As a woman repairing this type of window issue, I just want to say, "Thank you for such a thorough explanation and step-by-step instruction on how to do this fix!!" Excellent video! Bless you and thanks again!

@NexusAuto

5 жыл бұрын

Thank you so much Kim. That comment really means a lot and I am truly glad the video has helped you out. Bless you too, and have a fantastic weekend!

7 years later and I'm still coming back to your videos to keep my 04 GTP Comp G running and operating smoothly. Excellent, straight forward video. About to go out and tackle the job right now. Thanks for the video. Long live the 3800!

This is hands down one of the best "How to" Videos I have ever seen. Concise and straightforward. Seriously, excellent work.

@NexusAuto

3 жыл бұрын

Thank you very much Michael. I appreciate that! Amazing feedback!

07 Grand Prix here, thank you so much for making this video! It helped me open the door and find the problem easily, 10/10.

@NexusAuto

6 ай бұрын

No problem at all! Happy to hear the video was helpful!

Thank you! You’re a life saver! I’ve been looking everywhere for Pontiac videos and finally years later I find you! Lol I’m trying to get my Grand Prix back on the road.. I got a much needed bigger car but didn’t want to sell the Pontiac because it was such an awesome and fun car to drive.. but now i wish I had sold it and let someone else enjoy it instead of letting sit and go to waste😢

@NexusAuto

10 ай бұрын

It may be a bit late, but I'm glad you found my channel! Happy to hear they helped out. Funny enough, I did the same thing. I bought an SUV, but just can't get rid of the GP...love it too much

Wow, this is by far the best DIY video. I was able to replace the motor harness assembly with ease. Great video and clear instructions!Thank you!

@NexusAuto

7 ай бұрын

Thanks, thats much appreciated. Glad to hear everything went well!

3 years later and I'm back here to make another door regulator change it! Again, thank you!

@NexusAuto

2 жыл бұрын

No problem at all, and welcome back, even if it means something has gone wrong with your GP. Happy to hear the videos are helpful.

@jonmo2694

21 күн бұрын

Same!

I like the fact that you show how the job is done without the unnecessary commentary that you see in other videos, and you tell the audience what tools are required. Watching the video ahead of time prepared me to get the job done quickly.

@NexusAuto

3 жыл бұрын

That's great news. Happy to hear the video was helpful, and you got the job done quickly and with no issues. That's awesome feedback. Thanks for watching.

Dude you just saved me over $100. I've never seen a how to video as clear and helpful as yours. It was so helpful that after watching it a few times I memorized the steps and didn't even need to watch it again while replacing the regulator. Thank you so much!

@NexusAuto

2 жыл бұрын

That's awesome! I'm happy to hear the video helped out and you got it done from memory too! I really appreciate the feedback...thanks

Very thorough. I watched your video once and was able to complete the repair successfully the next day. Thank you sir!

@NexusAuto

Жыл бұрын

No problem at all. Happy to hear everything worked out. Thanks for the awesome feedback!

This video was awesome! My son's 2008 Grand Prix got rear-ended and the window stopped working immediately. We thought it had simply come out of it's track but both cable springs were sprung, just like yours. This video saved us a bunch of time and frustration. Got the part online and it fit perfect. THANKS

@NexusAuto

7 жыл бұрын

No problem. very happy the video helped you and your son out. Thanks for watching!

I have the same problem with my 07 GP rear window. Took it to an auto glass shop yesterday to find the problem and get an estimate to fix it. They told me it was the regulator and would cost $380 to fix it. They said the part was 200. I said thanks but no thanks. I will look on line for the part and you tube for instruction and fix it myself. Found the part to be about 1/4 the price and this video was very good and informative. I will be ordering the part today and doing it myself. Thank you so much. Will be saving over 300 bucks.

@NexusAuto

5 жыл бұрын

Awesome! Glad to hear the video helped out, and saved you some money too! Thanks for watching!

Thank you so much for posting this! Easy to follow and saved me from a labor rate of $150/hr. Parts only cost me $75 on Amazon. You’re the best!!

@NexusAuto

4 жыл бұрын

Awesome news! Glad everything went well! Every dollar saved is a win! Thanks for watching.

I appreciate all the details you provided along the way. It really helped in thoroughly understanding the process. Well done, sir!

@NexusAuto

Ай бұрын

@rexsephe thanks! I appreciate that! Happy to hear the video was helpful!

Thank you for making this video. I was able to replace the window regulator in my 2006 Grand Prix. The instructions were clear and easy to follow.

