Many thanks for this excellent video. Just done the driver’s side on an Evoque with an external keyed lock. Much easier with the external handle removed. I left all the actuator cables (3) attached. Got both motors on EBay for £15. ‘Almost’ looking forward to the next lock failing just for the satisfaction of mending it!!
@henrysdiychannelreviews9950Ай бұрын
how did you open the door
@phillipolivas81822 ай бұрын
What! Are you Saying!
@billybob97172 ай бұрын
speak up
@iaintaylor99722 ай бұрын
Thanks for the encouragement 🤣
@garykerslake59493 ай бұрын
Hi Iain. Great video, started my driver side manifold relacement this evening, and did you have to remove the solid fuel rail that supplies the injector pipes. If so what socket did you use please? Thanks Gary
@user-dt2nk3vh8u3 ай бұрын
Just picked up a 1.6d drive .. first car with heated seats.. ❤❤ drives great.
@user-nn5to3jx6d4 ай бұрын
Great video! If the actuator has failed in locked position, is it possible to remove door actuator without opening the door? My Rear right door is closed and will not open no matter what i try. I’ve removed interior panel and window regulator. Pulled on everything my fingers can touch and it won’t open. Is my only option to actually handsaw the latch off? Thank you
@richardadcock6398Ай бұрын
How did you fix yours when it was in the locked position?
@user-nn5to3jx6dАй бұрын
@@richardadcock6398 I started trying to brake or snap the actuator using a screwdriver thru the little bit of access I had by removing door interior panel Eventually I heard something click/break and at that moment the door released. Once it was open I had the actuator removed in a short amount of time
@bevphillips36805 ай бұрын
Very helpful cheers
@tomthompson74005 ай бұрын
pig of a job ,,, well done. tip ,,, jam a rag down the bulkhead where the battery tray sits , otherwise ratchets etc have a way of ending up in the gear box belly pan ,,, dont ask me how I know this.
@jasonbray16225 ай бұрын
Thanks for this video! All numbers 1-4 are now back working on my Ford Fiesta! Great video 👍🏻
@tessjake11065 ай бұрын
The Ebay link doesn't work & I need 2 as well
@iaintaylor99725 ай бұрын
Thanks for the heads up, link updated, should be working now 👍
Thanks for the video. Followed it all the way and I can now hear the glorious sound of 1, 2 and 3. 😂 Much appreciated, especially for someone who has no clue about cars. 🤩
@iandoddridge3526 ай бұрын
Hi, did you need to drill out the in inlet for the breather pipe. I've been told you do and been told you don't
@iaintaylor99726 ай бұрын
Hi Ian, Never heard of that, I didn't....
@user-mx2vh8zo8g7 ай бұрын
Same problem this morning part now ordered after watching your helpful video
@jarredallen20167 ай бұрын
I replaced mine when I replaced the brakes and it didn't go off. The front pads ate still good. How do I get the warning off?
@me61ic7 ай бұрын
Do you still sell these motors? I have the one in my car working whenever it feels like it…
@paulprince58488 ай бұрын
Ordered a motor from you and completed the job today on the back door passenger side. The most difficult part I found was getting the actuator, and the door handle out. But now it's all sorted, now I need to do the same on the driver's door!
@iaintaylor99728 ай бұрын
Yeh it can be a little tight, well done 👍
@malwill84658 ай бұрын
How do you bleed the fuel after
@iaintaylor99728 ай бұрын
Just crank the engine, don't crank for more than 10 seconds at a time, you need to let the starter to cool down otherwise it'll overheat. So 10 seconds crank 1 minute cool down, repeat.
@paullacey29998 ай бұрын
Cheers bud,nipped out and got one for mine,all good👍👍👍
@kolsouzoglou8 ай бұрын
I had the same problem. Thank you my friend. I fix it!
@paulprince58489 ай бұрын
Are you still selling these as the link doesn't work?
Alright Ian! Great we video pal! Going to be doing both L & R inlets this wee week! Kids of school etc! I’m thinking of sending me wee injectors off to ultrasonic injector cleaning! I canni say there is nothing wrong with the injectors! But thinking it’s worth it pal!
@user-yf2kc7me8v9 ай бұрын
Hello, I have an oil leak from this place, the valve cover. Should I change the cover on the supercharged engine?
@andreweedy49309 ай бұрын
What is this part called again i have the same problem many thanks
@viziionfn14287 ай бұрын
Did u find what its called i need one too
@maustin22786 ай бұрын
Resister
@lovepreet901510 ай бұрын
I got same problem but some garages asking for nearly £1000 to change it.
