Thank-you so much for the video, I never knew how to remove them from the car 👍🇬🇧
@Bella-hz6yu2 жыл бұрын
So I want to do this but I don’t have a roll cage I have a 4 seater would I still be able to do this? Like do the seats fold so I can have people in the back?
@ag-hz7tt3 жыл бұрын
Looks great
@robertpugh52443 жыл бұрын
Hi Billy - Thanks for your video. I have a 2009 Cooper S and my friend and I have installed a cage, Racing seats and harnesses to make it a rally car. How did you tune off the seat belt alarm ??
@korey15763 жыл бұрын
My F60 S thanks you. GO GAMECOCKS!
@taadventures63123 жыл бұрын
What did you do with the seat belt and air bag sensor wires to not get codes and light on dash. Nice build.
@StefanieLozada3 жыл бұрын
Hi i want to paint mine neo chrome any suggestions would be great
@rogerwang05233 жыл бұрын
dear sir, does it have any turbo lagging issue after a bigger intercooler is installed for R56? need any ECU programming modified at same time?
@enduquads4 жыл бұрын
Do you have any problems assembling the slider and bracket to the seat? I am assembling my R56 seats bought a R100 Sparco but the brackets did not fit well.
@slyrhythm64714 жыл бұрын
Thank you!!!!!
@jackstanley28494 жыл бұрын
Is your seat the Sparco R100 seat?
@aaronmedrano34934 жыл бұрын
Where did you buy these seats?
@PaceEdits6664 жыл бұрын
Love the seats,going for those in mine but you do realise it's dangerous to run harneses on a reclining bucket seat if you have an accident?
@nicholasdelgado1754 жыл бұрын
Pace Edits what’s seats are they
@PaceEdits6664 жыл бұрын
@@nicholasdelgado175 sparco r100
@nicholasdelgado1754 жыл бұрын
I know but are they the vinyl ones?
@khaellister29283 жыл бұрын
Sparco say u can run harness on this seat so its all good
@PaceEdits6663 жыл бұрын
@@khaellister2928its well known to not run harneses on reclining seats
@cloverasx4 жыл бұрын
I'm liking the build, and subbing to see what else you do with it! I have a 2012 MCS with pretty much the same stuff as you, with the only major difference being I have the RPM Power Stage 2 Tune (MarioKart from NAM is great to work with). One thing I'd check into if I were you - from what I've read, the safest place to have your shoulder restraints mounted is supposed to be the roll cage. I think this is mainly due to the angle, which because you have it over the mid bar and it keeps the angle ideal (not pulling down), I think it's still good. Still you might check into seeing if it'd be better/safer if you just have the fabric doubled over to mount to the bar itself instead of dropping down to mount to the floor. Otherwise, I'm just upset that I only just now saw your video! I hope you get the build where you want it!
@Gamboa964 жыл бұрын
Hello! What do you guys think of this intercooler from ebay? i ordered it, i have a mcs r56 07. hope you can help :) thanks www.ebay.com/itm/ALUMINIUM-FRONT-MOUNT-INTERCOOLER-KIT-FMIC-FOR-BMW-MINI-COOPER-S-R56-R57-R58/181038993711?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
@jdespi70935 жыл бұрын
Where's the videos at brother?
@billycolquitt33105 жыл бұрын
More to come soon :)
@thesquidhq16675 жыл бұрын
Omg xD
@sirus7485 жыл бұрын
What a nut job !!!!!!!!!!!!!!
@Orod56945 жыл бұрын
Very nice 😎 how do you bypass the codes? I want to do the same but I dont want the mini to throw an airbag or seatbelt code
@billycolquitt33105 жыл бұрын
It doesn't throw any "codes" only thing is the red light on your speedometer that says you are not buckled. Just make sure when you are taking the seat out just make sure your battery isn't plugged in 😁
@Orod56945 жыл бұрын
Perfect 😎 thanks
@billycolquitt33105 жыл бұрын
No problem😁
@MacLaw30843 жыл бұрын
from what understand there is a way to keep that light from showing in the dash by using a resistor or something. idk im not good with electrical work. check the forums.
@alansari19853 жыл бұрын
@@MacLaw3084 2.2 resistant
@jamest.10955 жыл бұрын
Which roll cage is that?
