I followed your directions and it worked out perfectly! All the way thru pulling out the liner thru the passenger door. Knowing the path I was going to take saved me time and hassle. I saw that someone commented that his visors had Phillips screws. I actually used and Alan key. But noticed, once i got them out, that a wide flat head screw driver would also have worked. Thanks for video

Thanks for the video. I used your video to help me take out my headliner for a 2007 Honda Accord.

@Sharaye85

8 ай бұрын

Does your 07 have the curtain air bags, and were there any problems you ran into with it?

@AKIRA-oz5cg

8 ай бұрын

@@Sharaye85i have an 05 and I had sid curtain airbags do u know how people remove the headliner without making the airbags go off

Thanks for this video, it helped me take my son’s liner off.

👍🏻👍🏻👍🏻

I have seen some vidoes where they don't touch the door seals or trims and still be able to remove and reinstall from the rear passenger (back side of driver side) is that possible? Q2. What is holding the whole headliner assembly to the roof? Is it those lights at the front and middle, then 4 hands and a,b c pillar trim covers?

1000 times better!! Thanks for sharing!! I’m getting ready to replace the one in my daughters car I had a pretty good idea of how to do it but wanted to make sure. Wish me luck lol

@yen7564

8 ай бұрын

Hey how did that go for you?

And you definitely need to use a plastic removal tool for a lot of that stuff. Especially the push light lenses. I mean they actually do make a very inexpensive tool for that or you could take a look at one online and make one on your own. Just using a short and thick steel screwdriver tip vs. 2004 plastic more times than not you're going to crack it. Not that you can't find a hundred of them at the boneyard but save yourself the trip. I wish you would have shown the headliner be in taking out and put back in through the front passenger door. Besides that, thanks for the info

Thanks 🇵🇷

Thanks

Also they aren't flatheads on visors they are Phillips screws

And you're propping out the lenses for the lights they're not mirrors either 🤣

The first removal is the visor not the mirrors 🤣

I’m gonna out stars in my roof and out a touchscreen it it 😏