$10 MTB Upgrade that took my bike from ENTRY LEVEL to the NEXT LEVEL
Тәжірибелік нұсқаулар және стиль
In the world of Shimano derailleurs there exists the basic line, which consists of old favorites like the Tourney, Acura and Altus. Then there's the Entry Level derailleurs starting with the Alivio. My eMTB came equipped with an Alivio derailleur and every ride that's anything above smooth has resulted in a chain drop...and since it's a high torque mid-drive, that often means having to wedge the chain out of a bind between crankset parts. I decided to see if a simple chain guide addition could eliminate the problem....IT WORKS! Even when my choice of chain guides is one that doesn't even fit the bike properly!
Here's the chain guide I have on order - amzn.to/3RRKirn
Here's the under $10 option - amzn.to/4eLIudw
(note: the links above are affiliate links and I may earn a small commission from affiliate links. This doesn't add anything to the price you pay and is a great way to support the channel!)
See Project-E (a work in progress) - • Making a Worthy eMTB |...
What do you think? Do you run a chain guide? Have they made a difference for you? Comment below
for Coupon Codes, Merch, and 🆓 promotions - Check out the links below:
Some links on this page are affiliate links from which KevCentral may earn a commission. Example: as an Amazon Associate I earn from qualifying purchases.
✅ T-Shirts - kevcentral.store
✅ Stickers - www.ebay.com/usr/kevcentralmerch
✅ Bike Parts - www.amazon.com/shop/kevcentral (affiliate)
☑️ Patreon - / kevcentral
☑️ Twitter - / kevcentral
COUPON CODES & DISCOUNTS:
HP printer owner? Use this code for 1-FREE month of Instant Ink for compatible printers: try.hpinstantink.com/rk9qfy
Get $20 off your first month of Visible service using code: 3PLQH6P
redeem at www.visible.com
$5 off at Boston Scally Company - bit.ly/BostonScally5off
Some links on this page are affiliate links from which KevCentral may earn. For example: as an amazon affiliate I may earn from purchases using links. Affiliate links don't cost you anything extra and are a great way to support the channel.
Пікірлер: 46
You could probably modify an old front derailleur to act as a chain guide on a 1x system. A bit of bending and perhaps an additional screw somewhere else and you can probably get it to do that job. There seems to have been lots of different designs of chain guides over the years and they all seem to work. It only has to stop the chain lifting from the teeth and falling to the side.
Very good points. Thanks for sharing this with us.
The N-Gear Jump Stop has saved me a world of headaches over the years. I've had a couple of bikes that I swear were allergic to their own chains that the Jump Stop fixed.
EXCELLENT as always Kev.
Good choice on a chain guide,Kev. I have one on an mtb which I converted to a 1x,similar to yours.
I had the same issue with my bafang mid drive. Even with a clutched derailleur and a narrow wide chainring. What finally got me to figure it out was the same, 5 minutes of trying to yank the chain out from the inside against the motor haha. Designed and 3d printed a nice guide and haven't had a single issue since!
@KevCentral
13 күн бұрын
Thanks for sharing
You're going to love the advent x.. Ive used chain guides and they work really well
@KevCentral
13 күн бұрын
I’ve been running Advent 9/X groupsets for a few years. Good stuff
First time I went 1x I was getting a bunch of chain drops since I have a 3d printer I printed one and it saved me so many times.
Yes, chain guides for most of my builds.
Been losing the chain off the chain ring on my stock ledge x2 slot lately. Great idea gonna give it a ry
I just upgraded the rear derailleur on my 2013 Mongoose Switchback Expert mountain bike with that same Alivio rear derailleur. Alivio RD-M3100 SGS. The bike came with an Altus M310 medium cage derailleur and it didn't work right with the Sunrace CSM680 11-40T 8 speed wide range cassette I upgraded to from the original Sunrace CSM66 11-32T 8 speed cassette that came with the bike. I also did a cockpit upgrade back around 2020 to a Truvativ Hussfelt 40MM stem and Truvativ Hussfelt Comp riser bars and swapped the plastic flat pedals for aluminum flat pedals with removable studs. Last thing I did was put new CST Rock Hawk 26x2.25 tires on it last year. It doesn't look like a 2013 anymore. I got the bike new off of Amazon back around 2016-17.
@KevCentral
13 күн бұрын
Nothing wrong with an Alivio. On my eMTB it has two factors causing problems for it: 1) it’s getting battered by a bike 25lbs heavier than a standard bike 2) Everything is happening at faster speeds (20mph, even up hill)
Good to know. 👍
i've had absolutely no luck with chain guides. I bought one that strapped to the chainstay with zip ties, but when i shifted to a lower gear the tension of the chain ended up snapping both zip ties from the chain guide. I then bought a chain guide like you showed (MUQZI Branded) in this video and the guide part screwed into the seat tube clamp, well the bolt connecting the guide to the clamp ended up making its way loose and the chain guide fell off somewhere along my ride and I never found it.
Before I removed my front derailuer from trek I used the front mech as a guide and my trek is 1x8
My friend said drivetrains don’t matter as much on an ebike. This shows a better drivetrain is still desirable.
Nice
I automatically like all KevCentral vids. Great channel!
@blipco5
13 күн бұрын
KC vids put you in mellow-land. 👍
More videos on the G1 😁😁😁😁
Most other companies streamline their product offerings between 3 SKUs for "Good", "Better", "Best". Shimano: hold my sake
@KevCentral
11 күн бұрын
😂
A good portion of the cheap walmart bikes with a 1x have the front sprocket completely covered by a plastic chain guide/guard. I see that and I wonder why those aren't put to use like this.
Can you test suspension forks from Temu?
TL;DW An inexpensive seatpost mounted chain guide will allow you to run much harder trails without dropping the chain or having to buy a new derailleur
The non clutch derailleurs shift easier too.
Looks like you could probably 3D print one of their chain guides too.
i have a 7 speed shimano that falls off chain ring if bike is moved backwards. does it need lubricated better? so annoying.🍻
That part came on a cheapo walmart bike (it was 1x) I bought 5 years ago 😄
@KevCentral
13 күн бұрын
That one came off a non-big box hyper. A $1700 carbon bike, but yeah…same guide just with a different falcon model on it
Would upgrading the chainring to a better narrow-wide chain ring be a good fix?
@KevCentral
13 күн бұрын
Wouldn’t make a difference I don’t think
@storm3016
12 күн бұрын
@@KevCentral It did fix the problem for me. Even with a cheap IXF crankset (the original stamped chainring was welded to the crank so had to replace everything) I have no more chaindrops and could finally remove the chainguide. I also use an Alivio btw.
@johncarrington8612
12 күн бұрын
Seth did a video on using a narrow wide, it made a huge difference. He turned off the clutch on a derailleur and did not drop a chain when riding real rough terrain using a narrow wide chainring.
When you can't find a crowbar grab a stick!
Yappi
they just restricted them to parking lots at my local park, the electrics were hitting trees and hikers, lots of law suits so the police had to stem in and regulate the crazies, LOL
@niteshades_promise
11 күн бұрын
U.S. federal law: if bicycles are allowed, gas and electric bikes are allowed on the trail. 🍻
Holy crap! 4 commercials!
@KevCentral
13 күн бұрын
Wow! 😮
@The_Algorithm_
13 күн бұрын
I forget there are commercials on KZread. 😂 I've had premium for years. Great video though!
That chainring looks like a narrow/wide but the chain is sitting on it wrong....
Put her on a diet and upgrade the tires 👍
Can’t believe I watched all that garbage about derailleurs to get to a chain guide. 🙈