look at me, im a woodworker! I can press a button and let my $20k machine do all the work for me, im so good

@JonnyBuilds

5 ай бұрын

As a gamer I assumed you could relate to someone else pushing buttons, but seeing how you’ve never hit the upload button on the KZread channel you created in 2006 it makes more sense.

@elrobbo6

5 ай бұрын

@@JonnyBuilds Ah , yes, because having a youtube account means you need to upload videos... If that's how your logic works, probably better that you are pressing buttons now instead of patrolling the streets.

@JonnyBuilds

5 ай бұрын

Your channel tagline states you’ll be sharing your gamer content, but hey, it’s way easier to give up on that dream than to put in the work.

@TheTrendykendy

5 ай бұрын

@@JonnyBuilds Bah gawd almighty, That man HAS A FAMILY!

@TheTrendykendy

5 ай бұрын

@@elrobbo6 Let's see your large walnut table that you make and we can judge whose is better

The end result is awesome! One tip I think you'd like: The bolts are the only thing that stand out on the base. A way I've made new hardware look rustic is to torch off the bright silver zinc coating (you can melt wax on afterwards so they don't rust) It will leave you with a nice dark steel look. Also you can take it one step further and get the nuts and bolts red hot and hammer them a bunch to give them a vintage hand forged look! Great work! Good luck!

@antman7673

5 ай бұрын

that maybes it harder to move the table.

@Tom-hz9oc

14 күн бұрын

Be careful torching off the zinc. It’s quite toxic when inhaled.

Triangles. Always build the base with triangles in mind. Instead of that bottom bar you might have put in angle beams from the top of the legs to the center of the main decorative cross bars. Would provide a ton of rigidity

@Momoka7

7 ай бұрын

The good old triangles. They are used from building houses to other bigger structures like bridges... for a reason.

@Stellarffxi

7 ай бұрын

angle beams is what I would have done too...

@leem8637

4 ай бұрын

Finding myself shouting "Triangles! You need Triangles!" at the screen... Glad im not the only one lol

@treborsf

Ай бұрын

Triangles are, in fact, the appetizer of stability. 🙂

@ChelseaOsborne-my1wo

4 күн бұрын

​@@treborsfthey are also the shape of tortilla chips, which is also a delicious and stable choice for an appetizer. Good call!

I have to admit that I was most impressed when you routed your own bowties, not just asking the C&C to do it. Gorgeous table. So many layers of thoughtful design.

The build was awesome and loved seeing the problem solving but man it felt like you were trying to sell me something every 30 seconds.

@daneekaplan4284

7 ай бұрын

I complained about the same thing- I was a lot

@-PORK-CHOP-

7 ай бұрын

Exactly, to many I'm using this, or I'm using that because I was given it for free and money to say so.

That project came out awesome, even with all obstacles you've had to endure. Kudos to you, John!!

Using a power bank like that for an angle grinder is rather hilarious. Cordless grinders are way cheaper and better than throwing sparks at an expensive power bank

@peteoconnell3750

7 ай бұрын

But then your cordless is limited to the grinder only. With the powerbank which whilst is extremely expensive does mean every corded tool becomes "cordless". I personally would not buy one as my home electricity is extremely reliable.

@TheParkAttendant

7 ай бұрын

No disrespect my friend. But I prefer my cords. I've had too many times when ALL the batteries are dead. With my cords, I can just keep going, with out the need to constantly changing out battery packs.

@5280Woodworking

7 ай бұрын

Yea, I agree. It was a sponsorship so I let it slide.

@gerbil7771

7 ай бұрын

@@TheParkAttendant Totally agree but that doesn’t mean you’re going to spend 1000$ on a battery bank that you still need to remember to charge up.

@TheParkAttendant

7 ай бұрын

@@gerbil7771 yep, your right.

I dunno if I have just never noticed before but I swear every other line is an infomercial for a different product 🤣

@personalwatching9312

7 ай бұрын

Yep. Hated it

@valsptsd814

2 ай бұрын

Tax deductions.

This turned out great! I love all the details in the base; and I'm not normally a fan of resin logo designs in furniture like this, but you executed perfectly and it looks amazing!

