The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY. Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

@jakechunasamy9642

4 жыл бұрын

CarsandCameras can u tell me what that atv is called I want one

@redneckcreations1715

3 жыл бұрын

How much do you want for that little quad I want it

@jakechunasamy9642

3 жыл бұрын

Retro Vlogs he sold it

I think you should make an extended swing arm on the back and wheelie bars, tune it up improve the handling and use it at busco beech. Absolutely love what your doing guys keep it up!

@572chevybb

5 жыл бұрын

Don't forget independent front suspension

@CPOKAY2

5 жыл бұрын

+1, lengthen the frame out back, then it’ll take the power

@antwerx

5 жыл бұрын

+1 Come on guys extend the swing arm!

@alinazalewska1543

5 жыл бұрын

Njj

@calebkissinger5451

3 жыл бұрын

yeah get this thing to busco:0

3 minuets and 45 seconds into the video John has the biggest voice crack 😂

@faresalsalahi9764

3 жыл бұрын

lol

YOU GUYS ARE INSANE!!!! Don't stop. loving this!

Love ur videos, been watching almost since the beginning

Stretch it about 2 1/2 feet, widen the rear end and put a little larger sand tires on it. Also, at least stage 2 on the engine. Love the content of the channel guys. Please keep up the great work.

@DeliciousDeBlair

5 жыл бұрын

I agree! Stretch the back end like a mountain rail or a drag bike! (~_^)-b

@lcbcreation8205

5 жыл бұрын

Yes you know what's up

@joeofloath

5 жыл бұрын

I had a similar one and stretched it. Loads of fun!

@thedude738

5 жыл бұрын

This is exactly what I was thinking too, I'd love to see them do this!!!!!

@BuzzLOLOL

5 жыл бұрын

Should do 65 MPH as is... too fast for that sketchy little thing... and no brakes?

I so love your business model John! Not only do you get to work on crazy projects with your best bud, but one can film the other no solo camera shot setups! 😆

I don’t know why I’m so intrigued by this damn bike I’ve watched like every video on it, cool build guys.

I think y'all should stretch and widen plus full independent suspension on the deathquad, just my opinion, love y'all keep up the good work, I've been watching for years.

Love you guy’s ❤️ You guys Really inspire me on building homemade go carts and I really learned a lot thank you guys for everything

@driveitbreakitfixit7496

5 жыл бұрын

Smil3y_ TV to bad they get all there parts for free

Thanks for the inspiration guys. I'm in the process of building a 212cc apc electra chopper.

Woohoo what a little monster keep em coming we luv it

I believe when the chain popped off when doing the burnout, the axle actually popped forward. I would check into that. That could also be some power and speed loss.

@comptongokartracing3426

3 жыл бұрын

Austin Liveoak I saw that

@thedoerofthings493

3 жыл бұрын

It doesn't need anymore speed lmao

Extend the swingarm, build some suspension, and widen it...c'mon guys, don't give up on the wee Beastie!!

@dustinmiller7278

5 жыл бұрын

Wouldn't be so wee if you make it bigger

@allthoseclips582

5 жыл бұрын

Giant tires, longer wheelbase :)

It’s perfect as is! Great work guys I love it. More of a bar stool racer than anything else.

Keep going with the projekt! I diffently want to see you guys put some supension on it!!!

2:50 that looked like a move straight outa some trials gameplay Ike did there! xD

Jon’s scared to death of all 19 mph from that little thing. You can see it in his eyes when he’s talking about putting it up 🤣🤣

Damn it you guys made me purchase a Mini Bike and relive my childhood! How absolutely wonderful you guys are. My mini bike childhood days were like most boys the very best days of my life.

Love the content as always! I suggest an extended and widened rear axle and suspension system. Say 2 to 2.5 foot rearward and widened about 1 to 1.5 foot. Use the original axle mount as the mount for the extension bars. Make a mount under the rear seat loop for a large mono-shock and adjust for a few inches extra lift from larger tires. You could also use the existing rear axle mount as a point for a chain idler or tensioner and use heim Joints to achieve some articulation.

Stretch the rear end to make it wheelie less. Maybe move it 8 inches rearward

@taylorschlichmister9487

5 жыл бұрын

also change the rear sprocket gearing

@buridanjwh

5 жыл бұрын

this, and maybe widen it by a few inches. the rear axel should be about 8 inches behind where your butt is. and then you should be able to put some shocks on it.

