Dear My car screen turns on only once when i park under the sun. at night & in covered parking its not turning on. What is the fault.
@viabecsexpert568113 сағат бұрын
i think the sun can't affect the head unit. maybe the radio fuse is burnt out. or the connection is loose. you can check harness connection first.
@Afrikaner.3 күн бұрын
Thanks. Radio almost landed in the bin. My dog recalibrated my touch screen with his nose somehow. Now i know how he did it😅
@viabecsexpert5681Күн бұрын
You’re welcome! It sounds like your dog has some hidden tech skills!
@eddietapp27023 күн бұрын
What’s the name of the stereo
@viabecsexpert56813 күн бұрын
It is a ViaBecs Toyota Tundra car radio. Buy it on Amazon: amzn.to/3VU9v6Y
@nicholastorres89833 күн бұрын
Is the sound quality better than oem
@KingDiellore4 күн бұрын
I need mercedes benz logo please😊.
@scorhan5 күн бұрын
Wolksvagen golf 5 tsi 2008
@angel299496 күн бұрын
Funciona con la camara de reversa de fabrica?
@viabecsexpert56815 күн бұрын
Nuestra unidad principal Highlander admite control del volante de fábrica, cámara de respaldo o cámara 360, amplificador JBL, USB, información TPMS, información de puerta. Hemos actualizado el manual de instalación. Revíselo antes de realizar un pedido de la unidad principal de ViaBecs. 0.z.wiki/autoupload/20240702/KzzP/Toyota_Highlander_2014-2019_Installation_Manual.pdf -------- our highlander head unit supports factory steering wheel control, backup camera or 360 camera, JBL amplifier, USB, TPMS info, Door Info We have updated the installation manual. Please review it before placing an order for the ViaBecs head unit. 0.z.wiki/autoupload/20240702/KzzP/Toyota_Highlander_2014-2019_Installation_Manual.pdf
@wolf-sw1wr9 күн бұрын
Not working......
@viabecsexpert56815 күн бұрын
Long press the voice option, then drag it to the top, and the language will be set successfully. You can try again.
@mirasakitotalbrands70159 күн бұрын
A radio repairer checked june and said the panel is faulty , how can I fix is d panel repairable
@viabecsexpert56815 күн бұрын
if your touch screen is not working, you can try to calibrate the touch screen. kzread.info/dash/bejne/dqV317aJopa6pto.html
@user-hn3co4qe9h13 күн бұрын
Can’t get that screen up
@jelenapetrovic950814 күн бұрын
Great video, i was able to do a conversation without any issues. My only issue is switching to the microphone I installed with the unit. I would like to get a manul to what the capabilities are, are you aware of any?
@christopherjamesrussell14 күн бұрын
I did not use the microphone. I just installed it without the microphone and everything is working great. Not sure if it works with the original microphone or if it’s working with the head unit microphone hole on the unit.
@ChiahueiLeong17 күн бұрын
Hello, may i know how to solve the black screen problem? When u touch there have response jz cant see it
@ashercohen473917 күн бұрын
thanks
@josefernandez500217 күн бұрын
How do you check air pressure on this radio I want to buy it this radio for my highlander 2017 and I heard that you are able to check air pressure! Is this true?
@NEOAWARE_VERSEKER19 күн бұрын
XY AUDIO, XY AUTO & XY LINK can use the same firmware?
@NEOAWARE_VERSEKER19 күн бұрын
XY AUDIO, XY AUTO & XY LINK, use the same process and firmware?
@yamilrodriguez265419 күн бұрын
Donde puedo hacer este cambio me interesa , nombre y dirección por favor . Mil gracias
@MrSamy662620 күн бұрын
Question to use the GPS I need to connect wifi from my phone ? O the stereo ready haven't
@rocknrawls20 күн бұрын
Mine is stuck in default in canbus and I cannot navigate to Highlander due to climate control taking up screen
@louiedee27921 күн бұрын
Can't get into recovery mode
@louiedee27921 күн бұрын
Does not work
@Awesome.aashmay21 күн бұрын
Hi
@louiedee27921 күн бұрын
Five fingers dont work! Do o connect mymlaptop via usb cablw?
