$1000 to make this Budget 4WD TWICE as good off-road! Can it outdrive a MASSIVELY modified HiLux?
Автокөліктер мен көлік құралдары
In this episode Jocko upgrades the transfer gears, widens the wheel track of the Toyota LN106 HiLux - two mods that'll make it go way better off-road!
But then he challenges Matt to a drive off in his Solid Axle swap Toyota HiLux on 35in tyres! How does he go? Watch to find out!
Jocko's on a mission to turn the Pony lux into a budget build 4WD capable of taking on the toughest 4WD tracks in Australia! Using some of the best and cheapest 4WD mods money can buy, the Pony will be getting new offroad upgrades in every episode. We'll show you the REAL difference each mod makes offroad, helping you decide on the best mods for your 4WD.
When the build is finished Jocko's going to enter the Pony in a 4WD competition to go up against purpose built competition and winch trucks on some INSANE tracks!
For spares & service parts, visit www.sparesbox.com.au/
Jocko's 12v & camping equipment: www.australiandirect.com.au/
Great UHF comms for your 4WD: oricom.com.au/deals/
Top quality filters & consumables: www.rycofilters.com.au/
Purpose built suspension kits for your 4WD: fulcrumsuspensions.com.au/
Пікірлер: 627
Shauno's Brand new, straight off the showroom floor 200 series.... chopped and extended! Jocko's 25 year old bashed and bruised "pony" Hi-Lux..... Totally different builds, costs and mods, but both totally engrossing and entertaining! After you've finished both trucks and used them for a while, I'd love to hear what you love about each, and what you'd do differently! Thanks guys from Scotland. 👍🇬🇧👍🇦🇺
@seckintufan5191
3 жыл бұрын
Hilux will overcome 200
The vegemite reference for packing bearings was spot on mate😂👍
Mom: What are you doing? Me: Online classes Mom: Who is your teacher? Me:4WD 24-7
@xXTHEBOMBSQUADXxGaming
3 жыл бұрын
Yes funny
@veneratedmortal4369
3 жыл бұрын
Professor Jock?
@SamKhan-lk5pf
3 жыл бұрын
@@christurner68 and still you in their class taking lectures 😂
The amount of tips in this episode is INSANE... THANK YOU Jocko and Matt
JOCKO the legend, the real driver that drives real 4wds. Love how the pony lux is coming along mate ,now go and out drive all those $100,000+ rigs. 🤘🤘🤘
Yep, I rolled mine. Lucky it landed back on its wheels because I was a long way from home.
Think breathers might be a sensible next mod 🤣
@oldluxy
3 жыл бұрын
Think only the diffs have breathers on the ln106 you have to drill an tap in a breather for gearbox I was told
@marcelpotter7424
3 жыл бұрын
Need to run vent hoses from difs and tcase up high between cab and box! 😊
If jock sees this I have a 106 tow bar in Canberra he can have for a case of vb
@rosswilson8402
3 жыл бұрын
second hand turbo
@chasinlines4803
3 жыл бұрын
@@rosswilson8402 ???
@ventura9513
3 жыл бұрын
throw it in the tip mate, cause no one likes VB ,,,,, haha jokes buddy
Since getting absolutely obsessed with this channel a few weeks back and consuming every video they've made, Jocko's my favourite. Really good explanations, funny and just seems like a top bloke.
Great episode. Love all the 4WD Action vids but the budget build with Jock and Mack is one of my favorites. Keep up the Excellent Work! You guys rock. Cheers
Seriously Jock you are unrated, great build and info sharing - I love the technical driving
The Pony is coming out really good. A turbo would make it better when mudding and sand driving. Bar work is essential, especially a rockslider and a high mounted rear bumper (cut the lower section of the bed) ... but something that i would definitely do is a RUF conversion with high steer, so you get rid of the stock steering system that´s not very reliable. Kind regards form Brazil.
@HannibalACP82
3 жыл бұрын
I really appreciated the side by side crawl off!
@betterdenu999
3 жыл бұрын
It’s meant to be a budget build mate
@tylersuzor1804
2 жыл бұрын
@@betterdenu999 RUF costs barely anything mate, cheaper than mods they have already done...
@gwmechanical7402
Жыл бұрын
It's meant to be cheap...
Thanks for the show it's great to see how those on a tight budget or just don't want new cars or parts can learn how, cheers.
Absolutely love the driver training you guys do because I can use the techniques even in my stock pajero obviously on smaller challenging tracks
That was great what a difference, I've been asking for awhile in tutorials to show foot work alongside driving a challenge. Awesome 👍
Would love to see some more in depth instructional type vids on maintenance mods, cheers boys love it
These budget videos are the best. Please keep em coming 🙏
Need more videos with Jocko! Great work mate 👍🏻
I look forward to drinking a few beers on the deck and these videos every week. Good work guys
I want Jock to be a permanent member of 24/7. I really enjoy his knowledge and humour! Shauno and him cooking last week, the best hahaha. Keep up the awesome Vids Jocko!!!!!
