@@grtbgf I found them quite clunky yes, not sure whether it was because the bike was somewhat new but it is in no way a sporty gearbox
@pablosandepena878622 күн бұрын
Does the bike power wheelie in 2nd gear with that setup?
@bikepipes21 күн бұрын
Yes it does. Since then I remapped the ECU and opened up the air box and oh boy... Power wheelie in 2nd gear is now an understatement, it pulls so hard you could flip it by just keeping it full throttle
@pablosandepena878621 күн бұрын
@@bikepipes wow! Could you give me more details please? Which ECU flash did you go for? Did you decat? Thanks mate!! 🤟🏻🤟🏻
@bikepipes21 күн бұрын
@@pablosandepena8786 I sent my ECU to NRBike in the south of France. I told them my bike setup (which slip-on, decat or not etc...) and they tuned it accordingly, the results is mega! I didn't decat, I feel like the bike is loud enough as is and I use it everyday to go to work so I don't want to be obnoxiously loud. I changed the air filter for a BMC one and changed the air box cover with a MWR open plate. The air intake sound is great, the torque down low is much much more aggressive and the rev limiter has been pushed by 200rpm. Also I have a 15-tooth front sprocket, which to me is the single best mod you can do on your bike, i did that as soon as I got the bike. Hope it helps! Cheers ✌️
@pablosandepena878613 күн бұрын
@@bikepipes Thank you for the detailed answer! I would love to see a vid with all those mods in <3
@bikepipes12 күн бұрын
@@pablosandepena8786 no problem! I'll try to make a video soon
@eigusteeenАй бұрын
nice
@bikepipesАй бұрын
Thanks!
@PhilippeDulotАй бұрын
Je trouve l'échappement d'origine tellement beau 😊 Dommage de le changer 😅
@leonsiegert5103Ай бұрын
Hi, how did you record the sound with the H1N? can you post your setup in here? I'm struggling with wind noise when I'm riding with a fanny pack, can you give some advise here?
@bikepipesАй бұрын
Hey, I also struggled for a while finding the right setup. What I do is: - Running type fanny pack that I wear on my lower back - Deadcat windscreen on the mic - Mic sensibility set to 6-7 - Mic pointing towards the exhaust Hope that helps!
@leonsiegert5103Ай бұрын
@@bikepipes I will try that for the next time. Thank you
@kamailworkshopАй бұрын
Gazzzz ✊
@gyandras12 ай бұрын
kzread.info/dash/bejne/ZYNh0NuMnay_ds4.html ?
@ethandussome60852 ай бұрын
can you put the stock passenger pegs with this exhaust on?
@bikepipes2 ай бұрын
Yes no problem at all
@carraujilen2 ай бұрын
Je suis pas le seul à avoiner apres le feu de Mondon. Putain je veux cette moto, d'ici 2 semaines normalement 🤞 Échappement d'origine ?! Me rappelle pas d'un si beau son quand javais testé 🥰
@bikepipes2 ай бұрын
C'est trop tentant avec le dos d'âne ! T'y passes souvent ? On s'est peut-être déjà croisé. Échappement d'origine oui, après le micro est placé idéalement, à savoir en bas de mon dos en pointant vers la droite, donc ça peut légèrement amplifier le son
@carraujilen2 ай бұрын
@@bikepipes Mes parents habitent à Launac, je suis du coin. Maintenant j'habite à Toulouse et je joue au foot à Daux. DOnc j'y passe assez souvent ouais. Un SMCR bleu si jamais ;)
@bikepipes2 ай бұрын
@@carraujilen ça marche je fais Saint Paul - Blagnac tous les jours moi, je te ferai signe si je te croise, et du coup un SMT bientôt du coup, tu vas te régaler
@PhilSch152 ай бұрын
Dude it's a pleasure watching you ride. Thumbs up.
