Fiber glass and resin over that IDC how many holes fiber glass over it primer sealer than primer over ofc after sanding in between
@masterlup Жыл бұрын
Why did you not make a body buck, spray foam, fiberglass ...?
@_Volkhunter_ Жыл бұрын
Hell ya man. You did a great job on that spoiler!!
@ricardomaldini6508 Жыл бұрын
Does this drone?
@camriondorling83 Жыл бұрын
Is that Connor crib
@seanweiss46472 жыл бұрын
Are you really wet sanding without a block?
@seanweiss46472 жыл бұрын
You should have also used a darker primer if you're going to paint it black it'll make the color look deeper.
@seanweiss46472 жыл бұрын
And should halfway overlap each pass wheb you spray
@seanweiss46472 жыл бұрын
And spray only in one durection
@owood52432 жыл бұрын
Just spray the foam slower (pull trigger less than half way) will help eliminate the size of the air pockets. Spraying with trigger fully pulled will introduce more air.
@anoniemanoniem51142 жыл бұрын
Why using a explosion out of a war you fucking idiot
@Ryanbaggarly2 жыл бұрын
What are the products are using
@kennethjohnson78932 жыл бұрын
Just what I needed. Working on my broken scooter plastics
@johnnycashh71482 жыл бұрын
Been doing some searching...yours came out really nice!! Thanks for sharing!! 🤘🍻
@Doomknight862 жыл бұрын
You sound like tom holland
@skylinekid4life2 жыл бұрын
how is the spoiler secured to the car ?
@skylinekid4life2 жыл бұрын
does any expanding foam just stick to the metal like that? were any screws used to hold the spoiler in place?
@DonisGP2 жыл бұрын
You can use double sided tape to hold it down onto the trunk. Just like most carbon fiber parts they stick onto it with really good double sided tape like 3m
@skylinekid4life2 жыл бұрын
@@DonisGP ok cool cool.. That's for keeping the final product on the car. But while using the expanding foam, is it best to have tape under it? Will the foam damage the paint that is already on the car?
@johnnycashh71482 жыл бұрын
@@skylinekid4life I think I'm going to try this. I'm going to add to the factory tail I already have so I'm going to go directly to the tail and fiberglass over the top to give it the strength. No need to 3M anything down for mine. We'll see what happens!
@babyreps3652 жыл бұрын
@@johnnycashh7148 some self taping screws sticking up and inch or so then spray the foam works like little anchors
@_Volkhunter_ Жыл бұрын
I used aluminum foil modled over my stock duck bill and them foamed it and let it dry to catch the full shape of my spoiler fin and the aluminum foil allows you to remove it with out sticking to every thing
@DJFunkyNutti2 жыл бұрын
Great video. If i put fibreglass on outside am i not just going to sand the fibregrass away when trying to flatten contours? Confused as to why im putting it on in the first place? Any help appreciated.
@w0ckhardtt6 ай бұрын
gap filling, let resin pool on outside of crack and then fill it all in shave it off and voila no bondo needed to fill the crack and then u can use ur bondo do shape the kit
@ayroyal07912 жыл бұрын
Beautiful car. Useful video for checking out the bracket issue.
@frajolagarage86873 жыл бұрын
Muito bom seu vídeo, sou brasileiro e vou fazer no meu, tenho um volksvagem Voyage G5
@GenerationNoise3 жыл бұрын
well this was pointless.....video should of said how to spray foam on a trunk ....you showed us nothing lmao
@yourmother9246 Жыл бұрын
I agree 👍 And the application of the foam is way too fast and very haphazardly aswell.
@GenerationNoise3 жыл бұрын
so nots how it mde its hey its madelook at this....pointless vid
@GMak813 жыл бұрын
Looks like Ipswich buh.
@garydeandeery3 жыл бұрын
Did mine too
@Quli3n3 жыл бұрын
What type of laquer do you use to seal it down? Also awesome video mate it helped tremendously !
@adamtodd89073 жыл бұрын
Always use axle stands!
@garethcartwright72393 жыл бұрын
Do mine if you like
@garydeandeery3 жыл бұрын
share.icloud.com/photos/0IwN0yjBEsR6m4DWpznqwANRg
@beyondthelol3 жыл бұрын
if its a just a track car you should have just gone with the whole mx5
@beyondthelol3 жыл бұрын
But before that, heres RAID SHADOW LEGENDS
@s9intvfx3 жыл бұрын
Can you do a tutorial on how you masked out the sun
@garydeandeery3 жыл бұрын
Iv got a picture I did if you want it
@garydeandeery3 жыл бұрын
share.icloud.com/photos/0TyEyyKqQdq79zwOKoJ9AS8UA
@TheDiaryOfNothando3 жыл бұрын
Nice work dude, but your Polyester Resin to MEKP Ratio is a bit much. I would advice any one who is using Polyester Resin for the first time, just use the ratio of 1 part MEKP per 50 parts Polyester Resin. It takes a bit longer to cure, but its safer and stronger. The hotter the resin mix and the faster warms up and cools down, the more cracks its gonna have during the curing process. Oh and this Ratio is recommended at room temperature.
