Пікірлер

• 
  @theprimonemo5 күн бұрын

  Ayyyyyy thanks

• 
  @rommelvazquez-rubio3294Ай бұрын

  I changed my vss and it still does this Idk what the issue could be and I don’t wanna give up on her…

• 
  @vivianasanchez4939Ай бұрын

  Thank you so much your video really helped me out a lot I just did it. I have a 2012 ford fiesta.

• 
  @user-kd5oj4wh8kАй бұрын

  What zesting are for charging 12V marine battery?

• 
  @andrewdupuis1151Ай бұрын

  i just got mine today for 30 in my city

• 
  @fanburen9916Ай бұрын

  Thank you so much for this!! the other guides were completely inaccurate and vague as to how to do this, but after watching this i only needed two tries to fix the indicator(after filling up the tires ofc).

• 
  @HarishKumar-gg7ul2 ай бұрын

  This is the problem exactly, I'm facing from 2 years but the repair shops keep telling to change the button and the button is unavailable as my i20 is older model. Now, I understood, I just need a WD40 spray to clean the latch button. And another thing is my car boot is behaving like this in the rainy season only... May be water went into the button. Thank you so much... I will let you know if this works in my car...

• 
  @camerond81764 ай бұрын

  Will not work if you change a sensor and need to have the new sensor coded to the car....................This will require the tool to wake the sensor up and write it to the car.

• 
  @BedsitBob5 ай бұрын

  My light usually goes out when I've pumped up the tyre. If it doesn't, I reset it from the Menu on the radio display.

• 
  @ajsprojects72016 ай бұрын

  I got one two use it on about 10 cars and it's the same wiv all of them comes up wiv ecu not found

• 
  @stevenjohnson246 ай бұрын

  Had this reset problem and couldn’t solve it but actually works. Thanks a lot

• 
  @DomsTakes7 ай бұрын

  How do you clean it after it has been sitting on the caulk? Paper towels? Do you need to then wash it with water?

• 
  @gurujiblessings64188 ай бұрын

  Thanks buddy

• 
  @Joestorm20008 ай бұрын

  I know this video is old, but I have that exact model and couldn't find any documentation for it. For the life of me, I couldn't figure out how to start the cloning process, so thank you!

• 
  @suzieq123409 ай бұрын

  Dude you are actually the best!!!! Thanks so much for this!!!

• 
  @montykane76019 ай бұрын

  Awesome

• 
  @monicapinto322511 ай бұрын

  I used these with the Team Catfish weight slides to make a kzread.infoUgkxdmsDj7fQXe77DC0l7P7ua8B3PiESUubM Carolina rig and they were perfect for the ponds I fish. I have also used them to make 3 way rigs and these work perfectly. Haven't had any issues with them snagging in rocks or in weeds yet.

• 
  @redtobertshateshandles Жыл бұрын

  I dunno about the lead but some of the comments are toxic. Nice mold. Good score.

• 
  @alishawaynick1751 Жыл бұрын

  Is it passenger tire side?

• 
  @tonycervantes4816 Жыл бұрын

  No mire nada si abría o no hermano como está eso ??

• 
  @BoneStockShtBox Жыл бұрын

  The big one is the best by far I’ve literally used it for hours with a 20lb tank man every now and then I’ll hit the tank with some heat and it will melt the ice but it doesn’t really effect the flame

• 
  @pierre084 Жыл бұрын

  Give it a wireless Controller for that console 😁

• 
  @Gone-Fishin Жыл бұрын

  I got this I love the feel I love the flow but when I whip it out there it spools up on me but when I'm just tossing it it doesn't I've played with it for hours tightening it and loosening it, I've done the works I just can't seem to find a happy medium

• 
  @srsrivera Жыл бұрын

  Thank you. People like you make life so much easier

• 
  @AncientCreature-i2o Жыл бұрын

  There is a spray that is made specifically for whitening and cleaning caulk in baths and showers. It works well and doesn't have the abrasive quality of the toilet bowl cleaner.

• 
  @darrellstudna3462 Жыл бұрын

  Thank you so much for posting this! You saved my life! Our Hendrick shop couldn’t figure out what was wrong with my car!

• 
  @mrcoolxoxo7007 Жыл бұрын

  Thanks brother, mine double beeped 5 seconds after yours.

• 
  @eyeseeyou68 Жыл бұрын

  I actually switched you off when I saw fishing. Then I gave you a second chance and everything you said my car did. And you helped me remove that tire pressure warning light. I’m glad you were on you tube! Thank you thank you!

