Пікірлер

• 
  @redstar1992 ай бұрын

  Crazy once i put 4 AA batteries in my remote started to smoke

• 
  @jessjoshwyatt35714 ай бұрын

  And now ur foams are gonna be real firm and gonna make ur performance suck more. Good job.

• 
  @NTromb4 ай бұрын

  Not throwing Shade at you, but compressed foam stretched tire way too much if you will preload with the foam on the tire as well as with the foam equals no good for crawling need more sidewall

• 
  @Tony-ib2vm5 ай бұрын

  It's not just mass production debris. The most important factor to form the film on the commutator is humidity. On older nuclear subs after cleaning their commutators, the techs would spray water on the com during break-in/1st start.

• 
  @kloo79965 ай бұрын

  Don't cheep out buy the right tires

• 
  @yrusonoz55745 ай бұрын

  It's not a "cheap out" I don't think I believe it's more for a custom look

• 
  @sammiller84975 ай бұрын

  I get they look cool but hiw do they proform from what I seen it looks as if that would make the tire quite stiff might 6 alright for trail rig not so good for rock crawing

• 
  @dirtrider88 Жыл бұрын

  you need to magnetize your hex driver(s)

• 
  @concretechef9904 Жыл бұрын

  Those rims are good I have em but hard afbto bead anything on the 2.2 rim version

• 
  @edwardperez9833 Жыл бұрын

  Thanks man.

• 
  @matthewscheiper6973 Жыл бұрын

  Great video! Thanks for the help!

• 
  @TribeRc Жыл бұрын

  You bet! Thanks for viewing. #t4l

• 
  @ubreakitirepairit35692 жыл бұрын

  I'm not trying to sound like a dick or anything, but what exactly is the advantage / purpose of this over simply just buying 2.2 tires?

• 
  @TribeRc2 жыл бұрын

  Just to say it was done, and it looks prettt cool

• 
  @ubreakitirepairit35692 жыл бұрын

  @@TribeRc the only thing I could think of that makes any sense doing this, is it gives the tires a low profile look.

• 
  @meirdeaph2 жыл бұрын

  How do they go on the axial? Like thers no hole in the middle?i got the tire together but i dont get how it gies on now

• 
  @TribeRc2 жыл бұрын

  Youll have to remove the center decorative cap from rim prior to install

• 
  @iancruz65082 жыл бұрын

  Does stretching the 1.9 over the 2.2 wheel lessen the Height of the tire after mounting on the larger wheel?

• 
  @TribeRc2 жыл бұрын

  It will shorten the sidewall on 1.9 yes, however dont think youll mind height

• 
  @wordreet2 жыл бұрын

  Yep, rubber stretches. The only minor issue might be that, for a rock crawler at least, the tire will definitely be a bit less flexible.

• 
  @melvindodson79232 жыл бұрын

  After finding this video it convinced me to pull the trigger on getting them. Thank you for such an informative video

• 
  @TribeRc2 жыл бұрын

  Your very welcome. Be sire to hit the subscribe button amd follow the channel. More releases coming in near future.

• 
  @delightedcuttz23412 жыл бұрын

  Sir This the easiest lesson I have seen SALUTE I just bought some 2.2 axial for 1.9 prolines. My favorite sales rep repeated "take your time with these" I aint scared though a lil nervous yes cuz its my first time...Thanks for the video!!!!!

• 
  @TribeRc2 жыл бұрын

  You got this... Thanks for watching.

• 
  @nitrocell92872 жыл бұрын

  so you have to ruin a set of rims. you can never go back with those rims if you dont want the spacers anymore?

• 
  @TribeRc2 жыл бұрын

  I'm pretty sure you can reverse this if you'd like. Thanks for watching #T4L Hit that Subscribe button if you enjoyed the video

• 
  @robertblack73522 жыл бұрын

  Why?

• 
  @TribeRc2 жыл бұрын

  Why not? Thanks for watching #T4L

• 
  @ryandupay40222 жыл бұрын

  I don't like many videos, but I liked this one.

• 
  @TribeRc2 жыл бұрын

  Thanks!

• 
  @mulberry89302 жыл бұрын

  They seem suitable for a sct 4x4

• 
  @TribeRc2 жыл бұрын

  The tread on them could absolutely be SCT Racing..