@Ambassadorkenny4 жыл бұрын
I lost it at "imma loser" lolol
@maskpals-videosforkids49704 жыл бұрын
How did this hold up? Also, is it heavy?
@user-ss6hj7ee7m4 жыл бұрын
Rising sun flag = nazi flag
@alvinmosqueda1794 жыл бұрын
what do you call that blue thing on the side to help the bumper to fit
@imtrixwizzknowit15202 жыл бұрын
wondering this aswell
@TheCleanliness4 жыл бұрын
Quality video this mate 😂
@rustinblurete50404 жыл бұрын
Moulding clay is more easy to work on.. plus less mess
@brunooncalves4 жыл бұрын
What's the radeador's mark?
@Crazzyboy144 жыл бұрын
Hey where did you buy that expanding foam from ? Can you please post a link ?
@NangsUS4 жыл бұрын
You can just buy it home depot 😁
@Crazzyboy144 жыл бұрын
Anthony Beaz have you seen it there before ? I never did
@NangsUS4 жыл бұрын
Crazyboy15 it's a brand called Good Stuff
@treboy953 жыл бұрын
Or Amazon for 5$
@GenerationNoise3 жыл бұрын
really ...wal mart , home depot . running's , harbor freight , family dollar .....probably even the grocery store ....you get my point . Its not hard to find lmao
@jaredrodenas5874 жыл бұрын
siiiick work but MASKS are definitely something you should wear!
@lewisellison83194 жыл бұрын
It looks good, I wouldn't mind getting one of these myself so keep us all updated as to how it goes
@orgaloggunter914 жыл бұрын
OMG..... It's like walking around shouting "HaXX Hitler." Japanese Rising Sun flag is the same as the Nazi hakenkreuz in Germany. www.kjclub.com/data/exc_board_9/2018/10/08/1538970149_67a6035999d0ba177e33f581f6116dd3.jpg
@08001495 жыл бұрын
nice job
@DesertOctane5 жыл бұрын
Ducktail is looking good!
@boostedbutbroken5 жыл бұрын
Thanks Man, you just wait until the next episode!
@DesertOctane5 жыл бұрын
boostedbutbroken look forward to it keep it up 🙌
@ThatMint2405 жыл бұрын
First!
@EPICorWHAT5 жыл бұрын
how much was your unit a month? looking at getting one soon just nothing available around where i am in mansfield near nottinghamshie and there all expensive
@boostedbutbroken5 жыл бұрын
Ours is pretty expensive also but we share it which makes it easier on the pocket
@butters_5 жыл бұрын
When’s it getting dynod/tuned
@eletor5 жыл бұрын
That looks really good, nice work!
@KUTSARM5 жыл бұрын
Nice video:D Keep up good work:)
@boostedbutbroken5 жыл бұрын
Cheers bro i appreciate it!
@EPICorWHAT5 жыл бұрын
hi mate, im in the process of selling my SR20 from my 13 and getting a rb25, can i make the sr box fit or do i have to get a Rb manual box, and also will the drive shaft fit or will i have to get another cheers
@boostedbutbroken5 жыл бұрын
Hi Dude qwlxome to the channel, i would sell the SR Gearbox and get the rb box because of the extra torque from the rb25. With the driveshaft mine had to be shortened by around 2 inches but ti depends on your diff combo because i have a S14 VLSD. Hope this helps!
@DeactivationNation5 жыл бұрын
You should get a better mic or do subtitles when it’s to quiet to hear clearly
@boostedbutbroken5 жыл бұрын
I agree bro, we are working on a better camera the supports a shotgun mic or the ones you clip to your shirt :) Edit: I have just ordered a Lapel microphone ;)
@WeJoe005 жыл бұрын
I've just found your channel through your bumper repair video and I like it! Sucks to see you've cracked it again already here in this one. But I bet you've already fixed it again. Anyways, hello from Texas!
@boostedbutbroken5 жыл бұрын
Yeah dude a speedbump took it out this time :'( i havent fixed it because im going to get a polyurethane one, aka no cracking! Haha Hello from the UK!
Пікірлер
Fiber glass and resin over that IDC how many holes fiber glass over it primer sealer than primer over ofc after sanding in between
Why did you not make a body buck, spray foam, fiberglass ...?
Hell ya man. You did a great job on that spoiler!!
Does this drone?
Is that Connor crib
Are you really wet sanding without a block?
You should have also used a darker primer if you're going to paint it black it'll make the color look deeper.
And should halfway overlap each pass wheb you spray
And spray only in one durection
Just spray the foam slower (pull trigger less than half way) will help eliminate the size of the air pockets. Spraying with trigger fully pulled will introduce more air.
Why using a explosion out of a war you fucking idiot
What are the products are using
Just what I needed. Working on my broken scooter plastics
Been doing some searching...yours came out really nice!! Thanks for sharing!! 🤘🍻
You sound like tom holland
how is the spoiler secured to the car ?
does any expanding foam just stick to the metal like that? were any screws used to hold the spoiler in place?
