp. dont take a pin and switch it to another shackle. Etc..

@lewy1

Жыл бұрын

Not supposed to anyway.

Calmly and professionally presenting his knowledge, subbed for sure. Hi from a Swedish off-road noob.

I also love the wooden spacer. Wooden washers. It's funny how I make washers out of rubber, I've drilled out washers to make the ID hole bigger but never thought of using wood. I like how they keep the load pull right in the center. Good tips!

Rob, you just keep knocking them out of the park. Great Clip - thanks . Nick

Good point about putting the bow on the recovery point.

Again Robert, your explanations are great :-) Clear & simple to understand - Thank you - Ted

@L2SFBC

3 жыл бұрын

Glad it was helpful!

Just bumped into this channel. As I always say, no matter how experienced you’re, there’s always something to learn. I learned 2 things that I never thought about!

@L2SFBC

3 жыл бұрын

Which two was that? And great attitude that is how the best people operate 👍

@Agent.K.

3 жыл бұрын

@@L2SFBC Actually four things: 3- S & M rating 9- Easier tool to open a seized pin! 12- Hitch application: vertical vs horizontal. 13- How to use recovery points the right way.

@L2SFBC

3 жыл бұрын

Thanks good to know what people learn 👍

Very useful info as usual. Please do one on soft shackles please. Thank you for the education.

I wasn't sure I'd learn anything. Boy, was I WRONG! Thanks so much. I'll be getting a new recovery hitch as a result. I saved this vid for furture reference.

@RJ_Cormac

2 жыл бұрын

I love that hitch, it makes every recovery or extraction safer, you can feel your anxiety DROP from questioning if the strength of the hooks welded or bolted onto the bumper are enough. You know that class-V hitch rating and the rating for the 4/6/8, etc bolts holding onto your frame. I didn't like the frame conetection for my hitch. I was also using the rear leaf spring mount bolts for the bumper adding more loads/stress. So I added 1/4 (6mm) 4140 steel plates to the last 14in (35cm) of the frame. Cut out the Ford rivets holding gas tank crossbeams and bolted everything back together with 8x 12mm 12.9 bolts on each side. I don't fear the leaf spring falling off with the bumper towing or a recovery. Especially if I winch with the front end tethered to a massive tree, could have torn/twisted the truck to bits.

Thanks! It, Very straightforward with clear information on "why".

@L2SFBC

Жыл бұрын

Glad it was helpful! Please share :-)

Excellent video. I watched it a while ago but good to see it again.

Used these a lot when I was in Boiler maker Union in the '80s; it's just common sense. Thank the lord there are still people with common sense making KZread videos like Robert Pepper. I have to admit it took a grizzled Journeyman to slap my upside the head and yell "WTF (newbie), you're going to get yourself cut in half; here's how to hook that to the line..." I can't remember the exact pejorative used to describe us new guys but it definitely wasn't "newbie" and it would certainly be too offensive for general audience Until you fully understand what can go wrong you don't really understand how to use a tool.

G’day Rob, excellent explanations and video. We learned that 40 years ago in the port business for rigging and lashing. Cheers

I like your plywood spacers. That is an excellent idea I am going to adopt.

Excellent info..answered all my questions. There are a lot of people doing it wrong out there. Thank you

@L2SFBC

2 жыл бұрын

Thanks please share 👍

Thank you. I recently started 4-wheeling and added recovery points. I had questions about the orientation of the shackles/straps and concluded that safest would be the last example you showed.

Point 12 is where a soft shackle (with appropriate hitch) does a better job, its much less fussy as to angle :)

In the Navy we used lots of shackles. If something is important we use a steel wiren to secure the screw pin sonit can't screw out. You put the steel wire through the whole in the pin and you start weaving it around the shackle.

Another good idea for a shackle which may suffer the pin unscrewing due to repeated, continuous use, is the 'cage' the shackle. This entails using a wire, or string, (I use zip ties a lot), through the pin hole and around the bow to keep the pin from backing out during use. It is also a good anti-theft idea to keep your shackles on your vehicles.

Snatch straps break according to age , amount of use and how they are used and it can be well below the wll if the circumstances are bad . A wet , twisted , old strap hit hard 5 or six times in a row will break . A brand new strap hit hard 8 to 10 times in a row can break due to loss of stretch .

Im very impressed with you using Vernier calipers.

Really helpful information -- thank you!

@L2SFBC

3 жыл бұрын

Glad it was helpful!

Great video. Thanks for sharing your knowledge with me.

This is phenomenal info! Thanks for putting this together!

@L2SFBC

Жыл бұрын

Thanks please share 👍

And remember to make sure the recovery points on your vehicle are super strong. The only reason shackles become lethal projectiles is recovery points failing.

