Пікірлер

• 
  @spect-vi5ml23 күн бұрын

  do u know what should i do if there is no white circle?)

• 
  @mkoukoumides23 күн бұрын

  If you don't see the white circle, probably your fingerprint camera doesn't work. Try to reset your phone... If it still doesn't work you probably have a physical damage so try to replace the fingerprint camera. Another possibility that I guess you already checked is the one to have forgotten the sticky cover off the fingerprint area.

• 
  @DosiBMad24 күн бұрын

  Do you have any idea why my lowbeam light flashing when I start whith my X8? Maybe contact problem on the bulb?

• 
  @mkoukoumides24 күн бұрын

  @@DosiBMad yes, probably there is a loose contact somewhere or maybe it's the lamp itself. I have the same problem when I drive in bumpy roads.

• 
  @DosiBMad24 күн бұрын

  Thanks for Your answer. So I dont have to solve this problem by a bulb change or something simply thing?😃

• 
  @mkoukoumides24 күн бұрын

  @@DosiBMad what you can do is to take the lamp off the scooter hold it in your hands and then start the engine to see what happens... If it keeps trembling, then the problem isn't the lamp plug. Shake the lamp to see if this is the problem. If nothing happens then there is a loose connection somewhere else.

• 
  @luisrafaelrodriguez6229 күн бұрын

  Como se llama ese boton se consigue

• 
  @ima_SAbeast2 ай бұрын

  I dont Understand

• 
  @mkoukoumides2 ай бұрын

  At the beginning I'm showing how the jumper switch looks like. After that I'm showing which cables you have to shortcircuit when your machine works under 220-240V.

• 
  @xristosdino3 ай бұрын

  Thank you for the video Mano, sadly I am getting the performance chart Test failed message.

• 
  @mkoukoumides3 ай бұрын

  Keep trying. As I mentioned in the video, you may need event 10 to 15 times to make it work...

• 
  @hernandopaniagua27804 ай бұрын

  esto en inglés,,queda muy complicado para entender😮

• 
  @sergiocolina77394 ай бұрын

  Muchas gracias corte y uni el marrón y blanco me funciono perfectamente soy de argentina 220v el único vídeo que muestra como solucionar ese problema

• 
  @nikosg.21184 ай бұрын

  Αγόρι μου είσαι ο Μάστερ Μάιντ , έφτιαξε !! Thank you my Greek friend it worked flawless

• 
  @mkoukoumides4 ай бұрын

  Μπράβο! Χαίρομαι που βοήθησα!😊

• 
  @SnoringMan135 ай бұрын

  i love you!!!! I can't add fingerprint seen i replace my screen for over 6 months. Almost sell my phone bcoz of this. Thank you so much!

• 
  @hector.rodriguez72315 ай бұрын

  Thank you for this video!!. I have the same model. When I tried to open it, that black knob and those two contact plates appeared on the floor. Now I understand where to put those contact plates. (sorry, translated with Translate) 👍

• 
  @kimmaricbernat81575 ай бұрын

  I only get SPI Text 0x60 Timeout

• 
  @mkoukoumides5 ай бұрын

  Perhaps the objects you place on the fingerprint are either not very white or very black. They might be transparent...

• 
  @dilandharmarathna15055 ай бұрын

  Do you know the value of the thermal fuse please?

