Yes it was the operators first week. It’s rare to find employers that take the time and money to train new operators. Good on them
@brendanfennell355219 күн бұрын
This is a Chinese Built 4x4 ATV it is Built by Shandong Odes Industry Company in China , when the "Kiwi" Engineers went to China looking for an All Terrain ATV for Farming and Deer Hunting in NZ they used their Engineering Knowhow to add Dual Diff locking for the front and rear drives and added other design ideas to meet their needs in New Zealand , and has proved popular in NZ and Australia and the USA Markets and because it is built of steel it is more durable , than some tubular frame ATV's and the Engine is built under license in China , which is why the Russian Army has ordered 1500 units for troop movement in Eastern Ukraine and they have received some 600 units which are now on the battlefield as seen by Viewers of mobile phone footage on the Russian telegraph channels
@mountainforestryequipment847719 күн бұрын
That’s really interesting. Thanks for the info!
@jasongerbrandt757726 күн бұрын
That's Going to be an awesome head. Looks really sharp.
@valdezmartins8116Ай бұрын
Top,👏
@FsdloggingАй бұрын
O I didn’t realize there were people that are queer enough to like jd but hate tigercat
@FsdloggingАй бұрын
They are worried weiler is taking more of there designs again like that skidder
@randybordeleau5963Ай бұрын
Way to much tail swing
@bobmartin60552 ай бұрын
Nice machine
@dustyroads8342 ай бұрын
I was hoping to see the new dozer Tigercat is making.
@mountainforestryequipment84772 ай бұрын
Its been out for quite a while now, I will try to get a video of it the next time it’s at a show!
@HubertofLiege2 ай бұрын
Neat take on seeing your tracks until it doesn’t work. Looks like a good yard machine.
@Hennes0032 ай бұрын
There will be just hogfuel left by the time he is done.
@peterdavison2032 ай бұрын
Chery motor John Deere use them as well as others,better gearbox than the CVT rubbish THC EV version is very good loads of dick spaced but expensive
@myloggermag2 ай бұрын
Thanks for the video. Some really neat machines on that stand. Tigercat goes big most of the times
@clipperprospecting84452 ай бұрын
Hey.. Maybe the Ndp will be there handing out grants…….
@AA-tb4ff2 ай бұрын
oh they finally copied the hood jd had twenty years ago and timberjack had before that. just copy a 953 and paint it yellow and you guys will finally have a good machine. The 618 is better than i tigercat
@norWISequipment2 ай бұрын
No track pumps or swing pumps on a buncher?
@richmenchinella24983 ай бұрын
Takes FOREVER to thaw out the thick windshields
@hurkadurk3 ай бұрын
Did kenworth take over Pacific? because it looks identical to a Pacific P16
@mountainforestryequipment84773 ай бұрын
There are a number of differences between it and a Pacific. The easiest to identify is the hood.
@hurkadurk3 ай бұрын
@@mountainforestryequipment8477I see it now. Did kenworth take over the design though? when pacific stopped? because you have to admit if they pass you at 30 you can hardly tell lmao. absolutely love both machines though.
@mountainforestryequipment84773 ай бұрын
@@hurkadurkThere was quite a few manufacturers competing for the off-highway market share in that era. Hayes, Pacific, Kenworth, and Mack are the most popular. And even a few Euclid/Terex converted single axle rock trucks. The Mack’s and Terex’s were the only ones that looked significantly different.
@36handy2 ай бұрын
No. That’s a pacific or a hays. Kenworth never made an off-road logging truck of that size.
@mountainforestryequipment84772 ай бұрын
@@36handyA quick Google search will prove you wrong. I’m not enough of a Kenworth buff to know what dates they manufactured them from and when they finished. I’m guessing the last one left the factory in the late 70’s or early 80’s
@jeeploggernz22893 ай бұрын
Lots of Eltecs over here in NZ now
@mountainforestryequipment84773 ай бұрын
They seem to be really growing their market share. Good gear and they listen to their customers
@jeeploggernz22893 ай бұрын
Dam that is real nice, i got an earlier 277 non level woodsman felling head and absolutely love it to bits, gets the job done
@ThebluecollarboyzALL-IN3 ай бұрын
Nice 830
@FDRLogging3 ай бұрын
thats super weird, I had no problem filming every inch of their machines at another event, they encouraged it, maybe you just caught one oddball guy
@markfarrell87213 ай бұрын
Fuck wit alert 😂
@mountainforestryequipment84773 ай бұрын
😂
@scottdahl39753 ай бұрын
nice tigercat!!!
