Пікірлер

• 
  @SanuallahChandioКүн бұрын

  Wow nice 👍 good 👌 sir 🇵🇰

• 
  @SanuallahChandioКүн бұрын

  Wow nice 👍 good 👌 sir 🇵🇰

• 
  @CuttinInIdahoКүн бұрын

  Plus Theft! My dude!

• 
  @KindleKing152 күн бұрын

  I'm going 2.7 XLT, Iconic Silver. I'm planning on speccing mine out with just the rear locker, towing package, bedliner, and steps. No daul zone, but I've got a family car for when I'm driving w Wifey.

• 
  @YourFavoriteLibertarian2 күн бұрын

  I dig it! That silver will look cool with the included sport appearance package wheels and trim, too.

• 
  @1alexjorton2 күн бұрын

  @@YourFavoriteLibertarianyeah I love the contrast. Awesome you’re getting the homie hook up price! I’ll stay posted on the channel to see your experience w the truck 💪

• 
  @velocitydreamer4 күн бұрын

  Please someone tell me, what is the manufacturer of the Handguard the Peak Iron Sights are attached to? (wicked irons btw, definitely going to snag a pair)

• 
  @abc47814 күн бұрын

  Is an Armored Core included with the Mech belt?

• 
  @YourFavoriteLibertarian4 күн бұрын

  Hahaha. No. I had to look up what that was, you jokester, lol.

• 
  @user-ef9qh8dv2d5 күн бұрын

  I would like to have a cheek weld or kick-eeze plate and pad on BOTH sides of the stock, one that wraps over to provide the same cheek weld to left and right side.

• 
  @YourFavoriteLibertarian5 күн бұрын

  That would be nice and doable.

• 
  @FanofLocke6276 күн бұрын

  What light system do you recommend?

• 
  @YourFavoriteLibertarian6 күн бұрын

  I run the streamlight Polytac X on the LTT handguard so I can keep the handgaurd flex down with a lighter light. For a metal handguard, I've been really liking the HRT lights. They fit really well on the new midwest industries handguard, too. (Foreshadowing)

• 
  @joshc24127 күн бұрын

  How did you get the green Magpul stock for the 1301?

• 
  @YourFavoriteLibertarian7 күн бұрын

  I think I covered that in my DIY LTT video, and I'll be going over it again in my Midwest Industries handguard video as I've matched it to the Chisel Machining folding stock. I'll answer your question anyway, though, lol. For the magpul furniture, it was cerakoted Magpul Foliage Green by Odins Workshop. For the metal furniture (or if you want the same color for cheaper), I used a coat of Rustoleum Flat Khaki, then 2 coats of Rustoleum Deep Forest Green.

• 
  @8BloodyKnuckles8 күн бұрын

  Was all about the video until you mentioned praying for others. After that comment and caption… I subscribed to your channel. I can’t go into detail but my household could definitely use prayers. May God bless you and all who read this.

• 
  @YourFavoriteLibertarian8 күн бұрын

  May His favor go before you. May His presence be beside you. May His mercy be all around you. In your family and your children, and their children and their children. Thanks for joining the Freedom Fam! All my brothers in Christ, you know what to do.

• 
  @sthollywood958210 күн бұрын

  Looks like the HPL face cap won't be for sale separately, not sure why they are doing that, I'll probably just replace my older TLR RM2 with a surefire, at least I can get separate heads for that. Really disappointed in Streamlight

• 
  @YourFavoriteLibertarian10 күн бұрын

  Not sure why they said they would. For only increasing candela, it seems like they would be able to sell the heads separately, but they did just come out with the TLR-7 HLX that increases the lumens as well. With that new light, they had to change the circuitry in the body as well to get those numbers with their rechargable battery. So, maybe they are trying to keep it simple across the board by not having some heads that are interchangeable and some that are not floating around.

• 
  @YourFavoriteLibertarian10 күн бұрын

  I'll be taking a look at their new TLR-7 HL X soon, which may render the TLR-1 HL and the TLR RM2 obsolete (unless you really want the pressure pad)....Stay tuned.

• 
  @jaydmcfly13 күн бұрын

  I need this stock made for the benelli M4

• 
  @fy32813 күн бұрын

  Why does my QD sling not lock into the front socket? Does beretta have there own QD swivel?

• 
  @YourFavoriteLibertarian13 күн бұрын

  I think they just have a really bad design for their barrel/magazine clamp mlok/sling qd combo. For one, it's plastic, so there's a ton of flex. It also can't stop itself from sliding front wards or backwards under recoil. And you're not the first person to say their sling qd won't click in, or that it just fell out. They should be ashamed. All that money, all of the aftermarket fixing their furniture shortcomings with accessories, and they just came out with the mod 2 with the same useless sling swivel.

• 
  @fy32813 күн бұрын

  @@YourFavoriteLibertarian any suggestions on a new barrel clamp that will fix my issue?