• 
  @constantgoodangelson846 ай бұрын

  Καλησπέρα. Είδα το βίντεο σας και μου προκάλεσε ενδιαφέρον καθώς μου αρέσει να αλλάζω πράγματα αφού έχω κάνει διάγνωση και έχω βρει την βλάβη. Συγχαρητήρια για τον διαμοιρασμό με τον κόσμο της γνώσης σας. Έχω μία ερώτηση....Πόσο εύκολο είναι για κάποιον που δεν ξέρει από ηλεκτρονικά, αλλά μαθαίνει γρήγορα, να μπορέσει να κάνει διάγνωση ποιο τρανζίστορ είναι καμμένο , οι πυκνωτές συνήθως φαίνεται εάν είναι χαλασμένοι (συνήθως είναι φουσκωμένοι στο πάνω μέρος), με πολύμετρο και να κάνει να τους αλλάζει ;; Ρωτώ γιατί έχω μία πλακέτα από λέβητα αερίου και δεν βρίσκω ηλεκτρονικό για να την πιάσει να την δει, και καινούργια κοστίζει κοντά στα 250,00€...άρα αξίζει μια προσπάθεια...Σε ευχαριστώ εκ των προτέρων για την απάντηση σου και για τον χρόνο σου.

• 
  @mkoukoumides6 ай бұрын

  Ο κανονικός έλεγχος τρανζίστορ, ανάλογα με τον τύπο μπορεί να απαιτεί και ειδικά μηχανήματα τα οποία δεν αξίζει να αγοράσετε. Ο πιο απλός έλεγχος είναι να δείτε αν είναι βραχυκυκλωμένο με ένα απλό πολύμετρο ή αν είναι σκασμένο (έχει τριχοειδή ρωγμή).Απλά θα πρέπει να γνωρίζετε τι είναι το κάθε ποδαράκι του. Ενίοτε και ανάλογα με το κύκλωμα, μπορεί να απαιτείται να αφαιρεθεί από την πλακέτα για να ελεγχθεί. Επειδή το κόστος είναι συνήθως πολυ μικρό, μπορείτε να το αγοράσετε και να το αλλάξετε ούτως ή άλλως. Τα ίδια βέβαια ισχύουν και για τους πυκνωτές. Δεν είναι πάντα ορατή η βλάβη τους και μπορεί να επιρρεάζεται η συνολική λειτουργία της πλακέτας. Εν ολίγοις, για ένα τέτοιο κόστος που αναφέρετε, και δεδομένου του ότι πιθανόν να μην έχετε τα απαραίτητα όργανα μέτρησης, θα πρότεινα να αλλάξετε όλα τα ανωτέρω στοιχεία, αφού ρωτήσετε πρώτα για το κόστος τους, γιατί κάποια μπορεί να είναι πάρα πολύ ακριβά... Ελπίζω να βοήθησα λιγάκι...🙂

• 
  @LOSERxHUNTER6 ай бұрын

  everything goes perfectly fine but the last one says perfomance_chart failed what can i do brother?

• 
  @mkoukoumides6 ай бұрын

  sometimes you have to do it many times (more than 10) until you succeed to do it.

• 
  @martinacosta31266 ай бұрын

  Hello! I pressed the switch and it turned on, when I wanted to make the jumper and it didn't turn on. The standby light remains but does not turn on...

• 
  @mkoukoumides6 ай бұрын

  Obviously it's not the same problem then...

• 
  @you_tube__reels6 ай бұрын

  Thank you..

• 
  @denuko34737 ай бұрын

  It doesnt work after 28 tries with my xiaomi mi 9t

• 
  @mkoukoumides7 ай бұрын

  I'm sorry to hear that... It's not so often to happen and I don't know the reason... Perhaps it is the screen defective...

• 
  @pl33177 ай бұрын

  Thank you so much !

• 
  @user-ss6dp4gu5y7 ай бұрын

  hi mr I have a question please My wash steem when it turn off the red light the green light doesn't turn on Thanks

• 
  @mkoukoumides7 ай бұрын

  I'm really sorry but I can't help you with this mainly because I can't understand the problem...

• 
  @kritikos787 ай бұрын

  Κύριε Μάνο καλησπέρα σας, θέλω να βγάλω το κοντέρ να το πάω για επαναφορά γιατί έχει κολλήσει στις 100000 μπορείτε να μού πείτε πώς βγαίνει από μπροστά ή πρέπει να λύσω όλο το μούτρο Ευχαριστώ

• 
  @mkoukoumides7 ай бұрын

  Δυστυχώς αγαπητέ πρέπει να λύσεις ότι βλέπεις γύρω του. Δεν βγαίνει από μπροστά... Θέλει δουλίτσα...