The flex problem on the sides even with the 1/4" plate is a perfect demonstration of why I-beams are used in construction. You could in theory just keep making the plate thicker and thicker until it works, or you could add a small spine to it. It's the same reason why a sheet of paper is floppy, but if you curve it, it can support a surprising amount of weight.

@lukeschmidt

15 күн бұрын

The ancient Greeks really knew how to arch stuff up. These relatively new wooden i-beams are incredibly light, strong and inexpensive.

Elrobbo6 disappeared like Where’s Waldo! Beautiful table, and I love that you went through the trouble with fixing the wobble. Most artists would run from that instead of embracing it like you did. Beautiful piece!

@justinwhite4274

14 күн бұрын

A fuckin artist? Lol.

I'm in OKC and haven't heard of this lumber yard you speak of. I used to be a TIG Welder, so I REALLY love your big boy toys and watching all the cutting machines especially the plasma CNC! Some of my best times in the Sheet Metal Dept where I worked was watching the machines in process as well as the actual welding I was doing. You built a GREAT table. I love seeing your process.

Beautiful table and, honestly, I like base #2 more than base #1. It’s less busy and more pleasing to the eye. I don’t expect I’ll be building anything so tech-reliant, but I’m awed that others know how and have the creative intuition to design and produce such awesome work results. Great job, @Jonny Builds.

This is not a video about building a table. This is a video about all the sponsors this guy has.

Despite figuring out your problem with the base before seeing you come up with the same solution in the end. I still enjoyed the build and looks of the finished table. It's important to show people that no matter how good you think your design is or may be, that you can run into problems that require you rethink it. Hopefully, not to the same costs you endured on this project though! Having said all that, next time I am a few hours up the road in Stillwater, I'll be sure to try to stop by and have a beer on your table. Simply because I like how it came out in the end, well and to just have a good beer too!

@dinkvjr

5 ай бұрын

That'll be cool

LOVE that metal work on this combined with the beautiful epoxy in wood. Not many makers using the mix mediums and that's why you are one of my favorite . You are a fantastic artist including woodworker. Love your designs which is one of the hardest parts of projects. Now that you are partnered with Lincoln Electric I look forward to more metal work in your projects.... Yay!!! You are

Excellent result and a truly functional piece of furniture. Well designed and executed John.

Great job. Looks incredible.

Beautiful, Jonny! Really fantastic work! 😃 The table looks mad!!! Well done! Stay safe there with your family! 🖖😊

Table turned out amazing great job. The colors look great with the Walnut the top stands out beautifully

I love the design. You pulled it off like a champ.

I have a couple of 2'x5'x3" pieces of walnut from a walnut tree that was behind my grandparents house. It has been out in the garage for years now. As an OKC resident, Jonny is one of the few I'd trust... just as soon as I figure out what to do with it! You do some awesome stuff.

@kingjudah7775

15 күн бұрын

Still got them? Wanna sell a couple? 👀

AMAZING. Really love it. Great job.🎉

Awesome build, Jonny, really love the walnut / metal combo! Those plasma cut legs look really dang good!

you give me so much inspiration!! i know if someone like you can do this, literally anyone could do it. thank you

@lisawallace3124

3 ай бұрын

"if someone like you can do this, anyone can" 😆😆😆😆

You could've kept the original 1/8" steel but added extra corner supports and it would've been rock solid. But you figured it out... The table looks great!

Full welds across the arches would have helped. Attaching the stretchers to the legs with bolts will be the next failure point resulting in wobble again. But maybe a sponsor will have a gadget you can use in an out of place way to fix it. Like, a portable power bank, inside the shop, with outlets on the wall.

@-PORK-CHOP-

7 ай бұрын

Yeah, maybe some $10,000 gadget that weighs 200kg that does only one thing but was supplied by a partner so might as well flog how good it is that it can do only one thing when he probably has a $5 tool in a draw that does the same thing 🤣🤣😂😂

@f.kieranfinney457

5 ай бұрын

Made my day.

I think both versions look amazing...Great work.

As someone who lives in Stillwater, I’m going to enjoy many beers at that table 🍻

@JonnyBuilds

7 ай бұрын

🙌🙌

Those neon like colors in the epoxy just kill me! So gorgeous and if I ever go to Oklahoma City again I’ll try and stop by to see it in person because I’m sure it’s even more stunning in person! They’re crazy to not have you build more!!!

