1st gen QR sounds so good with an intake.

@BuckeyeBallistics

3 жыл бұрын

Yeah I wish it lasted longer than 1000rpm though.

Great vid

Cool your doing the same things I'm doing to my 06 shitbox. I already lost my ebay filter on the highway. Glue keeping filter to base came apart. Had to pay $35 for just the filter at Autozone.

@BuckeyeBallistics

3 жыл бұрын

That sucks lol. My filter has held up, no issues so far. I just installed an aluminum crank pulley so I'll have a video on that soon and more pulls. Debating deleting the balancer shaft...

@ImplantDetected

3 жыл бұрын

😂😂😂 #Comedy

Nice job. Super bro

Tried also 19 inch 245 40 it’s driving amazingly but it sucks fuel like nothing got 6.5 km per 1 liter of fuel which was about 10 km per 1 liter before

BIGGG ALTIMAA POWER 🔥🔥🔥

The price varies between cars I got mine from injen for 150

I just bought the same air intake for my car I got the red and new valve cover lol

Damn bro you take that thing 4 Wheeling!

@BuckeyeBallistics

3 жыл бұрын

I sure do. We take it down to the shooting range a lot and it is muddy as hell down there after a heavy rain or snow.

@marcs4091

3 жыл бұрын

@@BuckeyeBallistics lol, you need a snorkel not a CAI

@BuckeyeBallistics

3 жыл бұрын

Probably accurate 😅

Lesson learned, buy the more expensive part

Bro, this video is gold. I bought the exact same sh!t and am doing the exact same thing. You trouble shot this ahead of me and I will do exactly as you did. Have you had any problems with this configuration since the install?

@BuckeyeBallistics

3 жыл бұрын

No it's still on the car and working fantastic, no adjustments.

@rickgrinds

3 жыл бұрын

That's crazy i bought the same site too, installed and everything crank the car up let it idle for a while then soon as i touch the gas it bugs down and cuts off..idk what i did wrong

@BuckeyeBallistics

3 жыл бұрын

Uh, did you install and plug back in the maf sensor?

@rickgrinds

3 жыл бұрын

@@BuckeyeBallistics yeah, i hooked the original intake back up and everything worked perfect

@BuckeyeBallistics

3 жыл бұрын

Weird

Ebay aftermarket parts, salvation for the poors lol. I just got the rims for my rio, also just ordered pulleys. Any other upgrades that would be worth it? I was checking out sway bars, since the car does sway a bit when taking a corner fast

@BuckeyeBallistics

4 жыл бұрын

Have you tried the new wheels and tires out yet? Cause it leans less in the corners with that setup. I'm gonna do my exhaust here soon, can't remember if you already did yours or not yet.

@r0ast5_61

4 жыл бұрын

@@BuckeyeBallistics I just got the rims today, I'm gonna hit the tire shop first thing in the morning, I already talked to them and got a quote for those as05s. One thing I did is I got a k&n cabin air filter. Was like $18 on Walmart's website. It really helped with the amount of airflow I am getting from the vents. I live where it sits around 100 for most of summer, so that boost in the amount of airflow helps alot. Only took a a few seconds to swap the old paper one out

@NativeTexMexican

4 жыл бұрын

Some iridium spark plugs might help a bit. Also, A diy ram air intake will keep intake temps down & you can make it out of a shop vac hose and some zip ties.😁👍

@r0ast5_61

4 жыл бұрын

@@NativeTexMexican did a tune up with some ngk iridium spark plugs, went from 38 highway to 40 highway

@BuckeyeBallistics

4 жыл бұрын

Lol I didn't know k&n made cabin filters. And you have a cai right?

If i was to do this to my car what are some things i need to have in tact before it

@BuckeyeBallistics

3 жыл бұрын

I don't understand what you're asking me.

@XtendoD

3 жыл бұрын

Guns&Cars usually when people do mods they talk about other engine parts that have to be in good condition before the mod is put in

@BuckeyeBallistics

3 жыл бұрын

Not exactly sure what they've been saying in the other videos you've been watching, or what mods those videos were of. But generally speaking, what some will often say is you should have the car running right before modifying, which is true- because what is the point of doing intake or exhaust work trying to gain 5hp, when you are down 5hp due to crappy plugs or something like that. Aside from that, if you add a turbo or nitrous or something like that to a car, you would generally want to do it to a low mileage engine so the pistons and rings and bearings can handle it, or else build the engine to handle it. Something like an exhaust system or a cold air intake doesn't require preperation like that, though it is wise to have the car tuned up before seeking more power with *any* mod. I hope this answers your question...