@billycolquitt33105 жыл бұрын
It's a Sneed4speed r56 roll cage 😁
@JonathanBruney5 жыл бұрын
Gamecock Club Member !! I have that on my Mini too!
@billycolquitt33105 жыл бұрын
That's awesome maybe I'll see you around 😁
@equaliser22655 жыл бұрын
Nice one Billy. Mine is garaged till the summer , can't wait to get her out again. Keep up the vids.
@billycolquitt33105 жыл бұрын
Thank you and sounds awesome I couldn't wait either!
@briannamichelle25715 жыл бұрын
Lameo ❤️
@jamesbutton50365 жыл бұрын
What's been done to that exhaust?
@billycolquitt33105 жыл бұрын
Catless downpipe and no resonator that's it but soon will have a complete 3" exhaust
@equaliser22655 жыл бұрын
Glad to see you back matey. seats are great looks nice, easy to keep clean, good choice.
@billycolquitt33105 жыл бұрын
Thank you I'm very excited to get these bad boys in
@PedroSanchez-ky4vk5 жыл бұрын
How much was the tune?
@billycolquitt33105 жыл бұрын
The tune was 500 for stage 2
@equaliser22655 жыл бұрын
Woo mate are they tasty, those cold things, what are they? Car sounds great nothing like that in Uk or Kosovo.
@billycolquitt33105 жыл бұрын
Yeah they are lol it's like a snow cone and yes it really does makes the car sound alive and like a gun 😅😂
@billycolquitt33105 жыл бұрын
Or it's the dragon Ball things you're talking about not 100% sure
@equaliser22655 жыл бұрын
Nothing bad Billy, no probs, wheel lugs look cool, just got magnaflow cat back fitted sound nice, pops nice on the overrun.
@billycolquitt33105 жыл бұрын
Thank you and awesome hopefully very soon I will be getting new exhaust will be talked about in the next video but it's going to be awesome!
@equaliser22655 жыл бұрын
I've got the R53 S just got the airtec all black top mounted intercooler, as I had a %17 supercharger pulley reduction and colder plugs NGK. Runs very nice now, 2003 only 50,000 miles. Cheers
@billycolquitt33105 жыл бұрын
That's really good my father has about that as well how much do you make ?
@equaliser22655 жыл бұрын
@@billycolquitt3310 No idea Billy never got it on the dyno, something for a future date. What do you estimate..?
@billycolquitt33105 жыл бұрын
Maybe 260ish?
@equaliser22655 жыл бұрын
@@billycolquitt3310 Thanks Billy when I get it dynod I let you know how close you were.
@briannamichelle25715 жыл бұрын
yooo
@equaliser22655 жыл бұрын
Nice video matey enjoyed the energy.
@billycolquitt33105 жыл бұрын
Thank you :)
@belovedLion805 жыл бұрын
Mine was the stupid wires on the BOV and it cost me 50$ to fix!
@billycolquitt33105 жыл бұрын
Nice lol I'm not sure that's what mine is mines something with the cam sensors. Not sure what it is sadly need to do some research :)
@billycolquitt33105 жыл бұрын
Mine was a timing problem so new timing chain yay..
@briannamichelle25715 жыл бұрын
boy don’t record and drive smh
@billycolquitt33105 жыл бұрын
BETTTTTTT ❤❤😊
@ashton3705 жыл бұрын
I missed billy.
@billycolquitt33105 жыл бұрын
Missing you guys too :)
@billycolquitt33105 жыл бұрын
Coming back
@Valxy5 жыл бұрын
1st
@billycolquitt33105 жыл бұрын
:)
@DavidBowen5 жыл бұрын
Did you use the same two (2) bolts that the OEM cooler used to attach? Or did you just use the clamps to the tubing to hold it into place? Not sure that's the best idea.????
@billycolquitt33105 жыл бұрын
I didn't use any bolts from the oem one I let it sit there because the front bar and the bumper hold it in place and I've had no problems with it :)
@belovedLion805 жыл бұрын
Your license plate is dope! “In God we trust”
@billycolquitt33105 жыл бұрын
Thank you :)
@belovedLion805 жыл бұрын
Jesus said “why stop at one thank you” no, thank you!!
@billycolquitt33105 жыл бұрын
:)
5 жыл бұрын
Great videos! Keep going.