"Here's this thing that will cost you plebs about $600, but we just happened to buy it off a 'mate' for $50...and look! A big box of stuff just happened to land on my desk from Sparesbox. What luck!"
@SteelmoonWatches
3 жыл бұрын
😂
thank you for detail video on mods areas next further to turbo and long-range tank
Great video. Love seeing this capable Lux getting modded.
Loving the Pony! Definitely like the idea of giving her a tummy tuck. Great video on wrenching on her! ❤️🐞
Tera Low transfer case gears are one of the best things I did to my Isuzu after I went to 33's. So much more control and not nearly as much clutch use.
love the lil yota! rock packing trails has gotten my 2wd through some tough trails. might want to run some new vent lines on those axles, trans and case. have fun keep it on atleast 2 wheels.
Jocko you are a natural presenter mate. Love watching your segments and love the old hiluxes.
Awesome build guys keepin it real and doing it in the shed luv it
Build is so relateable as its what the everyday guy can afford - keep the vids coming mate
Love it... Jock still calls this lux ‘ the pony ‘ no matter all these budget friendly quality upgrades turning into an absolute beast 👍🏻 Can’t wait to see the pony up against sooty or the dirty 30
Had to smash the thumbs up after just 0:37, just for Jocko's enthusiasm!!!
Got to love how interchangeable Toyota parts are!
A dimable LED light strip under the bonnet is a great cheap mod. I doubt you'll have any issues with the mighty 2.8 but it's so handy to have good light under the bonnet if you're stuck somewhere after dark. Also handy for a bit of ambient light at camp, makes stumbling back to your swag just a little easier.
Winter in Colorado. So jealous! Can't wait to get back out on the tracks!
Love your work Jocko!! Man you know how to steer a 4be. Combo of the up grades and the way you steer the big rig, she will go anywhere.
I'm sad Shauno isn't doing something similar with Daryl, even though I'm not a Nissan guy
@trueaussie3097
3 жыл бұрын
Give it time
@mohammedmuzakkir9803
3 жыл бұрын
His busy with his chopped 200
@leadingseamanphilbillingto100
3 жыл бұрын
To be fair, Daryl is pretty well rooted engine wise.
@osiris571983
3 жыл бұрын
They did something a couple of weeks ago where they went out and chased Jesse around in his comp truck in the Glasshouse....
@u303695
3 жыл бұрын
100% correct. There's plenty of GQ fans out there, and its a brilliant canvas to work from.
I have to say Joko. I have learnt mor in this one episode, about gearing and driving than the whole time watching Shauno and Graham. Thanks buddy.
@jocko4wd281
3 жыл бұрын
Thanks for the feedback mate!
Great see, mods that are done in a shed, no huge budget 4bys but under 10k and basic mechanics 👍👍👍
Loving the budget build on the old Toyota Hi Lux . Its one capable little rig that’s for sure .
I hope you fixed or raised the vent tubes from the axles, transfer case and trans to avoid water getting in during the next inevitable water crossing! Cheap mod... delete the entire hitch receiver tube and weld on some recovery points/D Rings or whatever to the hitch cross bar. Maybe trim the rear bumper mounts to tuck the rear bumper in a little too. Great video!
Loving the build Jocko!
Hi Jocko, Just love that you have become a bigger part of the show. What you are doing to this Lux is just to cool! Is it posible for you guys to make a list of all the parts you put on the Lil pony? Many Greetings form Denmark. Again just love the pony project!!! Keep it coming.
Loving the Pony Lux build! Just wondering if you have and if not would you be able to do a bit of a rundown on Matt's rig?
Awesome information! Thanks
You guys are absolute legends keep it up 👍
good to see you doing the bearing repack properly :)
Thats a beast man, the old lux are my fav, awesome watch
Jocko thx for the content ,you have the best videos,for the working man,Graham and shano are doing the rich boy thing now..so thank from the United States 🇺🇸
Awesome! Shows what can be done on a budget...
Stick a Sawzall in the hitch receiver and split square tube in half. Air chisel it out and then you can use the hitch.
Excellent vid. I hope we see more!
Loving these videos!!! Would love to see you do a budget turbo... maybe a 2LT setup on the 3L.. If you do include good video of how to up the fuel and EGT gauge setup.
Good to see you guys using reduction gears!
A nice budget helper here in the states for the braided brake line is boat trailer brake lines. They come all kinds of lengths and are very affordable. You will have to re-flare you hard lines, but for $15 for 2 foot lines are worth it. Done it on a few budget projects and have lasted years of trail abuse. And they’re sold almost everywhere!
@mikerasmussen7993
2 жыл бұрын
This really helps me in the near future 👍
Very impressed with the Pony's capabilties! Wonder when you'll do some DIY panel work to knock out those dents....
