Been looking for some trails in the area, this looks perfect!
@grizzlyworksrc7 күн бұрын
@@alexnorthcutt3929 check out the website rcmap.io. I've added quite a few places for crawling. There are some really nice places to run the trucks.
@rz-tv10 күн бұрын
Thanks dude I was installing the lift kit and found a pin laying on my bench now I know where it goes even though its driving it won't for long without that pin.. 🍻
@TV-ls6emАй бұрын
Great review! Is the rear moving left and right a little? Cause mine is moving, not sure if that's normal.
@grizzlyworksrc29 күн бұрын
Thank you. Mine doesn't. You may just need to make sure everything is tight.
@arnoldangel3077Ай бұрын
Have you heard of any one or have you tried the injora carbon frame
@grizzlyworksrcАй бұрын
I have one of the injora LCG frame rail sets with the angled skid. I've never tried thier stock replacement though. They feel a little flimsy compared to other chassis sets I've tried. If you're asking about fitment with this LCG set, it won't work. My LCG set only works with stock frame rails.
@hauwkeautogallery2 ай бұрын
What wheels are you running on your gladiator?
@grizzlyworksrc2 ай бұрын
They are the cheap Injora 15 hole 6 spoke beadlock with Mazz Designs titanium Double Star rings.
@Super1handed_rc2 ай бұрын
So on my gladiator the battery stretch was killing me so I kinda half floated my esc off the front of the mount and it’s much better plus little more weight forward
@damienfournier11573 ай бұрын
Unfortunately, you dont send to France...
@turboencabulator24103 ай бұрын
Your lcg kit is the most recent mod to my power wagon and by far the most effective. I'm starting to believe that this hard body and the scale accessories I've added just don't perform at a high level. I've done extensive weathering and rust on mine and it's beautiful, but maybe destined to be a shelf queen, Meus metal axles and all.
@grizzlyworksrc3 ай бұрын
I'm glad it's working out for you. I personally feel like the Power Wagon is more of a trail truck than a rock crawler. It also makes for a great tow rig when paired with the Axial trailer.
@Sunsh1ne5324 ай бұрын
I just installed this kit on my gladiator only to realize that my battery cable doesn’t reach anymore. Any recommendations on how to make it work?
@grizzlyworksrc4 ай бұрын
There could be a couple things going on. The V3 has 2 rear tray positions for the rear of the Gladiator or Power Wagon. Check to make sure you have it as far forward as possible. Another possibility is if you have more than one truck, you may not be using the battery that came with the Gladiator. Before Axial went to the Spektrum electronics, the Gladiator battery had longer battery leads than the other trucks. The last thing I can think of is yyou may ahve the components positioned in the wrong orientation. The ESC needs to have the battery input toward the front of the truck and the battery needs to have the + and - leads on the top right side fo the truck. If you go to 12:55 and 16:00 in the video you can see the correct orientation. Please let me know if that helps. If not, message me on either Instagram or Etsy and I'll help work through everything with you.
@DTW-bx2vy4 ай бұрын
I took out two unneeded transmission gears & pins & shimmed up the output shaft & counter rotation shaft where the gears sat inside the transmission on my FX118 Fury Wagon. They only add more rotational mass & not actually needed in all honesty. It does adds some punch being it can spool up faster with less weight to turn threw the drivetrain.
@WhiskeyMindsRc4 ай бұрын
You explained all the right things that should of very nice job of it .
@kevincasey68764 ай бұрын
When will these be available again?
@grizzlyworksrc4 ай бұрын
I'm about to list more and have more on the way. They should be here this coming week.
@CowboyRc7434 ай бұрын
With the secong plug, wire that lightbar!
@jesselanham19235 ай бұрын
Kinda wish you could re-do the video. During a lot of the video the process you were explaining wasn't in the field of view of the camera.
@grizzlyworksrc4 ай бұрын
Thanks for the feedback. Still working on camera awareness. I'll absolutely consider making the video again. Until then, if there is something specific you need help with please message me. I'm more than happy to help.