@NexusAuto

5 жыл бұрын

Awesome! Glad to hear the video helped out! Thanks for watching

Great video man. One of the few guys that can give instructions perfect and easy to see and listen to! Exact same thing happened to my 2004 grand prix only rear left. Door is apart and waiting on new regulator. Thanks for great video!

@NexusAuto

4 жыл бұрын

Thanks...great feedback! I really appreciate it! Glad to see you're almost done! Let me know how it goes once the regulator is in!

@timglenleigh1

4 жыл бұрын

@@NexusAuto got the part yesterday and installed today and works great. Watching your video made it easy. The 2004 Pontiac window regulator. Had a problem with the unlock and lock knob that sticks through door panel. I must have bent it and was sticking but finally got it to move properly up and down.

@NexusAuto

4 жыл бұрын

@@timglenleigh1 Awesome news. Glad to hear you got everything fixed up and even fixed the small hiccup with the lock/unlock knob. Thanks for the update!

You sir are a life saver!!!!! My daughter called me at 1:30 am telling me her window wasn't rolling up. She drove home from college that morning and we went to autozone got the parts and did step by step with you. Thank you so much !!! I

@NexusAuto

3 жыл бұрын

No problem at all. That's awesome that both you and your daughter got the job done. Happy to hear the video was helpful. Thanks for watching.

you can put the nut on the top,,, and the "brass" bolt on the left side,,, then bring them through larger hole and drop down, then it holds it better while installing third bolt . (it's easier to start them into regulator before sliding into door cavity,, just be sure to leave them loose.

@48wilber

5 жыл бұрын

also--- depending on which plant it was assembled at--- the door pull handle bolts may be T-25 torx heads....

@NexusAuto

5 жыл бұрын

Thanks for the tip. It will definitely help some who watch the video! Thanks for watching too!

Thanks. With your help, I replaced the window actuator with confidence and no mistakes. My problem was exactly what happen to you. The spring loaded blue cylinder was detached.

@NexusAuto

2 жыл бұрын

That's great news! Glad to hear the video was helpful and you got it done with no issues. Such a common issue. Thank you for watching, it is much appreciated.

Thanks for the video...I replaced both rear window regulators on my son's GP in less than an hour. Could not have done it without you!

@NexusAuto

5 жыл бұрын

No problem at all. Glad the video helped out. Appreciate the feedback!

Great video. I have to fully understand why things fail in order to be able to prevent it from happening again. After I got the unit out I fumbled around with the 2 blue plastic pieces that were sprung and noticed the only thing keeping them in was a small tensioner strip. You can cut that out, drill a tiny hole in the blue plastic piece, press it back in and use a small screw to prevent it from popping back out. You have to be careful not to pinch the guide wire that runs through it though. Seems to be a much better fix and only cost about 10 cents compared to 100.00 for a new unit

@NexusAuto

5 жыл бұрын

Awesome DIY tip. Thanks for sharing. It is a great, low cost alternative to replacing the whole part itself. Love seeing stuff like this!

@Brett235

3 жыл бұрын

I'm the same way. I only use my car to travel from work and back which is only a 25 minute commute and I'm the only one riding in it so I don't want to spend the extra money to purchase a new part if I can fix the old one. I thought about zip tying the springs to the motor assembly just to get the window back up and unplug the motor?

Absolutely massive help and such a thorough video that explains how the whole thing is situated in there and what you gotta do. Seriously you saved me hundreds of bucks doing something I got done in about 30 mins or so time in my driveway with a $40 or so dollar part. I cannot thank you enough.

@NexusAuto

4 жыл бұрын

No problem at all, I am really happy to hear the video was helpful. I really do appreciate this feedback! Thanks for watching and have a great day

Thank you, once again, for this video. I found a seller on eBay who had a combo deal on new left/right regulator/motor assemblies for just over $68 shipped. Received them within 3 days, and I just finished swapping both sides out in less than 45 minutes total. The biggest problem I had was the right rear window wouldn't lower using the switch, so I had to kind of force it down manually, before I could reach the second bolt that secures the window (the one that doesn't have access hole when all the way up). I'm happy to have both rear windows fully functioning once again, and don't have to tape them anymore to keep them from sliding down all the time. :D The only fluid I lost was plenty of sweat, due to this OK heat, but no blood drawn...so I'm calling it a WIN!