• 
  @caseihpopper2 жыл бұрын

  Thank you it took three hours for me and I still didn’t do it so I looked on youtube

• 
  @mohaimenkazi97872 жыл бұрын

  Have you heard of zooming?

• 
  @TribeRc2 жыл бұрын

  Thanks for your input.

• 
  @elcavi442 жыл бұрын

  Nice work!

• 
  @TribeRc2 жыл бұрын

  Video coming soon of how they perform. Thanks for watching. Hit that like/share button if you would. #T4L

• 
  @OneofMyTurns2 жыл бұрын

  I did this with a set of 1.9” wheel and touring tires for my 1/10 touring car. They worked perfect.

• 
  @TribeRc2 жыл бұрын

  Nice! #T4L

• 
  @s6ef4enko2 жыл бұрын

  Hey dude, so the performance wasn't hindered by the excess stretching due to the bigger rims? And the weight added contributed to the grip of the tires I'd assume? I'm on the verge of ordering 2.2s for my 1.9 set of tires but wanted to know a bit more on those two aspects. Thanks in advance!

• 
  @TribeRc2 жыл бұрын

  @@s6ef4enko no, the performance wasn't hindered. I mean you don't have as much sidewall give 🤷 but kinda comes with territory. The added weight of the 2.2s does indeed help with down low weight. Hope this helps. Tribe on! #T4L

• 
  @s6ef4enko2 жыл бұрын

  @@TribeRc Thank you so much man! And one last question (forgot to add it to my previous comment) - what about the width? The 2.2" are usually like ~5.5mm, from what I've seen - 26mm on 1.9" rim to 31.5mm on 2.2" rims. Is that an issue when stretching them onto the 1.9" tires? Like they won't buldge sideways?

• 
  @TribeRc2 жыл бұрын

  @@s6ef4enko it does bulge on side alittle but nothing ungodly, I kinda liked the look it presented

• 
  @skycam90852 жыл бұрын

  .. i used (3) longer screws for mounting (deep woods with 110mm donut) until the ring was fixed; put in the rest and replaced the long ones. helps a lot!

• 
  @matkaterbovich15802 жыл бұрын

  After watching this video I now ..Lefty tighty...righty loosey

• 
  @markanthonydelacruz11983 жыл бұрын

  they look like low profile tyres. I might do the same to my tyres. Thanks.

• 
  @winstonoso58213 жыл бұрын

  Will it hurt the motor if u use dawn soap n the water to CV clean it? N what kinda oil or grease u use to lube motor inside?

• 
  @divifo3 жыл бұрын

  Amazing collection of great basher and crawler with very cool skills! Good job 👏😊👍

• 
  @darrylcarpenter9033 жыл бұрын

  Great explanation

• 
  @jeffd.76183 жыл бұрын

  This pack has the charge plug built in so you won’t have to remove anything to charge it. Spektrum 2000 MAh TX DX6/DX7G2 Battery www.amazon.com/dp/B00LMJI34S/ref=cm_sw_r_cp_api_glt_fabc_ZGZP4RK6KYEG0W52HPE0

• 
  @Sassonic3 жыл бұрын

  Is it a direct fit in the dx5?

• 
  @roberttursugian70783 жыл бұрын

  Great video! I just bought my first RC Crawler to pick up a hobby - that looks like a great upgrade or rather an enhancement... I like the way that tire sits on those rims...

• 
  @TribeRc2 жыл бұрын

  Thank you! Enjoy... #T4L

• 
  @vknight73763 жыл бұрын

  I was just thinking about this today and this popped up. Love the video, love the look!! My question is how does it perform for trail crawling? Any way we could see these in action over various obstacles etc?

• 
  @TribeRc3 жыл бұрын

  To be honest bud I did this video and haven't touched anything since. I'm gonna try and get my s&%t back together and do some filming and yes that would be one of the videos I shoot. #T4L

• 
  @vknight73763 жыл бұрын

  @@TribeRc I hope you get back to it. You did a great job with it and I think you could continue to grow your channel since you think outside the normal.

• 
  @TribeRc3 жыл бұрын

  @@vknight7376 thanks! That means alot. You hardly get these comments which makes it hard to want to continue. #T4L

• 
  @Thelegendl233 жыл бұрын

  "Today we're going to talk about the elephant in the room" *Don't talk about yourself man*

• 
  @TribeRc3 жыл бұрын

  Very humorous

• 
  @huangg013 жыл бұрын

  Hi I try to use louise CR-champ 1.9 with 2.2 beadlock rim. Bu I don't know which rim thickness 25/35mm should I pick. Any suggestion?

