10 SECOND TOW TRUCK, RACE TRUCK, AND DAILY DRIVER - THE QUAD CAB
Автокөліктер мен көлік құралдары
Full feature on my personal 04.5 truck known as "The Quad Cab"
Parts List:
D&J Enforcer Deckplate 6.7L Longblock
Exergy 275% over injectors and 14mm Race Pump
Firepunk Comp 3 Transmission
Diesel Performance Converters Billet Triple Disc Converter
Firepunk Anteater Pro Transmission Controller with tap shifter
PSC Hydraulic Assist Steering
American Force 22x12 wheels and 33x12.5 Toyo AT/2 Tires
Airdog 4G pumps X2
5"X.120 wall 1 piece aluminum driveshaft with 1550 joints by Columbus Joint and Clutch
Пікірлер: 203
Guy has a diesel that many are envious of and still remains humble and down to earth with his build. Take note. This is how business owners should operate. Beautiful build and good luck!
The Miller brothers and Firepunk crew are a phenomenal group of folks. Every time they make the trip over to Rudy’s spring and fall ODSS events I make a point to speak and they treat me like we’ve been buddies for years.
“The tailgate fell off from a pothole in VA” Our roads aren’t THAT bad....oh, wait. Yes, they are.
@johndoe-ly8jt
4 жыл бұрын
If you think your roads are bad then come to Michigan lol.
This has always been my favorite 3rd gen, ever since I saw it on the Diesel power challenge
@jordangress236
4 жыл бұрын
I know this is late but that grey 3rd gen in the back is catching my eye
@sailingseahawk2012
3 жыл бұрын
Same!! Love the Quad Cab!
More diesel owners need to subscribe to this channel! Very informational and also a great sense of humor! Can't wait to come to the shop with my 2nd gen and Dyno it. Keep up the good content!
Dude ur awesome!! So much details!! God bless your shop!
You guys are doing an awesome job with these videos. I’ve watched every single one and i feel i’m learning a little more about diesel performance with each one that’s posted. Keep them coming guys! 🤙🏻
Perfect video. More like this would be great. Informative, in depth, everything explained.
Loved to see a video like this covering all the employees trucks!
Nice video all your hard work and dedication came out in that vid. It truly shows the pride you take in it.
Beautiful truck and awesome walkaround!
Awesome video ! I really like your shop 👌🏻 this 3rd gen is absolutely badass 😈💪🏻
Definitely a great video. Guys definitely know their stuff!
Kudos on the walk around your a straight shooter ,and you have a very nice truck something to be proud of Thanks for showing us your truck
The fact that you're so transparent with your customers and fans is great
Awesome video. I remember seeing you in CF years ago. Great guy, keep doing what u do
Thanks for setting the bar lavon!
Keep posting daily great content!
Love that truck! I hope in time I can get my 06 to this level. 👍🏼
Yesssssss!!!!!! Awesome!!!!! Thanks y’all! Man I love this truck!!!
Awesome video as always, such a bad ass shop with a great passionate group of guys. 👍👍
Cool, down to earth shop. Love that he still puts the customer first, that seems rare with a shop growing as fast as Lavon's.
I enjoyed watching this truck two years at diesel power challenge.... Respect to you and the team Sir Miller!!!
Wow that trucks beautiful. Really cool video. I have a black 03 I've been slowly going threw. Trans is all that's holding me back now.
I really cant tell enough people how amazing you guys are to deal with and how lucky I am to be local to you guys. absolutely the best customer service I have ever had.
It’s been 6 years since the DPC? That’s crazy. I remember always watching it every year and that’s honestly how I heard about you guys. Always thought it was crazy such a big name in the diesel industry is in the same town my grandparents live in haha
My favorite truck!!
Really enjoying these videos guys good job keep it up
And this is exactly why people love Firepunk!
Having a third GEN that you can work and play with is so awesome!!! Thanks for sharing...
This is literally my dream truck
My favorite truck ever. Built to the gills but still so useable awesome truck
YOU ARE AWESOME!!!!!!!!!!!!, FROM ARGENTINA LEARNING FROM YOU
Brilliant philosophy for a company I got more interested in the desiel tuning from the likes of you guy's and seeing the ultimate desiel challenge I'm from the UK and it's been interesting learning from multiple channels how we could tune some of the engine's we have that knowone does anything with because we've only got a small tuning scene for them, keep up the great work
The best all around street diesel I’ve ever seen built. No corners cut and the fact you drive it 20k a year is impressive as hell.
Beautiful build brother🍻🇺🇸
Love this truck!
I LOVE that truck!!!!!😍😍
That is the coolest truck in the world!
Great video !! Guys reading these comments I run a comp 3 from Firepunk in my truck. It’s been the best transmission I’ve had in any of my trucks. If you’re in the market for a transmission look no further.
Lavon you are great can't wait to talk to you again in the future.
