Hahahah. Got halfway through vid before I realized it a rzr and not the krx. Lol.

@XpensiveDecisions

Жыл бұрын

Yeah the KRX has a really good ratio from factory. After this upgrade it was almost exact same as the KRX

Make sure your belt Alignment spot on if its by like1/8th inch will burn up belts quick!

@XpensiveDecisions

2 жыл бұрын

Agreed. We got it and it has been working with no issues.

What Satv Part Numbers did you use? Size Tires? I am torn currently about doing this. im trying to figure out my % reduction that i want. 17 xp1000 on 32s with giloman tune and clutch kit. wanna go to 34/35s trails/rocks/ is my normal. its not dedicated crawler. Your setup seems to move very very easy with light throttle

@XpensiveDecisions

2 жыл бұрын

I like it a lot. I wish high wasn’t as low, I am turning some RPM. The whole kit is GRK-P-RAN-001-K Has GRK-1-33-001 and GRK-P-RAN1K-12

@zeks05

2 жыл бұрын

@@XpensiveDecisions Are you on 35s? Can you still maintain 65Mph in high?

@XpensiveDecisions

2 жыл бұрын

@@zeks05 I am running 32s and it will go 65 but haven’t tried to maintain for a long time. At 50 mph it’s over 6k rpm.

@zeks05

2 жыл бұрын

@@XpensiveDecisions well accordingf to OEM end of shift phase is 8000-8500 for 55mph. so with my tune mine will run up to 9200. Do you think it lowed your high gear more then you thought it would. i have been looking into the parts seems they lower the the % between the gears like the reduction is the same % across the board so to speak.

@XpensiveDecisions

2 жыл бұрын

@@zeks05 I don’t do a lot of higher speed driving so it works fine for me. I do like lowering high range bc I think the split between the extra low and a factory high would be too spread out. Mine is really comparable to the trails and rocks factory gearing now and the factory KRX gearing.

Looking doing gear reduction on a 2018 xp4 1000 running a hunterworks thick belt right now which helped allot but we carry allot of weight 4 kids so it's basically a school bus so how does it handle on the trails as far as speed in low on trails

@XpensiveDecisions

2 жыл бұрын

Really great. It does so well that another friend that rides with us installed on his 2021 XP 1000 4 seat and he said it is a whole new machine.

@nathanmatthews3102

2 жыл бұрын

Thank you for your help this is our first machine and we're learning on the fly

@XpensiveDecisions

2 жыл бұрын

@@nathanmatthews3102 that’s why we do it. To maybe help someone get a step or two ahead. We have learned a few hard lessons.

@nathanmatthews3102

2 жыл бұрын

@@XpensiveDecisions I would say so thanks again!!

Nice video. Just curious, is the gear reduction across all gear ranges? I’m no the ledge about doing one on my 19 1k.

@XpensiveDecisions

2 жыл бұрын

Yes the double we installed affects high and low range. You can get a low range only but I was worried about the spread between them.

@head458

2 жыл бұрын

@@XpensiveDecisions I’m leaning towards the 25% just for the simplicity. I’m currently stock with a dalton clutch kit running 32 zillas. It does very well for what it is. I twisted my front prop shaft in two this weekend so it’s looking like time to do some upgrades

@XpensiveDecisions

2 жыл бұрын

@@head458 Would definitely help out, I didn’t have many issues until I went with sticky zillas. Did a gear reduction after replacing belts almost every ride. My last ride claimed the front diff and a sandcraft drive shaft

@head458

2 жыл бұрын

@@XpensiveDecisions ewwwwww. I went with the full rhino cv prop shaft. We gonna see how it holds up

@XpensiveDecisions

2 жыл бұрын

@@head458 they are good. Blue highlifter in videos has that set up. He is running 35 zillas

What size tires do you have?

@XpensiveDecisions

2 ай бұрын

The rzr xp1000 had 32s on it. Can fit 35s with forward a-arms

Do you guys like that sand craft drive shaft I just ordered one for mine

@XpensiveDecisions

2 жыл бұрын

Yeah it works great. I haven’t broke or hurt it yet.

@pete1735

2 жыл бұрын

Thanks for the info

@XpensiveDecisions

2 жыл бұрын

@@pete1735 No problem. That’s why we do some of the tech videos and not just riding.

You may have said it but what % reduction did you go with?

@XpensiveDecisions

Жыл бұрын

37% overall. 12 and 25 kit.

What are the percentages in low high in reverse?

@XpensiveDecisions

Жыл бұрын

It was a 37% overall. It was a 12% and 25% kit. Never really noticed a change to reverse. Low and high was a big difference. If I had to do again I wouldn’t get as much. Really affected normal road driving.

@montanamav8941

Жыл бұрын

@@XpensiveDecisions I'm looking to do one on my xp 1000 also. What do you recommend?

@XpensiveDecisions

Жыл бұрын

@@montanamav8941 difficult to answer, how do you ride? What is main way you use machine? What size tires? Any extra weight added to machine?

@montanamav8941

Жыл бұрын

@@XpensiveDecisions I ride alot of mountain trails and rocks. I also run down fire roads. 32s. I'd like to have a lower gear but also keep my high for running down the road

@XpensiveDecisions

Жыл бұрын

@@montanamav8941 I would go with the 13% or the 25%. 25 will hurt some road riding but will be a lot better for the tough trails