Tim, I hope all is well. Great work on the 12 volt set up. I agree with you that the 12 volt has its place. Wash on brother!!
@ExpertPowerWash
5 ай бұрын
Thank you! Hope you are off to a great season!
@ktpowerwashingАй бұрын
That set up sure looks familiar. Keep up the good work. Enjoy your vids.
@ExpertPowerWash
Ай бұрын
Thanks, will do!
@carpetmagicofwilson5 ай бұрын
Great video, I run a 12 volt setup, it has 7gpm 100 psi pump, i'm noticing when i pull the trigger i get my full distance then within 5 seconds or so my distance drops about 6 or 10 feet, it has 1/2" hose on the reel. coming out of my metering system is a 3/4" hose feeding the pump, i have 1/2" water line and 1/2" bleach line going into the metering valves. Any ideas Thanks
@ExpertPowerWash
5 ай бұрын
Sounds like air in the line for sure. Go through every single piece of your plumbing.
@salscavo31102 ай бұрын
Great video. When will you have more available? It shows out of stock on your website.
@ExpertPowerWash
2 ай бұрын
Waiting for a delivery.
@RickHamilton-nk5pi3 ай бұрын
Tim, when you guys set these up on your rigs what size plumbing do you use coming into and out of the pumps? Great video!
@ExpertPowerWash
3 ай бұрын
3/4 from the mixer to the pump. 1/2 out. You have to remember the pump is 1/2 and so is the hose reel. I’ve tested other options and we land back at this for the best all around performance.
@RickHamilton-nk5pi
3 ай бұрын
@@ExpertPowerWash Thank you, Tim.
@ktpowerwashing
3 ай бұрын
@@ExpertPowerWashspraying with 1/2" hose or 5/8" hose? Your comment leads me to think 1/2", keeping everything consistent with pump outlet size, hose reel in/out.
@jerrymeyers20755 ай бұрын
Do you sell this setup on it's own?
@ExpertPowerWash
5 ай бұрын
Yes I do. Here’s the like, pressurewashingskids.com/products/mounted-remco-5-3-gpm-60-psi-softwash-pump?_pos=3&_psq=Pump&_ss=e&_v=1.0
@jerrymeyers2075
5 ай бұрын
@@ExpertPowerWash thanks for the quick response I'll be ordering one next week
Пікірлер: 15
Tim, I hope all is well. Great work on the 12 volt set up. I agree with you that the 12 volt has its place. Wash on brother!!
@ExpertPowerWash
5 ай бұрын
Thank you! Hope you are off to a great season!
That set up sure looks familiar. Keep up the good work. Enjoy your vids.
@ExpertPowerWash
Ай бұрын
Thanks, will do!
Great video, I run a 12 volt setup, it has 7gpm 100 psi pump, i'm noticing when i pull the trigger i get my full distance then within 5 seconds or so my distance drops about 6 or 10 feet, it has 1/2" hose on the reel. coming out of my metering system is a 3/4" hose feeding the pump, i have 1/2" water line and 1/2" bleach line going into the metering valves. Any ideas Thanks
@ExpertPowerWash
5 ай бұрын
Sounds like air in the line for sure. Go through every single piece of your plumbing.
Great video. When will you have more available? It shows out of stock on your website.
@ExpertPowerWash
2 ай бұрын
Waiting for a delivery.
Tim, when you guys set these up on your rigs what size plumbing do you use coming into and out of the pumps? Great video!
@ExpertPowerWash
3 ай бұрын
3/4 from the mixer to the pump. 1/2 out. You have to remember the pump is 1/2 and so is the hose reel. I’ve tested other options and we land back at this for the best all around performance.
@RickHamilton-nk5pi
3 ай бұрын
@@ExpertPowerWash Thank you, Tim.
@ktpowerwashing
3 ай бұрын
@@ExpertPowerWashspraying with 1/2" hose or 5/8" hose? Your comment leads me to think 1/2", keeping everything consistent with pump outlet size, hose reel in/out.
Do you sell this setup on it's own?
@ExpertPowerWash
5 ай бұрын
Yes I do. Here’s the like, pressurewashingskids.com/products/mounted-remco-5-3-gpm-60-psi-softwash-pump?_pos=3&_psq=Pump&_ss=e&_v=1.0
@jerrymeyers2075
5 ай бұрын
@@ExpertPowerWash thanks for the quick response I'll be ordering one next week