You'll get there soon Nick keep up the great work 👍

Congratulations and well done on getting to this point where you're able to work with these people. You've put so much work into your channel, it's well deserved mate! :)

@NBundyElectrical

26 күн бұрын

Thank you so much dude

Looking forward to the video with that KZreadr you alluded to at the end. Double check any 'contract' he tries to give you though 😉

@IanFarquharson2

26 күн бұрын

Double duct the shed? So you can pull dc, and ac+data to it. It’s only big enough for 2 panels so if the inverter and batteries end up out there you can get the juice off the roof and back again once it’s made wiggly.

Wonder how sick their house is gonna be with a few million followers 🤯🤑 Fingers crossed for some awesome content 🙌

Nick you have done great with your you tube channel we have watched you take on an apprentice, which you mentored and you must be so proud what Adam has achieved and has now went out on his own. But remember us commoners before you get embroiled with the tick tockers and the rich and famous...One last question, who is Matt Armstrong... keep the videos coming.

@Toneightydarts

25 күн бұрын

The best Crashed car rebuilder on KZread. Buys the crash damaged like rolls Royce, McLaren, Lamborghini etc and repairs them. Definitely worth a watch mate

Seem to be buzzing mate. Good to see. all sounds positive

@NBundyElectrical

26 күн бұрын

Thanks dude 👍

Might be worth running a cat6 cable or 16mm ev ultra out to that shed for the future solar so they can connect the ct clamps back up at the meter.

@TheWr4ith

24 күн бұрын

Is there still a limit on how many panels you can fit to residential property, before it is classed as commercial? Always found that frustrating as you cannot always maximise the area you have.

Nick love watching your videos mate and I love your drive and ambition I wish you all the success I would get half as successful as you. I’ve learnt a lot from you for the business side of things just not as good on the camera haha. Can’t wait to see more content

@NBundyElectrical

25 күн бұрын

If you stick your face in front of a camera enough times like I did at the beginning mate, you just get used to it, I promise Hundred percent with a shot dude, what have you got to lose?

Oh. You have done your mez

11:55 - I reckon it's Max Fosh. He's hilarious, can't wait to see the collab!

what your doing vid wise is bril! unit/vlog/stuff... it just works! 😊

@NBundyElectrical

26 күн бұрын

thanks dude appreciate it

So far the jokes have been tasteful, when they're no longer tasteful that's when you need to stop. The vacuum was funny!

@chrismobbs

25 күн бұрын

😂😂

@adamwenham6746

25 күн бұрын

And the benchmark for tasteful is when it crosses your line of not funny 🤔?

Nick will be in Hollywood next year😊

I sussed out who the youtuber you alluded to at the end as I'm his follower too. It's Mac Fosh. The numbers of followers and videos match 😅

The best thing for any channel is change; mixing it up always gives it a fresh look, like a shaven ape. (no intent meant)

Congratulations nick your doing something am into moterbikes keep up the good work lad looking forward to the moterbikes videos 💯

@NBundyElectrical

23 күн бұрын

Thanks mate 🙌

@UuelHempkin-qh4jf

23 күн бұрын

@@NBundyElectrical anytime lad

The Milwaukee multi tool takes the Bosch blades

Aw yiss I'm special.

Can i ask where can i get a similar floor cover whatnyou kneel on. I drill out of houses on a regular woould be great to jave something similar

Have a pint of lager and packet of crisps with Will.

Don’t know if I’ve missed a video I know you was a Bosch what made you move over to Milwaukee?

Milwaukee could have given you the packout vac and you could take it on the bike with you! I have that vac though, use it for the car and it's very good.

@NBundyElectrical

25 күн бұрын

This is the one I asked for but didn't realise it wasn't the packout version lol

@georgemcclelland5207

25 күн бұрын

@@NBundyElectrical I did the same thing asking for it as a present for Christmas!

Customer wanting CAT8 is complete overkill, plus more expensive. CAT6a will be perfect.

@NBundyElectrical

23 күн бұрын

No mate, they do want cat six. I just wrote it down wrong or couldn’t read my writing. 😂😂

❤

Working for Jess and Mike miller 😂😂😂 ifykyk

@NBundyElectrical

25 күн бұрын

😂😂😂😂

@jordanm5674

24 күн бұрын

👀

wouldn't mess with adam's dad mate looks hard af

@NBundyElectrical

26 күн бұрын

I’m currently in hiding

@Chrissykes78

26 күн бұрын

@@NBundyElectrical I was convinced you were Adam's dad

@jocramkrispy305

25 күн бұрын

It's not Adam's dad he messes with

@NBundyElectrical

25 күн бұрын

@@Chrissykes78 honestly?

@Chrissykes78

25 күн бұрын

@@NBundyElectrical No you aren't old enough I was just joking mate, keep up the brilliant content :)

How long have you been off biking, that's a big bike to get back on

@NBundyElectrical

26 күн бұрын

been off for 7-8 years mate

Cat8? Have fun. That stuff is impossible to work with. I assume it was a miswrite. Hahaha 😜

@NBundyElectrical

25 күн бұрын

An unfortunate mistype on my part

Do Milwaukee and Bosch use different oscillating tool blades? I'm so used to buying Universal blades that I don't even pay attention anymore... Actually, on second thought, there are closed and open ended blades, aren't there? Maybe that's it. Probably answered my own question. 😂

@roycesmart8019

25 күн бұрын

Yes and no you can use the old style blades and starlock blades with the Milwaukee

@rayc1503

25 күн бұрын

​@roycesmart8019 Starlock is all I purchase for my Milwaukee multitool. Are there any cheaper alternatives?

@roycesmart8019

24 күн бұрын

@@rayc1503 the style with the cutout on top

Max fosh incoming

Fellas. That is not 5 inches 😂

Be careful going to quotes on your bike if you don't have Business Use on your insurance. Commuting doesn't cover it either.

@NBundyElectrical

25 күн бұрын

Thanks mate and yeah, I’ve took out full business and personal use on the bike

I removed one of your jobs yesterday.... 25mm flexicon. I stuffed 3 more circuits in the 32mm flexicon we replaced it with :) It was appropriate for the job :) up the back of a black downpipe, solar, 3x Aircon circuts in 2.5.and a cat 5 for the ct ;)

@johndoe2769

26 күн бұрын

Cool story bro. needs more dragons though

@TheChipmunk2008

26 күн бұрын

@@johndoe2769 shit, forgot the dragons, should've used 40mm

Vlog. Like blog. Like clog.

Why not duplicate your video equipment so both vehicles and your premises are equipped and negate the "I forgot" situation : )

Just like you Nick 5 inches😂😅😊😂😅😊

Did a poor job at hiding max fosh 😂

@NBundyElectrical

25 күн бұрын

Never heard of him, mate

@Vii7aL

25 күн бұрын

@@NBundyElectrical if you don't do a Max fosh style prank on him you've missed out on a trick and probably a lot of views

Nick, it's a vacuum, not a hoover 😂

@Ivorbiggin

25 күн бұрын

Correct a Hoover is a trade name its like saying Mega instead IR tester

Yip.....mum jokes ,, past their ,sell by. date 😢

@NBundyElectrical

26 күн бұрын

They will never get old mate 😂