Пікірлер

• 
  @cassidy76474 күн бұрын

  Thanks man- me and my dad had NO idea what we were doing. Good channel keep it up 👍

• 
  @Steve-eb4qz8 күн бұрын

  Did you ever think of using a light if your going to make video's!! Duh!

• 
  @larrye26799 күн бұрын

  When replacing sensors, can i replace just the bad sensor or is it necessary to replace both of them in the set?

• 
  @JennyLee24-711 күн бұрын

  Thanks you saved me valuable time & how cool to know window up with key from outside. I was always thinking seems something was missing 😇👍

• 
  @Bigherb927614 күн бұрын

  Thank you for posting such a detailed video. This saved me a lot of money.

• 
  @illylovesburritos16 күн бұрын

  Thank you!!!!

• 
  @dustyncoalson841717 күн бұрын

  Mines cranking and turning the flywheel but not starting

• 
  @amdo8723 күн бұрын

  Thanks. Very helpful.

• 
  @thursnitetennis28 күн бұрын

  Thank you for this video. With the aid of this video I was able to fix our LG dryer for $12.71.

• 
  @handy.ginger27 күн бұрын

  Awesome. I love hearing this! Thanks for sharing.

• 
  @palosanto2678Ай бұрын

  Dónde va conectada la bomba de riego?

• 
  @palosanto2678Ай бұрын

  En qué partes del programador, se ve que conectan el común y las diferentes zonas pero no se muestra donde se conecta la bomba de riego

• 
  @melodydorman84Ай бұрын

  This was one of the only ones that worked on my car, other people described it wrong but the only thing I would recommend is do it over without the music, please

• 
  @handy.gingerАй бұрын

  Thanks for the comment and I’m glad it helped you. Yeah the music was supposed to be a joke because of all the opening and closing of the doors and such. 😀

• 
  @GingerSnap-ot7ezАй бұрын

  Can I just tip it to get the blades off?

• 
  @handy.gingerАй бұрын

  Yes, you can do that I just prefer to remove the deck so I can put more force on the wrench.

• 
  @FishOnIsMyHandle2 ай бұрын

  👍👍

• 
  @handy.gingerАй бұрын

  Glad it helped you!

• 
  @amandahoey7962 ай бұрын

  Thanks !

• 
  @handy.gingerАй бұрын

  Happy to help!

• 
  @psb9622 ай бұрын

  Great video. I was puzzled as to why I was getting power to the solenoid, but just for a second, and it wouldn't start. I started it using your screwdriver method (but using jump leads). With it running, I could see the positive battery terminal was sparking. So I cleaned up the connection, and it worked just fine.

• 
  @handy.gingerАй бұрын

  Awesome glad you got it working!

• 
  @dianchase73992 ай бұрын

  0:I'm having trouble removing the back panel on lg steam dryer

• 
  @SweetProductDeals2 ай бұрын

  Thank you. I believe the Solenoid is good. I hear a starting noise but nothing is turning. I was able to start the mower the other day but also had the same problem. I believe that thing in the starter is caught in the up or down position? I also just finished changing the mower belt and it was not necessary to remove the entire mower deck. It is, however, necessary to loosen the two inner pulleys to slip the belt on. Engaged, the belt is taught, but not super tight. Is that normal?

• 
  @handy.gingerАй бұрын

  Yeah that’s the same for mine.

• 
  @handy.gingerАй бұрын

  Also sometimes if the starter is stuck you can tap on it to get it to the place it needs to.

• 
  @SweetProductDealsАй бұрын

  @@handy.ginger It turned out to be the starter. As soon as I sprayed it with WD40 it started right up. However, the problem keeps happening and since I've already put everything back together, I need lift the front end of the tractor off the ground about 4 inches and then drop it, to get it unstuck each time I mow the lawn. In my experience with John Deere tractors, they are very poorly designed and don't appear to use high quality components. We have the technology to make things that last and it's a shame our world is money driven.

• 
  @blkwng812 ай бұрын

  What pads did you use? How many miles did you get out of the old pads ?

• 
  @handy.gingerАй бұрын

  I use Wagner ceramic pads. Hard to say how many miles they last as it depends on how hard you are on the brakes.

• 
  @gregssoundroom53942 ай бұрын

  Great video. Can also be the 20 Amp fuse for the power

• 
  @handy.ginger2 ай бұрын

  Great tip! Thanks for posting it!

• 
  @Holm.Q2 ай бұрын

  I guess my stock head unit was different so I bought the same wiring interface and that didn’t work out for me :( back to the drawing boards

• 
  @handy.ginger27 күн бұрын

  Sorry to hear that. I purchased mine from crutchfield and their customer service is usually really good to help with things like this. I would give them a call and see if they can help.