I had a 2013 and a 2023 Honda Ridgeline for a work truck, and they were hard to beat! Great fuel mileage, and reliable. Now I have a “Traditional” truck and want either of the ridgelines back.

Looks amazing - if only all bars/restaurants went to this level....Great Work!😊

Love it, I think the base would’ve looked better in black, but overall, fantastic piece

@melody5437

4 ай бұрын

I swear I watched him spray it black.

Beautiful table and workmanship. Only thing I might have done a little differently is the zinc bolts. Blacksmith rivets would have been my choice. Thanks.

@JonnyBuilds

6 ай бұрын

Great idea!

That table came out awesome experience great job well worth the effort

GREAT TABLE!!! LOVE ALL THE COLOR!!! LOOKS GREAT!!!

aldo is on the home depot bucket at 18:30

Base #2 is definitely an improvement. First base was way to busy. Beautiful table, and your vid is great advertisement for the brewery

The table is absolutely stunning. I love walnut in that table just

Well done on the project and thanks for putting it in one of my favorite breweries! I'm surprised they are taking it to Stillwater.

I feel like they kinda ripped you off but as long as you enjoyed yourself and feel good about it that’s all that matters 👏🏽you did a great job

How many tools can I promote in my videos 😂

This table is so cool!! Fantastic work!

It is extremely well done! Good job!

The vintage colors with the walnut look great! That’s got to be a cool table to sit or stand around. 18:29 where’s Aldo? On the bucket.

@MrsGump

7 ай бұрын

Holy shit, how did you spot that? Great catch!!

@UncommonCreator42

7 ай бұрын

Keen eye I guess 😊and I paused it right at that moment too! @@MrsGump

@cyh4031

5 ай бұрын

What bucket?

"where's aldo" is at 18:30 on the home depot bucket

I respect your work and admire your dedication to your profession

Absolutely beautiful thanks for sharing your artwork

Love how you own your mistakes. Beautiful job. KUDOS!

wow, so much inspiration in one video. Looks amazing.

this table is so badass. you do excellent work.

Hey Johnny, excellent build one of your best !!! The Second version looks great!!!

That is so awesome. I'm so envious.

I have had my Ridgeline since 2017 or so. It has had a *huge* amount of plywood in the back from just before the prices went nuts. I've also had long board in there (both through the sliding back window and with a trailer-hitch board support mount. It can hold quite a bit, and still has a nice non-truck ride. We take it to the dump, or to pick up mulch, stones, more. Unlike my old SUV, I don't mind beating up the truck bed a bit. I can park it in the lower floor of the airport garage, which was important for me, because that's the one with all the spaces, but it has a low ceiling. No other trucks fit in there :) Oh, and when we take it to the beach every year, I load the trunk up with most of our stuff so it's not all just out in the open bed when we stop for bio or drinks.

The first bass was vary Busy. So agree with your decision on changing it ,love the simple simplicity of the second one . Did a awesome job on it lots of work went in to that. Like the small details on the bow ties. It totally makes sense to give that straight so it will last years. I’m a quilter and I tend to get some of my quilts A bit busy, because of prints it’s always a rule to use a background color to soften it or bring the colors out. It’s not woodworking But it’s still hand made ❤

Wow, wow, what a job truly amazing hard graft with impressive results. Talent right there !!!

I love walnut so much! Beautiful!!! I have a mini storage in Ponca full of it from a walnut tree that got hit by lightning. The right project will happen some day lol.

Gorgeous table. That white lettering pops in the dark wood and filtered window light. I am just a DIYer but I can so relate to having something that feels so predictable need several modifications. I put an entire roof on with shingles hanging an inch off the edge only to follow up with one inch fascia boards! HA! Lol! I had to scrape paint for weeks that peeled from when the water dripped onto the fascia and then the plywood soaked it up! Still, I saved many thousands of dollars doing it myself and many years later I can say getting my pride smacked wasn't so bad for my youthful character.

honestly looks amazing!

The table is awesome. Be sure to save the other base to use parts of it for another project. I really like it.

