$10,000 rc car
🎓Kev's eBay Secrets - 11 steps to being your own boss kevtalbot.clickfunnels.com/sq...
Get Car & Upgrades here:
www.primalrc.com/
www.taylorrc.co.uk/
Get Your Merch Here teespring.com/stores/kevs-merch
🧡My instagram / talbotkev
💙My Facebook page / kevintalbotvideos
💡Check out my Business Channel: / @kevtalbot5356
🎥My LIVE Stream Channel - / @kevintalbotrc
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#Kevintalbot #rccars #rc
Пікірлер: 1 100
Kev's eBay Secrets - 11 steps to being your own boss kevtalbot.clickfunnels.com/squeeze-page31158442
@lyleallyssanashookpuk3636
Жыл бұрын
I need to try this👌
@The_ace_1
Жыл бұрын
Another good video kev👍🏻
@Michael-nw2gm
Жыл бұрын
Can you like this comment? It would mean a lot ,hello from USA
@robertoscarsella7600
Жыл бұрын
Thank you Kevin!
@NickKautz
Жыл бұрын
The wheels were spinning too fast when it landed with nearly no forward momentum, which sent massive torque through the drivetrain as they're forced to stop instantly.
The way you take our hobby seriously, but not too seriously is why this is my favorite channel!
@snowrunnerstuff349
Жыл бұрын
me to
@mam362
Ай бұрын
When you don't have to pay for anything out of pocket it makes it easier to not be so serious
5 Mill subs send the Huracan to the moon
@KevinTalbotTV
Жыл бұрын
5 mill this year ill do it
@joshpatch8233
Жыл бұрын
Hhahahaha
@rubenterhark108
Жыл бұрын
@@KevinTalbotTV total carnage👌
@konakid548
Жыл бұрын
CARNAGE
@sikegod1240
Жыл бұрын
Maybe 100mil
I loved when you made the comment "your not supposed to hit bearings with a hammer!". And your answer to it was perfect, "don't worry, it's just a toy". Thank you for putting everything into proper perspective. You are great to watch, thank you.
@mikecabardo
Жыл бұрын
Yeah, these “toys” often make grown men cry. 😭😂
@avlehtine
Жыл бұрын
It's not like hitting the outer race is likely to do a lot of damage in this case, but this is also pretty much an ideal situation to put the bearings in a freezer for a couple of hours and then use a vise and some sockets to push it in (if it doesn't just drop in after the freezing).
Quite satisfying watching you rebuild the transmission
Those landings where so clean. Shock setup is brilliant
@muskokamike127
Жыл бұрын
To balance it I'd get softer rate springs but distribute the load over each of the two shocks.
@zane_meek7736
Жыл бұрын
almost like he owns and drives a real monster truck
@TheNewb187
Жыл бұрын
except the one in the beginning when he pulled it out of the van and it landed on the front left wheel in a way that looked like something was going to break.....solid build.
Hello Kevin, I am Roberto, yuor italian fan. I'm 46 and my family and I love so much to watch your videos. I really want to change my Life as much as you did and you are doing with eBay. I'm so tired to do my job as I work in a supermarket and everytime I come home I think how to do to change my situation. You are what I want to be for me and my family.
@KevinTalbotTV
Жыл бұрын
go for it dude!!
@robertoscarsella7600
Жыл бұрын
Please, show me the direction, do I have to do your eBay course? Thank you so much Kevin!!!
@KevinTalbotTV
Жыл бұрын
you dont have to do my course but it will help you
mind blown with that bearing removing trick, awesome
I see you put double sealed bearings in the gearbox, try leaving the inner seals off so grease/oil can get in and keep them lubed. Also it might be an idea to upgrade the high load bearings from deep groove to roller bearings so they can handle the power.
Using a gel ear plug to remove a blind bearing is utter genius. 👏👏👏
@ethancowan2441
Жыл бұрын
Agreed.
@yesterdayschunda1760
Жыл бұрын
Never buying a bearing puller again, Kevins a genius for that one
@duncanteunisse9700
Жыл бұрын
I always use bread for it.really old trick
@tomb816
Жыл бұрын
It's called hydraulic pressure.
@maxmoritz5065
Жыл бұрын
Its Not Genius its common
Always impressed with Kevin’s mechanic skills. 🔧
That raminators an absolute Beast it's got to be quite a spectacle to see it launch like that in real life I remember the first time I seen a x maxx launching up into the air and it was just astonishing to see this would just blow my mind I'm sure
I like your video's of mahem and destruction. But I like the ones where you fix stuff even more. I am already proud of myself for just building a simple Tamiya. Your builds are awesome.
That old pilot bearing trick works every time.
