Thank you sm , everything so clear and on the point

@romeroc24

10 ай бұрын

Thank you for all your kind support

thank you Christian for your explain you are the best !!!!

@romeroc24

Жыл бұрын

Thank you for all your support, I need this

The way you explain this is really helpfull. Thx 😁😁😁

@romeroc24

2 жыл бұрын

Glad it was helpful! I appreciate it

🌹Thanks I Will share your videos

@romeroc24

4 жыл бұрын

Thank you I appreciate

Thank you again Christian

@romeroc24

3 жыл бұрын

I appreciate

gracias profesor muy util

@romeroc24

Жыл бұрын

Aprecio mucho tu apoyo

Perfect!

@romeroc24

4 жыл бұрын

I appreciate

great, the application gave me an error on the 4th part of the 3rd step and nothing was saved))

@Saudade67

Жыл бұрын

the application has made an error twice, so I advise readers of this comment to save progress at each new stage))

@romeroc24

Жыл бұрын

try to use packet tracer 8.1 maybe 8.2 will have problems

Archivo pkt?

@romeroc24

2 жыл бұрын

Hay que seguir los pasos del video para crear los archivos.

en español ?

@romeroc24

4 жыл бұрын

por ahora trata de poner los subtítulos en traducción a español, trataré de hacer el video en español lo antes que pueda

Hi dead really I'm very interested when I saw your video, kindly I need your help can you assist me to configure topology send me your email if possible