• 
  @TribeRc3 жыл бұрын

  Not 100% sure on the answer to this but I'd say it's self preference (how wide do you want them to look)

• 
  @huangg013 жыл бұрын

  Hi ~ Any suggestion for loctite? 243 222 242 ?

• 
  @TribeRc3 жыл бұрын

  Blue loctite, wouldn't use red (permanent)

• 
  @huangg013 жыл бұрын

  @@TribeRc ok got it

• 
  @K1llerElite683 жыл бұрын

  Background music is so stupid. Can’t hear the talking to well.

• 
  @OllisRCCars3 жыл бұрын

  Amazing Video👌 I subscribed

• 
  @TribeRc3 жыл бұрын

  Thanks brother #T4L

• 
  @francelagar20613 жыл бұрын

  Cool 😎

• 
  @TribeRc3 жыл бұрын

  Thanks brother. #T4L

• 
  @Alohakoa593 жыл бұрын

  How do you recharge? Take it out every time?

• 
  @TribeRc3 жыл бұрын

  Unfortunately, yes. Thats how I do it.

• 
  @chrisseager96123 жыл бұрын

  That looksreally good man im not very good at tires but im gonna try it

• 
  @TribeRc3 жыл бұрын

  Thanks bro! It's not hard, just alittle Patience. Enjoy

• 
  @snsrcraceway3 жыл бұрын

  So the foams inside are the foams from the 1.9 tires? Did you modify the foams at all

• 
  @TribeRc3 жыл бұрын

  Yes sir, they are from 1.9 tires. No u didn't modify foams just stretch over rim

• 
  @snsrcraceway3 жыл бұрын

  @@TribeRc awesome thanks for the reply!

• 
  @martinneps93873 жыл бұрын

  Would these fit a Blackfoot RC truck please comment back if you should know or not thank you wheels are sharp looking

• 
  @TribeRc3 жыл бұрын

  If the Blackfoot has 12mm hex it should fit

• 
  @martinneps93873 жыл бұрын

  @@TribeRc OK thank you very much and where did you purchase these and what are they called

• 
  @TribeRc3 жыл бұрын

  I wanna say i got them on Amazon. They are not name brand as I'm aware of.

• 
  @polishguywithhardtospellna82273 жыл бұрын

  Just out of curiosity - is the thread lock really needed for wheels, if there is tension provided by squashed rubber? Do the bolts really come undone on the wheels?

• 
  @TribeRc3 жыл бұрын

  Good question.. Ot may or may not be needed, but it doesn't hurt. I guess more of a assurance.

• 
  @skycam90852 жыл бұрын

  .. there is no tension from the rubber, because the rim parts are directly bolted together. not always but in this case especially it´s higly recommended to use glue - you´re not gonna find any of the screws outside if it becomes lose!

• 
  @polishguywithhardtospellna82273 жыл бұрын

  What You need is a little, scaled tyre lever You fool! ha ha ha ha

• 
  @TribeRc3 жыл бұрын

  Bahahahahahahahahah, little worker gnomes

• 
  @butch37153 жыл бұрын

  I've flown R/C craft for decades. The DX5 Pro is my first land based transmitter. Seems damn odd Spektrum wouldn't come up with a simple charging plug located somewhere on the transmitter so its rechargeable battery wouldn't have to be removed each time for charging (menu activated or deactivated depending on which type of battery is used). What I'll probably do is add a 2nd cable and plug parallel the battery cable, and route it through the slot on the bottom for charging.

• 
  @TribeRc3 жыл бұрын

  Thanks! That's a great idea #T4L

• 
  @clifford97703 жыл бұрын

  CREEKSQUAD

• 
  @geraldanthony73244 жыл бұрын

  Yeah this was worth it can't wait to put them on

• 
  @geraldanthony73244 жыл бұрын

  Checked out your video I bought the same set rims and tires excellent look and choice great video 🔥✌🏽👊🏾

• 
  @RCVHX224 жыл бұрын

  Very well done vide and a nice truck's, you have my support👊😉👍#7

• 
  @TribeRc4 жыл бұрын

  This brother! #T4L