@NexusAuto

7 жыл бұрын

I would definitely call that a win! Happy that everything went well! Thanks again for watching too

NOTE: When removing the switch from the panel, it's a lot easier to just unscrew the housing and the whole thing comes right out. I used a T20 torx head screw driver. When I started to try to pry the hidden back clip off that plastic connector, all I could think of was, "if I break this thing, I'm going to be really sorry." Then I noticed the screws. Easy and fast. Changed out my daughter's throttle body today and saw packing tape on the back window with a 1/4" opening. Called her, she said her son was playing with the switch when she was rolling it up, and heard a pop. She told me she'd already ordered the part, so I'm also doing this job today. Thanks for the tutorial and heads up on the tools I need to get out there and fix this. Nice job, and a big help.

@NexusAuto

5 жыл бұрын

No problem at all. Glad the video helped out. Also, really appreciate you coming back and leaving the tips. Very good option and can be very helpful for future viewers. Thanks again!

You’re attention to a step by step process is invaluable! Worked like a charm!

@NexusAuto

5 жыл бұрын

Thanks Demario! Appreciate the comments, and glad the video helped out!

My same door as your just went bad, thanks for the great step by step...Ive done a front door and see there pretty much the same. thanks again great vid.

@NexusAuto

6 жыл бұрын

No problem. Glad it helped out. Thanks for watching too!

Thank you for your video! It gave me the information and confidence I needed to do this repair on my 2004 Grand Prix.

@NexusAuto

5 жыл бұрын

That's awesome, exactly why I make these videos. Glad the video helped out, and thanks for watching and leaving a comment!

GREAT video! I wasn't even sure how to get the door panel off until I watched your video. I just got done replacing the right rear window regulator assembly in my 2007 Pontiac Grand Prix. I watched this video before starting the job and I was able to easily complete the job with confidence. Thank you for making this video. It was extremely helpful.

@NexusAuto

3 жыл бұрын

That's great news. Glad the video helped out and you were able to complete the job with ease. Thanks for the great feedback

Very nicely done sir. Clear, concise voice. Good quality video. After watching, it took less time to replace both rear regulators than it took to watch the video. Thanks!!!

@NexusAuto

6 жыл бұрын

No problem Glad it helped out! Thanks for watching and the great feedback

Thanks a lot my friend. The video was very helpful in ordering and repairing our Grand Prix today. I couldn’t have don’t it without it. Thank you. Very helpful.

@NexusAuto

5 жыл бұрын

No problem at all. Glad it helped out. Thanks for watching too!

Over the past 12 months, both back windows of my 2006 Grand Prix have stopped working. I really appreciate such a excellent step-through of what I'll need to do to fix them. Now I'm off to purchase new regulator/motor assemblies! Thanks!

@NexusAuto

7 жыл бұрын

Tom Baddley no problem. thank you for watching and great comments. hope the repair goes well with no issues!

This video was very helpful. Saved me a bundle by doing it myself. I got the window to align by setting it in at the bottom but not tightening either side, then raising it and lining up the right hand bolt with the hole, tightening that so it would hold, then dropping it back down and tightening back and forth until both sides were good and tight. Works perfect and cost me 50 bucks instead of over 300 taking it to a shop. Thanks for taking the time to make the video.

@NexusAuto

6 жыл бұрын

Very cool. Glad everything worked out and it is all fixed. Thanks for watching.

Thank you so so much for making this. People like you are life savers. It's true what they say, you can learn anything on KZread/Internet.

@NexusAuto

6 жыл бұрын

Appreciate the comment Anthony. That's exactly why i keep putting these videos out. Glad to hear that it helped out! Thanks for watching and great feedback!

Thanks for one of the best instructions I've watched. Mine has a long extension connector on it. It would rattle when I closed the door. I zip tied foam between the connector and the door. 😊

@NexusAuto

Жыл бұрын

Thanks for the awesome comment! Great news to see you got that rattle fixed!

I am not great with vehicles and things going wrong with them but LOVED your step-by-step instructions; they helped me get the part out, I have ordered the new one and it should be here in a few days. Again thanks for such a great video and am looking forward to all of the new videos to come!!

@NexusAuto

3 жыл бұрын

I really appreciate the feedback, and happy to hear the video helped out. Would like to hear how it all goes when you get the new regulator back in. Awesome to hear you are getting it done and saving some money too!

@stephengladney

3 жыл бұрын

@@NexusAuto having a problem getting the interior fuse box out, we hooked up the new regulator the window will go down but not back up (tried both driver side and rear switch) any tips on how to get the tab keeping it in place moved to get it pulled out?.

@NexusAuto

3 жыл бұрын

@@stephengladney Sorry, I actually can't help on that. Truthfully, I had removed the underhood fuse box a couple of times, but never removed the Interior Fuse Box. I even checked the service manual and there is no info on how to remove it. So I could not confidently answer that. You don't hear anything when you press 'up' on the switch? No motor noises or anything?