@louiedee27921 күн бұрын
The mouse plug in. There are no more wired mouse plug in. Do I just connect it to my laptop??via usb??
@louiedee27921 күн бұрын
Five fingers won't show anything!
@jtdowelll21 күн бұрын
I have a blank HVAC unit , no stereo , I wanted to install my own two din radio. Can this be done as there is no head unit to access the programming.
@MasterStinger523 күн бұрын
Hi, I have a android unit for mercedes b 180 (2012). The screen not switch to camera when put in reverse. The screen have a GND and CCV 12V line. I connected the CCV 12V wire with the red one from the reverse lamp. Any idea why its not working?
@viabecsexpert568123 күн бұрын
Please ensure that you have connected the reverse line of the backup camera to the reverse/back line of your head unit. This will allow the backup camera to display when you put the car in reverse. Kindly double-check the camera connection.
@christopherjamesrussell26 күн бұрын
Everything is working well. The only thing I cannot figure out is why the volume on apps like Netflix, TikTok etc is very low. I turn the volume up all the way on the viabecs, but it’s not turning up that loud? The music and maps work very loud. Any fix for this?
@viabecsexpert568126 күн бұрын
Q4: When the following situations occur, please review the settings of the Navigation Application. Case 1: Listening to my message through Apple CarPlay, I had to turn the volume up a lot. When I switched back to FM, it was so loud. Case 2: The volume is too low when Siri speaks. Case 3: The aftermarket subwoofer is working when the radio is on but not when Apple carplay is on. A: Setting APP--General--Navigation Application Settings--Google Maps or another maps app Video: How to Choose Map APP as Navigation Application kzread.info/dash/bejne/fGyn07KjYbHSYJs.html
@christopherjamesrussell26 күн бұрын
Did you install the protection glass? Did you first remove both layers of plastic on the screen?
@viabecsexpert568126 күн бұрын
We sent a 10-inch tempered film with the package. you need to remove both layers of plastic on the screen before install temmered film. ”I applied the screen protector but there are big bubbles that I can't get out. Please help! ” Using a credit card or a similar object: If the bubbles persist, you can try using a credit card or a similar flat, rigid object to push the bubbles towards the nearest edge of the screen protector. Use gentle, even pressure to avoid scratching the protector or device screen. Heat method: Sometimes, using a hairdryer on low heat can help soften the adhesive of the screen protector, making it easier to manipulate and remove bubbles. Hold the hairdryer a few inches away from the screen protector and move it in a circular motion for about 15-20 seconds. Then, press down on the bubbles as described above.
@christopherjamesrussell26 күн бұрын
@@viabecsexpert5681 I only removed one layer of plastic when putting the protective glass on. It looks great. There was a hard layer of plastic on the screen under the soft thing plastic wrap, but that hard plastic protection did not come off. Should I remove everything and reinstall the protective glass or just leave it?
@viabecsexpert568126 күн бұрын
@@christopherjamesrussell If the touch is ok, you can keep the hard plastic protection.
@christopherjamesrussell25 күн бұрын
@@viabecsexpert5681 Thank you. How can I get another screen protector to fix it? Theres dust trapped underneath the factory hard layer of plastic, and I put the screen protector on since the instructions didn’t say to remove the hard plastic layer. Is it possible to get a replacement of the protections glass?
@christopherjamesrussell26 күн бұрын
When do you install the screen protector? Did you remove both layers of plastic on the screen first?
@viabecsexpert568126 күн бұрын
We sent a 10-inch tempered film with the package. you need to remove both layers of plastic on the screen before install temmered film. ”I applied the screen protector but there are big bubbles that I can't get out. Please help! ” Using a credit card or a similar object: If the bubbles persist, you can try using a credit card or a similar flat, rigid object to push the bubbles towards the nearest edge of the screen protector. Use gentle, even pressure to avoid scratching the protector or device screen. Heat method: Sometimes, using a hairdryer on low heat can help soften the adhesive of the screen protector, making it easier to manipulate and remove bubbles. Hold the hairdryer a few inches away from the screen protector and move it in a circular motion for about 15-20 seconds. Then, press down on the bubbles as described above.