• 
  @YourFavoriteLibertarian13 күн бұрын

  @@fy328 I would check out options from GG&G and Aridus

• 
  @Scorpion-lj9lg13 күн бұрын

  Comment for the algorithm because I just found your content and I'm loving it so far! I just got to the prayer requests segment, man I love your channel so much more haha It's so nice to see unapologetically Christian content creators

• 
  @YourFavoriteLibertarian13 күн бұрын

  Thanks, Brother!

• 
  @1046915 күн бұрын

  I know what I’m going to be doing the next time I have my 1301 in my hands ..

• 
  @dinkone794315 күн бұрын

  Hahaha I never had that many rounds on me going in too combat Good video

• 
  @YourFavoriteLibertarian15 күн бұрын

  Thanks Man!

• 
  @BrandensOutdoorChannel15 күн бұрын

  My esstac cards were also peeling away on their own. I kept bending them backwards.

• 
  @mauriciorosashernandez63323 күн бұрын

  Did constant bending help the issue?

• 
  @Timcanniff31116 күн бұрын

  I got savior equipment shotgun cards , plus I have esstac cards as well the savior has a much harder backing and I prefer them over the esstac, but I might buy some of those grim tactical ones

• 
  @-kepha882816 күн бұрын

  I wonder if I order this light today, if I will get a similar junk product that has to be sent back. Seems a lot of people of reddit claim the issue has never been fixed and a lot of people get these garbage light. IMO, surefire forever damaged their reputation. Going to reviews on this product from multiple dealer websites, the reviews are horrible.

• 
  @YourFavoriteLibertarian16 күн бұрын

  I, for one, haven't bought anyone more since my experience.

• 
  @Timcanniff31116 күн бұрын

  What chest rig do you use that holds those shells?

• 
  @YourFavoriteLibertarian16 күн бұрын

  Anything with velcro would work since the shells are just in shotgun cards, but for the video, I was running my Defense Mechanisms MEPC. If you want to save money on it, YOURFAV saves you 10%.

• 
  @Timcanniff31116 күн бұрын

  @@YourFavoriteLibertarian thanks bud

• 
  @thecarbonfiberkid16 күн бұрын

  So with the GHT 7rd cards being smaller a guess you could move up to the 8rd and it would be the same length as esstac’s 7rd.

• 
  @YourFavoriteLibertarian16 күн бұрын

  For sure!

• 
  @jerrydelatorre597717 күн бұрын

  Great vid… just got my 1301 mod 2… seems the front QD attachment is loose… I tried the loosing the 6mm Allen screws… but my sling comes loose.

• 
  @YourFavoriteLibertarian17 күн бұрын

  Thanks! I have experienced that with mine, but I have heard that complaint before in the comments. I'd recommend reaching out to Beretta for a new one.

• 
  @MOBROOKS19 күн бұрын

  Great instructions. Thank you.

• 
  @YourFavoriteLibertarian18 күн бұрын

  You are welcome!

• 
  @officialmallcrawler20 күн бұрын

  Great video. The only question that i have is have you noticed any rattling coming from the box?

• 
  @YourFavoriteLibertarian20 күн бұрын

  Thanks! Only if you leave the kick stand attached. I took it off so it wouldn't.

• 
  @officialmallcrawler19 күн бұрын

  @@YourFavoriteLibertarian Nice that's good to know I'll keep that in mind when i install mine.

• 
  @samduffy762820 күн бұрын

  Love your videos man, praying for your success

• 
  @YourFavoriteLibertarian20 күн бұрын

  Thanks, dude. That means a lot.

• 
  @1046921 күн бұрын

  I just my 1301 with the pistol grip. I think the stock is fine but I do like that front end that looks better. But I only had mine for a month only shot 15 rounds. I work a lot and little time to play with my news toys. But every time I have a chance I’ll take her out..oh and yea I need that saddle too. Thanks for the class.

• 
  @YourFavoriteLibertarian21 күн бұрын

  Welcome to the 1301 club!

• 
  @1046921 күн бұрын

  And what a nice club it is.. pinky up..

• 
  @YourFavoriteLibertarian21 күн бұрын

  @@10469 🤣

• 
  @tecumseh6523 күн бұрын

  great vid! what type of flash light do you run on the 1301?

• 
  @YourFavoriteLibertarian22 күн бұрын

  Thanks! Right now, it's the Streamlight Polytac X.

• 
  @ronald543923 күн бұрын

  Comes with a sticker I'm sold 😊

• 
  @YourFavoriteLibertarian23 күн бұрын

  🤣

• 
  @g.cohiba992823 күн бұрын

  So glad U are doing this , I’m trying to get one and done belt for my classes. Great show again, I’ll be browsing. So far agilite has been on my radar . Thanks again!

• 
  @YourFavoriteLibertarian23 күн бұрын

  Thanks for watching! I hope it helped. If you want to save money on their stuff, code: YOURFAV will help you and the channel out.

• 
  @g.cohiba992822 күн бұрын

  Thank U my friend ! The code will help

• 
  @cm-pu6tx23 күн бұрын

  noice

• 
  @YourFavoriteLibertarian23 күн бұрын

  Thanks, Man!

