Wow! That was incredible. You have a engineering mind to think of that idea. If I had some of those foil blanks I’d give it a go. Thanks for sharing that brilliant idea 👍🦊

@roysammons2445

3 жыл бұрын

I looked at the dimple foil impressioning kits and thought "I reckon I could do that with an old key. I have made a second key too that has the groove on the left for different locks. Those dimple foils can be made from cooking foil, not sure if that's what you call it in the US. Depending in the thickness depends on how many folds you have to make. Banggood do them at a decent price. You used to be able to get a box of 100 for around £3.60 but I think the price has gone up to just over £5. Still, a hundred foils would last a while.

@jackfoxlock

3 жыл бұрын

Roy Sammons Thanks. I may invest in a kit. 👍🦊

That’s a really good idea, especially as the impression kits are quite expensive. Such a great project I think you will see quite a few people trying this. Have a great weekend Roy.

@roysammons2445

3 жыл бұрын

Thanks Daz. Iii an surprised how well it worked, more locks to follow using it, maybe alongside the real deal.

hi there I'm here, your new friend. Nice to watch your video. Thanks for sharing. Keep it up and stay safe, stay connected

@roysammons2445

3 жыл бұрын

Welcome to my channel. Hope you enjoy the videos.

Absolutely brilliant mate 👍 👏👏👏👏 Obviously I'm going to have to give this a go soon. I really do take my hat off to you Sir 👍🙏🏻❤️

@roysammons2445

6 ай бұрын

I had foil impressioned several locks then thought to myself "i reckon a tweaked key would work the same". and apparently it is, WIN! Cheers Tinnie.

Wow! Really cool video! thanks for sharing.

@roysammons2445

3 жыл бұрын

And it's not that hard to make your own foils too, to make it 100% home made : )

Great job!!! Good result!! Bravo 👍🔓💯🏆

Right on, now that's some cool thinking. VERY NICELY DONE MATE

@roysammons2445

3 жыл бұрын

Thanks Thumper, I might even try it with a smiley key.

@thumperlockpicking9269

3 жыл бұрын

@@roysammons2445 it should work brother

Excellent tutorial video Roy, you did an awesome job, thanks so much for sharing 👍

@roysammons2445

3 жыл бұрын

Much and many thanks. It is a test piece but it worked really well. I'll try it on some better locks.

@BrummieLockPicker

3 жыл бұрын

Roy Sammons, it worked perfectly, excellent job 👍

I'd like to know how this works, I mean the theory. Richard Feynman said that things change for a person when they understand the difference between knowing and understanding. Most people who see this will know how to repeat what you did, but not understand why it is working. Like, would a heavier foil work better or worse, and why?

@roysammons2445

2 жыл бұрын

As far as I know there are two thicknesses of foils used in foil impressioning. This one is the slightly thinner foil. As the pins press down on the foil they start to sink in, as each pin in its chamber reaches its shear line it sets. when all the pins have set the lock opens.

Thats cool Roy. Gona have to give this a go. Where did you get the foil or did you make them too?

@roysammons2445

3 жыл бұрын

Foils were bought from Banggood for around £4 to £5. You can make them but without the tool it's tricky.

@Deadlocks86

3 жыл бұрын

@@roysammons2445 thanks Roy👍

Genial

@roysammons2445

9 ай бұрын

Thanks.

Please where did you get the wire

@roysammons2445

Жыл бұрын

If you mean the piece that holds the foil in place then detract, it's a piece of an injector pin. Piano wire would do the same job. I get my piano wire on Ebay.

@Mrkey-rg9jf

Жыл бұрын

@@roysammons2445 thank you🙏

It's easier to use aluminium foil tape.

@roysammons2445

3 жыл бұрын

That's in my list of things to try. Do you take the backing off or leave it on and put it across the key?

@obijanjebrave

3 жыл бұрын

kzread.info/dash/bejne/gGypxcmIYbWchrw.html

@roysammons2445

3 жыл бұрын

@@obijanjebrave Just watched your video which is a great demo on foil impressioning. Not sure it would work on the impressioning tool I made. Reason being you are using a dimple bump key which has holes for the pins to drop into. Then the foil would sit over the holes which would fall level with the highest cut pins. The dimple pins would then impression downwards into the foil. My home made key needs a slightly stiff foil to sit up off the key so the pins would impression into the foil. But you have inspired me to find a way to give ther foil tape a go.

I am vijaykumar locksmith in India bangalore What should be the thickness of foil

@roysammons2445

3 жыл бұрын

Not actually measured it. If you fold a good grade of kitchen foil four times that should work fine.

@roysammons2445

3 жыл бұрын

Just checked the thickness: 0.05

Genial

@roysammons2445

3 жыл бұрын

Thank you Muchas Gracias

Genial

@roysammons2445

3 жыл бұрын

Thank you for watching and commenting. And thanks for subscribing to my channel.