@romeroc24

4 жыл бұрын

not problem, please contact me on social networks show on 00:03

@asso.prof.dr.ghossoonalsad2699

4 жыл бұрын

@@romeroc24 hi dear I have to send you the information: CNNA2 - final Assignment In this assessment, you will use the skills and knowledge that you have learned in the labs in this course to configure the router and switches in the topology to configure the following. • Configuration of initial settings on a router. • Configuration of initial settings on a switch, including SVI and SSH • Configuration of VLANs. • Configuration of switchport VLAN membership. • EtherChannel configuration. • Configure STP. • Configuration of static trunking and disable DTP. • Configuration of routing between VLANs on a Layer 3 switch • Configure DHCP addressing and default gateways on hosts. • Floating static and default routes in IPV4. • Stateless DHCPv6 • IPv4 DHCP pools. • Switch security including port security. • Enhanced LAN security with PortFast, and BPDU guard. • Wireless connectivity using Wireless router. Addressing Table Device Interface IP Address R2( inside Cluster) S0/0/0 200.100.10.2/24 2001:db8:acad:2::2/64 fe80::2 Gig0/1 200.100.1.1/24 2001:db8:acad:3::1/64 fe80::2 R1 S0/0/0 200.100.10.1/24 2001:db8:acad:2::1/64 fe80::1 Gig0/0 2001:db8:acad:4::1/64 fe80::1 G0/1 172.16.1.1/24 S3 VLAN 10 192.168.10.1/24 VLAN 20 192.168.20.1/24 VLAN 30 192.168.30.1/24 VLAN 99 192.168.99.1/24 G0/1 172.16.1.2/24 S1 VLAN99 192.168.99.2/24 S2 VLAN99 192.168.99.3/24 WR Internet DHCP PC1 FastEthernet0 IPv4 DHCP PC2 FastEthernet0 IPv4 DHCP PC3 FastEthernet0 IPv6 Autoconfiguration Laptop Wireless0 IPv4 DHCP netacad.com FastEthernet0 200.100.1.2/24 2001:db8:acad:3::2/64 • • VLAN Table VLAN Name IP Network Subnet Mask Device(s) 10 Student 192.168.10.0 255.255.255.0 S1,S2,S3 20 Staff 192.168.20.0 255.255.255.0 S1,S2,S3 30 Guest 192.168.30.0 255.255.255.0 S1,S2,S3 99 Mgmt_Native 192.168.99.0 255.255.255.0 S1,S2,S3 888 Unused - - S1,S2,S3 • • Port VLAN Assignment Table Device VLAN VLAN Name Port Assignments S1 10 Student Fa0/6 S2 20 Staff Fa0/11 S1 99 (Trunk Port) Mgmt_Native Fa0/19-20,23-24 S2 99 (Trunk Port) Mgmt_Native Fa0/21-24 S3 99 (Trunk Port) Mgmt_Native Fa0/19-22 30 Guest Fa0/1 • • EtherChannel Port Assignments Table Channel Group Devices in Group Ports in Group 1 S1, S2 Fa0/23-24 2 S2, S3 Fa0/21-22 3 S3, S1 Fa0/19-20 • • Note: Switch S1 and netacad.com server is already preconfigured and locked. You cannot do any configuration changes on those devices. Part 1: Basic Router Configuration Step 1: Configure router R1 with required settings. - The device hostname according to the value in the addressing table. - Remote access to the VTY lines with a password as module2 - All clear text passwords should be encrypted. - IPv4 and IPv6 addressing on g0/0, g0/1 and s0/0/0 • Part 2: Basic Switch Configuration • Step 1: Configure Remote Management Addressing on S2 • - The device hostname according to the value in the addressing table. Hostname S2 • - Configure SVI 99 on switches S2 with IPv4 addressing according to the Addressing Table. • - Configure default gateway on the switch S2 • Step 2: Configure Secure Remote Access on S3 • a. Configure SSH on S3 as follows: • - Username: admin password: M0du1e123! • - Modulus bits 1024 • - All VTY lines should accept SSH connections only • - Connections should require the previously configured username and password. • - IP domain name: netacad.pt • • Part 3: VLAN and Switch Security Configuration • You will configure VLAN and switch port security on S2 • Step 1: Configure VLANs according to the VLAN table. • Use the VLAN Table to create and name the VLANs • Step 2: Assign switch ports to VLANs on S2 and S3 • Assign VLAN membership to static access switchports according to the Port in VLAN Assignment table on S2 and S3. • Step 3: Configure port security on active switch access ports • a. Activate port security on the ports. • - Configure the ports to accept a maximum of 2 MAC addresses. • - If a violation occurs, configure the port to drop frames from the unauthorized MAC address, log it, and send an alert. • - MAC addresses should be present in the MAC address table for a maximum of 10 minutes before they are removed. • - On S2, configure the MAC address of PC2 as a static address on port FastEthernet0/11. • - Ports should add the learned MAC addresses to the running configuration. • b. Configure STP in Rapid PVST mode. Mitigate STP attacks by configuring BPDUguard and PortFast on the active ports of S2. • Step 4: Secure unused switch ports on S2 • - Move all unused switch ports to VLAN 888. • - Configure all unused switch ports as static access ports. • - Deactivate all unused switch ports. • • Part 4: EtherChannel and Trunking Configuration • Step 1: Configure EtherChannels • Create EtherChannels on S2 according to the EtherChannel Port Assignments Table. Use the Cisco PAGP protocol. Both sides of the channel should be set to ‘desirable’ mode. • Step 2: Configure Trunking on the EtherChannels • - Configure the port channel interfaces as static trunks with native VLAN • - Disable DTP negotiation on all trunks • • Part 5: Configure Inter-VLAN Routing • Step 1: Configure inter-VLAN routing on the Layer 3 switch • - Configure Inter-VLAN routing on the S3 Layer 3 switch for all active VLANs in the VLAN Table that are configured on S3. • - Configure the switchport on S3 that is connected to R1 with an IP address as shown in the Addressing Table • • Part 6: Configure Addressing and DHCP • You will configure DHCP on S3. • Step 1: Configure a IPv4 DHCP pool on S3 for VLAN 10, 20, 30, networks. • a. Exclude the Switch S3 interface addresses. • b. Configure a IPv4 DHCP pool that will be used by hosts that are connecting to the VLANs. • - Name the pool and configure the pool to use the addresses as in the below table Pool Name Network Address VLAN10 192.168.10.0/24 VLAN20 192.168.20.0/24 VLAN30 192.168.30.0/24 • - The pool should also provide the default gateway address. • Step 2: Configure an interface as an IPv4 DHCP client. • Configure the PC1 and PC2 to receive its address over DHCP. • Step 3. Configure R1 router as Stateless DHCP server • - Enable IPv6 routing • - Create an IPv6 DHCP pool on R1 named R1-STATELESS. As a part of that pool, assign the DNS server address as 1::1 and the domain name as module2.com. • - Bind the DHCPv6 pool to Interface G0/0 of R1 to provide the OTHER config flag to the R1 G0/0 network only. Refer to the addressing table for the addresses. • - Enable ipv6 autoconfiguration on PC3 to receive the IPv6 prefix. • • Part 7: Configure Static Routes • In this part of the assessment you will configure static, default, floating static in both IPv4. • Step 1: Configure static default routes on R1. • - Configure Next-hop IPv4 default static routes to reach netacad.com network. • Step 2: Configure static routes on R2 (inside cluster) • - Configure directly connected IPv4 static routes to reach all VLAN’s and G0/1 network of S3. • [Add ipv6 ospf 1 area 0 to G0/0, S0/0/0 of R1] • • Part 8: Configure the Wireless Settings • In this activity, you will only configure the wireless settings for 2.4 GHz • Step 1: Configure the WR SSID and Wireless Security. • - Change Network Name (SSID) to Guest for only 2.4 GHz • - Set WPA2 Personal for the Security Mode. • - For the Encryption field, keep the default AES setting. • - In the Passphrase field, enter Cisco123 as the passphrase • Step 2: Connect the Wireless Clients. • Connect the Laptop to the Wireless Network Guest • • Part 9: Verify Connectivity • - Verify connectivity between the PCs, Laptop and netacad.com server. • - Verify that a host can connect to the SVI of switch S3 over SSH.

@asso.prof.dr.ghossoonalsad2699

4 жыл бұрын

@@romeroc24 what about topology how to send it to you

@romeroc24

4 жыл бұрын

@@asso.prof.dr.ghossoonalsad2699 send me file using social networks show on 00:03

@asso.prof.dr.ghossoonalsad2699

4 жыл бұрын

@@romeroc24 I sent a file here I have a packet tracer, tell me if you have anything else. drive.google.com/file/d/1qDmZ3u_0k23IO3D3p8mU9OedS7lmIT7C/view?usp=sharing

Hi 👋 friend please put Arabic translation 💖

@romeroc24

2 жыл бұрын

I will try, thank you for all your support

@user-hx2it9go3r

2 жыл бұрын

@@romeroc24 Thanks in advance ☺