@stephengladney

3 жыл бұрын

@@NexusAuto nothing at all when we push up on the switch, my son just reminded me that it will go down from the back door but we don't have anything at all happen for that window from the driver side panel

@NexusAuto

3 жыл бұрын

@@stephengladney hmm that is a tricky one. Unfortunately, that leads me to believe it could be something with the driver side switch. Both switches run on the same fuse, so it is works from the back door, but not the front, there may be an issue with the front switch It could be something simple, like the plug that goes into the front switch is not pushed in all the way, a bit of corrosion on the switch, or a severed wire somewhere. Hard to say for sure. Normally, in this scenario, I get my multimeter out and start testing. I think as a next step, if you haven't done it already, I would say to take off the driver side door panel and check to make sure all wires are plugged in correctly, and that no wires under there are damaged, torn, or pinched.

I want to thank you for making this video. I just finished replacing the regulator. The last part of the video on the alignment of the window was so important. Everything is working great. Thank you so much ! ! ! !

@NexusAuto

4 жыл бұрын

No problem at all! I'm very happy to hear about your success, and the video was very helpful! Thanks for the feedback, and thanks for watching!

Mine just went tonight. I've done several window regulators before, but never a GP. Every car has it's only little quirks when it comes to this repair, and your video did a great job of pointing them out. Thanks so much!!

@NexusAuto

7 жыл бұрын

No problem. Glad it helped out. Thanks for watching...appreciate it!

I found a quicker temp fix when the rear drivers side window messed up in December 2020. I took the door panel off, took out the bolts for the regulator and disconnected the wiring and cut a piece of 1 X 2 long enough to lock the glass in place, shoved the glass up and stuffed it in between the glass and the bottom of the door and put the door panel back on. It was just to dang cold to try to replace the regulator in the middle of December. Only took about 1/2 an hour. Then when the nice weather returned this year (August 2022 only took about 18 months to decide it was time to finish the work) I pulled everything apart and replaced the regulator without having to disconnect everything. As per, I returned here to double check what had to be done and completed the job. Your videos are very informative and right to the point. That's why I always return here to find out how to do repairs on my 05 grand prix. Man I hate repairing these newer cars. Nothing is simple any more. My next job is replacing the L/F wheel bearing. Finally tracked down the problem. 3 repair shops couldn't give me a definitive answer to the problem. Either a tire or a bearing. I already knew that but either way it was going to be an expensive repair. I replaced the tire with a known good one from a friends car. Problem persisted. Guess it wasn't the tire. LOL Part is outrageously priced but I guess if I want to continue driving the car I gots to do what I gots to do. LOL I'll be looking for a video here if you have one to double check that I do the job efficiently (that's just a fancy term for doing the job right LMAO). Just to save time, do you have one on changing the L/F bearing?? Anyway, appreciate the videos. Keep doing what you do good. Take care and be safe.

@NexusAuto

2 жыл бұрын

Nice work on the temp fix! I wouldn't have thought of that, but works so well! Glad to hear this video helped out too! That's crazy that 3 shops couldn't figure out the wheel/bearing issue. Sometimes it's just finding the simple solutions. Even just swapping tires front-to-back or across the axle can get the job done. At least you got it figured out! Unfortunately, I didn't get to make a video on the wheel bearings at this point. I would like to make one in the future, but nothing now. Great to hear from you again!

@missychevious3137

2 жыл бұрын

@@NexusAuto No problem. I'm pretty sure I can do it. Can't be much different from others I've done in the past.... I hope. LOL What I am wondering is if it could have been going since I got the car. There's been a screeching in the L/F wheel since I got the car. It only happens when I'm backing up. It sounds a lot like the backer plate is rubbing. I asked a guy at a shop I had it into to have tires changed right after I got it to check it, He said the backer plate was bent. I went under and looked for myself. It's not bent. It's no where near the rotor or the rim. I raised the car and blocked it up and put it in reverse and no noise. Kinda has me wondering now. I know it wasn't the brakes. I put them on new when I got the car and thoroughly checked them before letting the car down. I'm going to go over it with a fine tooth comb when I do the bearing to see if maybe there is any other problem. I thank you for your response. It's good to hear from you as well. Take care and be safe out there. Until nexus time. LOL

@NexusAuto

2 жыл бұрын

@@missychevious3137 I'm sure you can. It's pretty much the 'standard' lol. From what you're describing, I would say it's a good bet it's the bearing. Not many things that can cause the screech...brakes and wheel bearings are where I would be going first. Since the brakes seems to check out, Wheel Bearing is next. 'Nexus time' lol. I may actually use that. I like that a lot! 😂. Thanks again, take care and stay safe too! Hope the bearing goes well!