@JeepBully5 ай бұрын
Get the bearing kit sooner than later. The bushings after 6-7 batteries run through develop slop. Most the bushings aren’t greased as well. Your ride will thank you for it
@user-ln8iq9ne1n5 ай бұрын
I just installed the v1 kit on my stock bronco. It’s a great, high quality kit! I’m having trouble with the top of the rear shocks hitting the frame rails. I mounted them onto the frame rail and they work fine. If I use any of the other shock mounting positions the top of the shock contacts the frame rail. Perhaps I’m doing something wrong? Any suggestions? Thanks!
@madsteam773 ай бұрын
Did you figure anything out. I just installed mine and having the same problem. Thanks.
@user-ln8iq9ne1n3 ай бұрын
@@madsteam77 I ended up using some spacers and longer screws. Works well now!
@garystone65835 ай бұрын
Layed my shocks all the way on the upper holes, have about 80mm of flex now. had to trim the servo wings down so the servo does nor hit the rails
@grizzlyworksrc5 ай бұрын
Nice. I ended up just trimming the frame rails. I had no plans to run bumpers so the bumper mounts were completely removed. Saved a few grams and there is a ton of room for flex.
@brendankohlheim73725 ай бұрын
would this fit the new power wagon.
@grizzlyworksrc5 ай бұрын
Yes it does. It even clears the interior. There is just some very minor trimming required on the inner fender to have access to all shock mounting options.
@Super1handed_rc6 ай бұрын
Can’t wait to install mine 🤘🏻🤘🏻🤘🏻
@donv3706 ай бұрын
Just ordered 5 of these and thanks for the video tutorial. You mentioned preferred back shock mount locations, but I didn't catch where your preferred spot is for the deadbolts, i have 2 of these I'm going to install on. Is there somewhere you can point me so that I know where you recommend putting the deadbolt rear shocks onto the lcg kit? Thanks.
@grizzlyworksrc6 ай бұрын
Thank you for you order! I'll be sending you a message through Etsy.
@donv3706 ай бұрын
@@grizzlyworksrc right on!
@Youboyg6 ай бұрын
Which is better to buy fms LC80 or this furitek mate?🙏❤️
@grizzlyworksrc6 ай бұрын
I think it depend on what you want out of it. If you're looking for a really good looking relatively true to scale trail truck the LC80 wins. If you aren't concerned with the true to scale side of things and want a really good rock crawler the FX-118 would be better. You could also take a look at the new Hobby Plus Evo Pro. I haven't bought one yet, but it looks to be a brushed 2 speed version of the FX-118.
@bynstrm7 ай бұрын
I really appreciate these in depth videos! Recently purchased your 3d printed sliders and they are awesome! Keep up the great content!
@grizzlyworksrc7 ай бұрын
I appreciate it!
@REACTIVETERRAINRC7 ай бұрын
Nice job bro really clean lcg conversion 👍
@grizzlyworksrc7 ай бұрын
Thank you!
@rc_guy_miami7 ай бұрын
Very nice!, Thanks for the vid
@grizzlyworksrc7 ай бұрын
Thanks for watching.
@poobah1877 ай бұрын
these look real nice. are you planning to make any others parts for the fury wagon?
@grizzlyworksrc7 ай бұрын
I have a few things I'm working on. Just waiting on some hardware and a little more testing before I list them.
@poobah1877 ай бұрын
@@grizzlyworksrc I got a set of your sliders last week and I have really fallen in love with them. If you got prototypes I'd be happy to help test.
@Youboyg7 ай бұрын
Which is better furitek f118 fury or FMS fcx18 L80 my friend? Tia❤️👌🙏
@grizzlyworksrc7 ай бұрын
I think that will really depend on what you want to do with the truck. The FMS is not as much of a performance based truck. It can do some crawling, but out of the box it is more of a scale trail truck. The Furitek is a performance based truck that is built to be a crawler. With a few free mods it's actually a really good one. My concern with both would be reliability with heavy use. When you look at it from that point of view, upgrade parts are easier to find and cheaper with the FMS. I know that doesn't give you a perfect answer of which is better, but it really depends on what you want to do with it and what level of performance you're looking for.
@jimbo42037 ай бұрын
I like it for the shock placement options alone , you should watch my free Lcg mods video 😊
@stevefe85227 ай бұрын
How about a rear limiting strap. Helps when going down hill.