@christopherjamesrussell25 күн бұрын
@@viabecsexpert5681 How can I get another screen protector to fix it? Theres dust trapped underneath the factory hard layer of plastic, and I put the screen protector on since the instructions didn’t say to remove the hard plastic layer. Is it possible to get a replacement of the protections glass?
@viabecsexpert568125 күн бұрын
@@christopherjamesrussell Do you order ViaBecs head unit? if so, please send me the order number to check first. [email protected]
@sharkxraptor681427 күн бұрын
Thanks this video really help solve my problem
@Sakalakabaka28 күн бұрын
Hi, ac isn’t blowing cold air. Any solution for that?
@viabecsexpert568126 күн бұрын
Step 1, please check the connection of AC control harness. Step 2, Please check wether you choose the correct canbus option. note: maybe your head unit doesn't built-in CHANGYUANTONG canbus. so the canbus option is different.
@tieanlewis753428 күн бұрын
Thank you 🙏
@christopherjamesrussell29 күн бұрын
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
@viabecsexpert568126 күн бұрын
How to set up Electric rear door S1: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipPSdZluExNn49uYxxjupg0RQbeIEJywMuFLudNx
@viabecsexpert568126 күн бұрын
Here are some door lock settings. I'm not sure if this is the information you need. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipNuyn5IbDM-bcwUlHhs9PcYM2D92iiLW9HlqvRm photos.google.com/u/1/search/_tra_/photo/AF1QipN1SfGlmm9rofEYDk_WQgUTBRpRMSwqe2qgLkQL
@jelenapetrovic950814 күн бұрын
Can you provide number for the support?
@christopherjamesrussell29 күн бұрын
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
@christopherjamesrussell29 күн бұрын
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
@christopherjamesrussell29 күн бұрын
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
@viabecsexpert568126 күн бұрын
How to set up Electric rear door S1: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipPSdZluExNn49uYxxjupg0RQbeIEJywMuFLudNx
@viabecsexpert568126 күн бұрын
Here are some door lock settings. I'm not sure if this is the information you need. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipNuyn5IbDM-bcwUlHhs9PcYM2D92iiLW9HlqvRm photos.google.com/u/1/search/_tra_/photo/AF1QipN1SfGlmm9rofEYDk_WQgUTBRpRMSwqe2qgLkQL
@Codebluesituation29 күн бұрын
This worked for my head unit! Thank you ! :)
@christopherjamesrussell29 күн бұрын
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
@maszone731319 күн бұрын
Hey, just got this today. It’s a bit tricky to find but it does have all the vehicle settings and it carries them over what was previously programmed. It kept my auto headlight sensitivity and door lock settings.
@christopherjamesrussell19 күн бұрын
@@maszone7313 Thanks 🙏🏻. Yeah they pointed me to it and I was able to find it. Absolutely love the head unit it made the vehicle feel like a 2024! Super happy to be able to get new technology in this body style. I hate the new Highlander shape. Black on black SE 2019 😎
@christopherjamesrussell29 күн бұрын
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
@kokovin6808Ай бұрын
What is the use of FM1 and FM2 on the BAND? Does it mean I can preset different station for each FM BAND? 18 + 18 ?
@viabecsexpert568126 күн бұрын
FM1: band: 87.5--108 MHz FM2 band: 87.5--108 MHz AM band: 520--1720 KHz yes, you can reserve 18 stations for each FM1, FM2 or AM BAND. (18+18+18)
@kokovin680825 күн бұрын
@@viabecsexpert5681 i tried saving 18 stations to FM1 but when I switch to FM2, same 18 saved stations no changes as if both FM1 and FM2 share same 18 stations only.
