100mph? Pure and utter NON stop carnage - Does the 6s TRAXXAS Slash 4x4 survive this ordeal??
Check out my ebay course here: kevin-talbot.teachable.com/p/...
Like and follow my Facebook page see videos earlier! / kevintalbotvideos
Follow me on instagram / talbotkev
Videos Uploaded most days, Subscribe so you don't miss them :)
Пікірлер: 651
Like and follow my Facebook page see videos earlier! facebook.com/kevintalbotvideos/
@zidenzz
6 жыл бұрын
Kevin Talbot Can You please put aerodynamic parts for your Slaah please like If You agree
@noahlunde6375
6 жыл бұрын
Name on the tires?👍😉
@kevinquinn535
6 жыл бұрын
Kevin Talbot I’m ur 1k like in this vid hope your happy
@freddiesellick6909
6 жыл бұрын
Hey kevin you need to put a diffuser a rear wing and canards on your slash to keep it on the floor
@navy_4329
6 жыл бұрын
salut
125 degrees isn't that hot... Oh wait that's Celsius , holy shit
@everythingplays5184
3 жыл бұрын
It was
@GreenRanger91
2 жыл бұрын
😂😂😂😂😂
R.I.P Velineon motor You will be remembered...
NEXT VID PUT WINGS ON SLASH AND TRY TO FLY!!!!!
@shubhamjoshi2399
6 жыл бұрын
GengarMan 57 bhai car Lena ha
@recklessrcs6528
4 жыл бұрын
Lol
Can’t believe how far this channel has come in such a short time. Awesome job man can’t wait to see what’s next.
Thanks for the arrows to the GIANT tire, I did not notice it at all!
@Trumpethon
4 жыл бұрын
Aaron Lundqvist lol
Well, I guess put a buggy spoiler on and a cardboard or aluminum splitter.
It's almost kinda scary watching it just take flight like that. Also RIP that beautiful flotek body! But good vid as always Kev!
Been watching from America for a while now. I love your channel and love the hobby. This channel got me into the hobby and now i cant get enough rc bashing mudding and trying new things. Keep it up.
Did not expect the motor to survive that
Make a rc for speed only
@michaelargumedo7267
6 жыл бұрын
I would love to see kev build a speed machine. Strictly for spees runs.
@niei6218
3 жыл бұрын
Well your wish become true
@davidconant6275
3 жыл бұрын
@@niei6218 I was gonna say that
@mike_oxlong5496
3 жыл бұрын
It....happend
@tysemilicia9548
2 жыл бұрын
@@mike_oxlong5496 and then it crashed
Kevin you should put expanding foam inside of tires
Insane Kevin you prove to us all is possible with these rc rigs love it keep it up
Love the videos and the trashing you give your cars, its inspired me to get a XMaxx, especially love the snow ones as i don't get snow here in Australia.
This was kind of painful to watch hahahaha
@olgabondarenko6436
6 жыл бұрын
_RC_KING_ it’s not painful to watch when you know that the man gets 100k
@olgabondarenko6436
6 жыл бұрын
Lol🤣🤣🤑🤑
@imdedinside8053
5 жыл бұрын
*crunch*
@Speedslays
4 жыл бұрын
Lol entertaining
@nocash.6207
4 жыл бұрын
@@NioPoncin His life is RC, well I guess he's got the luxury lol
Great video I love your channel can't wait for you to get your e revo 2.0 I'm buying one 2
Now that’s a first!!! Tolling backflip with a Traxxas Slash!!!😂😂😂😂
@Baldys_projects
6 жыл бұрын
Bakerboyzzz RC i do them with my 2wd slash on 4s and 6s power
@Fats-yg1jd
5 жыл бұрын
that velineon motor is taking that 6s but it does say in description that the velineon motor has not limits !!!!!
That little bit so ice made me laugh we have 15 inches of snow where I am. That slash is tough as nails.
@pahowitzer446
6 жыл бұрын
A I have seen him soak all his plastics in wd40 over night. He says it makes the plastic more flexible.