Those shocks are amazing job well done Kevin
Seeing the ram on the workbench really put into prospective the size of it wow its massive..and looks like kevs got the suspension dialled in now nice 👍
Love your videos! What I think would be a cool video idea is making a body shell for your $10,000 rc car that looks like your monster truck that you have in real life
Kevin wow, I have not seen anyone else do that ( pressurizing the bearing )since I had to do that in 1990. I was rebuilding my Chevy S-10 engine. That is for sure a deep cut trick! Love it…
I can appreciate the quality of this build!
finally, a longer video!
Kev, it really is impressive how much knowledge you've gained over the years. Love watching your content, I don't quite have the budget you do ;) but even as an older gent I've learned to appreciate the hobby. One of the added benefits, my dogs absolutely love chasing my car around the yard. It really gets them needed exercise.
@rickrussell
Жыл бұрын
Do what I do, go follow your car around too and YOU can get needed exercise!
Always love Kev's videos,his fearless tweaks,upgrades and rebuilds are always interesting.
That was a lot of fun to watch. I just love looking at all those machined parts. I think someone needs to tell the good folk at Raminator, and possibly any aftermarket parts makers, to put small radiuses everywhere there is a sharp corner on their shafts and driveline components. Maybe dial it back a notch on hardening processes too. Maybe then things won't snap as much. It's quite the engineering challenge to make something that big and heavy be durable as well.
Think I'd pop those bearing seals for good and let the oil in the transmission lubricate them continuously. Love the trick to get the bearing out of the blind hole, never seen that before. I'd have been there forever using heat/reverse pliers.
Wow!!! I'm shocked on how smooth that beast lands now, with that upgrade! Thanks for another Great video 🙂
Awesome tech tip for getting that bearing out Kev!
Hey kev! I use the trick you did with the silicone ear plugs a lot, but I typically use bread, and wet it. It’s messy but it works every time!
Awesome kev, the suspension is looking really good now. I really liked the tips for pushing that bearing out.
@mickenoss
Жыл бұрын
Old school method was to use bread - ahh technology eh. =)
Nobody does it like you!!! Love everything you do!
@KevinTalbotTV
Жыл бұрын
thanks bro appreciate it
3:35 Kev taking advantage of physics!
I loved that you showcased your dewalts, grabbed one tried it didn’t work threw it in the garbage then went for a 12volt Milwaukee. Best thing ever mate. Milwaukee all the way, out beats any 18 or 20 volt dewalt makita or ridgid!
3:50 glad to see that worked. I read that bread works too. I had to do the same for a router I have but there was an edge underneath and I was able to get a tiny puller in that I have.
@Blaquer17
Жыл бұрын
Bread works great- used it to get a pilot bearing out of the end of a crankshaft. The other readily available substance is bar soap.
That silicone bearing removal tip was awesome. Not sure if I will ever use it but, i would of never thought it could be done like that.
@brettjones9943
9 ай бұрын
bread does same
We need to see more of Max's stuff. His Xmaxx did not disappoint with those massive jumps
@ST-tf7cs
Жыл бұрын
Yeah I’d agree , start a channel so he can help pay for all these cars he’s launches into oblivion fun to watch
This size of scale is so awesome to work in, you get to use power tools, and you get more room to work in and don't need a massive workspace
I was deeply impressed when you pulled out the bearing with the silicone earplug method. chapeau.
I wish I knew that trick for the bearing before! Great video :D
Biggest Raminator Air FOR SURE!! 🚀 I Think Thunder RC went biggest before this one, now this is the highest for sure Kev Kudos to you for that Suspension setup... You nailed it with drilling out the pistons a bit and only one set of springs😍😍😎👍 See ya round brother
@KevinTalbotTV
Жыл бұрын
thanks bro! yeah she lands good now!
Bro that barring removal trick was awesome!!
The balance of that thing is unreal jumps perfect
I've never liked how bouncy those trucks are which is why Ive never wanted one, but that shock upgrade made a huge difference, looks decent when landing. The other thing is, you better have some money cause that damn thing is expensive! Great job on the shock upgrade that's the 1st time I've seem anyone do that!
Personally, I feel kind of wary about the way the transmission on that only uses grease. I probably would have sealed it with gasket maker and filled it with gear oil. The grease does seem to hold up fine though.
Cool jump!! Great landing! Glad it was not badly damaged.
Kev has become quite the RC expert. Phenomenal video Kev, nice landings! That thing has some plush suspension now!
The Raminator sure is one sweet truck, love it 😀
That dual shock set up was amazing.
This truck is awesome Kevin your a mechanical genius
Excellent call with the double shocks.
Soooo good.. You could tell how loud it was by how quiet kev was hahaha
You are the best Kevin !
Kevin Talbot is brilliant his videos are always fun.
Good one Kev, neat bearing trick👍🏻
That is the coolest RC car I've ever seen
Max needs a KZread I’m definitely subscribing when he starts
Good on ya Kev, never fails to make me smile.
Awesome as hell Talbot !
This is the content we all know and love !
Kev, check out Redline oils suspension fluids. They list CST ratings below 100. I think they're for racecar/dirt bike shocks & forks.
