1/144 Revell U-boat VIIC 41 RC Conversion ep.7
Тәжірибелік нұсқаулар және стиль
The next episode will end with painting, All functions test, and final balance work.
00:05 After the failure of the Diver test, I assembled a Plamodel to refresh myself.
00:11 Small submarines are also affected by air bubbles.
I try to make as many air vents as possible.
00:51 I'm going to make an air vent
01:07 air vent
01:22 The rest of the assembly will be finished after coloring.
01:32 Forced the receiver wires in. It looks like there was a crack then. Maybe.
01:57 I used latex gloves.Would a condom be better?
03:12 Test again~
03:37 Pump is not working
03:51 When open it, the pump work. I'm going crazy
03:57 -Is it due to internal pressure in the waterproof space?
-Is the ballast pack under the battery due to battery pressure?
-Is the pump power insufficient?
04:10 Retest with 18350 batteries
04:19 It's working!!!!!!!!!!!!!!!!!!!
04:26 The weight of the battery is causing the stern to sink
04:31 It doesn't matter if it sinks. I'm happy when the pump is running
04:45 What's wrong!
04:49 unresponsive to the magnetic switch
05:12 Replace with toggle switch
06:42 Test again~
06:57 It's working
07:44 There is a gap
09:11 The gap is irritating
09:20 I'll fill the gap
09:47 For car putty
10:48 I don't think the putty effect is enough
Пікірлер: 11
Sand gap (upper deck) flat 1st. Then use strip styrene glued to sanded flat surface. Also use liquid plastic cement it melts everything together. That method won't crack off like puddy and will also reinforce the edges. You can also dip the upper deck with the bow/over hang in hot water with the wire bracing you added in and let it cool and it will hold shape for you. Enjoyed the video, I really like how you added in your frustrations like throwing the magnetic switch. Made me chuckle as I do the same thing when I get frustrations.
Really unbeliveably what you are doing. 👍🏻
Supi supi supi
Love form India ❤️
I am very happy for you. Keep up the awesome work!!
1/35급을 만들라고 생각을 했는데 자꾸 144급을 저도 만들고 싶어지는 이 기분~!!
@tiver21
3 жыл бұрын
작은건 작은것만의 손맛이 있습니다만...아무래도 보관,이동이 수월해서인것도 크죠.
how are you keeping radio signal? as you probably already know 2.4ghz cant penetrate more than a few mms of water so I am interested as to how you are adapting to fix this?
@tiver21
3 жыл бұрын
I did nothing. Maybe it's close. I knew it wouldn't work. You try it, too. I'm going to test it with a depth of 10cm now and 30cm next time.
@airbossone
3 жыл бұрын
Very good job have you done, The Ghz valves penetrate only in fresh water so deep if you use a swimming pool with to much chloride inside - maybe 1 inch or less. Greetings. ps.waves not valves of course
@tiver21
3 жыл бұрын
@@airbossone Aha!!! Thank you for the good information