• 
  @YourFavoriteLibertarian24 күн бұрын

  DISCOUNT CODES and LINKS. yourfavoritelibertarian.com/ Need prayer? Leave your prayer requests in the comment section below.

• 
  @Kenonion4124 күн бұрын

  Nice vid! My only concern would be if the shell rims catch on each other when pulling one out, given how close the shells are to each other compared to the esstacs. Have you ran into this problem while at the range? Thanks

• 
  @YourFavoriteLibertarian24 күн бұрын

  Thanks! No issues with them being close to each other yet, lol

• 
  @hellstrike536624 күн бұрын

  I've run a left-handed safety on my 870 for a decade. Is there an option or after-market part to reverse the safety on the Beretta?

• 
  @YourFavoriteLibertarian24 күн бұрын

  Here's what I found in a forum: Here's how to switch the safety button from one side to the other 1. Remove trigger plate (directions in manual). 2. On the right side of the trigger plate towards the front there's a small set screw. This screw closes off a hole in the front of the trigger plate below the lifter. Loosen the screw while covering the hole it closes off. 3. Catch the tiny spring that emerges from the hole. 4. Push safety all the way out, flip around and put back in (tilt trigger plate forward if needed, but be careful not to lose the detent that is also down the hole the spring came out of) 5. Replace spring (& detent if it came out) back down hole 6. Push spring back down hole past set screw with a tiny thin tool like a flat-bladed screwdriver, screw set-screw back in enough to retain spring, remove tool & screw in the rest of the way. 7. Replace trigger plate and test

• 
  @YourFavoriteLibertarian24 күн бұрын

  Hey I found a video too! kzread.info/dash/bejne/Y6JrvNmkka3KitI.html

• 
  @hellstrike536624 күн бұрын

  @@YourFavoriteLibertarian tyvm for the quick reply.

• 
  @kalebfinlay25 күн бұрын

  Looking forward to hearing your thoughts on the belt

• 
  @YourFavoriteLibertarian25 күн бұрын

  Well, I hope you like it. Some of your criteria made it on the list, so you have to like it now, lol.

• 
  @YourFavoriteLibertarian23 күн бұрын

  Wait no longer, my friend!

• 
  @kalebfinlay23 күн бұрын

  @@YourFavoriteLibertarian Good review, however, I have to say this is the first time I have seen a review of a battle belt while someone was wearing flip-flops LOL

• 
  @AngrySargeG0122 күн бұрын

  I’m not wearing flip flops Kaleb you can’t make me.

• 
  @YourFavoriteLibertarian22 күн бұрын

  @@AngrySargeG01 🤣

• 
  @cqc223825 күн бұрын

  Thank you! Honestly this should just come this way.

• 
  @YourFavoriteLibertarian25 күн бұрын

  I know, right?!

• 
  @matts.263726 күн бұрын

  Go ahead. Good luck with exercising and keep your motivation up

• 
  @YourFavoriteLibertarian26 күн бұрын

  Thank you! You too!

• 
  @miroslavm255327 күн бұрын

  In January 2024 Beretta released their new 1301 Tactical shotgun Mod 2 but you are talking here in this video about imaginary Mod 3 (or Gen 3) full year before Mod 2. 😂 Besides your “teaching” is very misleading and dangerous because somebody might get hurt if followed your instructions.

• 
  @YourFavoriteLibertarian26 күн бұрын

  Oh boy. This is the gen 3 of the Beretta 1301 tactical. It's the first version that was not assembled prior to being imported to the USA. That is why Americans, such as myself, can buy them with a full length tubular magazine. This, with the mod 2 coming out, is now the "Mod 1" Gen 3. The confusion on the versions seems to come from other countries' viewers of this video as they do not have the same ridiculous import laws as the United States, and therefore, have entirely different naming conventions. In the United States, Gen 1 had the "fatal flaw", Gen 2 corrected it, and Gen 3 is the version we have that is imported in parts then assembled in the U.S. to bypass having to have a shortened magazine, along with the other differences I list in my videos.

• 
  @miroslavm255326 күн бұрын

  @@YourFavoriteLibertarian kzread.info/dash/bejne/pqCYybWfj8XIYqg.htmlsi=nO3dkbxzgpQ1zyy2

• 
  @miroslavm255326 күн бұрын

  @@YourFavoriteLibertarian Ignorant and arrogant. kzread.info/dash/bejne/hIhsr9SQoa2xnso.htmlsi=LudWrc15YcboaNM7

• 
  @anthonypanepinto968527 күн бұрын

  The 18in wheels would give u just a little more clearance for off road. no?

• 
  @YourFavoriteLibertarian27 күн бұрын

  You typically want smaller wheels so you can have more sidewall on your tire for grabbing those rocks while you climb.

• 
  @YourFavoriteLibertarian27 күн бұрын

  Link to support the channel and get those plates! www.repfitness.com/#62ab30af43e10