I wrecked my brand new body having my rustler flipping back at full speed just burnt a hole right through it
Hey Kevin can my rustler velinion not burn up with 4s if I put some other esc
You guys are a friggin riot! I have worked in LHS for years and the things we used to get into after hours....I wouldn't put that online if you paid me. We did the same thing one day but threw on a pair of X-01's wheels, fastened a Ziploc baggie with Mr. Freezie popsicles over the motor and cut out some vents on the hood/fenders on 6S....just don't drive near yourself. I'm sure someone online had to of tried that. Anyways, awesome vids, made my day so I think am going rc'ing now :D Keep your pecker up mates
6s was awesome to see, but it was also cool to see how well behaved it was under 3s
Pats laugh just makes the video it’s great 😂
We said you'd like the MIP's. ☺ Awesome vid from a fellow Slash lover.
so. im torn between 3 trucks kevin. sxc10, trx4 or the new wraith. never had the opportunity to drive any of them and wont. in an overall package for a trail truck ready to go which of the 3 would you reccomend? they are all about the same price
Try 5s or 6s with the stock tiers, smaller, griper, less ballooning. Will all that help you get faster speed runs?
@alexanderuzan5892
3 жыл бұрын
I do not think that there is a 5s
@kennethjames3925
3 жыл бұрын
@@alexanderuzan5892 a 5 s battery does exist. I have a few for some rc planes I fly. They are normally made in planes sizes like 2200, or 1600, so they would not be ideal for cars but they could work
where did you get that tube chassis from? was it bought or custom made
I have a 1/16 scale and care about it so much and seeing this brand new body scraping the concrete and sliding across the street hurts! Great video overall though. Great idea..
Does that thing have wheelie bar cuz it should if it's getting that much air
Oh wow this is incredible those traxxas motors are very very good .
So you can safely run vxl 3 motor with 4s or 6s battery with Ecs?
I keep burning out My’s Berg ear what one do you suggest on my TraxxasLink 4 x 4
Sick, how this slash handles all those beating... love to see this stuff. Now i want a slash also haha
That goes fast now! Just put a hobbywing Max 10 Esc in my backslash. It's been fantastic so far!
What do you guys prefer the mamba x castle motor or the traxxas velenion. I’ve always been a sidewinder user but those mamba motors look insane, also the velenion in my friends rustler makes the sidewinder look slow. Thought?
@KevinTalbotTV
5 жыл бұрын
mamba x
@roblignell
5 жыл бұрын
Kevin Talbot that’s what I was hoping to hear thank you 👍🏽
You need to fabricate some type of front aero to keep the front end down, plus those massive pizza cutters aren't doing you any favors keeping the front from lifting and catching all that air. Love your vids, they're mental.
@KevinTalbotTV
6 жыл бұрын
thanks dude
@wildstyle2738
5 жыл бұрын
With 6s just weight its front end down ...will need steel driveshaft tho or loosen slipper to save plastic drive shafts
@warmfreeze
5 жыл бұрын
tires change diameter...its like a CVT going into high gear...and with electric torque thats instant, it just flips over..
@GarzaLovesYou
5 жыл бұрын
He needs XO-1 tires
Put slime in your inflatable tiers like if you agree
@snowyi8
6 жыл бұрын
Try it
@STEVOD313
6 жыл бұрын
What’s with these kids n slime these days,craziness
@RSmerlinRS
6 жыл бұрын
I agree for science.
@user-uz2xs5ng3c
6 жыл бұрын
Haha nice one
@imdedinside8053
5 жыл бұрын
But why slime of all things
Another awesome vid kev,keep up the good work
@andrewbarker2495
6 жыл бұрын
RIP. trenchers
There goes that new body😂😂😂
@KevinTalbotTV
6 жыл бұрын
yeh shes done lol
Nice vid kev, looked like fun lol you should get a max 8 combo for your slash 4x4
Never gets old the Benny Hill theme music lol brings back some funny memories
Those speed run backflips were amazing!
These videos are fantastic!
Nice vid kev.! As always
magnets in those motors lose magnetism around 200f (being nice with that number) which is 93c that motor was at 120c 248f wondering how it didnt melt
@evanhexter5532
6 жыл бұрын
Lucas's Technic Corner I was very surprised that the motor didn’t just melt. This motor will not be lasting much longer lol
@killingtimeitself
6 жыл бұрын
they get too hot and magnets in theory lose magnetism or the other internals fry which is just as bad
@mikosillanpaa6194
6 жыл бұрын
They are rated ultra high temperature though
@killingtimeitself
6 жыл бұрын
where does it say that? also if the motor could take that heat why wouldnt the esc be able to?
@killingtimeitself
6 жыл бұрын
miko he said the magnets are rated for high temperatures but anyone can answer it
Kev how is the best way to wind a pull start spring back into the casing
@KevinTalbotTV
6 жыл бұрын
its easy but not to explain! there must be a vid on youtube
how did velineon 3500 handle the bigger esc and battery? especially heat wise?