@anndennis4201Ай бұрын
I purchased a used 2013 Rav 4 and it works great except for the head unit. It won’t connect to Bluetooth and the navigation, hands free phone, don’t work. The regular radio, XM, backup camera and auxiliary port all work but I really wanted to use all the features. Should I try to find one at a salvage yard or eBay? Also you didn’t test yours to make sure all the features worked such as Bluetooth and navigation. Did yours have that? Thanks in advance.
@viabecsexpert568126 күн бұрын
our head unit can support Bluetooth call, hands free phone. Video: How To Connect iPhone To Car Stereo Via Bluetooth kzread.info/dash/bejne/mWx8yNVuaZSzntI.html
@Digital.PhotographyАй бұрын
A Chrysler dealer installed a back up camera on my 2015 300C. It works sporadically, sometimes it say "unavailable ", but stops working in early spring, and stays off until Autumn. However, sometimes it will work in hot weather and other times it won’t work in winter months. First time it malfunctioned was in 100° weather and I was parked with camera lens facing into the sun. They want more $ to diagnose the problem than what they charged me to install it. What should I look at first to diagnose problem?
@Digital.PhotographyАй бұрын
A Chrysler dealer installed a back up camera on my 2015 300C. It works sporadically, sometimes it say "unavailable ", but stops working in early spring, and stays off until Autumn. However, sometimes it will work in hot weather and other times it won’t work in winter months. First time it malfunctioned was in 100° weather and I was parked with camera lens facing into the sun. They want more $ to diagnose the problem than what they charged me to install it. What should I look at first to diagnose problem?
@jamiegraf7350Ай бұрын
My control functions on the steering wheel work but the Next/Previous functions to change songs are backwards. Any thoughts?
@jamiegraf7350Ай бұрын
I even changed the steering wheel functions on the stereo itself so that Next=Previous and vice versa, but either way I set it up, the functions are reversed
@viabecsexpert568126 күн бұрын
If the up and down steering buttons are switched, please try to close or open the option of "Switch the steering wheel up and down" to test. S1, Please open the setting app -- Factory -- Switch the steering wheel up and down. S2, Please open or close it to test. S3, Then click the "Restart" button to reboot the head unit to save the setting. photo: photos.google.com/u/1/search/_tra_/photo/AF1QipMEnwkdJnDN04ih4MiUxJBRu4xDrd9JaYT8n5Rv
@christopherjamesrussell26 күн бұрын
@@viabecsexpert5681 Wouldnt this also flip the volume controls, then those will be backwards. I’m having the same issue as her.
@viabecsexpert568126 күн бұрын
@@christopherjamesrussell it can't flip volume controls. Is it only the volume control button that is flipped? Are the other square control buttons working properly? you can try to rechoose the canbus to test. S2: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. S3: Choose CanBox Brand: 03:Simple Soft --30:Toyota-- Models: 14:All New Highlander -- Config: Public Finally, press ok to save the settings. Then the head unit will update it automatically. Video: Set up the canbus option. kzread.info/dash/bejne/oYaXpNBsc5nbntY.html
@christopherjamesrussell26 күн бұрын
@@viabecsexpert5681 this worked thank you 🙏🏻
@EROS._XАй бұрын
Nos puedes compartir la actualización
@fvigz10_Ай бұрын
Hello my friend! I have a problem with the junsun radio. My CarPlay stopped working after an update. It also has the reset button on the front, but as you say, it just resets. It does not go into factory recovery mode. can u help me please? im really tired with this issue.
@nickicenroad484Ай бұрын
I have an eonon M3BLA12 and stupidly changed the resolution to 1280. Now I cannot hit the keys right on the touch screen and cannot get to the confirm button to change it back. Does a hard reset erase resolution settings? Im struggling here
@viabecsexpert5681Ай бұрын
video: How To Fix Android Car Radio touch screen not working kzread.info/dash/bejne/dmGA1NOscrfJf5c.html you can Calibrate the touch screen and then try to change it back.
@christopherjamesrussellАй бұрын
It looks great, but how do you control many features in the vehicle that are controlled through the OEM head unit? Theres a ton of options that you really can’t go without that are accessible through the OEM head unit. Does this after market provide access to those options?