@grizzlyworksrc7 ай бұрын
I actually tested this and it seemed to limit the trucks in other areas. Mainly it would cause the trucks to get high centered a lot. It was actually a pretty big issue when getting to the top of a climb. I found that a decent set of oil filled shocks helped a lot with descending.
@lukefarrow53997 ай бұрын
I’m trying to build out a stock SCX24 into a class 1 truck. This looks like a pretty good option for more customization while maintaining the flat skid. Nice work man!
@grizzlyworksrc7 ай бұрын
Thank you!
@macharleys727 ай бұрын
When will they be back in stock?
@grizzlyworksrc7 ай бұрын
I'm shooting for early next week.
@bcochener7 ай бұрын
The limit strap addition was a nice touch. I have drilled that out on trays to do the same so many times. Prints look like great quality, really nice stuff as usual.
@grizzlyworksrc7 ай бұрын
Thank you!
@cardboardcrawlersrc88057 ай бұрын
Are you making bumpers out of this material now as well ?
@grizzlyworksrc7 ай бұрын
Not yet. I have to update designs or possibly make new designs to work with the material/printing process.
@troypostie12527 ай бұрын
Well done sir. Im not much into stock rigs but these parts look very promising. Cant wait to see you in another live. Like the vid style🔥💯
@grizzlyworksrc7 ай бұрын
Thank you!
@cardboardcrawlersrc88057 ай бұрын
Version 3 🤔
@grizzlyworksrc7 ай бұрын
I had a V2 that was out for maybe 6 months. However, the company that made one of the resins for the mixture I came up with for it changed thier formula and I started having a ton of print and strength issues. Thats actually what started me down the road of testing different material and manufacturing options.
@iderryan8 ай бұрын
You really don't want to use any loctite near plastic. For certain plastics, it can cause complete decomposition of nearby plastic. Think of the way fungus rots trees, that happens in a few days. There are other materials that work well in situations like this. I like acrylic paint.
@grizzlyworksrc8 ай бұрын
I like the idea of using acrylic paint! I personally haven't had an issue using thread locker with these, but I can see many reasons why using paint would actually be better.
@nafex37408 ай бұрын
Good information baddy 😂😂😂
@ScarecrowMagic8 ай бұрын
Wow!
@bobcatarizona48408 ай бұрын
Thank you for putting this out there. Working on the transmission was one of my worries for picking up a RC. Definitely looking forward to checking out more of what is on your channel.
@grizzlyworksrc8 ай бұрын
No problem. Glad the video helped.
@YNOTRC8 ай бұрын
Nice vid. Where did you get the tree graphics on the jeep
@grizzlyworksrc8 ай бұрын
Thank you! I bought them from an Etsy store called micro crawler club, but I'm not sure he is still selling them. You can try messaging him to see if he has more available though. www.etsy.com/shop/MicroCrawlerClub
@YNOTRC8 ай бұрын
@@grizzlyworksrc thanks for the link... Oh I just got those suspension flex plates from you and they going on soon 😄
@thindigital8 ай бұрын
Are these cr18p axles? If we want to upgrade the steering link....
@grizzlyworksrc8 ай бұрын
I believe they are. The entire truck is based off the CR18P
@TheNeck-rc468 ай бұрын
Great vido.great truck to,did what you did with all the gears, happened to have the bearings too. So they went in also. Like your up grade ideas. Looking forward to those skid plates. K keep them coming
@grizzlyworksrc8 ай бұрын
Thank you. I honestly haven't done much with the truck since this video. I'm waiting on quite a few parts to get here so I can upgrade most of the weak points. If you are interested in the sliders I have them listed at GrizzlyWorksRC.com.
@travelinwithTODD8 ай бұрын
i love the power wagon. i picked one up and did some simple upgrades on mine. i love the green color. not sure if you allow links in the comments but check out mine if you want. i am also building a indoor RC course for the 24/th scale trucks. www.youtube.com/@travelinwithTODD/community
@keldonator9 ай бұрын
Probably silicone grease, it is a proper grease for metal gears in a plastic housing.
@rcarty4199 ай бұрын
These look like an amazing deal!! Love your mods! Very cool Big sub dude!