Looks impressive
Awesome truck…
Awesome vid Lavon and Co. you gotta get mom back in another video!
Lavon is one of my idols I love diesels and to me he is one of the most successful people in the car community
I had a Golden Nugget in my last truck. It was perfect. I had a lot of friends who tried to save a few bucks and go different routes with their transmissions and they always seemed to have trouble. Mine was flawless. I will be a customer for life. Current truck is a 6 speed otherwise it would have a FirePunk transmission in it no questions asked. I had a line blow that was made at O'Reillys. The fitting blew off. We didn't know what happened Took the truck up to FirePunk and they diagnosed the problem and fixed it for basically free. Awesome guys and an awesome product. I wish every business I dealt with operated with as much integrity and with absolutely no greed lke these guys. They are great to work with and very very trustworthy. Nothing but good things to say. Humble is an understatement.
This truck is my dream truck
That acceleration at the beginning 😍😍
@peteharder6325
4 жыл бұрын
That's wheel spin...
For what its worth, I dont post much so these guys made a life long customer/friend out of me. I had my 05 cummins trans grenade after a shop threw in a bad u join for my drive shaft. Bought a comp stage 2 and installed it with a new correct U joint. Well that previous one hosed my drive shaft yolk so needless to say this one failed again and corkscrewed the back end of the new Firepunk trans. I gave Firepunk a call and told them my story, they overnight'd me a new overdrive cover no questions asked. On my way home I stopped by Firepunk for my 1k service and paid for the part and waited for the service. This family couldnt have been nicer. Sitting on a comfy couch waiting, they offered me coffee and I got to talk to Lavon about trucks and he gave me a tour of the shop, the builds, and the trucks. These guys are the real deal. Best trans and tuning ever and very accommodating to teaching and questions. Buy Firepunk! They got me out of a tough jam when I was home on leave after training and got me back on the road fast!
Love this truck my neighbors have one just like this just all stock, they use it to tow their horse trailer with.
All I can say is sick
You guys should start a transmission rebuild class up. I like doing everything myself. I have rebuilt 2 47re and 1 48re. I would love to know more about the valve bodies.
Perfection. I'm a Duramax guy at heart, but I'm jealous haha. Nice truck man!
Just sold my LB7 got tired of all the problem coming up on truck now I’m really thinking I want to get a Cummins after discovering this channel. Thank you
@tokeypokey
4 жыл бұрын
well allison is a better and stronger trans. dodge motor is stronger. built motors cost the same unless you cheat some shot peened 12v rods and qsb pistons. duramax will spool big charger setups better.
@cn969777
4 жыл бұрын
Jared those 6.7s can spool some big setups too, and the 48re trans are arguably the best built trans you can go with. Quicker shifts and less rotating mass than an Allison. But I still chose to build my lb7 and I love it. Spools a single s480 very good
Love the truck
Super clean truck lavon!!
@FirepunkDiesel
5 жыл бұрын
Thanks
Here in PA I have to keep my prescription papers on me for my windshield tint it allows 30% tint on my entire windshield but here right next door to you guys in PA the cops are horrible about tint.. its crazy.. so I qwnt and told my eye doctor bright lights give me bad migraines which is true just not all the time. And then he wrote me the prescription for tint haha now I got it on my wife's car and both my 3rd gens haha it makes driving so much nicer and it keeps the heat out a lot better in the summers ☀️ ❤️❤️❤️
Stand up dude👍
What a beast
First time I saw him was on Diesel Power Chanlenge. He dominated the competition
I need that in my life
I love that you didn't change the front end to the late 3rd gen. These are so much better looking in my opinion.
I want you to make me a fuse panel like that. So clean.
Absolutely love your integrity that is more important than anything when I was out in Seattle I work for Boeing and I have a little side gig rebuild and transmissions and a guy bought a turbo 350 from us so he brought one for us to rebuild we rebuilt it in about two years later he calls me his thing don’t work well we cleaned the valve body out with brake cleaner carb cleaner something like I can’t remember I was back in the 90s and I said well let’s see if we can do I went over change the valve body because he left it sitting on the garage floor for two years and I still warranty it so anyway yeah I appreciate your integrity this is Jim with the old 91.5 again Yeah that the turbo 350 went behind a 350 small block Natalie Chevrolet in a 27 Ford pick up his dad bought brand new ha ha that’s pretty neat to have fixed guy up and he was real happy with me you don’t know how many sales at the generated in a few OK hey you keep up what you’re doing I have a nice day bye
Killer video guys, keep it up. -You friendly neighborhood Duramax owner
@irishsavage8715
5 жыл бұрын
#Isuzu
@Blackneck1994
5 жыл бұрын
@@irishsavage8715 1. It was a joint venture, all engines were assembled over here in Ohio anyway. 2. Isuzu makes good diesels 3. For the longest time the best Cummins blocks came from Teksid in Mexico so I hope you don't have an issue with foreign manufacturing.....