@viabecsexpert5681Ай бұрын
Our harness can support factory steering wheel control, JBL amplifier, original backup camera, door display info, TPMS info (can't change TPMS unit). What other original features would you like to ask about?
@christopherjamesrussellАй бұрын
@@viabecsexpert5681 There’s a multitude of settings inside the OEM head unit. As an example you can change lock settings, disable/enable day time running lights, and many other things. The brain of the vehicle is the OEM heading for settings. My question is, if I swap it out for your head unit, how would I ever access those features again?
@christopherjamesrussellАй бұрын
Any response to this? Do we permanently lose access to door lock settings, day time running light disable settings, and the numerous other “vehicle programming settings” within the OEM stereo?
@bobbychong23Ай бұрын
Any solution if turn on car the head unit is on but black screen.. When I switched the gear to Reverse the screen is turn on.. Have any solution for this?
@viabecsexpert5681Ай бұрын
Solution 1: Please DISCONNECT YOUR BATTERY. then connect the negative cable and positive cable after 10 minutes. and test whether the car radio could be turned on. For safety purposes, always disconnect the negative cable first. Solution2: 1) Please find a pin to press the RST button (long press) until you see the light button flashes three times. 2) Then press the RST button 3-4 times in time unit the panel LED light on all the time 3) you will enter the radio recovery interface. If you can enter the recovery interface, please try to test whether the screen can work well after resetting factory data. here is the video on how to enter the radio recovery interface. kzread.info/dash/bejne/mJifxZaSctm5YJc.html Solution3: If solution1 and solution2 can't solve it, please unplug and unplug the PX6 chip and screen cable. How to remove the PX6 chip: kzread.info/dash/bejne/ipeepsWlg6jAZ9Y.html kzread.info/dash/bejne/oHaYo7OPervamLg.html
Пікірлер
Dear My car screen turns on only once when i park under the sun. at night & in covered parking its not turning on. What is the fault.
i think the sun can't affect the head unit. maybe the radio fuse is burnt out. or the connection is loose. you can check harness connection first.
Thanks. Radio almost landed in the bin. My dog recalibrated my touch screen with his nose somehow. Now i know how he did it😅
You’re welcome! It sounds like your dog has some hidden tech skills!
What’s the name of the stereo
It is a ViaBecs Toyota Tundra car radio. Buy it on Amazon: amzn.to/3VU9v6Y
Is the sound quality better than oem
I need mercedes benz logo please😊.
Wolksvagen golf 5 tsi 2008
Funciona con la camara de reversa de fabrica?
Nuestra unidad principal Highlander admite control del volante de fábrica, cámara de respaldo o cámara 360, amplificador JBL, USB, información TPMS, información de puerta. Hemos actualizado el manual de instalación. Revíselo antes de realizar un pedido de la unidad principal de ViaBecs. 0.z.wiki/autoupload/20240702/KzzP/Toyota_Highlander_2014-2019_Installation_Manual.pdf -------- our highlander head unit supports factory steering wheel control, backup camera or 360 camera, JBL amplifier, USB, TPMS info, Door Info We have updated the installation manual. Please review it before placing an order for the ViaBecs head unit. 0.z.wiki/autoupload/20240702/KzzP/Toyota_Highlander_2014-2019_Installation_Manual.pdf
Not working......
Long press the voice option, then drag it to the top, and the language will be set successfully. You can try again.
A radio repairer checked june and said the panel is faulty , how can I fix is d panel repairable
if your touch screen is not working, you can try to calibrate the touch screen. kzread.info/dash/bejne/dqV317aJopa6pto.html
Can’t get that screen up
Great video, i was able to do a conversation without any issues. My only issue is switching to the microphone I installed with the unit. I would like to get a manul to what the capabilities are, are you aware of any?
I did not use the microphone. I just installed it without the microphone and everything is working great. Not sure if it works with the original microphone or if it’s working with the head unit microphone hole on the unit.