• 
  @kritikos787 ай бұрын

  Υπάρχει κάποιο βίντεο για το κοντερ πώς βγαίνει

• 
  @mkoukoumides7 ай бұрын

  @@kritikos78 δεν θυμάμαι να έχω δει κάποιο σχετικό... Θα πρέπει να το ψάξεις.

• 
  @MsYouANDREATube8 ай бұрын

  3 questions How much, where did you buy it and why do these break?

• 
  @mkoukoumides7 ай бұрын

  Hi. The cost was approximately 5€. I bought it from a shop with spare parts for electrical appliances (not electrical equipment). The are multiple reasons for them to break. I mention few of them: 1. if it works without water for long time (e.g. if you forget to unplug it after work) 2. If it falls down while it is very hot 3. If working voltage is much higher than the nominal one. There are also many others....

• 
  @berna987449 ай бұрын

  Can I ask if this video for kitchen ceiling extractor fan? Because my extractor ceiling hood stopped responding to the remote control. Can you please confirm if this video can help? I called about 4 or 5 electricians and they have no idea it works or what the problem is. Can you help?

• 
  @mkoukoumides9 ай бұрын

  I believe that it would work but I can't be 100% sure since I don't know the kind of controller that it has.

• 
  @johnengineertech10 ай бұрын

  Good, straight to the point, no pointless chat!

• 
  @domdomalakazam463810 ай бұрын

  Yyyy aaaa yyyy eeeeee yyyyyy and yyyyyy

• 
  @khaledalabdala290810 ай бұрын

  I woulh like to ask u about the code up of the ic with 8 pins in the back of the controller pls

• 
  @mkoukoumides10 ай бұрын

  Hi. Unfortunately, I can't give you any information about that since it's not in my hands any more...

• 
  @christopherzeller776810 ай бұрын

  efkaristo😊....worked 💯%

• 
  @myothunaing633710 ай бұрын

  What was put on fingerprint on recording this video?

• 
  @mkoukoumides10 ай бұрын

  For white, a pack of 15 white post-it. For black, a black ssd case that I had on the desk.

• 
  @tejasraval5558 Жыл бұрын

  Thnak you so much

• 
  @jeetmondal4706 Жыл бұрын

  For me fod calibration not working means not opening

• 
  @mkoukoumides Жыл бұрын

  Hi please check the other comments too. Thank you!

• 
  @andrepontes4943 Жыл бұрын

  what kind of screwdriver did you use for the firwt screws?

• 
  @mkoukoumides Жыл бұрын

  As far as I remember, I used cross (or maybe torx I'm not sure....) . I remember though for sure that one of the screws ( I think the bottom one) had to be unscrewed by hand!

• 
  @rockeymental5448 Жыл бұрын

  Thank you brother for my time waste ☺️

• 
  @mkoukoumides Жыл бұрын

  I'm sorry to hear that. Most of the times, it works...

• 
  @rockeymental5448 Жыл бұрын

  And and band kar dalle video ko end kar bhaag ☺️

• 
  @user-ht9hp8tl8y Жыл бұрын

  Reboot after what i have to do???🤔

• 
  @mkoukoumides Жыл бұрын

  When the calibration is finished, you don't "go back" on the main menu. You press the power button and reboot the phone.

• 
  @marlay1928 Жыл бұрын

  Process failed at last but still worked. Idk how,😂 But thanks anyway 🙌

• 
  @mkoukoumides Жыл бұрын

  I'm sorry to hear that. It usually works...😕

• 
  @captaindaaku766811 ай бұрын

  Same

• 
  @kaungmyat348 Жыл бұрын

  Thanks sir My Mi mix4 was done 👍✅✅✅❤️❤️❤️

• 
  @lucacorrias9488 Жыл бұрын

  Hello, I saw that you are familiar with Piaggio X8. For a few days now, if I pull the left brake lever of my X8 250, the starter doesn't work (I have to use the right lever) and the stop doesn't come on. The button behind the lever should have broken Do you have a tutorial or other explanation to replace it and to understand the steps to replace it? Thank you!