@KiwiPokerPlayer

Жыл бұрын

Yep, and never use a tow ball to snatch from for the same reason. A guy was killed in Oz doing that a while ago.

Great presentation. Many thanks.

Great stuff Robert, I thaught making my own bumpers would be easy, now you've thrown a curved ball, I have to allow the shackle to turn freely in the winch point and support lateral force in a bridle 🤔🤔🤔 Mate, when you're use'd to four 30,000ld winches, what you can do with a small winch becomes a science, brute force is not an option, glad I've found you and subscribed, 😷👍👍

Very good information, I would say possibly life saving. Thanks for sharing.

@L2SFBC

3 жыл бұрын

Thanks if you can now share I would appreciate it!

Today I learned that an adjustable wrench is called a shifter. I love learning alternative English.

@L2SFBC

3 жыл бұрын

Today you learned the correct term for an adjustable wrench and I learned the alternative term for a shifter 😁

@Adrian_Nel

3 жыл бұрын

There really is only one English, chap. What you call a wrench is actually a spanner. That tool which this gentleman used, is called a shifting spanner, but some people shorten that to shifter, not to be confused with that thing in a car that Americans use to select alternative gears in the car's transmission. Not that many Americans actually go to so much effort while driving. You know driving, I'm sure - its that thing that Americans do right before consuming what they call food, at those places that they call restaurants.

@L2SFBC

3 жыл бұрын

There you go sibco96, you have been educated! Now try to overcome your aversion to the letter u 👍

@davesstillhere

3 жыл бұрын

@@Adrian_Nel Y'know, most of the country that invented the things call 'em a Crescent wrench, bud.

@davemoulton8051

3 жыл бұрын

Shifter in Nova Scotia Canada it is also known as a thumb wrench

That was fantastic! I had to pause the video and run out to check my recovery hitch receiver...only one orientation. 😣 Looks like I need to do some shopping! Thanks for the great info.

@L2SFBC

3 жыл бұрын

Glad it helped

@alientrade

3 жыл бұрын

Drill out the other direction instead of buying a new one.

Coming from a construction back ground , they were called a clevis.

@Vickvineager

3 жыл бұрын

& a shifter is called an adjustable wrench.

@Lhenry-pf5zn

3 жыл бұрын

No, a clevis is quite different and varied.

Excellent info at the end, thank you

@L2SFBC

3 жыл бұрын

Glad it was helpful!

It makes good logical sense. Thanks!

Really interesting and informative. Thanks.

@L2SFBC

Жыл бұрын

Glad it was helpful! Please share :-)

Very interesting and informative video .. thanks very much.👍

Good show! Thanks for sharing!

@L2SFBC

3 жыл бұрын

Can you please share 👍

Sensational video, thank you!

@L2SFBC

Жыл бұрын

Glad you enjoyed it! Please share :-)

Enjoyed this video! Good information.

@L2SFBC

3 жыл бұрын

Thanks please share!

I'm using the miolle soft shackles, I've only had them a couple month already but have used them to pull out stuck lawn mower several time. rainy spring plus bottom ground lol. The soft shackles are great for pulling out anything that doesn't have conventional hook-up points. Should have bought these years ago.

@L2SFBC

Жыл бұрын

Great point, I also like the way they can attach to points you can't fit a metal shackle to.

Another excellent video.

Excellent video, thank you!

@L2SFBC

3 жыл бұрын

Glad it was helpful!

Great information as always.

@L2SFBC

3 жыл бұрын

Glad it was helpful!

Great Info. Thank you for the video

@L2SFBC

3 жыл бұрын

Glad it was helpful! Please share :-)

Great video!

Really good. Thanks!

@L2SFBC

Жыл бұрын

Glad you liked it!

Thanks Mate from NE TN, USA :)

@L2SFBC

3 жыл бұрын

Cheers cobber 👍

Outstanding info, thank you.

@L2SFBC

Жыл бұрын

Thanks please share 👍

Thank you for the information on Shackles New sub

@L2SFBC

3 жыл бұрын

Thanks!!!

Great Review 👍 👍🗽 Thanks The Vermonter

@L2SFBC

3 жыл бұрын

Thanks! Please share 👍

Excelente video!! very useful information

@L2SFBC

2 жыл бұрын

Glad it was helpful!

good info👍👍👍👍

Setting up for a "straight line pull" means that the centerline of the load should coincide with the centerline of the shackle. Never side load “D” shaped shackles such as *chain shackles or long reach shackles*. These shackles are designed and rated for in-line applied tension only. Screw pin shackles can be used for applications involving side-loading circumstances, HOWEVER, you MUST reduce the work load limit (ie; 6-45 degrees off center use 30% of shackles rated load and 45-90 degrees off center use 50% of shackles rated load).

@L2SFBC

3 жыл бұрын

Yep!