@missychevious3137

Жыл бұрын

@@NexusAuto I took the car for a drive today. The screech is only there when in reverse backing up but never when I'm driving forward. It's always the same. To me it still sounds like something to do with the backer plate. I'm going to pull it to be sure. I replaced the pads, rotors and calipers all the way around when I got the car. The problem is the ....it's almost like a howl. It starts out low and as the speed increases it increases in intensity. Not so much volume but intensity. It's not a grinding or growl like you would expect with a bad bearing. That's what's so baffling about it. I've had tires make the same noise in the past. I changed them and no more howl. That's why I figured it was a tire in the beginning. I did a nasty today. I took it in and had a new tire put on. Took it for a test drive and same howl was present. Took it back they replaced the tire. Owner went with me to test again and the howl was still there. He had the new tire pulled and mine put back on and refunded my money. I was just going to leave the new tire on but they didn't feel that was right. I tried talking to them but they were adamant about putting my tire back on and refunding the cost of the tire. They didn't feel I should be replacing something that didn't need replacing. He had no idea what could be causing the noise either and he's also a licensed mechanic. Guess who I'll be dealing with from now on. Anyway, I'm going to go ahead and order the new hub and see what happens. Not much else I can do. Need to figure this out before something major happens. Kinda weird. You take care and stay safe.

@NexusAuto

Жыл бұрын

@@missychevious3137 hmmm, that's interesting. I've seen this happen I'm a few vehicles...check your brake pads and rotors for any damage or heat marks. I've seen a situation where either the brake pad may have jammed inside the bracket, and is stuck touching the rotor. The one I've seen more, especially in older cars, is if the rubber brake hose collapsed inside. If you look at the hose outside, it looks fine..but the hose inside the outer rubber hose could collapse. What could happen if the hose closes is that the brake fluid can't get back up to the master cylinder, and effectively seizes the piston against the pad, so it's always rubbing on the rotor. Especially since you changed the pads, rotors and calipers, there is a possibility the hose is no good. Definitely worth taking a look at. I do respect what the shop did with removing the tire and putting back on the old one. I know too many who would happily take the money. That's a good thing to see a shop being honest. Hope that helps a bit. If the brakes look all good, then you're back to square one lol. Hopefully you find out what's happening Thanks and same to you...stay safe!

Thank you so much! This made my installation flawless on my 2006 GP! Great explanation, great video! Kudos for making this so much easier!

@NexusAuto

3 жыл бұрын

Awesome news, glad to hear everything went well. Thanks for the great feedback

Very good video!! My window just died on us and this was very helpful to what I need to do!! Great job and keep up the excellent work!!! Thanks again!!!!

@NexusAuto

6 жыл бұрын

Thanks! I appreciate the feedback. Glad it all helped out!

Very clear cut, good video with a lot of step by step info.

@NexusAuto

2 жыл бұрын

Thanks, much appreciated. Glad the video helped out

Just ordered a new regulator assy from Rockauto ($66 shipped) and went looking for a how-to. So glad I found your video - very informative, helped me get my glass back up until the new part arrives. Good job!

@NexusAuto

7 жыл бұрын

Thanks appreciate it! Thanks for watching and glad it helped! Love Rock Auto too!

The top regulator nut and left bolt can be on assembly before inserting in door and then hung through their slotted attachment points (no fumbling through the small holes.)

@tremayne3

4 жыл бұрын

Very helpful advise.

@dawgaintwyfrom4456

3 жыл бұрын

I have to do this in 2020 wish me luck.

Thank You ! Well done And understandable Your voice was calm , straight forward and confident . You allowed mistakes with solutions. By watching video , I know I can do this . Your a natural ! God has gifted you! I hope you are successful in all that you do God Bless

@NexusAuto

2 жыл бұрын

Thank you for the great feedback too! I really appreciate it, and I am happy to hear it will help you get this done. Have a great day and God Bless.

Thank you for making this video! it was well done and easy to follow. It was nice to be able to change the part out by myself for under $50!

@NexusAuto

4 жыл бұрын

No problem, and glad the video was helpful! Always great to save some serious money! It is a pricey job, otherwise. Happy to hear it all went well!

Wow great video man! Both of my rear windows are toast so I might give it a shot. Thanks for a detailed explanation and pointing out your mistakes.

@NexusAuto

Жыл бұрын

No problem at all! Happy you found the video, and it'll help out!

