#(1) CNC Electrical Mach 3 Queen Ant SMC5 5 N N controller for Patrons and Subscribers Part 1 of 2
Тәжірибелік нұсқаулар және стиль
A Roger Webb CNC Router machine information Video 883 CNC Electrical Mach 3 Queen Ant SMC5 5 N N controller for Patrons and Subscribers Part 1 of 2
Thank you for watching
Help support my channel and become a Patron www.patreon.com/user?u=15079773
Plans and parts listing available on my Patron pages for the, 3018, MIDI 4040, MAXI 1212, and AMAX 3636 CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe + Mach 3.5 Info
My CARVECO/ArtCAM 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
store-us.carveco.com/collecti...
store-us.carveco.com/?ref=B40...
ezca
Australian Inventors Workshop™ 2024
Produced by Roger Clyde Webb
Experimental and Design Workshops
Sponsored By
Yuyong Industry Global™ QueenAnt PRO V2
SainSMART Genmitsu Global™ PROVerXL 6050 Plus
Thunder Laser Global™ Nova 35 100w CO2 Laser
Carveco/ArtCAM™ CNC CAD/CAM
Autodesk Fusion 360™ CNC CAD/CAM
All rights reserved 2024
Music by Google / KZread Library
The CNC routers I support are
Yuyong Industry QueenAnt PRO V2 Super- Enhanced Global™
yuyongindustry.com/product-ca...
AND
SainSMART Global™ Genmitsu CNC Router PROVerXL 6050 Plus
www.sainsmart.com/products/ge...
I can only recommend as a personal preference the Thunder Laser Nova machine quality
The Lasers I support are Thunder Laser Global™
www.thunderlaser.com/
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.
Пікірлер: 5
I agree with not running in the right direction..
Another vote for spindle turning counter-clockwise, he should check that! Also what about bad bearings in the spindle, could the shaft have excessive up/down play??
Re: aluminium - the patron should check if it cuts with no lateral movement i.e. does it drill with the bit? Secret to aluminium: single flute, up cut, cutting fluid, ramping. I built a large CNC doing this on my Heiz S400, a great machine but nowhere near as beefy as the Queen ant
A stupid doubt. Is the patron's spindle running in the right direction (FWD and not REV) ??
Hi Roger I have bought a Queenant Pro V2 and have a Gecko G540 with Mach 3 could you help with the motor tuning with the 1610 ball screws and Nema 23 345Nm steppers. I am coming from a Open builds OX Belt drive ? Cheers Peter