@bikepipes2 ай бұрын
Thanks a lot mate I really appreciate it! ✌️
@nicoloattorni74442 ай бұрын
Ciao!!suono fantastico 😎 volevo chiederti ma lo stivale tocca sullo scarico adesso che l'hai cambiato?grazie
@bikepipes2 ай бұрын
Ciao ! Grazie !! To be honest the pipe design is very good and is bent such as it stands as far away from your foot as possible. I only touched my boot twice by mistake but other than that I never had an issue with it, and I wear shoes in 46!
@nicoloattorni74442 ай бұрын
@@bikepipesok grazie mille..allora penso che sia una soluzione montando questo scarico..perché con l'originale nn riesco a mettere bene il piede in posizione quando mi piego a sinistra..
@bikepipes2 ай бұрын
@@nicoloattorni7444 yes I had the same issue with the standard exhaust and this slip-on fixed that problem. Out of all the exhausts available I think it is the one giving you the most clearance for your foot
@nicoloattorni74442 ай бұрын
Grazieee ✊️✊️
@nickmadden75043 ай бұрын
I wish we had roads like that 😢
@Helmut37633 ай бұрын
do you have problems with the lean angle when cornering? Does the pipes or flap control touch the ground in courves?
@bikepipes3 ай бұрын
It is not my bike but my mate has no problem at all leaning it all the way, he's very quick with that bike and has no problem scraping pegs, exhaust or other 🙂
@michelvicentabukatuka11673 ай бұрын
What model of terminal do you fit???
@bikepipes3 ай бұрын
What do you mean by terminal?
@michelvicentabukatuka11673 ай бұрын
Sorry i translate by italian 😅 muffler
@bikepipes3 ай бұрын
@@michelvicentabukatuka1167 No problem mate! The bike was fitted with the stock muffler
@user-us7vl4yq3c3 ай бұрын
Perfekt:-)))
@user-vj9nd3hf9v3 ай бұрын
Sounds amazing that grunty deep growl is what a proper exhaust should sound like. Can't wait to get my 2017 690 this week.
@bikepipes3 ай бұрын
You'll love it man, amazing bike!
@user-vj9nd3hf9v3 ай бұрын
@@bikepipes Thank you upgrading from an r3, will the ride and power be very noticeable I ride more street commute to work, back roads ?
@bikepipes3 ай бұрын
@@user-vj9nd3hf9v Absolutely mate, the 690 pulls hard from down low and the power up top is vey nice, especially considering how light the bike is
@user-vj9nd3hf9v3 ай бұрын
@@bikepipes Just got the bike and love it only a few things that takes some getting used too. 1) The kickstands design and function on this bike makes me feel like its going to tip over lol. I am sitting on it and I am contemplating how I get off the bike once I find the kickstand and use it ? 2) This girl shakes and boggs anytime I am under 4k rpms. Some people just deal with it and others say that an o2 dongle makes a world of difference to curve the bogging at lower rpms. Have you had any issues with that ?
@bikepipes3 ай бұрын
@@user-vj9nd3hf9v The kickstand makes the bike sit quite upright indeed, never had particular issues with that but you're right, it's not leaning much. As for the bogging at low RPMs, this is what I did: - First and foremost, I switched the front sprocket for a 15-tooth one, instead of 16. This makes the bike so much more enjoyable at low RPM and makes it much more punchy overall. Costs 30€/$ - I decated mine which with a leovince decat which also made it much more "gentle" at low RPMs. (No remap) I would advise to add the KevO2 mod when doing this so that you ensure your bike isn't running too lean. These few changes transform the bike to what it should've been out of the factory
@rutikd17774 ай бұрын
We want more shorts from your channel 🤝🔥
@bikepipes4 ай бұрын
I'll try posting more mate, thanks for the support 💪
@messerschmitt37254 ай бұрын
i know nothing about this kind of bikes but, it is all in the hands like those scooters such as 125cc kymco where everything is on the hands, or it still have those pedals to change gears and stuff, ?
@bikepipes4 ай бұрын
It's a proper motorcycle, meaning you have to shift gears with your left foot (up and down), rear brake on your right foot, front brake on your right hand and clutch on your left hand. Hope it helps!