That thing lands perfectly every time, Awsome.
3:25 great teacher Kev! always blessing us!
That landed perfectly with that shock upgrade.
Very satisfying video for those who haven't gotten into RC vehicles yet, or those who want to come out of retirement.
You did a great job Kevin.
have'nt had a truck since my Tmaxx 2.5 and 3.3. Started back in the day of the RC10GT! Man have they come a long way! now I want a new one! Great video bud! Also I think what killed it was him revving it before landing... MASSIVE stress on tranny.
Would love to see a channel from max keep persuading him kev!
2nd shock set really works well. They way that Ram handles now looks more like a Monster Jam real truck.
When changing o-rings in the shocks, don't forget to apply o-ring grease to them. It makes the movement of the shaft butter smooth.
The x-maxx a-arms like to break where the shock attaches. If you replace the captured pins with bolts with nuts it holds up much better. Just have to remove the pin, drill hole all the way thru and then insert bolt
That thing landed so nice for the size of it. If it were me it would have landed upside down and broke everything. Great video
You’re an inspiration to the community. Love your videos!
Great filming shots and angles!
love your content kev thanks for all the rc content
I feel like landing it under power is what caused the break at the end. Too much torque and a surge of resistance caused something to let go.
Kev, You might find you need Nitrile or Viton O rings if you’re using mineral oil. I’m sure it degrades normal rubber pretty quick.
The thing about removing bearings with silicon ear plugs is actually amazing! I will remember that one - Thanks Kev!
@JandJvehicleadventures
8 ай бұрын
Bread works perfectly too
love the suspension on that thing
“Kev you’re not supposed to hit bearings!” Don’t worry, it’s just a $10,000 toy 😎
Have you thought about putting a moped or a small motorcycle muffler on the raminator? Would be an interesting upgrade video😁
Kev!!! That stuck bearing removal fix with the ear plug is brilliant! Thanks dude! Ive watched every one of your videos.
@SVPearler
Жыл бұрын
As a mechanic we used grease for blind bearing removal, same gdog different leg action.
Simply amazing Good Job Well Done!
I died at the DeWalt diss 💀 Edit: if you’ve got nothing else on hand, bread works to pop out bearings as well 💯
Most epic rc jump EVER!!!! Scared me with those slow motion landings thinking something was wrong, just waiting for the gta death music 🤣
Really like all this tinkering! It's a big part of the hobby after all haha
Awesome, if you don't have those ear plugs kicking around bread will also work for getting a bearing like that out
Yess!! This is what we've been waiting for 😜 kev send it to the 🌲😜
After watching you for 3 years now, and starting my own little channel. The biggest thing you've taught me is that, consistency is key! And you are by far the most consistent youtuber on the planet! Thanks for the years of inspiration and entertainment💨💨🏎🚘
@diychad7268
Жыл бұрын
As consistent as he may be, no way is he the most consistent KZreadr on the planet as you put it, there are channels that upload multiple times a day every day every single day, so they would be more consistent, just thot I'd let ya know that making certainty claims such as that isn't wise unless your certain it's true........
@bigboytoyzrc9258
Жыл бұрын
@@diychad7268 You sound like a hater man! I don't subscribe to "every" KZread channel. So "for me" he's the most consistent. I'm just giving props the way I see it, others may see it differently. But I said what I said💯 #MostConsistentRcChannel
@5peciesunkn0wn
Жыл бұрын
@@diychad7268 Posting ten tiktoks a day isn't the same as posting several videos a week with each video taking multiple hours if not days or weeks or months.
Love that silicone bearing extraction trick!
Nice tip on how to get the bearing out using the ear plug Kevin. I didn't know that one. :)
Looks good Kev keep it up 👍
That RAMMER of yours KEV.... IS 'DA-B💣MB!'👍 🤘🇦🇺🤘
Yes he needs to start a channel! I’d sub for sure . The disgust on that ladies face when you fired it up. 😂😂 Didn’t know you could do that with a bearing. Awesome!
Man what a shame it was doing so well absolutely epic
That ladies face after hearing the raminator startup means you’ve done it right! Well done kev
@rustler08
Жыл бұрын
No
That method for removing the bearing is really quite clever
It's so beautiful Kevin!! But in the words of Huey Lewis, "It's just too darn loud". That lil extra goose of the throttle before they touch the ground always breaks sumpin'. 😂👍
I know you love the noise but have you ever thought about putting a muffler on it so you can drive it more places? You could put something between where the muffler connects to bypass the muffler in places that don't care about the extra noise.
IMAGINE THE FAMILIES $10,000 COULD BUY FOID FOR‼️
12:14 I literally joked to myself “What? Get it stuck in a tree?😂”
Hey Kevin your the man!! Keep up the great work mate!!
You never oversell yourself, but you have so many tips and tricks that are so useful 👌