03 cobra came in for a horrible sound, cylinder 5 had 0psi compression so we took the engine apart and this is what we found
Жүктеу.....
Пікірлер: 4
@ucnhtmenow18 ай бұрын
Long story but I had a fresh build 98 cobra teksid that sat for 6 years and I just recently put it in a 01 cobra that had a blown motor. I got it all together and it didn't start. Someone pointed out that I forgot to put in the crank trigger wheel because I just didn't have one after all this time. I didn't want to mess with the timing at all but I had trouble finding the 98 wheel so I reluctantly swapped the crank sprocket to the upgraded 01 single sprocket to match the 01 cobra trigger wheel. While it was all apart, I noticed the gum-up around the tensioners that had been sitting for 6 years, so I swapped all the 01 stuff in that I could (chain guides and tensioners), to save me a headache in the near future. Also the crank was hitting the baffles in the pan that came off the blown motor and I thought it was something bad, but I got all of those issues panned out and will try to crank the car tmw. All that being said, videos like this are a blessing. I'm a fox guy so this 4v stuff is a bit different to me.
@texaseliteperformance4471
8 ай бұрын
Good luck with the first start up👍🏽
@jrrockett Жыл бұрын
WoW Where were you going with all that silicone? On a deep sea dive er what! Holy Smokes LoL
Пікірлер: 4
Long story but I had a fresh build 98 cobra teksid that sat for 6 years and I just recently put it in a 01 cobra that had a blown motor. I got it all together and it didn't start. Someone pointed out that I forgot to put in the crank trigger wheel because I just didn't have one after all this time. I didn't want to mess with the timing at all but I had trouble finding the 98 wheel so I reluctantly swapped the crank sprocket to the upgraded 01 single sprocket to match the 01 cobra trigger wheel. While it was all apart, I noticed the gum-up around the tensioners that had been sitting for 6 years, so I swapped all the 01 stuff in that I could (chain guides and tensioners), to save me a headache in the near future. Also the crank was hitting the baffles in the pan that came off the blown motor and I thought it was something bad, but I got all of those issues panned out and will try to crank the car tmw. All that being said, videos like this are a blessing. I'm a fox guy so this 4v stuff is a bit different to me.
@texaseliteperformance4471
8 ай бұрын
Good luck with the first start up👍🏽
WoW Where were you going with all that silicone? On a deep sea dive er what! Holy Smokes LoL
@texaseliteperformance4471
Жыл бұрын
It'll be aight