@ymerxhepa46784 ай бұрын
MAKINERI TË FUQISHME
@ChrisShultis4 ай бұрын
First off, they can’t make you turn your camera off!
@toomasmetsniit96494 ай бұрын
😊Hurraa ✌️ Good work
@timothymiller-99204 ай бұрын
International gettin it done 👍
@gordo18404 ай бұрын
Why stop the filming?. The machine is now out there, it’s no longer a concept or Drawing. Seems like a bad judgement call by the Tigercat employee. Tigercat does build great quality tracked machines maybe only rivalled in the mainstream by JD. Why put it on show if you’re that worried.
@ponsseguy4 ай бұрын
While tigercat does seem to manufacture high quality equipment a d continues to innovate in some sectors of the market, it seems they're starting to forget how they got to where they are. Bullying people into shutting off cameras is kinda dumb. I mean any company that wanted to copy that machine can just buy one if they want to look at it, and if you're a company that has interest in copying that design you probably have the money to buy one. Besides all that, unless they never plan to sell these machines, it's only a matter of time til they get out in the bush where Mr engineer isn't there to tell folks not to video the machine.
@mountainforestryequipment84774 ай бұрын
Agreed!
@masaharumorimoto47614 ай бұрын
lol, ya I suspect everyone in engineering is paranoid about china stealing the design, 1 dude with a phone sends the video to the factory in china and boom lol.
@halcon21344 ай бұрын
Goog machines. change gears before or you will wreck the truck.
@RaymondMooney-xd2ug4 ай бұрын
If it ant gruntin, it ant workn
@jonpietruszewski52404 ай бұрын
Finally a IHC that's what I run
@tomlambert18334 ай бұрын
Tigercat buncher
@andrewmcroy94824 ай бұрын
Yeah if you hit the hill with a little bit more speed it would have been better but he was able to save it so my hats off to this guy
@Mr.Filson4 ай бұрын
Where’s the Heavy Haul, that bunches only 72k
@mountainforestryequipment84774 ай бұрын
It’s 85,000 all Day
@steelcityperformancesaws4 ай бұрын
Yup 76 maybe 78 with the head
@jimdodge57664 ай бұрын
Hit the hill with a little more steam dude
@jamespoirier98334 ай бұрын
Do you know how much a bunch of weighs He’s doing all right that hell could’ve been 10 km long and he’s at the top
@leonardryan87234 ай бұрын
Have to buy auto transmission for the operator 😮
@normanjones80894 ай бұрын
Mighty nice machine there. One can get a lot of work done in a days time.
@rockridgewoodshop4 ай бұрын
3406 or a Big Cam 400
@jcchristopher78274 ай бұрын
Sounds like a Cummins like n14 red top or newer
@realtree2974 ай бұрын
Awful low RPM, must be a cat motor
@user-ek5xb3fg3o5 ай бұрын
У меня от " дайхацу" есть двигатель K3WE. Надо собрать такой грузовичок.
@GIUL73015 ай бұрын
Tough hauling, I construct bridges and coverts for logging roads in Oregon.
@Mark-vd8oi5 ай бұрын
GREAT EQUIPTMENT TO HAVE.
@joshblack58105 ай бұрын
Should have cleaned your tracks
@mountainforestryequipment84775 ай бұрын
Offroad Haul
@UltraMagaFan5 ай бұрын
Who cares? Loggers can’t afford to lose money. They’re just gonna put the feller buncher immediately back to work when they get to the next job site. It’s gonna get dirty again.
Пікірлер
Awesome Machines Really well built.
First day on the job. Not very good
Yes it was the operators first week. It’s rare to find employers that take the time and money to train new operators. Good on them
This is a Chinese Built 4x4 ATV it is Built by Shandong Odes Industry Company in China , when the "Kiwi" Engineers went to China looking for an All Terrain ATV for Farming and Deer Hunting in NZ they used their Engineering Knowhow to add Dual Diff locking for the front and rear drives and added other design ideas to meet their needs in New Zealand , and has proved popular in NZ and Australia and the USA Markets and because it is built of steel it is more durable , than some tubular frame ATV's and the Engine is built under license in China , which is why the Russian Army has ordered 1500 units for troop movement in Eastern Ukraine and they have received some 600 units which are now on the battlefield as seen by Viewers of mobile phone footage on the Russian telegraph channels
That’s really interesting. Thanks for the info!
That's Going to be an awesome head. Looks really sharp.