@messerschmitt37254 ай бұрын
@@bikepipes ohhh. i see, i hope some brand someday make this kind of bikes like motocross but just using left and ride hand... just a dream, Thank you for answer me
@bikepipes4 ай бұрын
@@messerschmitt3725 Honda do make bikes like this mate, it's called the DCT gearbox, they have a couple of models (750cc and 1100cc) using this, and you don't need to shift gears anymore!
@messerschmitt37254 ай бұрын
@@bikepipes DANKE BUDDY!!!!
@Hasimas_YTB4 ай бұрын
What the tires ?
@bikepipes4 ай бұрын
Continental Contiroad, well happy with these!
@Hasimas_YTB4 ай бұрын
@@bikepipes okay thx u !
@adrianrubi50124 ай бұрын
Sounds great for stock pipes!
@bikepipes4 ай бұрын
Not too shabby indeed, but a slip-on would definitely make her sing!
@walhack22975 ай бұрын
Hello, we have to do a mapping with the complete line ? Thanks
@bikepipes5 ай бұрын
Hi, it is recommended to remap the bike with the full exhaust although I hadn't done it initially and it ran just fine. A year after doing the full exhaust I decided to open up the air box so then I had to remap it
@walhack22975 ай бұрын
@@bikepipes thanks
@dedelabinouze51105 ай бұрын
Ce timing impeccable au feu de mondonville 👌
@bikepipes5 ай бұрын
Un local 😉 tout était calculé !
@271086antonio5 ай бұрын
Hi nice video! Gopro? Setting and position?? :) Thanks
@bikepipes5 ай бұрын
Thank you! GoPro Hero 8 black, 4k, 24fps, superview with a PolarPro ND filter clipped on. The GoPro is mounted on my helmet using a chin mount
@271086antonio5 ай бұрын
thank you for the answer!@@bikepipes
@teunbockting41745 ай бұрын
Bro can ride
@enosmn5 ай бұрын
that was nice to watch. felt like i was riding too
@bikepipes5 ай бұрын
Thanks a lot I really appreciate it, glad you enjoyed it! ✌️
@888jackflash5 ай бұрын
De-cat pipe? ECU flash?
@bikepipes5 ай бұрын
No decat, no remap, just a slip-on
@888jackflash5 ай бұрын
Wow, sounds pretty good then! But hard to tell from the video how LOUD it really is... Can you keep it quiet in town? Where I live, the police give out big fines.@@bikepipes
@bikepipes5 ай бұрын
@@888jackflash to be honest it is not that loud, just loud enough so that you notice it but not obnoxious. The mic makes it sound a bit louder than it is
@888jackflash5 ай бұрын
Pretty countryside. One thing different here in the US - too many DEER. The pop out everywhere.
@Retardinspector5 ай бұрын
Thats not RAW SOUND, thats PURE TRASH
@bikepipes5 ай бұрын
Wow your opinion means so much too me, lol
@jejdimjeremy71795 ай бұрын
Hey ✌️c’est quel support de téléphone que tu as ?
@bikepipes5 ай бұрын
Salut! Un support vraiment basique sur Amazon de la marque Grefay, ça fait 3 ans que je l'ai et il a pas bougé
@jejdimjeremy71795 ай бұрын
@@bikepipessuper merci 😊
@iodineclip5 ай бұрын
wonderful bike on equally wonderful road, i envy you having such a great time.
@wiadrozaurusflex43735 ай бұрын
that's wild
@UserLeon19906 ай бұрын
Hey mate, great work! Where did you put your microphone for a crisp sound like that?
@bikepipes6 ай бұрын
Thanks a lot mate! I put the mic in a fanny pack that I wear in my back, works like a charm
@MotoRamosVlogs6 ай бұрын
How do you avoid the Wind noise?
@bikepipes6 ай бұрын
I place my microphone in a fanny pack that I wear on my back
@MotoRamosVlogs6 ай бұрын
@@bikepipes Thanks for the tip! I’ll try it! I’ll start talking on my videos so I was looking so much for this. Please have a look and any advice would be pure love. Thanks!