Hello, may i know how to solve the black screen problem? When u touch there have response jz cant see it
thanks
How do you check air pressure on this radio I want to buy it this radio for my highlander 2017 and I heard that you are able to check air pressure! Is this true?
XY AUDIO, XY AUTO & XY LINK can use the same firmware?
XY AUDIO, XY AUTO & XY LINK, use the same process and firmware?
Donde puedo hacer este cambio me interesa , nombre y dirección por favor . Mil gracias
Question to use the GPS I need to connect wifi from my phone ? O the stereo ready haven't
Mine is stuck in default in canbus and I cannot navigate to Highlander due to climate control taking up screen
Can't get into recovery mode
Does not work
Hi
Five fingers dont work! Do o connect mymlaptop via usb cablw?
The mouse plug in. There are no more wired mouse plug in. Do I just connect it to my laptop??via usb??
Five fingers won't show anything!
I have a blank HVAC unit , no stereo , I wanted to install my own two din radio. Can this be done as there is no head unit to access the programming.
Hi, I have a android unit for mercedes b 180 (2012). The screen not switch to camera when put in reverse. The screen have a GND and CCV 12V line. I connected the CCV 12V wire with the red one from the reverse lamp. Any idea why its not working?
Please ensure that you have connected the reverse line of the backup camera to the reverse/back line of your head unit. This will allow the backup camera to display when you put the car in reverse. Kindly double-check the camera connection.
Everything is working well. The only thing I cannot figure out is why the volume on apps like Netflix, TikTok etc is very low. I turn the volume up all the way on the viabecs, but it’s not turning up that loud? The music and maps work very loud. Any fix for this?
Q4: When the following situations occur, please review the settings of the Navigation Application. Case 1: Listening to my message through Apple CarPlay, I had to turn the volume up a lot. When I switched back to FM, it was so loud. Case 2: The volume is too low when Siri speaks. Case 3: The aftermarket subwoofer is working when the radio is on but not when Apple carplay is on. A: Setting APP--General--Navigation Application Settings--Google Maps or another maps app Video: How to Choose Map APP as Navigation Application kzread.info/dash/bejne/fGyn07KjYbHSYJs.html
Did you install the protection glass? Did you first remove both layers of plastic on the screen?
We sent a 10-inch tempered film with the package. you need to remove both layers of plastic on the screen before install temmered film. ”I applied the screen protector but there are big bubbles that I can't get out. Please help! ” Using a credit card or a similar object: If the bubbles persist, you can try using a credit card or a similar flat, rigid object to push the bubbles towards the nearest edge of the screen protector. Use gentle, even pressure to avoid scratching the protector or device screen. Heat method: Sometimes, using a hairdryer on low heat can help soften the adhesive of the screen protector, making it easier to manipulate and remove bubbles. Hold the hairdryer a few inches away from the screen protector and move it in a circular motion for about 15-20 seconds. Then, press down on the bubbles as described above.
@@viabecsexpert5681 I only removed one layer of plastic when putting the protective glass on. It looks great. There was a hard layer of plastic on the screen under the soft thing plastic wrap, but that hard plastic protection did not come off. Should I remove everything and reinstall the protective glass or just leave it?
@@christopherjamesrussell If the touch is ok, you can keep the hard plastic protection.
@@viabecsexpert5681 Thank you. How can I get another screen protector to fix it? Theres dust trapped underneath the factory hard layer of plastic, and I put the screen protector on since the instructions didn’t say to remove the hard plastic layer. Is it possible to get a replacement of the protections glass?
When do you install the screen protector? Did you remove both layers of plastic on the screen first?
We sent a 10-inch tempered film with the package. you need to remove both layers of plastic on the screen before install temmered film. ”I applied the screen protector but there are big bubbles that I can't get out. Please help! ” Using a credit card or a similar object: If the bubbles persist, you can try using a credit card or a similar flat, rigid object to push the bubbles towards the nearest edge of the screen protector. Use gentle, even pressure to avoid scratching the protector or device screen. Heat method: Sometimes, using a hairdryer on low heat can help soften the adhesive of the screen protector, making it easier to manipulate and remove bubbles. Hold the hairdryer a few inches away from the screen protector and move it in a circular motion for about 15-20 seconds. Then, press down on the bubbles as described above.