• 
  @ymg200 Жыл бұрын

  TS4000 works with MAP gas. Does 225 torch work with MAP? I need MAP to solder copper pipes. Thank you.

• 
  @kiezen-_-3464 Жыл бұрын

  Works on fiesta EcoBoost 1L 64 plate

• 
  @BrokeDownDan Жыл бұрын

  Grab the belly meat too (I know a lot frown upon it), but there is absolutely nothing wrong with it.

• 
  @user-wd8me4xv7r Жыл бұрын

  Hi, maybe I am late with the commets, but your car had too low voltage - 11.3 V. For succesfull programming need to have at least 12.0 V, so need to charge the car battery. Also there is an additional 12 V charger in kit package, so you can try to use it, just I am not sure if it compatible in your area. Best regards!

• 
  @markwright1075 Жыл бұрын

  Great I've reset several times light still on so one of sensors is bad .

• 
  @phc3165 Жыл бұрын

  Hey. Thanks for the video. I was wondering if you can access HDDs via network/ethernet cable connected to your computer, or does it only clone HDDs? Thanks in advance.

• 
  @YooTooobJeff Жыл бұрын

  Dremel cut the old longer shaft to length and glue then to the new switch shaft/button(s)

• 
  @Th3Anzer Жыл бұрын

  Where can I get the Baitcaster

• 
  @swt6363 Жыл бұрын

  Do you have a wiring diagram for that charger I can't find one

• 
  @brysonram417 Жыл бұрын

  Thank you sir!

• 
  @stevejobbs3837 Жыл бұрын

  All u need is a USB to obd cable and a laptop and this software called forsake key programming this only works with fords tho and u can add , delete,add a key or delete and add all brand new keys with the software and computer tho anything else u have to have a programmer tho ur better programmers is the kd product or the zed bull like there minis other then that u may get a ck100 maybe and do them but that's it slick so other than that ur hit fr lol

• 
  @Mommabirdtreats Жыл бұрын

  I did this and it told me I needed to "train" my tire?

• 
  @coolstuffhowtoandfishing5488 Жыл бұрын

  I've never seen this method not work. It could be that the battery in the sensors are bad? Original sensor batteries only last 10 years or so, aftermarket only 5... I'm sorry, I have no other suggestion for you. I will say aftermarket programming tools are available cheap on Amazon. Less than $15. But like I say, I've never seen this method not work...

• 
  @mich2679 Жыл бұрын

  You sir are as brilliant as they come 👌

• 
  @thefrugalsportsman Жыл бұрын

  Great video! Fall striped bass fishing will be here soon and I want to make some large flutter spoons so thanks for the tips! I know for me when drilling stainless that when I drill at high speed it can temper the steel and make it very difficult to drill. It might help to drop the drill speed down a bit to hopefully make that easier. Keep up the great work and God bless!

• 
  @sierraa3675 Жыл бұрын

  Thank you! Worked for me

• 
  @davidyj9013 Жыл бұрын

  How did you know it was that switch? How did you know what orientation to put the switch in? Or doesn't it matter?

• 
  @coolstuffhowtoandfishing5488 Жыл бұрын

  I was pretty sure it was the switch because it worked if you pressed it a bunch, sometimes it worked. As far as orientation I can't remember, I did this repair a couple years ago. I don't think it mattered. But I can't be sure, it was a while ago. The unit still works perfect. One of the very few items I saved from a massive flood in our area that destroyed our home and most everything we owned. I also saved the shop vac. And the freezer and fridge too. The freezer died last year 10 years post flood. Fridge still going strong. I think everything else is long gone, most right away got chucked. Some things I tried to save but were unsalvageable

• 
  @annettenevarez306 Жыл бұрын

  Thank You

• 
  @MCDreng Жыл бұрын

  Small Mario is a simulator of a common illegal gambling machine in East Asia. They're known as Xiao Mali (Small Mario) machines as kind of a code name and because they are often decorated with stolen video game artwork.

• 
  @praveenshaji9713 Жыл бұрын

  Thank u so much my buddy

• 
  @guzmanphotos63842 жыл бұрын

  kzread.info/dash/bejne/ln2Vys6QgtLPmdI.html y'all watch this fixed my issue

• 
  @brianshull20002 жыл бұрын

  I really liked the review on the fish alert. I gave a dislike only due to its way to loud and has no volume control.

• 
  @michaelfoley53422 жыл бұрын

  THANK YOU for making this video! You saved me some 💰!