@kikefelgueroso85026 ай бұрын
Broooooo sounds insane! Thank you for the video
@bikepipes6 ай бұрын
No worries mate ✌️
@kikefelgueroso85026 ай бұрын
Hey bro! Love the sound of your Dominator, looking to get one for my bike as well. Is there any way you could record a fly by to see how it sounds from the outside to other people? I would appreciate it a lot! Thank you in advance
@bikepipes6 ай бұрын
Thanks a lot mate! I just uploaded a short showing a fly by, it's not the best quality but it is the only fly by video I have, hope it helps. kzread.infoi3YGXWOjPWQ?si=mKOwDbeDE4_jh4i_
@mardelplatalimousines34236 ай бұрын
Magnifique essai ultra complet, merci!
@Ibazor6 ай бұрын
serious skills
@bikepipes4 ай бұрын
Thanks a lot mate ✌️
@skywave44966 ай бұрын
Due to the nature of the CP4 engine, the sound does not improve even if replaced with another tuned muffler. In the end, it is better to stick to the original muffler and not waste money.
@bikepipes6 ай бұрын
It does sound good with the stock muffler. I feel like a decat could really unleash the aggressiveness but it might be a bit loud
@FZ1Nightrider6 ай бұрын
Not true, i have an sc project crt with the cat still there and the sound has improved from the stock muffler, not so much but still worth it for me..
@lukataggert86162 ай бұрын
@@FZ1Nightrider Would you say it's louder with the CRT muffler with the stock cats?
@FZ1Nightrider2 ай бұрын
@@lukataggert8616 definetely louder, but don't expect the extremely loud sound that would be with a decat system of course
@lukataggert86162 ай бұрын
@@FZ1Nightrider Yeah good to know thanks for letting me know! Trying to find a balance of noise between quiet and loud can be hard haha
@projectg4086 ай бұрын
That’s a tasty sounded bike
@bighitjumper6 ай бұрын
Where is this road? Looks amazing!
@bikepipes6 ай бұрын
It is amazing! It is next to Quillan, in the southwest of France, close to Spain
@underworks20246 ай бұрын
Just love the sound the LC8c makes at 8k-9.5k. Sort of reminds me of the distinct drone in the GT4 RS Porsche.
@bikepipes6 ай бұрын
Never thought of it that way but you might be on to something! The sound it makes up top really encourages you to use the whole rev range
@painko63436 ай бұрын
there are too much different with 15-tooth front sprocket? Dominator HP8 slip-on with DB-killer and decat? sounds very good
@bikepipes6 ай бұрын
Quite a big difference with the 15-tooth sprocket fitted, the bike is much more agressive and much easier to handle at low speed, the gearing feels less "awkward". I just have the Dominator slip-on with DB killer, no decat. It does sound good as is, not too loud, just enough 👌
@moviesync31316 ай бұрын
It's obvious you go more than 110 if it's blurred simple observation
@bikepipes6 ай бұрын
No kidding eh
@allnighterist6 ай бұрын
Stock handlebars?
@bikepipes6 ай бұрын
Yes
@motorausch6 ай бұрын
Very cool video! Love the whole vibe. Keep it up!
@bikepipes6 ай бұрын
Thanks very much mate I appreciate it! ✌️
@BlackRecoil6 ай бұрын
where do you place your external mic?
@bikepipes6 ай бұрын
In a fanny pack that I wear backwards, that way it's protected from the wind and it is next to the exhaust
@BlackRecoil6 ай бұрын
@@bikepipes awesome thank you very much
@Banane7566 ай бұрын
Amazing Video & Sound quality. Where did you store the Zoom H1n? :)
@bikepipes6 ай бұрын
Thanks very much! I put the mic inside of a fanny pack that I placed behind my back, it works like a charm
@Banane7566 ай бұрын
@@bikepipes Thank you so much :)
@SonriseSunset6 ай бұрын
Nice sounding pipe! Not even stressing the 890 around curves. A bit weavy wavy you are! But fun video!
@bikepipes6 ай бұрын
Thanks mate!