• 
  @mkoukoumides Жыл бұрын

  Hi. Unfortunately I don't. I had the same problem and it came from a small switch located under the brake handler. I fixed it by placing a small plastic cup in addition to the one that is inside the switch. Perhaps next time I will make a video about this problem too...

• 
  @berkaycnty Жыл бұрын

  I am waiting for this video

• 
  @Winnipeg2024Ай бұрын

  Only the right lever allows me to start it on mine And only the right lever works the brake lights

• 
  @jackiephillips195 Жыл бұрын

  Wrong time to play that stupid music

• 
  @mkoukoumides Жыл бұрын

  I'm sorry. Couldn't find a better one...

• 
  @dhipakdas9049 Жыл бұрын

  Tnx a lot. It works on my Mi 9T.❤❤❤

• 
  @jomaranagao6042 Жыл бұрын

  He bro what black flat did you put on your phone?

• 
  @xPaxTon Жыл бұрын

  Thankyou so much brother!! you are a life saver ❤

• 
  @kelbee8974 Жыл бұрын

  Many thanks , helped a lot 👍👍👍

• 
  @hellboygamer5598 Жыл бұрын

  Thank you for home made Salution ❤

• 
  @francy7808 Жыл бұрын

  Cuando se apaga queda como encendido

• 
  @francy7808 Жыл бұрын

  Tengo el mismo problema,pero lo hice y funcionó, pero no me da la opción de standby queda como encendido en phono

• 
  @francy7808 Жыл бұрын

  Hola

• 
  @ronimondal3438 Жыл бұрын

  Parformance chart failed

• 
  @ronimondal3438 Жыл бұрын

  Only Last test failed

• 
  @mkoukoumides Жыл бұрын

  Sometimes you need more than 10 times to make it work. Make sure you don't have any protective glass on the screen cause it doesn't work with it.

• 
  @lucifermorningstar4503 Жыл бұрын

  Thanks this helped me another job done

• 
  @Shady_cx Жыл бұрын

  i have dc-z72, with the same problem, do you know if this would work on that?

• 
  @025jaganathank9 Жыл бұрын

  This technique is not working for my Redmi K20 pro

• 
  @mkoukoumides Жыл бұрын

  Sometimes you may need more than 10 times to make it work. Moreover, the material that you place over the sensor matters! I used about 20 pieces of small paper (those that use for notes) and a thick matte black object. I failed many times to record the video but trust me. It works!

• 
  @025jaganathank9 Жыл бұрын

  @@mkoukoumides thank you for such a great video and I hope it works for me too

• 
  @JMorris70 Жыл бұрын

  καλησπερα,το δοκιμασα κ μου βγαζι νερο απο εξω,μιπως φτεει που δεν ειχα λαστιχακι?,κ που βρισκω φλατσακι,ευχριστω

• 
  @mkoukoumides Жыл бұрын

  Σίγουρα χρειάζεται λαστιχάκι. Μπορείς να βρεις σε μαγαζί με υδραυλικά.

• 
  @JMorris70 Жыл бұрын

  @@mkoukoumides ναι αλλα βλεπω κ αλλα με διχως κ κανουν 8α παρω να δω,παντω;ς πρεπει να κοβετε καλυτερα οταν ειναι ζεστι

• 
  @mkoukoumides Жыл бұрын

  @@JMorris70 θέλει λεπτό λαστιχάκι αλλιως θα έχει άλλα προβλήματα... Θα σου πρότεινα να εξετάσεις και την εναλλακτική της ανοξείδωτης κάψουλας που πουλάνε σε AliExpress και eBay.