@@viabecsexpert5681 How can I get another screen protector to fix it? Theres dust trapped underneath the factory hard layer of plastic, and I put the screen protector on since the instructions didn’t say to remove the hard plastic layer. Is it possible to get a replacement of the protections glass?
@@christopherjamesrussell Do you order ViaBecs head unit? if so, please send me the order number to check first. [email protected]
Thanks this video really help solve my problem
Hi, ac isn’t blowing cold air. Any solution for that?
Step 1, please check the connection of AC control harness. Step 2, Please check wether you choose the correct canbus option. note: maybe your head unit doesn't built-in CHANGYUANTONG canbus. so the canbus option is different.
Thank you 🙏
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
How to set up Electric rear door S1: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipPSdZluExNn49uYxxjupg0RQbeIEJywMuFLudNx
Here are some door lock settings. I'm not sure if this is the information you need. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipNuyn5IbDM-bcwUlHhs9PcYM2D92iiLW9HlqvRm photos.google.com/u/1/search/_tra_/photo/AF1QipN1SfGlmm9rofEYDk_WQgUTBRpRMSwqe2qgLkQL
Can you provide number for the support?
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
How to set up Electric rear door S1: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipPSdZluExNn49uYxxjupg0RQbeIEJywMuFLudNx
Here are some door lock settings. I'm not sure if this is the information you need. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipNuyn5IbDM-bcwUlHhs9PcYM2D92iiLW9HlqvRm photos.google.com/u/1/search/_tra_/photo/AF1QipN1SfGlmm9rofEYDk_WQgUTBRpRMSwqe2qgLkQL
This worked for my head unit! Thank you ! :)
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
Hey, just got this today. It’s a bit tricky to find but it does have all the vehicle settings and it carries them over what was previously programmed. It kept my auto headlight sensitivity and door lock settings.
@@maszone7313 Thanks 🙏🏻. Yeah they pointed me to it and I was able to find it. Absolutely love the head unit it made the vehicle feel like a 2024! Super happy to be able to get new technology in this body style. I hate the new Highlander shape. Black on black SE 2019 😎
I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.
What is the use of FM1 and FM2 on the BAND? Does it mean I can preset different station for each FM BAND? 18 + 18 ?
FM1: band: 87.5--108 MHz FM2 band: 87.5--108 MHz AM band: 520--1720 KHz yes, you can reserve 18 stations for each FM1, FM2 or AM BAND. (18+18+18)
@@viabecsexpert5681 i tried saving 18 stations to FM1 but when I switch to FM2, same 18 saved stations no changes as if both FM1 and FM2 share same 18 stations only.
I purchased a used 2013 Rav 4 and it works great except for the head unit. It won’t connect to Bluetooth and the navigation, hands free phone, don’t work. The regular radio, XM, backup camera and auxiliary port all work but I really wanted to use all the features. Should I try to find one at a salvage yard or eBay? Also you didn’t test yours to make sure all the features worked such as Bluetooth and navigation. Did yours have that? Thanks in advance.
our head unit can support Bluetooth call, hands free phone. Video: How To Connect iPhone To Car Stereo Via Bluetooth kzread.info/dash/bejne/mWx8yNVuaZSzntI.html
A Chrysler dealer installed a back up camera on my 2015 300C. It works sporadically, sometimes it say "unavailable ", but stops working in early spring, and stays off until Autumn. However, sometimes it will work in hot weather and other times it won’t work in winter months. First time it malfunctioned was in 100° weather and I was parked with camera lens facing into the sun. They want more $ to diagnose the problem than what they charged me to install it. What should I look at first to diagnose problem?
