Looks great! Used your hints in my Porsche 934 Martini project 😀 thanks!
@TheTrueModelling4 жыл бұрын
Wooow NIIICE one! Like Porsche 964!
@bryange104 жыл бұрын
Its very very very beautiful, is my favorit car, greetings from México!!!!
@hirohidetokoro94234 жыл бұрын
Many years no modeling. You let me remember my 80's.
@plamodelstudio
4 жыл бұрын
Hirohide TOKORO I haven’t built long time either. I started modeling just 3 month ago. How about starting again like me mate^^
@hirohidetokoro9423
4 жыл бұрын
@@plamodelstudio I finally understand. The newest kits, the quality of plastic is much higher. Looks pretty sure.
@JHHobby4 жыл бұрын
great built! and nice video~ love it
@miniporscheclub Жыл бұрын
Very nice build.
@coolieee2 жыл бұрын
nice CH bracelet & nice build
@keithsmodelsandrcs65934 жыл бұрын
I have the blue/green valliant kit of this by revell nice👌👍
@StephanieElizabethMann6 ай бұрын
Looks great.
@kevinburt443 жыл бұрын
Lovely work, stunning. I'm a afv builder, but this has got me interested in doing a race car.
@robertsalanon29093 жыл бұрын
Très belle réussite !! Bravo
@chrisgear4 жыл бұрын
Great Work !!!! I build the same car from Revell and i must say in in some parts it is much more detailed than the Tamiya Modell. Especially the Engine and the Decals. But it has no Resina Parts. It is my frist Model since my youth and it is a lot of fun. I watch the real car often at the Nürburgring. I hope that I can build models nearly accurate than you in the Future. Greatings from Germany.
@maximusfbu
3 жыл бұрын
I also have this Revell model and I am looking forward to building it! Are there any metal parts included or just plastic and decals? Grüße aus Deutschland :D
@mundodasminisdeduasrodas2 жыл бұрын
Very good!
@insomniahobbies4 жыл бұрын
I just built the Revell version of this. I'm noticing some major differences between the two. Tamiya did some parts better, and Revell did some parts better.....its crazy how two companies can be so different about the same product.
@plamodelstudio
4 жыл бұрын
Six Sixsix I would like to compare these 2 kits someday near future. Thanks for your comments.
@Echoingencouragement Жыл бұрын
Beautiful video and model. Would love to see some tutorials, maybe another channel.
@markkunikkanen4 жыл бұрын
Lovely build. The Jagermeister livery is one of the greatest. One thing bothers me: I don't know if it's possible, but seemed like You put rear break rotors front and vice versa? The rear has two calipers (main brake and e-brake cals) on a disc rotor and front has only one caliper. Usually it's not possible to mix the two on Tamiya kits, since they're keyed different to fit.
@plamodelstudio
4 жыл бұрын
Markku Nikkanen Thanks for your advice^^
@davidstout4024 жыл бұрын
What make and type of airbrush are you using? Looks very well adjusted and smooth. Great work !!
@plamodelstudio
4 жыл бұрын
I am using infinity and iwata. That I used in the video is Iwata high performance plus HP-CP 0.3mm. I prefer to Iwata because neck of bottle cup is really short so easy to clean after use and also the trigger is very smooth.
@davidstout402
4 жыл бұрын
@@plamodelstudio Thanks ... but I'm confused, why does it say AIRMASTER on the side of the airbrush ... I think?
@user-tj6qj6qo4h Жыл бұрын
Hello! what paint did you paint the body with? May I know the name of the paint?
@beasterbuuny4 жыл бұрын
hello im looking into building a similar kit and i was wondering what paints you used such as the primer, the orange, the silver on the engine block and the clear coat used
@plamodelstudio
4 жыл бұрын
Hi I use #1000 or #1200 Mr. Surfacer by Mr. hobby and lacquer paints by Tamiya.
@cesarignjas4 жыл бұрын
Nice one! well done! I love this car (^_^)
@bowslap4 жыл бұрын
Were the decals included with the kit, or aftermarket? I have a 1/24-scale Heller 934 RSR Turbo kit...
@spencermatthews898
4 жыл бұрын
bowslap the decals are included in the Tamiya kit
@davidvasta2 жыл бұрын
Why did you put carpet in a race car? Wonderful build but carpet?
@stan771604 жыл бұрын
Hello, what paint brand do you use for the orange color? Thank you
@plamodelstudio
4 жыл бұрын
Eric Zon Hi, I used Super Orange gloss of IPP. You can confirm it at www.ippmall.co.kr
@racejunkie5382 жыл бұрын
Do you wedsand the model after painting and before apply the decals and clearcoat ??