@grizzlyworksrc9 ай бұрын
It is a great deal. Just the electronics package alone is worth more than half the cost.
@lgrc61209 ай бұрын
👍
@meerartfan26529 ай бұрын
Top review and run !!! 🤠👍
@grizzlyworksrc9 ай бұрын
Thank you.
@bcochener9 ай бұрын
Good info! Gotta pick one of these up. Problem is they look so good… what is left for me to do?? 😂
@grizzlyworksrc8 ай бұрын
There's plenty to do on the performance side. Visually it could use some weathering and better lighting. I agree they do look really good out of the box though.
@rc.remedy9 ай бұрын
Nice testing spot there, yeah you'd think for a tow rig they'd give it some more power
@grizzlyworksrc9 ай бұрын
I would love to see them upgrade to something like an 050 motor and a little bit smoother esc. I will give it credit though. It pulled the trailer with a comp truck on it through the grass in my back yard. It wasn't happy about it, but it did it.
@PSYCHO13GARAGE9 ай бұрын
great review and run of the new Axial SCX24 Power Wagon. I will get my hands on one once finances permit. lol You always cover things about the trucks that people care about. Pointing out the inner fender thing was great I had not seen that yet. Nice work buddy!
@grizzlyworksrc9 ай бұрын
I appreciate that! I like to look at the trucks knowing that I will be modding them. It tends to make you notice things. In the instance of the inner fenders my thought was what front bumpers can I put on it cause I don't like what it came with. When I looked at it I saw the front bumper and front of the fender use the same mounting hole. I do think it's funny that I ran through the truck for about 45 minutes during the unboxing and still didn't notice them until I looked at changing the front bumper...
@nickhathaway46179 ай бұрын
I yanked mine and I put a Stella trans with Komodo in mine. So quiet now
@grizzlyworksrc9 ай бұрын
Good to know. That's something I've been considering, but with other projects going on it'll have to wait for now.
@nickhathaway46179 ай бұрын
@@grizzlyworksrc have to use the skid from the furitek monster truck to work
Пікірлер
Been looking for some trails in the area, this looks perfect!
@@alexnorthcutt3929 check out the website rcmap.io. I've added quite a few places for crawling. There are some really nice places to run the trucks.
Thanks dude I was installing the lift kit and found a pin laying on my bench now I know where it goes even though its driving it won't for long without that pin.. 🍻
Great review! Is the rear moving left and right a little? Cause mine is moving, not sure if that's normal.
Thank you. Mine doesn't. You may just need to make sure everything is tight.
Have you heard of any one or have you tried the injora carbon frame
I have one of the injora LCG frame rail sets with the angled skid. I've never tried thier stock replacement though. They feel a little flimsy compared to other chassis sets I've tried. If you're asking about fitment with this LCG set, it won't work. My LCG set only works with stock frame rails.
What wheels are you running on your gladiator?
They are the cheap Injora 15 hole 6 spoke beadlock with Mazz Designs titanium Double Star rings.
So on my gladiator the battery stretch was killing me so I kinda half floated my esc off the front of the mount and it’s much better plus little more weight forward
Unfortunately, you dont send to France...
Your lcg kit is the most recent mod to my power wagon and by far the most effective. I'm starting to believe that this hard body and the scale accessories I've added just don't perform at a high level. I've done extensive weathering and rust on mine and it's beautiful, but maybe destined to be a shelf queen, Meus metal axles and all.
I'm glad it's working out for you. I personally feel like the Power Wagon is more of a trail truck than a rock crawler. It also makes for a great tow rig when paired with the Axial trailer.
I just installed this kit on my gladiator only to realize that my battery cable doesn’t reach anymore. Any recommendations on how to make it work?
There could be a couple things going on. The V3 has 2 rear tray positions for the rear of the Gladiator or Power Wagon. Check to make sure you have it as far forward as possible. Another possibility is if you have more than one truck, you may not be using the battery that came with the Gladiator. Before Axial went to the Spektrum electronics, the Gladiator battery had longer battery leads than the other trucks. The last thing I can think of is yyou may ahve the components positioned in the wrong orientation. The ESC needs to have the battery input toward the front of the truck and the battery needs to have the + and - leads on the top right side fo the truck. If you go to 12:55 and 16:00 in the video you can see the correct orientation. Please let me know if that helps. If not, message me on either Instagram or Etsy and I'll help work through everything with you.