Bought my Altima and realized it had a broken stock intake box so I threw one of these puppies in there rather than putting another stock box

@BuckeyeBallistics

3 жыл бұрын

That's what I would have done.

How many miles is your at? Any transmission issues at all? I try to exchange a bit of fluid every 25-30k.

@BuckeyeBallistics

3 жыл бұрын

150k ish. The trans acts funny until it warms up for some reason, slipping a little and jerking a little. But once warmed up, flawless. I need to change the fluid and filter. It's my beater car so I haven't been too worried about getting to it yet. The engine is what you need to be worried about with these with that pre-cat in the manifold breaking up amd getting sucked into the engine, which is why I immediately put a header on mine.

@judicialpeach9895

3 жыл бұрын

@@BuckeyeBallistics can definitely agree, I gotta let mine warm up for maybe 4 minutes or else shifting is quite rough.

@DJBpartyTV

3 жыл бұрын

@@BuckeyeBallistics I have that same jerkiness on my 06 2.5sl on a cold start. When it warms up though it's a jet. My boy is a mechanic and he said it might be my engine mounts. I'm at 113,xxx miles.

@BuckeyeBallistics

3 жыл бұрын

The engine and transmission mounts are rubber. When the mounts wear out, they allow the engine and trans to move around more than they should, which can cause some clunking sounds occasionally. However, being rubber, they will be firmer (allowing less movement) when cold. As they warm up with the heat of the engine and transmission, they will become softer and allow more movement. So if it were the mounts, it would get worse as it warms up, not improve.

Anyone know if this’ll fit on the 3.5L?

@BuckeyeBallistics

2 жыл бұрын

Probably not but they make them for the 3.5 also, so why not just order the right one...

🤣🤣🤣🤣 I’ve tried that before with k&n filter still not good fuel consumption become more black spot on the muffler also the car struggling to move in hot weather 🤣🤣🤣 so I’ve trashed all these and stay with oem setup and everything is fine

You lucky, I can’t even find any performance parts for my 04 bmw 760li on eBay.

@BuckeyeBallistics

4 жыл бұрын

That's because generally nobody is going to buy a $30 intake for a high end car like that lmao.

@juancastaneda9844

4 жыл бұрын

Guns&Cars True, I bought replacement high flow air filters from afe and they were $83.00 a filter plus tax and this engine takes two of them.

@BuckeyeBallistics

4 жыл бұрын

Buy the piping and rubber joints and clamps and make your own.

@juancastaneda9844

4 жыл бұрын

Guns&Cars I’m doing that on my bmw m6 v10. But for the 760li is more complicated since the air boxes have electric motors that open a flap at a certain rpm range. And if I disconnect them I’m pretty sure the cel light will turn on. I already have a Christmas tree on the instrument cluster 🤣🤣🤣.

@BuckeyeBallistics

4 жыл бұрын

@@juancastaneda9844 Bypass them. I had vehicles in the past with the stupid intake flaps like that and used to tie them open lol.

Lmao V-tech did kick in wtf 😳

@BuckeyeBallistics

3 жыл бұрын

Yep, it has cam lift like vtec.

@XenomorphLV426

3 жыл бұрын

@@BuckeyeBallistics it sounds cool, but not the same or similar.

Where did you find the headers

@BuckeyeBallistics

3 жыл бұрын

Ebay. I showed which ones and the seller in the install video.

Why does it sound like it hits vtec on a Altima ? Lmao real question though.

@BuckeyeBallistics

3 жыл бұрын

Because it does- it hits lift like vtec. Toyota has engines that do this as well, like the 2zzge in the Celica's and Corolla & Matrix XRS models. I actually have a bunch of videos of the XRS Corolla hitting lift on the channel because we have one. Check out the Corolla playlist if you want to see it.

@aycomochingas

3 жыл бұрын

@@BuckeyeBallistics crazy! I never knew this engine had lift. Lol thanks for the info bro.

@BuckeyeBallistics

3 жыл бұрын

Yup.

@XenomorphLV426

3 жыл бұрын

@@BuckeyeBallistics it's actually the secondary intake runners opening up for better top-end HP (shorter runners). It uses Ionger runners on the intake manifold for better low end torque for regular driving (below 5k).

What kind of cold air intake is that

@BuckeyeBallistics

2 жыл бұрын

EBAY

@spencercleland4520

2 жыл бұрын

@@BuckeyeBallistics that's the brand?

@BuckeyeBallistics

2 жыл бұрын

On ebay they sell "no name" aka no brand items. A lot of these intakes are just made by guys in their shops with no business affiliation, thus no brand name, and then sold on ebay. If you skim the comments section I have posted a direct link to it twice now as per requested if you want to see it...