You can use double sided tape to hold it down onto the trunk. Just like most carbon fiber parts they stick onto it with really good double sided tape like 3m
@@DonisGP ok cool cool.. That's for keeping the final product on the car. But while using the expanding foam, is it best to have tape under it? Will the foam damage the paint that is already on the car?
@@skylinekid4life I think I'm going to try this. I'm going to add to the factory tail I already have so I'm going to go directly to the tail and fiberglass over the top to give it the strength. No need to 3M anything down for mine. We'll see what happens!
@@johnnycashh7148 some self taping screws sticking up and inch or so then spray the foam works like little anchors
I used aluminum foil modled over my stock duck bill and them foamed it and let it dry to catch the full shape of my spoiler fin and the aluminum foil allows you to remove it with out sticking to every thing
Great video. If i put fibreglass on outside am i not just going to sand the fibregrass away when trying to flatten contours? Confused as to why im putting it on in the first place? Any help appreciated.
gap filling, let resin pool on outside of crack and then fill it all in shave it off and voila no bondo needed to fill the crack and then u can use ur bondo do shape the kit
Beautiful car. Useful video for checking out the bracket issue.
Muito bom seu vídeo, sou brasileiro e vou fazer no meu, tenho um volksvagem Voyage G5
well this was pointless.....video should of said how to spray foam on a trunk ....you showed us nothing lmao
I agree 👍 And the application of the foam is way too fast and very haphazardly aswell.
so nots how it mde its hey its madelook at this....pointless vid
Looks like Ipswich buh.
Did mine too
What type of laquer do you use to seal it down? Also awesome video mate it helped tremendously !
Always use axle stands!
Do mine if you like
share.icloud.com/photos/0IwN0yjBEsR6m4DWpznqwANRg
if its a just a track car you should have just gone with the whole mx5
But before that, heres RAID SHADOW LEGENDS
Can you do a tutorial on how you masked out the sun
Iv got a picture I did if you want it
share.icloud.com/photos/0TyEyyKqQdq79zwOKoJ9AS8UA
Nice work dude, but your Polyester Resin to MEKP Ratio is a bit much. I would advice any one who is using Polyester Resin for the first time, just use the ratio of 1 part MEKP per 50 parts Polyester Resin. It takes a bit longer to cure, but its safer and stronger. The hotter the resin mix and the faster warms up and cools down, the more cracks its gonna have during the curing process. Oh and this Ratio is recommended at room temperature.
I lost it at "imma loser" lolol
How did this hold up? Also, is it heavy?
Rising sun flag = nazi flag
what do you call that blue thing on the side to help the bumper to fit
wondering this aswell
Quality video this mate 😂
Moulding clay is more easy to work on.. plus less mess
What's the radeador's mark?
Hey where did you buy that expanding foam from ? Can you please post a link ?
You can just buy it home depot 😁
Anthony Beaz have you seen it there before ? I never did
Crazyboy15 it's a brand called Good Stuff
Or Amazon for 5$
really ...wal mart , home depot . running's , harbor freight , family dollar .....probably even the grocery store ....you get my point . Its not hard to find lmao
siiiick work but MASKS are definitely something you should wear!
It looks good, I wouldn't mind getting one of these myself so keep us all updated as to how it goes
OMG..... It's like walking around shouting "HaXX Hitler." Japanese Rising Sun flag is the same as the Nazi hakenkreuz in Germany. www.kjclub.com/data/exc_board_9/2018/10/08/1538970149_67a6035999d0ba177e33f581f6116dd3.jpg
nice job
Ducktail is looking good!
Thanks Man, you just wait until the next episode!
boostedbutbroken look forward to it keep it up 🙌
First!
how much was your unit a month? looking at getting one soon just nothing available around where i am in mansfield near nottinghamshie and there all expensive
Ours is pretty expensive also but we share it which makes it easier on the pocket
When’s it getting dynod/tuned
That looks really good, nice work!
Nice video:D Keep up good work:)
Cheers bro i appreciate it!
hi mate, im in the process of selling my SR20 from my 13 and getting a rb25, can i make the sr box fit or do i have to get a Rb manual box, and also will the drive shaft fit or will i have to get another cheers
Hi Dude qwlxome to the channel, i would sell the SR Gearbox and get the rb box because of the extra torque from the rb25. With the driveshaft mine had to be shortened by around 2 inches but ti depends on your diff combo because i have a S14 VLSD. Hope this helps!
You should get a better mic or do subtitles when it’s to quiet to hear clearly
I agree bro, we are working on a better camera the supports a shotgun mic or the ones you clip to your shirt :) Edit: I have just ordered a Lapel microphone ;)
I've just found your channel through your bumper repair video and I like it! Sucks to see you've cracked it again already here in this one. But I bet you've already fixed it again. Anyways, hello from Texas!
Yeah dude a speedbump took it out this time :'( i havent fixed it because im going to get a polyurethane one, aka no cracking! Haha Hello from the UK!