This was actually really easy to do. With the help of your video. Thanks so much!

@NexusAuto

2 жыл бұрын

No problem at all. Awesome news to hear the video helped out.

Thanks for posting this. I have a 2005 GP GXP and the left-rear window just dropped down and stopped working yesterday. Now I'll be able to blast through the replacement process.

@NexusAuto

6 жыл бұрын

Awesome. Glad the video is helpful for you. Let me know how it goes. Thanks for watching!

I appreciate you posting this. Saved me a bunch of time. I just finished replacing my daughter's regulator. Only mishap was I had my finger in the wrong place when cycling the regulator up to the glass. Only a little blood shed. :D

@NexusAuto

7 жыл бұрын

Rod Rosburg well a little blood is better than a lot lol. thank you very much for watching and glad it helped!!

Thank you so much for taking the time to post. Great information. Not sure why there are 19 dislikes...geez! Some people just cannot be pleased. I appreciate the information and will be very helpful.

@NexusAuto

5 жыл бұрын

No problem at all! Thanks for the great feedback and comment! I have a general message, if someone dislikes, let me know why, so I can make the videos better. But I have nothing but positive feedback on here, so no idea why, but hey, what can you do?. I definitely appreciate the support! Thanks for watching!

Thank you this posting was perfect for repairing our rear door regulator.

@NexusAuto

5 жыл бұрын

No problem. glad the video helped out!

Thank you for the helpful video. I had the same issue happen but unfortunately my switch was also broken on the door. I was able to use a 12v DC power supply to move it up and down, worked great. Also, the drivers seat switches worked but I didn't think about that until after... Thanks again!

@NexusAuto

10 ай бұрын

No problem at all. Sucks that you had a couple of different failures there, but it happens. Happy to hear everything worked out and the video was helpful

Great video great shots and great audio quality thanks for all the help made this so much eazy

@NexusAuto

4 жыл бұрын

Thanks! Appreciate it. Glad the video helped out!

Great video I may have just saved myself $100 to have it installed. Keep up the great work. Going to go try it now. Cheers

@NexusAuto

4 жыл бұрын

Awesome, glad to hear the video helped and it will save you some money too. Thanks for the great feedback!

Nice video, mine stopped work last night. Will fix using your video. Thanks so much!!!

@NexusAuto

5 жыл бұрын

No problem at all. Thanks for watching!

Excellent instructions. I would have had no idea how to do this and the part came with no instructions. I had a problem removing the door panel because my 10 mm socket was too fat to reach the two bolts through the arm rest. I eventually noticed the bolt heads also accepted a torx bit, so no problem.

@NexusAuto

6 жыл бұрын

Thanks, appreciate the great feedback. Glad the video helped. The torx bit is a great idea too...some sockets are just too big to fit! Thanks for watching.

Great video. Very helpful. Did find it was easier to remove the switch from the door panel by loosening the bracket with a torx screwdriver.

@NexusAuto

6 жыл бұрын

Awesome! Glad it was helpful. And thanks for adding the tip too! Appreciate it!

Great Stuff. I appreciate your knowledge, you break it down for everyone to understand.

@NexusAuto

2 жыл бұрын

Thanks, I very much appreciate the feedback. Glad to hear the video is helpful.

I replaced this by myself in an afternoon. I have never watched a tutorial that was so helpful, thank you so much! You made it so simple! Window works great now 😄

@NexusAuto

6 жыл бұрын

That's awesome news...glad it helped out. Thanks for the great feedback as well. Really made my day! :)

Thank you for making this, helped me solve a problem that i didnt have time to figure out.

@NexusAuto

5 жыл бұрын

No problem. Glad it helped out.

Thank you so much. I know I’m late but you’re video helped me step by step. Got the new regular/motor on and now back to good!

@NexusAuto

11 ай бұрын

That's awesome news. Glad to hear the video helped out

Within first minute you matched my diagnosis. Looks like a project for tomorrow. Thanks for the video!

@NexusAuto

5 жыл бұрын

No problem! Glad the video helped out. Good luck on the project!

Thanks so much for the tutorial! It saved me a lot of money, which was very much needed!!

@NexusAuto

4 жыл бұрын

No problem at all! Glad the video helped out, and you have more money in your pocket! Love hearing stories like that! Thanks for watching!

Wish I would of seen your video first. Would of saved me some time and headache. Great video. Thanks.

@NexusAuto

6 жыл бұрын

damn that sucks. Hopefully it didnt give you too much trouble. thanks for the great feedback as well.