@bev2423

5 жыл бұрын

Backword 🙄

@Nograc_

5 жыл бұрын

@@bev2423 backward

@hunterrrwlodarczyk476

5 жыл бұрын

@@bev2423 backward*

I quite like this concept of an engine on wheels, haha.

Super cool Mini Atv.I put a 212cc on a kids little dune buggy and that thing rips.Great job guys

Make a swingarm rear end. love the vids, keep em coming

Extend the wheel base. so you can seat more properly on it

@gmanshackshack6822

5 жыл бұрын

move those back wheels back... even just 6 inches

@redneckhb1494

5 жыл бұрын

I agree, on street bikes even just 3 inch stretch kits help with the wheelie control

@mikecarson4625

5 жыл бұрын

Maybe add some pegs over the front wheels, it might keep the front down and make a better ride.

@kylearruda1041

5 жыл бұрын

Good idea but might be easier to start from scratch

@allthoseclips582

5 жыл бұрын

+1

Put a wheelie bar on it.

@lilporno6583

5 жыл бұрын

Sean Chastain ok

I just got done riding my 200cc Baja warrior rat rod mini bike and now I get to watch you guess today is good

This video got me excited for summer.

Put REALLY wide slick go kart wheels and an extended swing arm on it. It Will be a beast

@chazrobertson1990

3 жыл бұрын

Would be cool to stretch the kid 4 wheeler and put bigger tires on it...and you guys are awesome

Bahahaha! It sounded just like your intro when tried to fire the motor in the mud!

OK, that was freaking HILARIOUS!

QUIT COMPLAINING JON this is perfect

You forgot to ask John to hold your Beer while you tried to go through that mud....LOL

A single engine 4wd rally kart would look awesome. Shaft or chain drive 😏 good bit of fabrication/engineering for you guys to work out.. Great content none the less

“BILLY POP THE CLUTCH” 🤣🤣🤣@ 2:53 Great videos guys!

Build a trailer so you can pull the quad behind the monster truck. Lol

The VW was the "Harlequin Golf"

@dustinmiller7278

5 жыл бұрын

Wasn't just the golf they also made a Jetta and a shirocco of the same year I have videos of the Jetta version from a car show in Washington (all factory paper work with it was a real deal)

@taylordarr3

5 жыл бұрын

@@dustinmiller7278 negative. Only the mk3 golf was OEM harlequin. If someone did it to a jetta, it was after leaving the factory. Also, it's "scirocco".

@KodiTufo

5 жыл бұрын

@@taylordarr3 it was a dealer thing. Not a factory thing

@taylordarr3

5 жыл бұрын

@@KodiTufo incorrect. The vehicles were completed in 1 of 4 colors and then assembly personnel disassembled and refitted the panels on different colored cars.

@JoshTHankins

5 жыл бұрын

@@taylordarr3 there was also a MK5 rabbit. I have never seen on in person, but the commercial from 2006 has one in it. kzread.info/dash/bejne/lGpsqc9uiZnghKQ.html

* Correction * Its a MINI trench digger! LOL! BUT only in semi-dry conditions... 🤣 Note to self... Melted rubber burns! Thumbs up! 👍🏼

I have been watching since u guys had 17 thousand subs

Extend the back end , widen the back axle, put beefier tires in the back, maybe a single shock (dirt bike style suspension) and highten the handlebars....maybe with a steer damper. Would be a beast...kinda like one of these dune/drag racing ATV:s. Greetings from Northern Sweden! Thanks for years of great entertainment, as always keep it safe but have fun!

poor truck has a flat tire :( lol great video. can't wait to see that truck on the road

I'm telling you guys EXTENDED SWINGARM! And bigger tires, Make that thing rideable!

@LeoTonius

5 жыл бұрын

It'll mess up the whole idea.

@Steve_Just_Steve

5 жыл бұрын

@@LeoTonius The idea of what? Scrapping the project because it's "too dangerous" and not rideable? F that idea.

I love your builds yas got some great ideas

Great video you two

It's Adorable.. 😅😋 You guys should rig up a Crash Test Dummy to ride that thing.. 😎

@jacobsebastien3910

4 жыл бұрын

Lol

You guys should stretch it and move the foot pegs back to where you have more of a sportbike feel and if it needs it put a wheeliebar on it.

