Lawn Mower Tire Store
Lawn Mower Tire Store
- 2
- 643 184
Lawn Mower Tire Store takes pride in providing our customers with the highest quality lawn mower tires, wheels, inner tubes, and bearings at the lowest prices! We value our customers above all and have dedicated ourselves to making sure that you receive the correct product in a timely manner.
We offer a wide variety of replacement tires, wheels, inner tubes, and bearings for various lawn and garden equipment, including lawn mowers, pressure washers, generators, and material handling products. We have many replacement sizes available and are constantly adding new items.
With our user-friendly website and quick order turnaround, we hope to make your purchasing experience easy and stress-free. If you have any questions or cannot locate your item, please feel free to use our online chat feature at the top of each page or email us at [email protected].
Also check out out new sister store: www.agtirestore.com. This channel will also feature the new site!
Пікірлер
Instead of cutting the valve stem you could undo the valve core it'll save you some extra money
I’ll have the shop do it for $30 problem solved
CUT OFF THE OLD TIRE, use any circular saw, or grinder, use a good sized pry-tool (dull-rounded), to hold the tire away from the rim... cut the bead Also, use a large CLAMP , to break the bead... no air (hand ones work good) Lastly, use some motor oil around (both sides) of the new tire bead, and STAND on it to put it ONTO the rim, (one side first, clamp, use a rag to clean up the oil later) firmly hold onto something (pole, table) while you stand on it.
Easy 2 day job
MANY THINGS COULD HAVE BEEN EASIER. NOTE AT THE END, MAX PRESSURE IS 22 psi FOR NORMAL OPERATIONS
I used a clamp to hold the original tire iron in place and that really made it easier to get the final rim out of the tire. Thanks for the video!
Yea, you cuss less than I do doing that.
Thank you for the lesson I was getting my ass kicked until I saw this video
Don't clip the valve stem unless you really want to do a new one. A valve removal tool is like 3 bucks and you probably have one laying around on a valve cap of something.
This is weird you never show the part when you use a sawzall to remove the old tire 😂
NIce and calm. No loud music. Kuddos
This helped a lot. Thank you
Did not work for us. As usual, just another video showing something to make it look easy. Even when you have all the tools. 😡
You guys all must be using really soft tires.
Who's here after fighting and cussing with their mower tire? Lol. I'm at the point where the second greasing is applied. It looks as if I will have to use grease. I avoided it because I thought it would be messy and slippery when handling tools but I guess I will have to grease this thing to get the tire back on.
Idk what kinda tires yall use in these instructional videos, but they’re so much more pliable than the tires I’m trying to get off!
Ha ha..that tyres been off. Beads arent that easy...
Very informative
It also helps if you have beefy forearms and biceps like the guy in the video. : )
Dude you should do guided meditations.
Why waste the valve stem?
No bead breaker needed on your job. Mine has bead locks on one side of the rim.
She pronounced it heighth 😂
I expect this mower will last several seasons with decent care. kzread.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
I had a flat on a Sunday .All the tire shops were closed. The Runnings store was open to purchase a new tire . I was able to change I easily. Thanks so much for posting this video.
I set the tire under the jack stand of my ten foot trailer, then I stand on the tongue of the trailer, bounce a little bit, and bead breaks right away.
Damn it , I’ve trying for several years and my freaking tires are still have way mounted , God please take me 😭😭😭
I would guess that you're working with 2-ply tires - 4-ply are more of a bear to mount. Just sayin'...
Thank you for the info. It was very helpful.
Thank you, very helpful. Had the tire changed in no time
It should be noted that some rims lip diameter is slightly different on both sides, usually the side of the rim with the stem will be the smaller lip, and is the side you should remove the old from, and install the new on. If you really struggling getting the tire off or on, try swapping the rim side.
Not on 15x6.00 6
holy crap thank you
thanks I didn't know that
Nice tutorial. Reminds me of the days as a kid when I replaced bike tires.
Great video, in a perfect world this is the way to do it but when you’re wrestling 20 year old tires hard as a rock you can’t quite flip it over the rim like you did so what I suggest using a reciprocating saw and cut the petrified tires off. Just be careful not to cut your fingers off!! Worked for me 😊
Great, someone who knows what they are doing, thanks for the help , first time I changed a tire now to do the other tires /
Sorry but does not represents none of the challenges of the real world . of a tire that is really stuck .
Smooth as butter(genius)
Spray CorrosionX on the rim edge. It works great.
Take it to professional i just ruined my new tire 😒
I've never enjoyed watching someone else change a tire as much as I have watching this video. I'll make sure to play this in the background while I'm changing my own tire or I might be joining Jim in the comments while I'm cussing and throwing things. Nice job on the video.
It ain't showing the tire flying across the yard before he finally got it
Cleaning the bead area with a wire brush must not be required? I ask because I've seen the pros clean them with a grinder and then re-apply adhesive. Maybe thats only required for highway rated tires?
BS !!! Let’s see a video of an tire that’s been on the rim for years ! Need a press or take to a tire shop ! Not worth the nightmare of doing it
Awesome video ! My tires have been mounted for 20 years so see if it comes off that easy !
Just bought my first mower; this will definitely save me money!
Excellent video. Never attempted this before, but with this video - got it done! I didn’t end up needing to use any lubricant. The tool set is a must though. Thanks - saved me some time and money!!
Easily is not my case
Getting new tire onto rim has been impossible task
Thank you for this video. I had the tyre on within 5 minutes after struggling for 10 before I searched for a video. Very precise and too the point. I got the tyre on then I paused the video to put air in. Realised I was getting nowhere pressed play again to see you explaining how to do it. Great video and highly recommended watching all of the video before starting! Cheers
Thank you
I had a 40 year old tire I tried breaking the bead with my heels and put all 295 pounds of me on it and it didn't budge I squirted motor oil where the rubber meets the rim then gently heated the rim with a torch until the oil started smoke it came apart no problem and no damage to the tire
I used a sawzall Chisel And cutting wheel Two hours to remove one