Excellent...

Thanks!

Good info.

@L2SFBC

3 жыл бұрын

Thanks please share 👍

Well done, thnx.

@L2SFBC

11 ай бұрын

Thanks for watching!

( D ) shackles are referred to as chain shackles by some manufacturers .

Great video and great explanations coming from a 52 year ironworker.

@L2SFBC

3 жыл бұрын

Thanks please share 👍

Good stuff!

@L2SFBC

3 жыл бұрын

Thanks please share 👍

I have most of those shackle sizes, and that special receiver hitch shackle designed to hold a shackle at the vehicle recovery point. I prefer a soft laptop bag with a reinforced ring inside to protect the laptop from agressive travel at airports iron, perfect bag for forged recovery in my rig, much better in a roll over or crash than a metal box coming off it's mount/strap and flying at something important. Toss my bag on the hood or roof without major damage to the vehicle. ⚠️🛑 EXTREMELY dangerous using these shackles to connect 2 recovery straps out in the middle trying to double the length. Bad idea, unless the goal was to ride in an ambulance to hospital; with a hole in your head, or eye bashed into your faces. 🛑☠️⚠️

Great stuff, so when connecting winch lines or bridles to the screw pin bow (anchor) shackle, do you use just some chafe guard sleeves or would you suggest thimbles to ensure proper bend radius of the rope’s eye?

@L2SFBC

6 ай бұрын

Don't need either if you kee well under load limits

great video. just a bit odd that 90% of off-road bumpers will put on recovery points that require you to put the pin through it, and not the BETTER way that you show, where the bow is toward the bumper. As it is very rare to have a perfectly lined up & straight recovery, side load is a true issue to think about. Maybe all the "trendy" bumper manufacturers should pay attention to your excellent points??? But good to see that the recovery points on my brand new F150 are in fact curved and do allow me to put the bow toward the truck and the strap on the pin. And if I am properly using a bridle to spread the load on a recovery, you will definitely be pulling at 45 degrees on each recovery point.

@L2SFBC

Жыл бұрын

Thanks! I have another video on bridles.

I have no experience in Off-roading, so I must ask: You said in the video to put the pin in fully and then back off half a turn (and I've heard it on other channels as well), but you actually just did 1/4 of a turn. Wouldn't half a turn pull it out so it isn't fully seated in the body? It looks like it is pretty flush when fully in and with the "largish" thread pitch one-half turn would pull it out too far, or am I wrong (something my wife often says is true😁)?

@L2SFBC

4 ай бұрын

It depends on the shackle. Some 'like' 1/4 turn, others 1/2 turn. You can also do no turns. There is a bit of a debate about it..fact is, they are so strong 1/2 turn won't make any difference to what breaks first and it won't be the shackle!

Always use Crosby products

@michaelalexander3828

3 жыл бұрын

Skookum shackles are great also, but not cheap !

A side note, here in the US, markings are significantly different. Same purposes, just different.

@L2SFBC

3 жыл бұрын

How so?

@knotbumper

3 жыл бұрын

@@L2SFBC Our rigging only mark grade 6 or better. I think yours might be better because most 4xr4 people are amateurs when it comes to rigging. I lived it every day for 46 years. (Logging.) I started out working with 2" skylines where the skyline shackle weighed 65 pounds and the pin 20. I do appreciate you comment about backing the pin out when using a shackle, I have had to take a torch to shackles where the pin wasn't backed out a bit.

@psidvicious

3 жыл бұрын

@@knotbumper I could be wrong, but I don’t remember the coloring of the pins as an indicator that the shackle is ‘rated’ (in the US anyway). I know I’ve seen and used both, but never associated it as being rated or non-rated. [construction background]

@psidvicious

3 жыл бұрын

Just looked at the Crosby catalog and same are painted and some aren’t.

Unless its a soft shackle multipler use a bow shackle

you said you were NOT going to talk about rope.

You didn't mention the ones we use in underground coal mines that weigh 300 lbs and we've bent them pulling out covered up continus miners with

@L2SFBC

3 жыл бұрын

I was going to but hard to fit on my table

@cooperb8068

3 жыл бұрын

@@L2SFBC we had a crew that recovered miners after they were covered up by production crews pulling pillars, , we had what's called a crab that had a 50 ton hydraulic cylinder that wedged a 6 way shieve with 2 inch cable into the top underground, we always got the miners out but not always in 1 piece

@L2SFBC

3 жыл бұрын

Wow...I love to hear stories like this so we can all learn!

@cooperb8068

3 жыл бұрын

@@L2SFBC I could try to explain a long wall move underground but unless you've been there and pulled shields that keep you alive it's nuts

Can metal shackles be used for other purposes not car related? My mind is exploding with thoughts

@L2SFBC

3 жыл бұрын

Yes they can be put to multiple purposes. For example, if something is moving but shouldn't be, then that object can be retrained using a shackle.

