Пікірлер

• 
  @williambrecht45013 күн бұрын

  Thanks mate for teaching me the proper way!

• 
  @bourbon_sketcherАй бұрын

  Until the 'eleets' and 'politishions' gave it all away to their @gend@s.

• 
  @steveroganАй бұрын

  Oh that’s 8 minutes of my life I’m not getting back.

• 
  @Charlie_Crown2 ай бұрын

  Miss your uploads Malc, nice short, hope you are keeping well 👍

• 
  @llordllama2 ай бұрын

  Having grown up in Lincolnshire, I feel robbed of the (non-sausage) banger experience in my youthful experiences! 😀 Tis still a beautiful place to return to though, as I love popping back to hike around the county!

• 
  @ToniLoring3 ай бұрын

  Very informative Thank you. 😊

• 
  @chrystina56043 ай бұрын

  I take it that you are using a balast coil otherwise you would need a resistor. Am I right or wrong?

• 
  @jodienewton92133 ай бұрын

  Is that Brian newton 470 yellow black and red car "Team Newton" . Hard to make out.

• 
  @paulcrisp98613 ай бұрын

  So proud to be a LINCOLNSHIRE YELLOW BELLY and the county anthem THE LINCOLNSHIRE POACHER 👍😎👍🔴⚪️🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧 Apr twenty four ✨️

• 
  @rjdavey683 ай бұрын

  Another one Saltfleetby. Not pronounced Saltfleetbee like Whitby or other Viking origin names, but either Saltfleetbuy or Sollobee (Saloby) by locals.

• 
  @redcruben3 ай бұрын

  If you chared the wood before you poured the metal it might help as the wood was probably damp causing a lot of steam, jewlers use charred wood to cast silver ingots, interesting video well done

• 
  @jayhemmantcricket3 ай бұрын

  Proud to be living in Lincolnshire, its a beautiful county. Greetings from South Holland.

• 
  @jimgagne38015 ай бұрын

  HaHaahahaaa ! your using a Lucas switch ! Dim, Flicker, Off ! Sorry, I'm a Triumph Chopper Guy.

• 
  @scottbartram55965 ай бұрын

  This is a very good video malc

• 
  @scottbartram55965 ай бұрын

  Great video malc wish you would make even more of these very interesting and helpful aswell.

• 
  @ScottandTera5 ай бұрын

  awesome

• 
  @TheThorns6 ай бұрын

  Come check out my recreation of this on my channel.

• 
  @johnshaw80136 ай бұрын

  Can you do a video on the various service and diagnostics functions. Where can I find commisioning and fault checking manuals?

• 
  @stephenborsbey43506 ай бұрын

  Good for folk going from electronic ignition back to fitting points etc. Thanks.

• 
  @ArthurLSmithJr6 ай бұрын

  Best wishes Malc, I miss your story's and your tinkering. Hope you're well mate.

• 
  @johantenhove77707 ай бұрын

  Cheers for showing. I needed the info for a 460. It would be nice if we got a better look on the inside. Either way: i'll try it and fingers crossed. Warm regards from the Netherlands.

• 
  @G4ngViol3nc37 ай бұрын

  1min and 30 seconds and all my questions were answered God bless

• 
  @desialisia7 ай бұрын

  Io ho una caldaia junkers cerastar zwe 24-4 ha23 non arriva la corrente 220v all'estrattore fumi ho testato i fili e sono ok ho testato dove attacca lo spinotto alla scheda dei fili estrattore fumi non esce la 220v dalla scheda proprio ho provato con un altra scheda identica stesso difetto qualcuno puoi aiutarmi puo essere ke la scheda ke mi hanno dato ha lo stesso problema ho testato i rele della scheda e i contatti funzionano ho provato la 220 diretta sullestrattore fumi e funziona accende la caldaia perfettamente cosa puo essere ki mi puo aiutare se

• 
  @desialisia7 ай бұрын

  desialisia 0 secondi fa Io ho una caldaia junkers cerastar zwe 24-4 ha23 non arriva la corrente 220v all'estrattore fumi ho testato i fili e sono ok ho testato dove attacca lo spinotto alla scheda dei fili estrattore fumi non esce la 220v dalla scheda proprio ho provato con un altra scheda identica stesso difetto qualcuno puoi aiutarmi puo essere ke la scheda ke mi hanno dato ha lo stesso problema ho testato i rele della scheda e i contatti funzionano ho provato la 220 diretta sullestrattore fumi e funziona accende la caldaia perfettamente cosa puo essere ki mi puo aiutare se

• 
  @desialisia7 ай бұрын

  desialisia 0 secondi fa Io ho una caldaia junkers cerastar zwe 24-4 ha23 non arriva la corrente 220v all'estrattore fumi ho testato i fili e sono ok ho testato dove attacca lo spinotto alla scheda dei fili estrattore fumi non esce la 220v dalla scheda proprio ho provato con un altra scheda identica stesso difetto qualcuno puoi aiutarmi puo essere ke la scheda ke mi hanno dato ha lo stesso problema ho testato i rele della scheda e i contatti funzionano cosa puo essere ki mi puo aiutare