Here is a easy mod, that hitch you cut off use a electric metal saw and cut in to the corners then use a air hammer and I bet it comes out then you can install a recovery point! I have done this many times at my work for customers.
Great Vid guys 👍
Very niCe and good to have a friend and friends that are mech like minded keep it up 💯
I love the pony. I wanna get a Toyota pickup to build so bad haha. I used to have a 1991 Toyota pickup I hated to rid of it but the frame and body got too rough and ended up junking it. It had 287,000 miles on it an still ran great. Had a small lift with 31" tires with rims like yours but mine was white instead of being black.
Love the rigs guys. I got an 03 td and I’m hooked go the hilux
definitely redrill the spring perch’s on the front end to give it a better approach angle 🤘🏽
Just love the pony Extra width is perfect!
It’s great video, congrats and you are getting more comfortable in front of the camera
The music when they were doing the front end is from fs19
Idgaf How good of parts deals you get jock the haters are always gunna hate i guess its good to have mates in the know. That was a Good video guys
To get that tow hitch box section out now you have cut it, just weld the inside of the box section that’s seized which will shrink the whole box section and also heat it. It should easily tap out then.
love a lil bump on the weekends!!!
On the ifs hub swap, in the US we lathe down the outside of the wheel mounting surfaces till a Toyota Tacoma brake rotor slips right over. Then you use toyota Matrix wheel lugs, and the rotor is now floating.
Thanks mate for the video
3:40 love the Burt Munro reference
Definitely need to put the Jock and the pony VS Shaun and Darryl at Wheeny Creek! Happy to join and have a blast in my quey aswell with you fellas if you read this as Wheenys my local 👌🏽
Wowsers that warp stabilizer during the crawl comparison was a trip
I JUST LOVE THAT SERIES!
Jocko has taken this to a whole new level. Shaun when are you going to do something to Darryl. Mabye some lockers and his own set of tyres instead of stealing them from Sooty. Thanks for the awesome content legends
If you´re gonna do bar work, judging on previous events, cheap addition - maybe fit a couple of rollover bars coming off the sliders. Might save the roof/windscreen etc. in future!
Jocko. It's so refreshing to see you putting well deserved work into the Pony . It's about d--n time big man .LOL . You may actually keep up with Graham's Isuzu now . LOL . Cut fender arches and put on flares . You can hear the tires rubbing hard .
everytime i watch your vidoes it puts a smile on my face keep it up 4wd 247
Truck yeah! Budget rigs lookin shmick 👌
The pony’s coming up awesome 👍👍
Just seen you guys out at hawks nest, can’t wait for the vid 😝
I love watching this build...
The Pony Lux is just like my 92 4x4 dual cab Mitsub Triton (manual petrol 4cyl) :P Under 5k in total for vehicle, rego and some mods = unstoppable
Great show
Awesome video, best car in the word
Pretty much everything you did to your rig. 👌
Would love to see a full diff/transmission breather kit installed amongst your next mods to keep the water out of all that fine work you guys have just done! Whats involved ? what to look for in a good kit etc... Also would love to see the Pony up against Shaunos new 200 series as well at some point too!!
@jocko4wd281
3 жыл бұрын
The diffs have breathers but not the transfer or gearbox. Definitely on the list!
my fj61 12ht crawls like a beast just like yours and its full stick with 31’s the talk is amazing so is yours now!!
Jock is a Legend in his own mind! LOL! Keep growing that red beard out and soon you will be a member of the DESEL BROTHERS! LOL! Great work! Keep up the mods and you'll soon have a 4WD that no girl in Australia will ever want to be seen it! Cheers and be safe down under! o,o
Gday 24/7 .My mate matt saw you at the Long Flat Pub reckons you lot are awesome. I hear you don’t need an off sider lol. He won’t stop telling me about the camp site
Not a bad effort, definitely a decent upgrade to assist the little pony in getting the job done 👍
I think you can cut the rest of the tubing out of the receiver hitch just by taking the the blade out of a hack saw sticking it through and connecting it back to the handle.
Love tuning in to "Jock and Matt's Luxy Adventures"
bar work and some winch recovery points
I, just earlier this summer, wanted to remove the ball hitch from my truck that had been on the truck since 2006 (rust belt USA). I had to remove the entire hitch from my truck and enlist a 20ton shop press to get the ball hitch pressed out. 4ton power pack had no effect. Just saw yours is hollow, mine is solid forging. Probably different removal process anyway here.
G you made it so much better
Rears up front conversions best thing I ever did with mine ln65
jocko is the man, man
It looks like a hole new truck,sick mate
Hey Jocko. Just a suggestion to help remove the old hitch from your towbar, a coal chisel and lump hammer might help to shrink it and allow you to ultimately get it out.
Interested to know what power mods you will do for the NA motor. What will you do for power mods Jocko?!! Exhuast system/ tune/bigger intake or highflow filter ??.