• 
  @petertarantelli3 ай бұрын

  Great install, reminds me of my younger days when I worked for Radio Shack and I sold all my buddies car stereos, then installed them.

• 
  @bennyo3 ай бұрын

  my actuator isn’t lining up with the lower control arm. no frickin idea what to do

• 
  @j.w.55103 ай бұрын

  No hate but why not just jack it up? and do it that way? This seems way too difficulty for no reason.

• 
  @handy.ginger2 ай бұрын

  I understand. I have found that for me this is easier because the bolt is usually a nightmare to get out and I hate laying on the ground trying to get it out. If the bolt came out super easy then I agree this is the long way. It also give you the opportunity to clean the grass off the top of the deck 😀

• 
  @sandyandcraigsmith95973 ай бұрын

  Really saved my bacon it was this bad solenoid but I always want to condemn the safety switches

• 
  @handy.ginger2 ай бұрын

  Glad it helped.

• 
  @MaybeFeetPics3 ай бұрын

  Speaking of gingers 😂😂

• 
  @handy.ginger2 ай бұрын

  Glad you enjoy my sense of humor 😂

• 
  @nicholasloke4843 ай бұрын

  Thank you!!!

• 
  @handy.ginger2 ай бұрын

  My pleasure 😀

• 
  @brianvermeulen22743 ай бұрын

  March 25, 2024. 3pm. Issue on not starting. Sensor on mower pto. Have to slightly move the pto lever to start.

• 
  @handy.ginger2 ай бұрын

  Yep sounds like the pto sensor.

• 
  @DrSamBeckett3 ай бұрын

  Just the video I needed! 💪

• 
  @handy.ginger3 ай бұрын

  Awesome. Glad this was helpful

• 
  @gregssoundroom53944 ай бұрын

  Really need that Pneumatic impact gun to get that nut off. Mine was not coming off using my wrench and all my strength

• 
  @handy.ginger3 ай бұрын

  Yeah they really can really be snug. That is why I remove the deck to make it easier to get it loose.

• 
  @busterbrown16863 ай бұрын

  Electric impact

• 
  @indoubt2474 ай бұрын

  Thank you

• 
  @handy.ginger2 ай бұрын

  My pleasure

• 
  @josecalmo43564 ай бұрын

  What do you guys think about this saw I just bought one ? 😅

• 
  @handy.ginger2 ай бұрын

  I’ve had mine for several years and like it just fine! It would be nice if it slide forward to cut bigger boards.

• 
  @annaguilar79464 ай бұрын

  How do you take off the inside of where the lint filter goes

• 
  @handy.ginger2 ай бұрын

  There are 2 screws in the inside of the dryer that hold the grate that the lint filter goes in. Once you remove those you can take that grate off and get to the inside of where the lint filter goes.

• 
  @jakemir4 ай бұрын

  Thank you for posting this video! this was very helpful just to open the top and every step after. Non of the other videos show the removal of the rear steam cover. Great Video!

• 
  @handy.ginger2 ай бұрын

  Awesome! Thanks for the great comment and I’m glad the video helped!

• 
  @tamir59404 ай бұрын

  What model is this

• 
  @handy.ginger27 күн бұрын

  I show the model number in the first 20 seconds of the video. If you jump to about 13 seconds in you should see it there.

• 
  @REFERTECH4U4 ай бұрын

  Nice job I’m doing mine tomorrow

• 
  @handy.ginger2 ай бұрын

  Sweet!

• 
  @xianofman13065 ай бұрын

  Wished I had known it was righty loosey this whole GD time!

• 
  @handy.ginger5 ай бұрын

  💯

• 
  @tomyboyy775 ай бұрын

  Thank you for sharing

• 
  @handy.ginger5 ай бұрын

  Of course. Happy to do it!

• 
  @wiggly84845 ай бұрын

  Thank you for your video! It was very hard to find this model and more so mine (760) saved me lots of guessing.

• 
  @handy.ginger5 ай бұрын

  Glad it was helpful!

• 
  @UncleLupe5 ай бұрын

  This video gave me the confidence to tear down our dryer. $57 in parts and my 10 year old dryer is back in action.

• 
  @handy.ginger5 ай бұрын

  Awesome. Glad it was helpful

• 
  @joeblow12015 ай бұрын

  Bro that music shit sucks overtop of your instructions

• 
  @handy.ginger5 ай бұрын

  lol. Yeah it was a joke because the instructions sound like the Hokey Pokey.