Box cross sections give you the best rigidity for the weight of the material that you use. Box tube is much better than angle stock. That is why you saw such an improvement when you added the channel pieces to the ends. Next time, design box sections in from the start. If you do it right, you should be able to use 1/8" steel throughout. If you want to lower the weight even more, you can make triangular cutouts in the sides of the box sections. Find a mechanical engineer to help you if you want to optimize strength to weight.

Looks amazing!

That’s a bad ass table!! Great job!!

Nice work Jonny!

Table looks great!

Brilliant.Well Done.

Thanks for helping @BlacktailStudio! Looking forward to seeing what you have to offer! Cheers!

@JonnyBuilds

5 ай бұрын

🙏🙏

Like second version so much better, looks fantastic. Nice job!

Gorgeous! 😻 The "industrial" metal base fits really well with the repurposed building, too, shame it's going to a different location. (Where's Aldo?)

I love it I think it is beautiful. Anybody would be proud to have that table.

Soon as I saw the metal you were using I could've told ya it wouldn't be sturdy enough. Then again, I was a welder/fabricator for the army so maybe I have an eye for things others don't. But its a far cry from what I'd call "almost ruined". End result looks good, the logo gives me old-skool 70s vibes

So cool, wish I had your shop !! Way to put your name to your work and do it right.

I'm going to be looking at that same truck this weekend.❤

What a table. Looks great.

love the table, looks awesome.

Beautiful work! ❤

Amazing work dude. It's awesome!

Awesome job on the table.

Awesome Johnny, awesome! Thank you for your skills!

the original legs were so good! all you needed was a few tringles in each corner of the leg and you'd have been set. Hope to see a new table with those awesome designs in it!

Wood, epoxy, C channels, bowties with acrylic templates! It's almost as if Cam from @BlacktailStudio designed this table 🤔

WOW…final version looks awesome. I like the second version. It looks heavier which will look fantastic in the brewery.

Very cool table! Im a huge fan of mixing steel with wood. In my opinion or personal preference i think black bolts would have been better, possibly square headed, then give the steel a rusted reclaimed finish to give it a more rustic look. Btw.....I would love to try a few craft beer sitting at that table!

Im sure he built his business from basic tools, from which he made some lovley wood work and for him its working because he has put the work in, people like his stuff and its been built from the ground up❤

The end, that was Beautiful love the colors.

WHERE'S ALDO Loved watching this. Awesome job. I love the effort that got put into the base to make it as impressive as the top. Too many builders/makers/professionals don't put the same effort in both aspects so it's great to see more of this.

@tedinwestv

6 ай бұрын

18:29 the Home Depot bucket

Love you videos Johnny! Learning a lot every video (Just like you 😃)

BEAUTIFUL table, Jonny. As for driving the Honda Ridgeline, I couldn't recommend a better truck. I've owned mine since new (2008). Fifteen years later and despite having one small blemish of rust, the truck still drives like new. (FYI, though, the truck is only part-time all-wheel-drive, but it's an amazing vehicle, all the same.) 😊

14:32 tables looking good Good designed

Awesome table. Good job!

"Where's Aldo" Way to push on, adapt and overcome Jonny. This table looks absolutely sick, I'm totally jealous, but I'm working on my skill set.....kinda. Congratulations brother. This is a beautiful piece. Take care and stay safe out there. ~Jonny5🥁

Great job! But I would use black bolts on the base.

Ive heard you mention OKC before but it never clicked that you were here. thats awesome

Great looking table man

I'm not sure which I'm more impressed with, how cool the table turned out, or that you took your payment in beer.....$12,000 is a lot of beer! Great job!

I liked it. That router blew my mind. I didn't know we were that far in the future. 😅

One other option for fixing the wobble would be to extend two of the left sunbeam rays from the logo through the footrest (?) area to the legs of the table. Providing that triangular support your H support missed. There would have been zero wobble from the beginning

NOSSA!. UMA OBRA DE ARTE. MARAVILHOSA.

Jonny this table is amazing, 👍👍 I have a question. I refurbished a bench. The kind with cast ends and wood slats. I used cherry and finished it with urethane however it delaminated over the winter and now the wood is weathered. Any idea of what finish I can use. It will be outside in the winter, covered in snow.

@JonnyBuilds

7 ай бұрын

I’d use Total Boat Gleam varnish. It’s made for boats so it stands up to the elements.

This is totally my ASMR. I loved watching!!