@adrianoribeiro51076 ай бұрын
How do you brurr the display when the speed increases?
@bikepipes6 ай бұрын
Every time in the video the speed goes above a threshold (~120km/h) I add a blur filter in Adobe Premiere Pro. It is a bit of a pain since I have to scan the whole videos and add several filters but it works well
Пікірлер
are the shifts really that clunky?
@@grtbgf I found them quite clunky yes, not sure whether it was because the bike was somewhat new but it is in no way a sporty gearbox
Does the bike power wheelie in 2nd gear with that setup?
Yes it does. Since then I remapped the ECU and opened up the air box and oh boy... Power wheelie in 2nd gear is now an understatement, it pulls so hard you could flip it by just keeping it full throttle
@@bikepipes wow! Could you give me more details please? Which ECU flash did you go for? Did you decat? Thanks mate!! 🤟🏻🤟🏻
@@pablosandepena8786 I sent my ECU to NRBike in the south of France. I told them my bike setup (which slip-on, decat or not etc...) and they tuned it accordingly, the results is mega! I didn't decat, I feel like the bike is loud enough as is and I use it everyday to go to work so I don't want to be obnoxiously loud. I changed the air filter for a BMC one and changed the air box cover with a MWR open plate. The air intake sound is great, the torque down low is much much more aggressive and the rev limiter has been pushed by 200rpm. Also I have a 15-tooth front sprocket, which to me is the single best mod you can do on your bike, i did that as soon as I got the bike. Hope it helps! Cheers ✌️
@@bikepipes Thank you for the detailed answer! I would love to see a vid with all those mods in <3
@@pablosandepena8786 no problem! I'll try to make a video soon
nice
Thanks!
Je trouve l'échappement d'origine tellement beau 😊 Dommage de le changer 😅
Hi, how did you record the sound with the H1N? can you post your setup in here? I'm struggling with wind noise when I'm riding with a fanny pack, can you give some advise here?
Hey, I also struggled for a while finding the right setup. What I do is: - Running type fanny pack that I wear on my lower back - Deadcat windscreen on the mic - Mic sensibility set to 6-7 - Mic pointing towards the exhaust Hope that helps!
@@bikepipes I will try that for the next time. Thank you
Gazzzz ✊
kzread.info/dash/bejne/ZYNh0NuMnay_ds4.html ?
can you put the stock passenger pegs with this exhaust on?
Yes no problem at all
Je suis pas le seul à avoiner apres le feu de Mondon. Putain je veux cette moto, d'ici 2 semaines normalement 🤞 Échappement d'origine ?! Me rappelle pas d'un si beau son quand javais testé 🥰
C'est trop tentant avec le dos d'âne ! T'y passes souvent ? On s'est peut-être déjà croisé. Échappement d'origine oui, après le micro est placé idéalement, à savoir en bas de mon dos en pointant vers la droite, donc ça peut légèrement amplifier le son
@@bikepipes Mes parents habitent à Launac, je suis du coin. Maintenant j'habite à Toulouse et je joue au foot à Daux. DOnc j'y passe assez souvent ouais. Un SMCR bleu si jamais ;)
@@carraujilen ça marche je fais Saint Paul - Blagnac tous les jours moi, je te ferai signe si je te croise, et du coup un SMT bientôt du coup, tu vas te régaler
Dude it's a pleasure watching you ride. Thumbs up.
Thanks a lot mate I really appreciate it! ✌️
Ciao!!suono fantastico 😎 volevo chiederti ma lo stivale tocca sullo scarico adesso che l'hai cambiato?grazie
Ciao ! Grazie !! To be honest the pipe design is very good and is bent such as it stands as far away from your foot as possible. I only touched my boot twice by mistake but other than that I never had an issue with it, and I wear shoes in 46!
@@bikepipesok grazie mille..allora penso che sia una soluzione montando questo scarico..perché con l'originale nn riesco a mettere bene il piede in posizione quando mi piego a sinistra..