@billycolquitt33105 жыл бұрын
Thank you will have more coming out soon with updates on the beast:)
@billycolquitt33105 жыл бұрын
THE STORM IS COMING BACK SOON 😏🌪
@MyTmou56 жыл бұрын
Have you had any issues with the intercooler since the video. I just received the exact same intercooler. Im a little concerned about the lack of mounting brackets.
@billycolquitt33106 жыл бұрын
Nope just make sure the intercooler pipes are tight and it stays in there pretty well against the bumper :)
@MyTmou56 жыл бұрын
@@billycolquitt3310 thanks for the info. I hope things are going well with the repairs on yours. I'm going to be rebuilding my turbo this weekend, adding a catless down pipe, same hood scoop as you did, installing the intercooler and upgrading all the tubing for forced induction.
@billycolquitt33106 жыл бұрын
Thank you hopefully will be making a video soon on the car updated alot is happening behind the scenes and I hope yours goes well just remember to be patience and have fun 😁. Also hit the subscription button 😉
@Glitzgamer2346 жыл бұрын
Awesome vlog u should do more
@moritzobenaus72766 жыл бұрын
hey buddy i’m lookin into buying a cheap ebay intercooler as well. can you recommend it or have you any stats how you intake temp has changed? thanks a lot! cheers, mo
@billycolquitt33106 жыл бұрын
The temp on this change by 5 degrees with the test i did and I think it helps slot with the turbo and really recommend you to upgrade
@ryan-rj7wn6 жыл бұрын
Boo bring back Wizard101
@ryan-rj7wn6 жыл бұрын
Boo bring back minecraft
@medul10alpha316 жыл бұрын
MODS FOLDER RELEASE ;) not Minecraft
@billycolquitt33106 жыл бұрын
My gosh 😂
@ryan-rj7wn6 жыл бұрын
paint your cpu
@billycolquitt33106 жыл бұрын
No you 😂😂
@medul10alpha316 жыл бұрын
Yey
@zerotrigger95326 жыл бұрын
yoooo, you should do some dirt biking with a gopro
Пікірлер
Thank-you so much for the video, I never knew how to remove them from the car 👍🇬🇧
So I want to do this but I don’t have a roll cage I have a 4 seater would I still be able to do this? Like do the seats fold so I can have people in the back?
Looks great
Hi Billy - Thanks for your video. I have a 2009 Cooper S and my friend and I have installed a cage, Racing seats and harnesses to make it a rally car. How did you tune off the seat belt alarm ??
My F60 S thanks you. GO GAMECOCKS!
What did you do with the seat belt and air bag sensor wires to not get codes and light on dash. Nice build.
Hi i want to paint mine neo chrome any suggestions would be great
dear sir, does it have any turbo lagging issue after a bigger intercooler is installed for R56? need any ECU programming modified at same time?
Do you have any problems assembling the slider and bracket to the seat? I am assembling my R56 seats bought a R100 Sparco but the brackets did not fit well.
Thank you!!!!!
Is your seat the Sparco R100 seat?
Where did you buy these seats?
Love the seats,going for those in mine but you do realise it's dangerous to run harneses on a reclining bucket seat if you have an accident?
Pace Edits what’s seats are they
@@nicholasdelgado175 sparco r100
I know but are they the vinyl ones?
Sparco say u can run harness on this seat so its all good
@@khaellister2928its well known to not run harneses on reclining seats
I'm liking the build, and subbing to see what else you do with it! I have a 2012 MCS with pretty much the same stuff as you, with the only major difference being I have the RPM Power Stage 2 Tune (MarioKart from NAM is great to work with). One thing I'd check into if I were you - from what I've read, the safest place to have your shoulder restraints mounted is supposed to be the roll cage. I think this is mainly due to the angle, which because you have it over the mid bar and it keeps the angle ideal (not pulling down), I think it's still good. Still you might check into seeing if it'd be better/safer if you just have the fabric doubled over to mount to the bar itself instead of dropping down to mount to the floor. Otherwise, I'm just upset that I only just now saw your video! I hope you get the build where you want it!
Hello! What do you guys think of this intercooler from ebay? i ordered it, i have a mcs r56 07. hope you can help :) thanks www.ebay.com/itm/ALUMINIUM-FRONT-MOUNT-INTERCOOLER-KIT-FMIC-FOR-BMW-MINI-COOPER-S-R56-R57-R58/181038993711?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Where's the videos at brother?
More to come soon :)
Omg xD
What a nut job !!!!!!!!!!!!!!