Thank you so much for your grand prix videos! I'm hoping things go smoothly and this one saves me from having to come up with labor fees. You wouldn't believe how badly I got took on my 2006 Grand Prix. I'm ashamed and embarrassed about it. It's bad. I fixed the headlights by changing the blinker. And I used a heat gun to get torn up tint off the windows. My neighbors want me to work on their cars now. Uh, no! lol I've got a lot more to do to mine. Wish there was an easier way to get to the power steering. I'll be watching for that video. Mine has a slow leak. :) Thanks again!

@NexusAuto

Жыл бұрын

No problem at all. I'm happy you found my channel. Really sorry to hear about your situation with your GP. But it sounds like your are righting some of those wrongs. These things happen, and it sucks. I hope this fix, and any others you come across, go well. And who knows...I will likely have a PS fix video sometime in the future, just not sure when. Thank you for the support and feedback!

@alannasutherland2426

Жыл бұрын

@@NexusAuto I can't get the dang bolts out from the arm rest! I feel stupid! :)

@NexusAuto

Жыл бұрын

@Alanna Sutherland oh damn! That sucks. Don't feel stupid though. I can't tell you how many times I've encountered annoying issues like that! It happens. What's happening though? Will the screws not come loose at all? Or do the come loose, but you can remove them from the holes?

@alannasutherland2426

Жыл бұрын

I got them out of there but they didn’t come loose from the little plastic thing they were screwed into lol once I got inside that door there’s nothing inside of there!!! Oh my goodness. I don’t know whether to continue or just take the glass up or it won’t never open or I don’t know. The plugs are there the wiring is there so I’m probably, being an Aries, going to go for it. Thanks for being there!

@NexusAuto

Жыл бұрын

@Alanna Sutherland wait...what? That's crazy that the motor wasn't there? Did I read that right? Wow. Well go for it for sure! Hopefully it all goes well. Let me know how it goes

Saw your video, I can do this, bought the part, saw your video. Installed perfectly. Thank You.

@NexusAuto

4 жыл бұрын

Awesome! Happy to hear it all went well. Thanks for the feedback too...appreciate it. Thanks for watching!

@vracerv

3 жыл бұрын

Lol. Thank you again, had to watch your video again to fix same side but on another Grand Prix but GXP.

Thanks so much for this video, I have the same problem with one of my rear window . now i'll be bale to fix it!

Thank You My Brother! I would have missed the correct order of setting window through the top hole! Peace!!

@NexusAuto

7 жыл бұрын

No problem at all. Glad it helped, and thanks for watching!

Great video. Very good step by step instructions. Thank you

@NexusAuto

4 жыл бұрын

Thanks, appreciate it! Glad the video will help out

Just ordered the part. Will give it a shot next week.

@NexusAuto

5 жыл бұрын

Awesome, sounds good. You'll be back to new in no time!

My right rear window just started doing the same thing. Gonna order the part and attempt repair. Thanks for your video.

@NexusAuto

5 жыл бұрын

no problem. Glad the video helped out!

Thank you so much for this video it really helped me fix the rear window problem 👍😀

@NexusAuto

3 жыл бұрын

That's awesome news. Glad to hear it all worked out. Thanks for the feedback!

Great video, very easy to follow even for a less mechanically inclined guy like myself. Thank you

@NexusAuto

5 жыл бұрын

Awesome. Love comments like this, means a lot. Happy it helped, and thanks for watching.

Hey bro thank you so much for this video. I just fixed my back window thanks to u!!

@NexusAuto

3 жыл бұрын

Awesome news. Glad to hear the video helped out. Thanks for the feedback!

Plan on tackling this in my 06 Grand Prix this week. Will update when finished.

@NexusAuto

3 жыл бұрын

Sounds good, hope all goes well. Keep me posted.

@doZerBoy

3 жыл бұрын

@@NexusAuto SUCCESS!! Since I watched ur video a couple times before I started, I was OVER PREPARED. 👍👍 Appreciate the help. Also, I actually used little suction cups to hold the window up. Just stuck'm low on the window and tucked them behind the rubber seal. Worked great. Thanx again bro

@NexusAuto

3 жыл бұрын

@@doZerBoy No problem at all. Thanks for the update. Great idea on the suction cups. I always like hearing about people finding new ways to get things done.

Great video! will be doing this to both back windows soon. Cant believe how its all bolted in instead of riveted.

@NexusAuto

5 жыл бұрын

same here. Most I have seen have rivets, not bolts. But considering how easily those springs snap out, it may be a good thing...much easier to deal with the bolts. Glad the video helped out! Thanks for watching!