@_savageasfck_
11 ай бұрын
Them Velineon's are the truth! My Slash 4x4 is 13yrs old and still smokin newer, "faster" rc's
Stadium trucks r awesome!!! Great video kev!!
@backlashD
6 жыл бұрын
Brent Svoboda But the Slash is a Short course truck.
Hit 1 million sub nice good job keep it up. You deserve it
Hey Kevin! Do you still have the stock steering servo and servo horn on your basher TRX4?
@KevinTalbotTV
6 жыл бұрын
no, ripmax servo and alloy horn
@Pb_Slinger
6 жыл бұрын
Kevin Talbot thanks!
Love your videos man
Possible for a tiny wing/spoiler for down force?
Hey kev what ESC are you using? I might want that on mine if it’s affordable
Hey Kevin, which slash version is this (newb here)? My buddy has a stampede and cannot run more than 5minutes without breakage. Meanwhile you’re flipping and rolling, all over the fecking place! And no breakage. How?
Hey Kev what gearing are you running in the xmaxx please great video always watch them all
what kind of drive shaft's do you have???
Can't deny the slashes can take a beating, that's what I got for my son and only thing that broke was a front a arm got lose and hit s metal swing set pole I have a video of it hitting hard
For mine with a erevo brushless motor and esc with 2 3 cell lipos i had to install a rear wing on the front for down force it makes all the difference.
Nice to see the monster truck frame!
I really like your videos, it's spectacularly
I wonder if taking off the top cover will help it not just want to take off in the air. Or course a spoiler in the right spots would help too. Can't wait to get my new vehicles.
Who to bay this battery
Keep up the good work kevin
What are your go to battery brand
Would you sell/ship a broken truck to to the states?
What type of wheels are those
why not bold a wing on the front to keep the front down at speed?
What battery is that
What do you do with all of the broke rc cars
I just got done fully building my slash 4x4 with a 1415 2400kv sensored motor and sidewinder 4 and I’m honestly terrified to go flat out. I was testing in my basement and tore a hole in the carpet... needles to say it is no longer allowed in the house
What motor motor setup is that kevin?
Standing backflip slash I love it
Now you need a wheely bar!
@penuuu0195
6 жыл бұрын
he needs a Long version....
@johnfamulski6925
5 жыл бұрын
Lol it needs like 5 😂
Trop de puissance ! :'-)
How do your tires stay on that well!? I have a 2wd that I swapped with a velenion system running only on 2s and I’ve shot the foam out of a tire and put a hole in one of them! Lol
CONGRATS ON 61K
6S WOW That was funny Keep up the great work!!!!!
The intro reminded me of the old top gear intros back in the day
Can a slash 4x4 Vxl handle a 4s
This is the only video i watch and my thought about to buying wheelie bar for my traxxas slash.... "4x4" lol!!
So fun to watch your video
Kev u blew the wheels off this thing,CARNAGE! 😂🤣👍👍👊👊📹📹
Haha its so like Kev to get a brand new body and then beat the living crap out of it :P Awesome video! I'm proud of that little vxl motor handling that rough 6 cell power!
Maybe if the car was only fwd it would not flip all over the place, what do you guys think?
MAN that Traxxas slash was like a rocket
I wonder if you put wings on it would it fly
Kev you rock love your vids,You always have fun and it makes your show fun to watch,and if you cant have fun in life why be here,Keep up the good job man!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Want to sell on EBAY will bye your cours soon just need to save a little more $. Take care bud see u on the tv tube soon.
Man i love my slash and cringe watching this bit i love ur vids to much and love carnge
Lmffo benny hill background music shit dude fell off my chair! Made my day! Epic!
What gearing where you running?
Turn it into a ricer and add hideous wings to keep it down?? would be fun making and testing :))
Why three fire extinguisher s?
How is it still working
I need help with my 4x4 stampede it making a loud grinding noise
@alex.jaeger1714
4 жыл бұрын
Striped gearing bad diffs
This is like when I upgraded my rustler to a big ass brushless motor along with a few other things. I ended up putting a big impact socket at the front so instead of doing wheelies it just flies
Is it 1/16 slash 4x4?
Back flip speed runs awesome 👍🏽
Velineon motor broplem 6s lipo?
Wtf... survive... unreal ! nice dude ! :)
Probaly should put a heat sink on the motor
@KevinTalbotTV
6 жыл бұрын
yes!
@tbtdylarn8611
3 жыл бұрын
probably probably melt it lol