@@nicoloattorni7444 yes I had the same issue with the standard exhaust and this slip-on fixed that problem. Out of all the exhausts available I think it is the one giving you the most clearance for your foot
Grazieee ✊️✊️
I wish we had roads like that 😢
do you have problems with the lean angle when cornering? Does the pipes or flap control touch the ground in courves?
It is not my bike but my mate has no problem at all leaning it all the way, he's very quick with that bike and has no problem scraping pegs, exhaust or other 🙂
What model of terminal do you fit???
What do you mean by terminal?
Sorry i translate by italian 😅 muffler
@@michelvicentabukatuka1167 No problem mate! The bike was fitted with the stock muffler
Perfekt:-)))
Sounds amazing that grunty deep growl is what a proper exhaust should sound like. Can't wait to get my 2017 690 this week.
You'll love it man, amazing bike!
@@bikepipes Thank you upgrading from an r3, will the ride and power be very noticeable I ride more street commute to work, back roads ?
@@user-vj9nd3hf9v Absolutely mate, the 690 pulls hard from down low and the power up top is vey nice, especially considering how light the bike is
@@bikepipes Just got the bike and love it only a few things that takes some getting used too. 1) The kickstands design and function on this bike makes me feel like its going to tip over lol. I am sitting on it and I am contemplating how I get off the bike once I find the kickstand and use it ? 2) This girl shakes and boggs anytime I am under 4k rpms. Some people just deal with it and others say that an o2 dongle makes a world of difference to curve the bogging at lower rpms. Have you had any issues with that ?
@@user-vj9nd3hf9v The kickstand makes the bike sit quite upright indeed, never had particular issues with that but you're right, it's not leaning much. As for the bogging at low RPMs, this is what I did: - First and foremost, I switched the front sprocket for a 15-tooth one, instead of 16. This makes the bike so much more enjoyable at low RPM and makes it much more punchy overall. Costs 30€/$ - I decated mine which with a leovince decat which also made it much more "gentle" at low RPMs. (No remap) I would advise to add the KevO2 mod when doing this so that you ensure your bike isn't running too lean. These few changes transform the bike to what it should've been out of the factory
We want more shorts from your channel 🤝🔥
I'll try posting more mate, thanks for the support 💪
i know nothing about this kind of bikes but, it is all in the hands like those scooters such as 125cc kymco where everything is on the hands, or it still have those pedals to change gears and stuff, ?
It's a proper motorcycle, meaning you have to shift gears with your left foot (up and down), rear brake on your right foot, front brake on your right hand and clutch on your left hand. Hope it helps!
@@bikepipes ohhh. i see, i hope some brand someday make this kind of bikes like motocross but just using left and ride hand... just a dream, Thank you for answer me
@@messerschmitt3725 Honda do make bikes like this mate, it's called the DCT gearbox, they have a couple of models (750cc and 1100cc) using this, and you don't need to shift gears anymore!
@@bikepipes DANKE BUDDY!!!!
What the tires ?
Continental Contiroad, well happy with these!
@@bikepipes okay thx u !
Sounds great for stock pipes!
Not too shabby indeed, but a slip-on would definitely make her sing!
Hello, we have to do a mapping with the complete line ? Thanks
Hi, it is recommended to remap the bike with the full exhaust although I hadn't done it initially and it ran just fine. A year after doing the full exhaust I decided to open up the air box so then I had to remap it
@@bikepipes thanks
Ce timing impeccable au feu de mondonville 👌
Un local 😉 tout était calculé !
Hi nice video! Gopro? Setting and position?? :) Thanks
Thank you! GoPro Hero 8 black, 4k, 24fps, superview with a PolarPro ND filter clipped on. The GoPro is mounted on my helmet using a chin mount
thank you for the answer!@@bikepipes
Bro can ride
that was nice to watch. felt like i was riding too
Thanks a lot I really appreciate it, glad you enjoyed it! ✌️
De-cat pipe? ECU flash?
No decat, no remap, just a slip-on
Wow, sounds pretty good then! But hard to tell from the video how LOUD it really is... Can you keep it quiet in town? Where I live, the police give out big fines.@@bikepipes
@@888jackflash to be honest it is not that loud, just loud enough so that you notice it but not obnoxious. The mic makes it sound a bit louder than it is
Pretty countryside. One thing different here in the US - too many DEER. The pop out everywhere.