• 
  @desialisia7 ай бұрын

  Io ho una caldaia junkers cerastar zwe 24-4 ha23 non arriva la corrente 220v all'estrattore fumi ho testato i fili e sono ok ho testato dove attacca lo spinotto alla scheda dei fili estrattore fumi non esce la 220v dalla scheda proprio ho provato con un altra scheda identica stesso difetto qualcuno puoi aiutarmi puo essere ke la scheda ke mi hanno dato ha lo stesso problema ho testato i rele della scheda e i contatti funzionano cosa puo essere ki mi puo aiutare

• 
  @whathasxgottodowithit3919.8 ай бұрын

  Any deficiencies noted with a Nuffield compared to a Fordson Major are usually down to operator error. Nuffield were making a modern tractor when Ford were still making the "Sit Up & Beg" E27

• 
  @Franco-zk8yy8 ай бұрын

  ❤

• 
  @TheThorns8 ай бұрын

  I may have to try this setup and put a modern twist on it.

• 
  @RustyInventions-wz6ir8 ай бұрын

  Just found your channel and Subscribed. Nice work.

• 
  @hannabellesotto8 ай бұрын

  Yeah you in the year of the baby jake film still on air

• 
  @hannabellesotto8 ай бұрын

  In 2011 thats where the baby jake show is filmed

• 
  @bondjovi45958 ай бұрын

  Really helpful. Will be doing this to my gs500 motorcycle.

• 
  @miltheger83149 ай бұрын

  OMG. I'm dizzy. :P

• 
  @gillesbillault15159 ай бұрын

  Thanks for your presentation Yours Faithfully

• 
  @that1guy211610 ай бұрын

  Hi malc it's me from the park

• 
  @arae758710 ай бұрын

  That, Malc, was a 3.6 volt 6500mah battery. Was.😳

• 
  @PhilCulmer10 ай бұрын

  Thanks Malc - not sure I'll ever get the opportunity to use the knowledge, but I'd been wondering how one used the guillotine gate.

• 
  @pappuraja706010 ай бұрын

  odear karne mo no to do

• 
  @mikejurcisek354111 ай бұрын

  Malc ,How are you?

• 
  @seahorseist11 ай бұрын

  Excellent video My lister d seems to run ok but jumps about on the trolley I will check my adjuster to see if this helps to smooth it out thanks

• 
  @TheBest-rg8sq11 ай бұрын

  Could you tell me please what these watches names and what for in the switch box I just saw one it’s written on it oil what the rest for ?

• 
  @TonyM54011 ай бұрын

  Your accent got a thumbs up from me immediately, if I could give you another for the video I would. Nice working Tilley. Thanks for sharing.

• 
  @mervyncave526311 ай бұрын

  Only draw back of this model is the pto engaged before the hydraulic pump which can make things tricky with mounted pto driven implements like a rotary hoe. Problem not fixed until the 460 which still had only 4 working gears and a road gear. Owned both, 460 had add on power steering. Now have Leyland 344 with loader as garden tractor. Was a great haymaking machine but in comparison to the Universal and 460 couldn’t pull the skin off a rice pudding.

• 
  @heatherpinnegar7472 Жыл бұрын

  Hi malc are you ok not heard from you in long time,

• 
  @alexgallegos1154 Жыл бұрын

  One of the best explanations ever. Thanks!!!

• 
  @EIKLURAM Жыл бұрын

  What it it's a positive ground? Does the live of the coil go to the points and the SW go to a capacitor and to the negetive side of the battery?

• 
  @carljones8022 Жыл бұрын

  If its the 9th worst destination then "don't f@#king come!" 😀

• 
  @MrBlueSoup6 Жыл бұрын

  I met Malc at the Arboretum today and can confirm to concerned commenters he's doing alright but has a shoulder injury at the moment. Lovely to chat with you and hope your shoulder heals soon - Tom x

• 
  @zedman442 Жыл бұрын

  That’s good to know. Get well soon Malc!

• 
  @jordanbell620 Жыл бұрын

  Thank you for letting us all know! Good to hear an update, and hope to see malc soon.

• 
  @on_the_mooch270810 ай бұрын

  Good to hear, been wondering about malc always enjoy his videos.

• 
  @andrewfink8725 Жыл бұрын

  Does the condenser make a bigger or smaller spark?

• 
  @ianrobinson95652 ай бұрын

  The condenser does 2 things. It acts as a spark quench to stop the points burning and the second thing it does is helps the magnetic field collapse faster which gives a crisp clean spark. Old mates video and explanation is absolutely 💯 correct. The only thing I would question is his coil. If you are working on an older English type car then your ignition system is +ve ground. Lucas coils were wound for positive ground. That also gave the auto transformer action which improved the spark. In a nutshell everything must line up. +ve ground battery. Generator polarised to +ve ground. Coil is wound for positive ground, (negative spark)and wired as follows. SW to battery. CB (contact breaker) to side of distributor. Ask questions if this helps. 50 years doing this.