Love the video and btw my name is lavon Ivory nice to meet another lavon I'm subscribing to you
I wish i could afford to have you guys build mine. Id love even 600hp.
legendary
I want the exact setup this truck has on my 2018!
Awesome Truck even though its A Dodge and Im A Gm Guy i have A GMC Envoy Denali and A Chevy Z71 Extended Cab Short Bed Both awesome Tow vehicles i don't go All Out i have a 10'×6 flat bed trailer i tow behind my GMC Envoy Denali and a 16'×6 i tow behind my Chevy Z71 i haul a little bit of everything i Actually Got Started Hauling Pallets and Construction Materials For Local Contractors and hauling vehicles for Family and friends now i haul a little bit of everything where ever the money is At alot of the time just helping local people Move furniture and other house hold goods hauling Travel Trailers you name it thanks for sharing your truck and shop keep those wheels spinning
I'm getting ready to put a Eaton locker in the front door of my truck spider gears deciding to chip a little traded the drive shaft for a aluminium 5" 1410 spicer joints and stock front driveshaft. Thinking about doing lockout hubs just cause it improves fuel economy by 6 mpg. Yea a big difference shedding that parasitic drag. Better ways. 😀😁👍
Id like to see your personal review of the 5th gen and how its been doing for you
I want my drive way to look like that parking lot
Got to see this truck at UNOH fucking awsome
I gotta get me one of those
That truck is fast...
When u own it u know what you'll need. 😀
My dream truck I wish mine had all this and a flatbed and a a wheelchair lift on it as well for asi get older my SCI gets worse but I love my 2004 ram 2500 qaud can 120 k original mile one owner. Still have my starter truck a 93 ram 250 Cummins 148 k body is wrecked but engine and axles exc are still in good shape been sitting planned to build a wrangler from the prices.
I'd love to build me a Crew long bed 24v with a FMVB as a project coming from a Ford guy. I'd love to see a 6.0 Powerstroke with a FMVB
The polished sheet on the underside of the hood is awesome ❤❤❤ how did you fasten it to the hood? I might steal your idea but make panels instead that fit inside the empty spots under the hood haha ❤❤❤
I had a PSC system on my 6.0 with a redhead steering gear. I removed the system as it couldn’t make quick adjustments. Any advice?
Where are y'all at? I want you to build my truck. '06 5.9 dually. I wanna go fast and still be able to tow. Literally exactly what I'd like to get out of my truck.
Love that truck!! My 03 quad cab is a compund built up sum want to get dynoed and tuned by firepunk. Also need advice on injection pump want to stay single stroked pump but what is the best most reliable for my aplication
I bought Lynwoods 03 back in 2010 , always wondered why you didn't use his truck for this build. Same truck I think ?
If you have a second to help out I'd really appreciate it. Every time I mess around and take my truck over 3K rpms I lose coolant. It just blows it out wherever the weakest point is. Otherwise it runs fine daily driving. Did you have to clip your water pump or what to be able to wrap the rpms up like that in the video intro?
Lavon and company what do you guys think about the mystery switch debating on doing trans as been built
How do you feel a torsen limited slip would work in the front end vs a clutch-type? I’ve had Auburn’s in both ends of a built F150 before and it was a bear in the winter with torque steer.
First from a truckstop
Good video awesome looking truck with all that crazy horsepower and torque do you have a transfer case support in that hot rod
@FirepunkDiesel
5 жыл бұрын
No sir, good ujoints and a balanced driveshaft are all you need to keep the overdrive section from developing hairline cracks
Do you drive it in the winter though? Pretty clean truck
Great truck! Great and resourceful ppl to work with. Are you still tuning it with UDC?
@FirepunkDiesel
4 жыл бұрын
Tuning this with HPtuners, but yes still do UDC tuning
Did he mention the converter stall he runs?
I hv 2015 Ram 5500 which I use for high shot work. What do you suggest for more power to my rig to keep it running strong but reliable.
What is the 2015 shaft that had problems?
I’ve got an 03 and I’d like to put more power to it. Just had a transmission built with billet parts but I’m needing injectors and turbo. Would like to stick with stock pump. What would you recommend? I pull 12k camper and 10k trailer often and daily
Wow you remember when you gave me a ride in it. That was pretty fast for me probably not for you lol
@fullsend9857
5 жыл бұрын
You probably remember me as Nathan Hochstetler I helped repaint your office
@FirepunkDiesel
5 жыл бұрын
Yessir, I remember!
And I cant even get my transmission to work right over here.........geez
Where did you get the mirror for under the hood?
Is there a source or article where you can figure out like what steps to take in building hp? Like if I’m going to put a big turbo I’ll need bigger fuel type of thing.
This truck is so clean even living in Ohio. My 07 is starting to rot pretty bad