What is the hole in the pin for.

@jake-mv5oi

Жыл бұрын

Screwdriver to loosen, usually

They're called Clevis, and they are made in sizes up to 150 ton. Obviously, much larger than what is shown here. Same concept, just, much larger.

🏆🏆🏆✌️🙏

On heavey loads mouse off the bin with wire.

@L2SFBC

3 жыл бұрын

Good tip!

Says, half a turn, but backs the pin off a quarter turn. Which is it?

@L2SFBC

3 жыл бұрын

Depends on the load and circumstances. Maybe run with a third.

@kylevanwinkle2081

3 жыл бұрын

You typically only back off a 1/4turn max. Crane and rigging industry standard is no back of but to rather tighten till touch but not tight.

Use USA made

@munsters2

3 жыл бұрын

NO CHINESE CRAP!

You do have some info wrong. Not all shackles have a safety rating of 6. Most at least in the US crane and rigging industry are 4:1 or 5:1 Not all are rated for a side load pull. And a 45° pull doesn't derate the shackles itself but it does increase the sling tension by 1.5:1, 60° is 1.15:1 sling tension factor. And 30° is a 2:1 sling tension factor. 30° and below is generally a no go because not only does the sling have twice the load on it then a straight 90° pull would but because it is very easy to rip off or at the very least bend attachment points. In a vehicle that could be your hitch or your axle mounts. Pin to pin is always frowned upon, not because of ratings but because the shackles can shift within the connection point. Typically this doesn't matter but a d ring or master link is a better method. Centering the sling on the pin is a good practice but except in critical lifts which are high risk or high weight lifts we typically don't worry about that. Keeping the proper spacers around and available would be nearly impossible since the sizes vary so much and 2 because they get lost quite a bit. In my opinion having an in depth knowledge of snatch block usage and the proper equipment available is more valuable than nit-picking the shackles uses.

@L2SFBC

3 жыл бұрын

Thanks for the clarifications, Kyle. I was working off Australian standards...good point about 4 or 5 to 1. Going to do a video on bridles and forces which will cover some of the above. Thanks again!

@kylevanwinkle2081

3 жыл бұрын

@@L2SFBC bridles are interesting because if you self assemble them you only use 2 legs for the load capacity calculation on a 4 leg system, unless you have a way to equalize the leg lengths, where on a 3 leg you use all 3. Unless it is on a lifting device in which the system,bridle and device, are only tested to 125% at least by US standards.

@L2SFBC

3 жыл бұрын

Simpler for 4x4s...just need two legs and focus on the included angle!

@kylevanwinkle2081

3 жыл бұрын

@@L2SFBC yea much simpler, I've worked with bridles with 16 legs. Each leg had an load moment indicator so we could adjust each leg by turn buckle to make them equal tension. Total load was right about 500ton. Just left corpus cristi TX where we pulled a head with an 8 leg bridle that was 256ton. That one was much easier just measure the turn buckles out to engineered lengths.

@L2SFBC

3 жыл бұрын

So much to learn from the hoisting industry!!!

don't use the softshackel with both of that type snatchblock.

@L2SFBC

3 жыл бұрын

which ones and why not?

@DavidVoxDem

3 жыл бұрын

@@L2SFBC 'Cause it's the weakest part of the link and that snatch block is gonna come flying at your head

@Ilindariel

3 жыл бұрын

@@L2SFBC because both have a sharp outer edge where the soft shackle rests, the edge should be rounded 1.5 x the diameter of the rope for shackle . www.samsonrope.com/resources/how-to-splice-rope

Couldn't be anymore redundant could he?

De,der and dis, what an amazing journalist, was he talking about a d-shackle or the shackle? Hope he writes better than he pronounces his words,i think his mouth is bwoken.

@L2SFBC

3 жыл бұрын

Would be unfair for me to be good looking as well as perfectly spoken wouldn't it 😁

@jackd2083

3 жыл бұрын

@@L2SFBC Lol! Great reply!😂

@Pittsburghpilot

3 жыл бұрын

That response is magical!

@sirxenon6855

3 жыл бұрын

@@L2SFBC Lol hahaha Yuk-erk McKirk said exactly what I was thinking but you are instantly forgiven for that brilliant comeback!

@yuk-erkmckirk9277

3 жыл бұрын

@@L2SFBC oh lord it's hard to be humble ,when you're perfect in eberwe way . An dats a fact. D,d,d,d, dats all folks.

That is a Mexican speed wrench not a shifter.

Excellent and full of relevant content. keep them coming.

@L2SFBC

2 жыл бұрын

Thanks, will do! Please share :-)