Thank you for the video it help me decide if I was going to pay someone or do it myself. I did it myself thanks to your video!!!!!! $46 parts me during the work priceless!!!! Now if I can only find the screws that go into the door lol

@NexusAuto

6 жыл бұрын

LOL yeah they tend to get lost. Hopefully you found them :D Thanks for watching and happy to hear the video helped out!

Your video was awesome ! Thank you very much it was easy with your help

@NexusAuto

6 жыл бұрын

Great! Glad to hear it helped out so much! appreciate the great feedback. thanks for watching!

Thanks for the how to.. my 2005 has the same problem same window as yours..

@NexusAuto

5 жыл бұрын

No problem. Glad it helped out. Thanks for watching!

Good job, good explanation! Need to do that same door on ours - nice to know what to do without having to figure it all out myself. Thanks!

@NexusAuto

6 жыл бұрын

No problem at all! Thanks for watching

Thank you. This video was perfect. I fixed my window with ease.

@NexusAuto

3 жыл бұрын

Awesome news! Glad to hear the video helped! Thanks for watching

Great video. Now, I’ll see if I can do it as successfully. Thanks.

@NexusAuto

4 жыл бұрын

No problem, thanks for watching and glad to hear the video will help. Good luck on the job, I am sure it will go well!

Thank you for sharing this video. You are a life saver!

@NexusAuto

3 жыл бұрын

No problem at all! Happy to hear it will help save the work and some money too

Thanks brother! Very easy and strait forward help video.

@NexusAuto

4 жыл бұрын

No problem at all! Glad to hear the video will work out! Thanks for watching!

Thank you very well filmed and explained!

@NexusAuto

6 жыл бұрын

No problem at all. Thanks for leaving some great feedback!

Great walk through! Mine just did the same thing, same window. This was a great help.

@NexusAuto

5 жыл бұрын

Thanks, appreciate it. Glad the video helped out!

Great video. Helped a lot! Appreciate it!

@NexusAuto

6 жыл бұрын

Awesome, glad it helped.Thanks for watching

Fantastic! Great teaching video. THANK YOU!

@NexusAuto

2 жыл бұрын

No problem at all. Thanks for the great feedback

Thank you!!! Big problem with Grand Prix

@NexusAuto

3 жыл бұрын

Completely agree...very common issue. Glad to hear the video was helpful

Thank you for these videos you are a life saver!!!!!!

@NexusAuto

2 жыл бұрын

No problem at all. Glad to help out.

Excellent video Thank you

@NexusAuto

6 жыл бұрын

No problem. Glad it helped. Thanks for watching

Great detailed video. Thanks for that. I had the same exact thing happen to our 2007 GP and will be doing the same thing.

@NexusAuto

6 жыл бұрын

No problem. Thanks for watching!

Great video!! Thanks for the detailed step by step approach!

@NexusAuto

7 жыл бұрын

No problem. Glad it helped out. Thanks for watching.

So I am giving you an A+ for your video - I use shims to hold the window up, it works well - I dont like cleaning glue from the tape..

@NexusAuto

6 жыл бұрын

Shims are a great idea. It was a pain to remove the glue from the tape without damaging the aftermarket tint, especially since the tint is about 7 years old. Shims ftw! LOL

Followed to a T and I was able to change everything within 35min. A+++

@NexusAuto

6 жыл бұрын

Awesome news. I am glad the video helped out. Thanks for watching

Thank you for your video . It was so helpful.

@NexusAuto

5 жыл бұрын

No problem. Glad the video was helpful! Thanks for watching!

Good old GM windows - probably be replacing them again next year - pontiacs, buicks, oldsmobiles, constantly breaking - Very good job on your video - I am experienced tech and I watch the videos just for reference - you did an excellent job BRO - I wish more people did there videos like you instead of just playing there dam music - lol

@NexusAuto

6 жыл бұрын

Thanks Keith. It is a very common thing for these GMs lol. Appreciate the great feedback and comment too! Thanks for watching!

You did good pal. I really liked your video.

@NexusAuto

2 жыл бұрын

Thanks, much appreciated.

This video helped me out so much. Thank you!!!!!

@NexusAuto

5 жыл бұрын

No problem! Glad the video helped out! Thanks for watching!

I got rid of the nasty duct tape glue residue by rubbing with a rag with a little gasoline. worked well on the glass and even on the header above the window. washed with soap and water on a clean rag immediately. No damage to our '99 GTP.

@NexusAuto

6 жыл бұрын

Cool. Very good tip for watchers. Thanks for sharing and for watching. Appreciate it.