Top,👏
O I didn’t realize there were people that are queer enough to like jd but hate tigercat
They are worried weiler is taking more of there designs again like that skidder
Way to much tail swing
Nice machine
I was hoping to see the new dozer Tigercat is making.
Its been out for quite a while now, I will try to get a video of it the next time it’s at a show!
Neat take on seeing your tracks until it doesn’t work. Looks like a good yard machine.
There will be just hogfuel left by the time he is done.
Chery motor John Deere use them as well as others,better gearbox than the CVT rubbish THC EV version is very good loads of dick spaced but expensive
Thanks for the video. Some really neat machines on that stand. Tigercat goes big most of the times
Hey.. Maybe the Ndp will be there handing out grants…….
oh they finally copied the hood jd had twenty years ago and timberjack had before that. just copy a 953 and paint it yellow and you guys will finally have a good machine. The 618 is better than i tigercat
No track pumps or swing pumps on a buncher?
Takes FOREVER to thaw out the thick windshields
Did kenworth take over Pacific? because it looks identical to a Pacific P16
There are a number of differences between it and a Pacific. The easiest to identify is the hood.
@@mountainforestryequipment8477I see it now. Did kenworth take over the design though? when pacific stopped? because you have to admit if they pass you at 30 you can hardly tell lmao. absolutely love both machines though.
@@hurkadurkThere was quite a few manufacturers competing for the off-highway market share in that era. Hayes, Pacific, Kenworth, and Mack are the most popular. And even a few Euclid/Terex converted single axle rock trucks. The Mack’s and Terex’s were the only ones that looked significantly different.
No. That’s a pacific or a hays. Kenworth never made an off-road logging truck of that size.
@@36handyA quick Google search will prove you wrong. I’m not enough of a Kenworth buff to know what dates they manufactured them from and when they finished. I’m guessing the last one left the factory in the late 70’s or early 80’s
Lots of Eltecs over here in NZ now
They seem to be really growing their market share. Good gear and they listen to their customers
Dam that is real nice, i got an earlier 277 non level woodsman felling head and absolutely love it to bits, gets the job done
Nice 830
thats super weird, I had no problem filming every inch of their machines at another event, they encouraged it, maybe you just caught one oddball guy
Fuck wit alert 😂
😂
nice tigercat!!!
MAKINERI TË FUQISHME
First off, they can’t make you turn your camera off!
😊Hurraa ✌️ Good work
International gettin it done 👍
Why stop the filming?. The machine is now out there, it’s no longer a concept or Drawing. Seems like a bad judgement call by the Tigercat employee. Tigercat does build great quality tracked machines maybe only rivalled in the mainstream by JD. Why put it on show if you’re that worried.
While tigercat does seem to manufacture high quality equipment a d continues to innovate in some sectors of the market, it seems they're starting to forget how they got to where they are. Bullying people into shutting off cameras is kinda dumb. I mean any company that wanted to copy that machine can just buy one if they want to look at it, and if you're a company that has interest in copying that design you probably have the money to buy one. Besides all that, unless they never plan to sell these machines, it's only a matter of time til they get out in the bush where Mr engineer isn't there to tell folks not to video the machine.
Agreed!
lol, ya I suspect everyone in engineering is paranoid about china stealing the design, 1 dude with a phone sends the video to the factory in china and boom lol.
Goog machines. change gears before or you will wreck the truck.
If it ant gruntin, it ant workn
Finally a IHC that's what I run
Tigercat buncher
Yeah if you hit the hill with a little bit more speed it would have been better but he was able to save it so my hats off to this guy
Where’s the Heavy Haul, that bunches only 72k
It’s 85,000 all Day
Yup 76 maybe 78 with the head
Hit the hill with a little more steam dude
Do you know how much a bunch of weighs He’s doing all right that hell could’ve been 10 km long and he’s at the top
Have to buy auto transmission for the operator 😮
Mighty nice machine there. One can get a lot of work done in a days time.
3406 or a Big Cam 400
Sounds like a Cummins like n14 red top or newer
Awful low RPM, must be a cat motor
У меня от " дайхацу" есть двигатель K3WE. Надо собрать такой грузовичок.
Tough hauling, I construct bridges and coverts for logging roads in Oregon.
GREAT EQUIPTMENT TO HAVE.
Should have cleaned your tracks
Offroad Haul
Who cares? Loggers can’t afford to lose money. They’re just gonna put the feller buncher immediately back to work when they get to the next job site. It’s gonna get dirty again.
grab the right gear and get her done
🤘🏼🤘🏼🤘🏼