Extend frame and swing arm for sure! Has the potential to really be a nice cart

Laughed when I saw the neck brace. Spit out my drink when I seen the back brace lol

@Nate-ev6sg

4 жыл бұрын

Imagine these guys on a banshee

Stretch it and put a 2 smoker in it. 60-80-125cc in it

@Baldys_projects

5 жыл бұрын

Oh yeah give me a little four-wheeler like that I'll put a 66cc 2stroke bike engine on it haha

@nicovanduin1553

5 жыл бұрын

@@Baldys_projects those bike engines are gutless

Extended swingarm full suspension around it and wider stance. Think it’ll be the first Chinese kids atv with an extended swingarm that I’ve seen 😂😂😂

Extended arm and weights on the front. Best of both worlds.. I feel like this is the drag quad everyone deserves.

I would cut the frame and extend it forward and make a drag quad out of it just for short runs of course love the episode keep it ip

The golfs you’re talking about are the harlequin edition

Stretch that rear section and make a baby hill climber. That would be sketchy as all get out and a fun show!

Most sketchy build yet might even top the red wagon cart. Love the content guys keep up the fun work and stay safe. I'm still waiting for a true 4 wheel drive go kart with full drivetrain out of a 4 wheel drive quad.....

Haha...love watching two brothers-from-other-mothers having fun! You guys are killing it. Great niche. Maybe the Grand Prix could be extended to twice around to make up for Johns advantages? :p

The Volkswagen you're thinking of that's all different colors is the Golf Harlequin.

Extend the rear part of the frame to move the rear axle back.

That thing is a perfect candidate for an extended rear. You could sit back farther for better comfort and weight transfer and I think it'd be less darty on steering you could maybe put some foot pegs way out in front of the front tires like a chopper so you can stretch a little. Cool build!

Love this channel! Keep up the great work!

Haha it looks like your riding a 1/5th scale rc car.

@gunner8709

4 жыл бұрын

Yea

@crusader1945

3 жыл бұрын

I would say 1/4 scale but yea

@maximumrpmrc2312

3 жыл бұрын

It dus

@TuckerBlack

4 ай бұрын

Just looks like an xmaxx

Don't park it! Stretch the rear end out, put a wheelie bar, and some kind of suspension in the front

@stevemanske4321

5 жыл бұрын

Bryce Flinstone gnhubbbbhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhehhen hbhbhhenhbhhnhb ehhehhhhhehhhhhb r rbhbhbrnnhjhjhjhhjhj. B

i love it i want one!! need to stretch it just a tad makes it more comfortable add the suspicion and bigger tiers and make fenders to stop the mud and then go riping

@CarsandCameras here’s an idea: remember the cool little “mini-rig” that was at GPS a couple of years ago? I think it’d be a cool tribute to the passing of Burt Reynolds, if you guys built a gocart version of “Bandit Two”, the Kenworth in Smokey and the Bandit. Start with the Tilliquad, using the motor for the truck, using the wheels and tires for the trailer, then take the frame, handlebars and seat, and install them in... well, the nearest scrap-pile, preferably. 😏

Stretch the frame to keep the front end down to reach it's full potential.

@SPEEDY1894

5 жыл бұрын

Way too much chain if they did that

@termone1493

5 жыл бұрын

@@SPEEDY1894 Jackshaft...

@SPEEDY1894

5 жыл бұрын

@@termone1493 yah they are famous for that :)

@termone1493

5 жыл бұрын

James woods yea just stretch it longer than the dragster and put like 15 jackshafts... easy

Ya'll need to stretch it and beef it up..

Cant wait to see you guys at busco! Im bringing a 9hp 212 predator kids minibike that ABSOLUTELY RIPS. Also threewheelers...

Mad ride!

Everyone says "stretch it" , "wheelie bar" etc. What they don't understand is that you guys always try to get the most out of stock frames. If you mod it too much, you might as well build from scratch.

@rogue5861

5 жыл бұрын

Tracy Autumn they already cut it up, no reason not to stretch it.

I have the same mini quad. I think im going to put a predator 212 on it now lol

@hshsshhwhwejejeje6652

5 жыл бұрын

Cody Stewart whats the quad called? I’m trying to find one

@codystewart1615

5 жыл бұрын

@@hshsshhwhwejejeje6652 I dont know the exact name, but ebay carries parts for it listed as a pocket quad or mini quad 49cc. Something like that.

