Nice work! Glad the old 6.4 lives again! I love my 08. I’m pulling 9000lbs this weekend with mine over 400miles.

@diagnorth

10 ай бұрын

Thanks man👍Aside from a few known problems, I think they are good trucks . I feel it's too bad the aluminum body wasn't out in those years or else we would see alot more of them on the road!

I have an 08 6.4 3500 for diesel., it can idle as long as there’s once over a half an hour if I put it into dries, I can’t make it more than a mow without it cutting off then it Hass to rest for 20 to 30 minutes then it will restart. Oil - oil, filter, fuel filters, air filter, glow, plug, eight, two new batteries installed.

@diagnorth

6 ай бұрын

@lionelchapman7629 If you have access to a scan tool, can you tell me what codes are active on the PCM? It sounds to me like you have a fuel issue. I have had something in fuel tank blocking suction line causing similar issues. I would double check the fuel pressure.

I have this similar issue except it won’t do it when the truck is cold once it reaches temp it stops reading it and flickers around. Will start in neutral no problem but not in park once I shut it off and try restarting

@diagnorth

5 ай бұрын

Could be a cable adjustment issue.. it is also possible that as a component warms up it stops working properly.. Such as transmission range sensor or tcm.

I have the same problem with mines 2008 ford super duty 6.4 can you help me

@diagnorth

4 ай бұрын

Yeah sure, you can reach out to me through my bio links. There is also a link to my website there.

I have a Ford F450 with a 6.4 and 78,000 miles My no crank problem is oil dilution, causing seized engine, crank.. bummer😊

@diagnorth

6 ай бұрын

Shit! That's another good possibility haha bummer in deed hopefully she didn't destroy herself

I got issue with my truck f250 2008 i got the battery light on I used the code scanner and this is what appeared P163A ford generator B control circuit , can you make a video of that i been trying to fix but I can’t find the issue

@diagnorth

2 ай бұрын

Hi there , thanks for your interest in what I do! My schedule is nuts rn. I haven't uploaded in a couple months bcz of that. But I will do some research and attempt to help you out. discord.gg/PVczuXHP follow the link and join my discord server . I have a few questions. Thanks!

Did it have to be flashed?

@diagnorth

9 ай бұрын

No, we had intentions on doing it..Now I know the autel ms909 can do everything else but the tcm. So we reset adaptive shifts and sent it.

Have a 09 f250 swapped out rail fuel pump now have no crank or fuel pump power

@diagnorth

3 ай бұрын

Can you do a fault scan? See if communication is a possible with pcm.

Hey changed starter ignition switch still no crank no start jump started from starter starts but shifts goofy and fans keep coming on johnnyo balt md

@diagnorth

Ай бұрын

Sounds like the tcm is not recognizing park. If the tcm is offline it will still try to shift but will have a hard time. It could also explain the fans due to an issue with the trans temp sensor wich may command the fans on to try to cool down transmission cooler. Can you tell me if it shows what gear its in, in the instrument cluster.

@diagnorth

Ай бұрын

You can also join my discord server where we can talk discord.gg/pGdntAxs

Why would you fix it let it rest in pieces What codes probably an egt or tcm😮

Roll it across the scales