• 
  @joeblow12015 ай бұрын

  Wtf is that music

• 
  @handy.ginger5 ай бұрын

  It’s some old guy doing the Hokey Pokey. Supposed to be a joke. Lol

• 
  @brittanylund38555 ай бұрын

  Is this part number for any model by chance? I have a 07 4 runner limited 4WD ?

• 
  @handy.ginger2 ай бұрын

  I don’t know for 100% certainty but I believe it is the same. If you click on the Amazon link in the description it will tell you if it fits your vehicle when you enter it in.

• 
  @connmoney61095 ай бұрын

  I have one green and the other one is yellow. The yellow use to be green. Not sure if i knocked them off balance. Do they both need to be equally balanced lined up exactly leveled witg each other?

• 
  @handy.ginger5 ай бұрын

  As long as the green light is on that should be sending a good signal back to the motor and all should be good. Yea they need to be lined up and the green light is the indicator that is happening.

• 
  @connmoney61095 ай бұрын

  @@handy.ginger the remote allows the door to go up, but the light flashes and it won't come down. I have to do it manually. Not sure how to fix it

• 
  @qualityassemblysolutions5 ай бұрын

  You are doing it the hard way.

• 
  @handy.ginger5 ай бұрын

  Please elaborate 😀!

• 
  @qualityassemblysolutions5 ай бұрын

  @@handy.ginger watch my videos on installing a Goalrilla hoop. You will see .

• 
  @reditt885 ай бұрын

  Did this come with the usb port ?

• 
  @handy.ginger5 ай бұрын

  Yes it did!

• 
  @ShaneTabaka5 ай бұрын

  Thank you for the video. For those with small hands and an empty house so that the kiddos dont hear you speak profanities that even Aliens couldnt identify, you can replace the thermostat and fuse without removing the panels or drum. Pull your dryer out from the wall, disconnect the lint exhaust pipe completely from the dryer. It slides out once you remove the bracket screws holding the exhaust pipe at the bottom. You can remove the thermostat and the fuse by reaching into the hole and unscrewing each. The method in this video does make it simple to access and remove each piece as instructed, but there is a different method that some may find easier (or more difficult).

• 
  @handy.ginger5 ай бұрын

  Great point! Thanks for sharing.

• 
  @kd5ozy6 ай бұрын

  check the limit switches to see if they are NO or NC

• 
  @handy.ginger2 ай бұрын

  Yep what he said👆👆

• 
  @BeanMan56216 ай бұрын

  SAME THING HAPPEN TO ME!!

• 
  @handy.ginger5 ай бұрын

  Hope this video helped!

• 
  @BeanMan56215 ай бұрын

  Honestly how scared if will happen again, it fixed itself last time..

• 
  @BlackMediaWorks6 ай бұрын

  Thanks for the video! I tried this so many times that I lost count and I still can't get stage 1 to work where I reset the codes and connect to the vehicle sensor. I wasn't able to get to Stage 2 where I actually programmed the Fobs. Do you know how I determine is my vehicle sensor is actually working?

• 
  @handy.ginger2 ай бұрын

  No sorry. I’m not sure how to do that.

• 
  @antronargaiv32836 ай бұрын

  Have to replace the rollers on our LG DLEX5101V. Your video showed me where the release catches are and how to access the front rollers. Many thanks for taking the time to make & post it! Update: rollers (one frozen, one separated from its hub), belt and tensioner replaced, using a kit from Amazon ($40). We shall see. It went well, the rear rollers are a bit of a trial to get out, you have to remove the entire mounting plate to get at the nuts. First, disconnect the water system hose (at the water system). Remove five philips screws on the back of the drier, then dismount (you don't have to remove it) the heating element and back off one of the screws holding the water system so the rear panel clears. You have to push down on the panel to release it from a couple of tabs at the top, then lift off another pair of tabs at the bottom. Thread the water system hose through the rear panel and the mounting plate should be free. You will pull it forward through the space where the drum was. Yeah, you basically need to disassemble the entire drier! Total time including vacuuming out the lint - 1.5 hrs Fasteners are metric - I used a 14mm socket and a 10mm box wrench for the rollers. The 10mm box wrench is also for the idler pulley bracket. My idler pulley assy did not come with grease but the one I removed had grease at the mounting point and the pulley shaft, so I threw a bit of hi-temp grease there before I installed it. Make sure you get the shoulder of the mounting bolt through the hole in the pulley bracket. It should move freely when the bolt is tightened.

• 
  @handy.ginger6 ай бұрын

  Awesome. So glad it helped and thanks for all the additional detail!