I was thinking y'all need to add a wheelie bar to it. Like the one y'all put on the little black mini bike.

i would like to suggest learning video on tuning torque converter with different springs for more performance like some higher rpm taking off

You need a four foot teenager to sign a waiver and go nuts on that thing

@Alfred..E..Neuman

5 жыл бұрын

I was thinkin more like a 3 foot midget!!

@Professordunce1

3 жыл бұрын

I'm 5 8 and thirteen I'd ride that.

@christycopley4463

3 жыл бұрын

5, 3 13

Put a wheelie bar on it and call it mini drag quad (like if u agree)

Extend the rearend n put some wherls like the drag rail on there n beef up the engine i love watching y'all been watching yall since 2017

Keep it up guys we love the videos, mabey a 1/4 scale nascart for some racing time with both of you!!!? Mabey another monster truck for ike, mabey a 4x4 diff from a Polaris atv this would be very cool, it can shift on the fly from 2x4 - 4x4 if you use the scrambler electric parts and diff !!!!!!!

why don't you guys try and stretch it so it does not wheelie all the time lol

Build a trailer so the monster truck gokart can pull the 4 wheeler😂😂😂😂😂😃😀😊

Epic builds guys much love from new zealand, u should totally make it remote control. 1. Totally different 2. Think of the possibilities 3. Do it. 🤙

You wanted us to come up with ideas for you to do... 1) put a Honda GCV160 5.5hp engine from a MOWER(yes, vertical shaft- all you have to do is rotate the carb/intake/relocate gas tank) onto a bicycle 2) put a Honda gcv160 5.5 vertical shaft engine from a mower onto a go kart 3) put a chainsaw engine or weed eater engine on a longboard 4) make a dual predator 212 powered tandem bicycle (that way you don’t have to “rockpaperscissors” for who gets to ride first) 5) swap some of the predator 212’s you have on your builds with predator 420’s ***note: the Honda mower engines are things you can easily get for free on Craigslist. I have one that I’m happy to do a project with you guys if you want. I live in NC probably under an hour away from you guys and have major ties with Elon. I emailed you and you never responded:(

You really dont need to go much faster then that. 19 mph is fast for that thing.

I hit the like button and it was 212 likes

@mehgusta

5 жыл бұрын

IMPOSTER.

Loads of ideas for something like that.... Move whole rear axle back (extended swing arm type thing), some sort of rear mud guards, lower tooth sprocket, go all out on the carb tuning (jet drill, porting) see if you can get it to rolling burn out

I made something similar, a kids 50cc pocket quad with a. 110cc pitbike engine with gears, was great fun I extended the rear end to stop wheelies but it's gets so tempting to drift everywhere now lol also extend the handlebars upwards to make it easer for tall folk! Once you get up towards 30mph they get very twitchy on the steering if you snap off the throttle

you guys need to get those super knobby tires that are made for snow blowers for that 4wheeler. They would look and perform awesome.

At 39 seconds Ike looks like a pelican. Sorry that was to good to let it go. Keep the the good work.

Nothing beats to see pure fun than a grown ass man on a little atv.

Quad bike looking like Optimus Prime Red and blue, "Autobots, Roll Out!"

Add some width to it to stabilize it out. Then extend the rear swing arm to make it more stable during wheelies or hard launches. After that youd have a very stable very quick lil monster.

U guys should do giveaways that u have to buy merch to enter to win some of the old projects. Great videos👍👍. Id like to see u guys make a full blown like Can Am quality Atv with some homemade frame u guys built and a street bike engine

Extend the frame/wheel base, larger wheels and tires, and front end weight... be a neat little drag/race quad!!

I've been saying for decades. A company should make a mini quad!

You guys should try getting your hands on a rolling three-wheeler chassis. It would be fun to see what you guys could do with something that isn't a normal atv or gokart. :)

Ohhh gawd this thing rocks lmao show up to a dice run with this bad boy hahaha

When doing seat put extra lift I back portion to help with sliding off back, like some bigger motorcycles have.

you guys and rather B welding should go to busco beach and compare mini ATV's I would really like to see that video

I had the exact same type of four wheeler back in the day but mine had front and rear suspension

Stretch it , slicks in the rear and a wheelie bar and it’s the perfect companion to the drag mini bike .

Stretch the frame add wheelie bars , big paddle tires and a TC and set it up for sand drags at Busco Beech !

Ive been looking for a Hemp Beaded choker, where did Ike get his? very cool design. Keep up the builds guys, awesome vids