Very nice 😎 how do you bypass the codes? I want to do the same but I dont want the mini to throw an airbag or seatbelt code
It doesn't throw any "codes" only thing is the red light on your speedometer that says you are not buckled. Just make sure when you are taking the seat out just make sure your battery isn't plugged in 😁
Perfect 😎 thanks
No problem😁
from what understand there is a way to keep that light from showing in the dash by using a resistor or something. idk im not good with electrical work. check the forums.
@@MacLaw3084 2.2 resistant
Which roll cage is that?
It's a Sneed4speed r56 roll cage 😁
Gamecock Club Member !! I have that on my Mini too!
That's awesome maybe I'll see you around 😁
Nice one Billy. Mine is garaged till the summer , can't wait to get her out again. Keep up the vids.
Thank you and sounds awesome I couldn't wait either!
Lameo ❤️
What's been done to that exhaust?
Catless downpipe and no resonator that's it but soon will have a complete 3" exhaust
Glad to see you back matey. seats are great looks nice, easy to keep clean, good choice.
Thank you I'm very excited to get these bad boys in
How much was the tune?
The tune was 500 for stage 2
Woo mate are they tasty, those cold things, what are they? Car sounds great nothing like that in Uk or Kosovo.
Yeah they are lol it's like a snow cone and yes it really does makes the car sound alive and like a gun 😅😂
Or it's the dragon Ball things you're talking about not 100% sure
Nothing bad Billy, no probs, wheel lugs look cool, just got magnaflow cat back fitted sound nice, pops nice on the overrun.
Thank you and awesome hopefully very soon I will be getting new exhaust will be talked about in the next video but it's going to be awesome!
I've got the R53 S just got the airtec all black top mounted intercooler, as I had a %17 supercharger pulley reduction and colder plugs NGK. Runs very nice now, 2003 only 50,000 miles. Cheers
That's really good my father has about that as well how much do you make ?
@@billycolquitt3310 No idea Billy never got it on the dyno, something for a future date. What do you estimate..?
Maybe 260ish?
@@billycolquitt3310 Thanks Billy when I get it dynod I let you know how close you were.
yooo
Nice video matey enjoyed the energy.
Thank you :)
Mine was the stupid wires on the BOV and it cost me 50$ to fix!
Nice lol I'm not sure that's what mine is mines something with the cam sensors. Not sure what it is sadly need to do some research :)
Mine was a timing problem so new timing chain yay..
boy don’t record and drive smh
BETTTTTTT ❤❤😊
I missed billy.
Missing you guys too :)
Coming back
1st
:)
Did you use the same two (2) bolts that the OEM cooler used to attach? Or did you just use the clamps to the tubing to hold it into place? Not sure that's the best idea.????
I didn't use any bolts from the oem one I let it sit there because the front bar and the bumper hold it in place and I've had no problems with it :)
Your license plate is dope! “In God we trust”
Thank you :)
Jesus said “why stop at one thank you” no, thank you!!
:)
Great videos! Keep going.
Thank you will have more coming out soon with updates on the beast:)
THE STORM IS COMING BACK SOON 😏🌪
Have you had any issues with the intercooler since the video. I just received the exact same intercooler. Im a little concerned about the lack of mounting brackets.
Nope just make sure the intercooler pipes are tight and it stays in there pretty well against the bumper :)
@@billycolquitt3310 thanks for the info. I hope things are going well with the repairs on yours. I'm going to be rebuilding my turbo this weekend, adding a catless down pipe, same hood scoop as you did, installing the intercooler and upgrading all the tubing for forced induction.
Thank you hopefully will be making a video soon on the car updated alot is happening behind the scenes and I hope yours goes well just remember to be patience and have fun 😁. Also hit the subscription button 😉
Awesome vlog u should do more
hey buddy i’m lookin into buying a cheap ebay intercooler as well. can you recommend it or have you any stats how you intake temp has changed? thanks a lot! cheers, mo
The temp on this change by 5 degrees with the test i did and I think it helps slot with the turbo and really recommend you to upgrade
Boo bring back Wizard101
Boo bring back minecraft
MODS FOLDER RELEASE ;) not Minecraft
My gosh 😂
paint your cpu
No you 😂😂
Yey
yoooo, you should do some dirt biking with a gopro
That would be fun if I had a diet bike lol
second
firstly ❤️