A Chrysler dealer installed a back up camera on my 2015 300C. It works sporadically, sometimes it say "unavailable ", but stops working in early spring, and stays off until Autumn. However, sometimes it will work in hot weather and other times it won’t work in winter months. First time it malfunctioned was in 100° weather and I was parked with camera lens facing into the sun. They want more $ to diagnose the problem than what they charged me to install it. What should I look at first to diagnose problem?
My control functions on the steering wheel work but the Next/Previous functions to change songs are backwards. Any thoughts?
I even changed the steering wheel functions on the stereo itself so that Next=Previous and vice versa, but either way I set it up, the functions are reversed
If the up and down steering buttons are switched, please try to close or open the option of "Switch the steering wheel up and down" to test. S1, Please open the setting app -- Factory -- Switch the steering wheel up and down. S2, Please open or close it to test. S3, Then click the "Restart" button to reboot the head unit to save the setting. photo: photos.google.com/u/1/search/_tra_/photo/AF1QipMEnwkdJnDN04ih4MiUxJBRu4xDrd9JaYT8n5Rv
@@viabecsexpert5681 Wouldnt this also flip the volume controls, then those will be backwards. I’m having the same issue as her.
@@christopherjamesrussell it can't flip volume controls. Is it only the volume control button that is flipped? Are the other square control buttons working properly? you can try to rechoose the canbus to test. S2: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. S3: Choose CanBox Brand: 03:Simple Soft --30:Toyota-- Models: 14:All New Highlander -- Config: Public Finally, press ok to save the settings. Then the head unit will update it automatically. Video: Set up the canbus option. kzread.info/dash/bejne/oYaXpNBsc5nbntY.html
@@viabecsexpert5681 this worked thank you 🙏🏻
Nos puedes compartir la actualización
Hello my friend! I have a problem with the junsun radio. My CarPlay stopped working after an update. It also has the reset button on the front, but as you say, it just resets. It does not go into factory recovery mode. can u help me please? im really tired with this issue.
I have an eonon M3BLA12 and stupidly changed the resolution to 1280. Now I cannot hit the keys right on the touch screen and cannot get to the confirm button to change it back. Does a hard reset erase resolution settings? Im struggling here
video: How To Fix Android Car Radio touch screen not working kzread.info/dash/bejne/dmGA1NOscrfJf5c.html you can Calibrate the touch screen and then try to change it back.
It looks great, but how do you control many features in the vehicle that are controlled through the OEM head unit? Theres a ton of options that you really can’t go without that are accessible through the OEM head unit. Does this after market provide access to those options?
Our harness can support factory steering wheel control, JBL amplifier, original backup camera, door display info, TPMS info (can't change TPMS unit). What other original features would you like to ask about?
@@viabecsexpert5681 There’s a multitude of settings inside the OEM head unit. As an example you can change lock settings, disable/enable day time running lights, and many other things. The brain of the vehicle is the OEM heading for settings. My question is, if I swap it out for your head unit, how would I ever access those features again?
Any response to this? Do we permanently lose access to door lock settings, day time running light disable settings, and the numerous other “vehicle programming settings” within the OEM stereo?
Any solution if turn on car the head unit is on but black screen.. When I switched the gear to Reverse the screen is turn on.. Have any solution for this?
Solution 1: Please DISCONNECT YOUR BATTERY. then connect the negative cable and positive cable after 10 minutes. and test whether the car radio could be turned on. For safety purposes, always disconnect the negative cable first. Solution2: 1) Please find a pin to press the RST button (long press) until you see the light button flashes three times. 2) Then press the RST button 3-4 times in time unit the panel LED light on all the time 3) you will enter the radio recovery interface. If you can enter the recovery interface, please try to test whether the screen can work well after resetting factory data. here is the video on how to enter the radio recovery interface. kzread.info/dash/bejne/mJifxZaSctm5YJc.html Solution3: If solution1 and solution2 can't solve it, please unplug and unplug the PX6 chip and screen cable. How to remove the PX6 chip: kzread.info/dash/bejne/ipeepsWlg6jAZ9Y.html kzread.info/dash/bejne/oHaYo7OPervamLg.html