I took out two unneeded transmission gears & pins & shimmed up the output shaft & counter rotation shaft where the gears sat inside the transmission on my FX118 Fury Wagon. They only add more rotational mass & not actually needed in all honesty. It does adds some punch being it can spool up faster with less weight to turn threw the drivetrain.
You explained all the right things that should of very nice job of it .
When will these be available again?
I'm about to list more and have more on the way. They should be here this coming week.
With the secong plug, wire that lightbar!
Kinda wish you could re-do the video. During a lot of the video the process you were explaining wasn't in the field of view of the camera.
Thanks for the feedback. Still working on camera awareness. I'll absolutely consider making the video again. Until then, if there is something specific you need help with please message me. I'm more than happy to help.
Get the bearing kit sooner than later. The bushings after 6-7 batteries run through develop slop. Most the bushings aren’t greased as well. Your ride will thank you for it
I just installed the v1 kit on my stock bronco. It’s a great, high quality kit! I’m having trouble with the top of the rear shocks hitting the frame rails. I mounted them onto the frame rail and they work fine. If I use any of the other shock mounting positions the top of the shock contacts the frame rail. Perhaps I’m doing something wrong? Any suggestions? Thanks!
Did you figure anything out. I just installed mine and having the same problem. Thanks.
@@madsteam77 I ended up using some spacers and longer screws. Works well now!
Layed my shocks all the way on the upper holes, have about 80mm of flex now. had to trim the servo wings down so the servo does nor hit the rails
Nice. I ended up just trimming the frame rails. I had no plans to run bumpers so the bumper mounts were completely removed. Saved a few grams and there is a ton of room for flex.
would this fit the new power wagon.
Yes it does. It even clears the interior. There is just some very minor trimming required on the inner fender to have access to all shock mounting options.
Can’t wait to install mine 🤘🏻🤘🏻🤘🏻
Just ordered 5 of these and thanks for the video tutorial. You mentioned preferred back shock mount locations, but I didn't catch where your preferred spot is for the deadbolts, i have 2 of these I'm going to install on. Is there somewhere you can point me so that I know where you recommend putting the deadbolt rear shocks onto the lcg kit? Thanks.
Thank you for you order! I'll be sending you a message through Etsy.
@@grizzlyworksrc right on!
Which is better to buy fms LC80 or this furitek mate?🙏❤️
I think it depend on what you want out of it. If you're looking for a really good looking relatively true to scale trail truck the LC80 wins. If you aren't concerned with the true to scale side of things and want a really good rock crawler the FX-118 would be better. You could also take a look at the new Hobby Plus Evo Pro. I haven't bought one yet, but it looks to be a brushed 2 speed version of the FX-118.
I really appreciate these in depth videos! Recently purchased your 3d printed sliders and they are awesome! Keep up the great content!
I appreciate it!
Nice job bro really clean lcg conversion 👍
Thank you!
Very nice!, Thanks for the vid
Thanks for watching.
these look real nice. are you planning to make any others parts for the fury wagon?
I have a few things I'm working on. Just waiting on some hardware and a little more testing before I list them.
@@grizzlyworksrc I got a set of your sliders last week and I have really fallen in love with them. If you got prototypes I'd be happy to help test.
Which is better furitek f118 fury or FMS fcx18 L80 my friend? Tia❤️👌🙏
I think that will really depend on what you want to do with the truck. The FMS is not as much of a performance based truck. It can do some crawling, but out of the box it is more of a scale trail truck. The Furitek is a performance based truck that is built to be a crawler. With a few free mods it's actually a really good one. My concern with both would be reliability with heavy use. When you look at it from that point of view, upgrade parts are easier to find and cheaper with the FMS. I know that doesn't give you a perfect answer of which is better, but it really depends on what you want to do with it and what level of performance you're looking for.
I like it for the shock placement options alone , you should watch my free Lcg mods video 😊
How about a rear limiting strap. Helps when going down hill.
I actually tested this and it seemed to limit the trucks in other areas. Mainly it would cause the trucks to get high centered a lot. It was actually a pretty big issue when getting to the top of a climb. I found that a decent set of oil filled shocks helped a lot with descending.