Thats not RAW SOUND, thats PURE TRASH
Wow your opinion means so much too me, lol
Hey ✌️c’est quel support de téléphone que tu as ?
Salut! Un support vraiment basique sur Amazon de la marque Grefay, ça fait 3 ans que je l'ai et il a pas bougé
@@bikepipessuper merci 😊
wonderful bike on equally wonderful road, i envy you having such a great time.
that's wild
Hey mate, great work! Where did you put your microphone for a crisp sound like that?
Thanks a lot mate! I put the mic in a fanny pack that I wear in my back, works like a charm
How do you avoid the Wind noise?
I place my microphone in a fanny pack that I wear on my back
@@bikepipes Thanks for the tip! I’ll try it! I’ll start talking on my videos so I was looking so much for this. Please have a look and any advice would be pure love. Thanks!
Broooooo sounds insane! Thank you for the video
No worries mate ✌️
Hey bro! Love the sound of your Dominator, looking to get one for my bike as well. Is there any way you could record a fly by to see how it sounds from the outside to other people? I would appreciate it a lot! Thank you in advance
Thanks a lot mate! I just uploaded a short showing a fly by, it's not the best quality but it is the only fly by video I have, hope it helps. kzread.infoi3YGXWOjPWQ?si=mKOwDbeDE4_jh4i_
Magnifique essai ultra complet, merci!
serious skills
Thanks a lot mate ✌️
Due to the nature of the CP4 engine, the sound does not improve even if replaced with another tuned muffler. In the end, it is better to stick to the original muffler and not waste money.
It does sound good with the stock muffler. I feel like a decat could really unleash the aggressiveness but it might be a bit loud
Not true, i have an sc project crt with the cat still there and the sound has improved from the stock muffler, not so much but still worth it for me..
@@FZ1Nightrider Would you say it's louder with the CRT muffler with the stock cats?
@@lukataggert8616 definetely louder, but don't expect the extremely loud sound that would be with a decat system of course
@@FZ1Nightrider Yeah good to know thanks for letting me know! Trying to find a balance of noise between quiet and loud can be hard haha
That’s a tasty sounded bike
Where is this road? Looks amazing!
It is amazing! It is next to Quillan, in the southwest of France, close to Spain
Just love the sound the LC8c makes at 8k-9.5k. Sort of reminds me of the distinct drone in the GT4 RS Porsche.
Never thought of it that way but you might be on to something! The sound it makes up top really encourages you to use the whole rev range
there are too much different with 15-tooth front sprocket? Dominator HP8 slip-on with DB-killer and decat? sounds very good
Quite a big difference with the 15-tooth sprocket fitted, the bike is much more agressive and much easier to handle at low speed, the gearing feels less "awkward". I just have the Dominator slip-on with DB killer, no decat. It does sound good as is, not too loud, just enough 👌
It's obvious you go more than 110 if it's blurred simple observation
No kidding eh
Stock handlebars?
Yes
Very cool video! Love the whole vibe. Keep it up!
Thanks very much mate I appreciate it! ✌️
where do you place your external mic?
In a fanny pack that I wear backwards, that way it's protected from the wind and it is next to the exhaust
@@bikepipes awesome thank you very much
Amazing Video & Sound quality. Where did you store the Zoom H1n? :)
Thanks very much! I put the mic inside of a fanny pack that I placed behind my back, it works like a charm
@@bikepipes Thank you so much :)
Nice sounding pipe! Not even stressing the 890 around curves. A bit weavy wavy you are! But fun video!
Thanks mate!
How do you brurr the display when the speed increases?
Every time in the video the speed goes above a threshold (~120km/h) I add a blur filter in Adobe Premiere Pro. It is a bit of a pain since I have to scan the whole videos and add several filters but it works well
@@bikepipes thanks.
Modo Fantasma ativado com sucesso 🔥🚀