@plamodelstudio
2 жыл бұрын
Hi, always thick clear coated after decal then sand it with #2000 to # 8000. And finally Tamiya fine to super compound finished. Thanks^^
@carlosalvarez2434 Жыл бұрын
Hello. Please, can you tell me the measurement between axles? I want to adapt that body to the slot and I would like to find a suitable chassis. I would also like you to tell me the width of the body measured inside, from door to door. Thanks a lot
@ungurdani8346 Жыл бұрын
Salut my friend super car super video subscribe subscribe
Пікірлер: 43
Looks great! Used your hints in my Porsche 934 Martini project 😀 thanks!
Wooow NIIICE one! Like Porsche 964!
Its very very very beautiful, is my favorit car, greetings from México!!!!
Many years no modeling. You let me remember my 80's.
@plamodelstudio
4 жыл бұрын
Hirohide TOKORO I haven’t built long time either. I started modeling just 3 month ago. How about starting again like me mate^^
@hirohidetokoro9423
4 жыл бұрын
@@plamodelstudio I finally understand. The newest kits, the quality of plastic is much higher. Looks pretty sure.
great built! and nice video~ love it
Very nice build.
nice CH bracelet & nice build
I have the blue/green valliant kit of this by revell nice👌👍
Looks great.
Lovely work, stunning. I'm a afv builder, but this has got me interested in doing a race car.
Très belle réussite !! Bravo
Great Work !!!! I build the same car from Revell and i must say in in some parts it is much more detailed than the Tamiya Modell. Especially the Engine and the Decals. But it has no Resina Parts. It is my frist Model since my youth and it is a lot of fun. I watch the real car often at the Nürburgring. I hope that I can build models nearly accurate than you in the Future. Greatings from Germany.
@maximusfbu
3 жыл бұрын
I also have this Revell model and I am looking forward to building it! Are there any metal parts included or just plastic and decals? Grüße aus Deutschland :D
Very good!
I just built the Revell version of this. I'm noticing some major differences between the two. Tamiya did some parts better, and Revell did some parts better.....its crazy how two companies can be so different about the same product.
@plamodelstudio
4 жыл бұрын
Six Sixsix I would like to compare these 2 kits someday near future. Thanks for your comments.
Beautiful video and model. Would love to see some tutorials, maybe another channel.
Lovely build. The Jagermeister livery is one of the greatest. One thing bothers me: I don't know if it's possible, but seemed like You put rear break rotors front and vice versa? The rear has two calipers (main brake and e-brake cals) on a disc rotor and front has only one caliper. Usually it's not possible to mix the two on Tamiya kits, since they're keyed different to fit.
@plamodelstudio
4 жыл бұрын
Markku Nikkanen Thanks for your advice^^
What make and type of airbrush are you using? Looks very well adjusted and smooth. Great work !!
@plamodelstudio
4 жыл бұрын
I am using infinity and iwata. That I used in the video is Iwata high performance plus HP-CP 0.3mm. I prefer to Iwata because neck of bottle cup is really short so easy to clean after use and also the trigger is very smooth.
@davidstout402
4 жыл бұрын
@@plamodelstudio Thanks ... but I'm confused, why does it say AIRMASTER on the side of the airbrush ... I think?
Hello! what paint did you paint the body with? May I know the name of the paint?
hello im looking into building a similar kit and i was wondering what paints you used such as the primer, the orange, the silver on the engine block and the clear coat used
@plamodelstudio
4 жыл бұрын
Hi I use #1000 or #1200 Mr. Surfacer by Mr. hobby and lacquer paints by Tamiya.
Nice one! well done! I love this car (^_^)
Were the decals included with the kit, or aftermarket? I have a 1/24-scale Heller 934 RSR Turbo kit...
@spencermatthews898
4 жыл бұрын
bowslap the decals are included in the Tamiya kit
Why did you put carpet in a race car? Wonderful build but carpet?
Hello, what paint brand do you use for the orange color? Thank you
@plamodelstudio
4 жыл бұрын
Eric Zon Hi, I used Super Orange gloss of IPP. You can confirm it at www.ippmall.co.kr
Do you wedsand the model after painting and before apply the decals and clearcoat ??
@plamodelstudio
2 жыл бұрын
Hi, always thick clear coated after decal then sand it with #2000 to # 8000. And finally Tamiya fine to super compound finished. Thanks^^
Hello. Please, can you tell me the measurement between axles? I want to adapt that body to the slot and I would like to find a suitable chassis. I would also like you to tell me the width of the body measured inside, from door to door. Thanks a lot
Salut my friend super car super video subscribe subscribe
Too much work. Just get the much nicer Exoto