I’m trying to build out a stock SCX24 into a class 1 truck. This looks like a pretty good option for more customization while maintaining the flat skid. Nice work man!
Thank you!
When will they be back in stock?
I'm shooting for early next week.
The limit strap addition was a nice touch. I have drilled that out on trays to do the same so many times. Prints look like great quality, really nice stuff as usual.
Thank you!
Are you making bumpers out of this material now as well ?
Not yet. I have to update designs or possibly make new designs to work with the material/printing process.
Well done sir. Im not much into stock rigs but these parts look very promising. Cant wait to see you in another live. Like the vid style🔥💯
Thank you!
Version 3 🤔
I had a V2 that was out for maybe 6 months. However, the company that made one of the resins for the mixture I came up with for it changed thier formula and I started having a ton of print and strength issues. Thats actually what started me down the road of testing different material and manufacturing options.
You really don't want to use any loctite near plastic. For certain plastics, it can cause complete decomposition of nearby plastic. Think of the way fungus rots trees, that happens in a few days. There are other materials that work well in situations like this. I like acrylic paint.
I like the idea of using acrylic paint! I personally haven't had an issue using thread locker with these, but I can see many reasons why using paint would actually be better.
Good information baddy 😂😂😂
Wow!
Thank you for putting this out there. Working on the transmission was one of my worries for picking up a RC. Definitely looking forward to checking out more of what is on your channel.
No problem. Glad the video helped.
Nice vid. Where did you get the tree graphics on the jeep
Thank you! I bought them from an Etsy store called micro crawler club, but I'm not sure he is still selling them. You can try messaging him to see if he has more available though. www.etsy.com/shop/MicroCrawlerClub
@@grizzlyworksrc thanks for the link... Oh I just got those suspension flex plates from you and they going on soon 😄
Are these cr18p axles? If we want to upgrade the steering link....
I believe they are. The entire truck is based off the CR18P
Great vido.great truck to,did what you did with all the gears, happened to have the bearings too. So they went in also. Like your up grade ideas. Looking forward to those skid plates. K keep them coming
Thank you. I honestly haven't done much with the truck since this video. I'm waiting on quite a few parts to get here so I can upgrade most of the weak points. If you are interested in the sliders I have them listed at GrizzlyWorksRC.com.
i love the power wagon. i picked one up and did some simple upgrades on mine. i love the green color. not sure if you allow links in the comments but check out mine if you want. i am also building a indoor RC course for the 24/th scale trucks. www.youtube.com/@travelinwithTODD/community
Probably silicone grease, it is a proper grease for metal gears in a plastic housing.
These look like an amazing deal!! Love your mods! Very cool Big sub dude!
It is a great deal. Just the electronics package alone is worth more than half the cost.
👍
Top review and run !!! 🤠👍
Thank you.
Good info! Gotta pick one of these up. Problem is they look so good… what is left for me to do?? 😂
There's plenty to do on the performance side. Visually it could use some weathering and better lighting. I agree they do look really good out of the box though.
Nice testing spot there, yeah you'd think for a tow rig they'd give it some more power
I would love to see them upgrade to something like an 050 motor and a little bit smoother esc. I will give it credit though. It pulled the trailer with a comp truck on it through the grass in my back yard. It wasn't happy about it, but it did it.
great review and run of the new Axial SCX24 Power Wagon. I will get my hands on one once finances permit. lol You always cover things about the trucks that people care about. Pointing out the inner fender thing was great I had not seen that yet. Nice work buddy!
I appreciate that! I like to look at the trucks knowing that I will be modding them. It tends to make you notice things. In the instance of the inner fenders my thought was what front bumpers can I put on it cause I don't like what it came with. When I looked at it I saw the front bumper and front of the fender use the same mounting hole. I do think it's funny that I ran through the truck for about 45 minutes during the unboxing and still didn't notice them until I looked at changing the front bumper...
I yanked mine and I put a Stella trans with Komodo in mine. So quiet now
Good to know. That's something I've been considering, but with other projects going on it'll have to wait for now.
@@grizzlyworksrc have to use the skid from the furitek monster truck to work