@Si1983h10 ай бұрын
I always find it funny when people say that a C30 is a Focus underneath as though it’s a bad thing… that era of focus was a great car… possibly a little bland outside of the ST/RS variants, but they’re a dependable and fantastic handling car… and the C30 adds a layer of comfort and luxury over that. Mine is a D5 (Polestar optimised) R design with the same plush leather as the one you’re driving there… it’s done 165k but it’s been properly cared for with bushes and suspension components replaced when needed, and the exterior and interior look like new still. Mine is pre-facelift, but has the Xenon headlamps and I love the way it looks, the R design kit looks superb on them in my opinion. Mine is also keyless which means you don’t have to have the keys hanging out of the dashboard (unlike my C70)… it’s a nice option if you can find it, I hate having a bunch of keys hanging from the front of the dash.
@toshinrock116510 ай бұрын
This video helped me alot.
@Northernerdownsouth11 ай бұрын
Random question, what does the brown wiring loom on top of the engine supply?
@cadilacdesert11 ай бұрын
I just bought a t 5
@mysilentnoise451011 ай бұрын
We appreciate you taking the time to make this video, but if you don't show how you got the door to open so you could remove the inner part, this information is worthless!
@iaintaylor997211 ай бұрын
That's for your critical comment, Why don't you make your own video?
@mysilentnoise451010 ай бұрын
@@iaintaylor9972 I just may; now that I figured out how to do it!
@iaintaylor997210 ай бұрын
@@mysilentnoise4510 look forward to watching it.
@JimHydes-zo1vs Жыл бұрын
I've recently bought a L319 disco 4 65 reg which has a sdv6 engine. Are these cracked manifolds common across all models and years? Mine has 66k miles currently. I thought your video very informative but hope I don't get the problem!
@cristijucu654 Жыл бұрын
Hi there , how did you manage to open the rear door if the buttons didn't open it ? I have the same problem but how can I open it so I can take off the door panel to get to the acuator or other parts I might need to change ?
@4002intu Жыл бұрын
Thank you so much. Great video
@Animus82100 Жыл бұрын
In my fiesta 2009 no light on heather. Just led diode on ac. What could be problem?
@user-lv2zt4bd9t Жыл бұрын
My range rover sport is locked inside and unlocked but if I locked with remote is not working but if I unlocked it is working
RHD, so he is probably not from the Netherlands but most likely is a true Scotsman. 😊
@michaelcramer3120 Жыл бұрын
Excellent. Now can do mine.
@Twindadentrepreneur Жыл бұрын
Thanks for the video mate, just took the driver one out and now struggling to get the new one in. Is there any tips of tricks or just a bit of pressure and patients? Thanks
@patagualianmostly7437 Жыл бұрын
Lose the hat.
@katkasiek-zr7mi Жыл бұрын
thanks much this was really helpful and simple to follow (access aside, hats off for filming and getting in there!); a reasonably quick fixand even for a complete newbie. Note 2016 fiesta needed torx 10 not 15
@markn6246 Жыл бұрын
Heating not getting hot at all, blower works but doesn't get warm any ideas?
@SchussinBoots Жыл бұрын
I was actually searching for Disco Sport Snow testing videos….. what a welcome relief this was 🤣 🤣 Brilliant!! (And really good to know it can handle the max towing load efficiently 😝) 😂
@tombarber2053 Жыл бұрын
Great tutorial, helped me sort out mine👍
@martinpearce8516 Жыл бұрын
what is the name of the part
@tayyibabrar1409 Жыл бұрын
Hi mate, after replacing the cracked ma ifold how long should it last? I would be extremely grateful for your expeditious reply
@iaintaylor9972 Жыл бұрын
Another 80k miles or so
@shanefrank3281 Жыл бұрын
Fantastic video. The first to fail on my 2015 Evoque was the left rear and it was over $200 for the new actuator. The front left is going out now and I have a motor ready to go. Thank you!
@bboysonicvincent1806 Жыл бұрын
Hi. Same is my. I bought the actuator for drivers side cost 80pounds for a part. And after repair. My another two door are out again. Please what part are motor number please.
@shanefrank3281 Жыл бұрын
@@bboysonicvincent1806 I don't have a part number. It is a motor I found on eBay. It worked great. "car door lock actuator motor for Ford Mondeo Mazda m3 land Rover Volvo" was the name of what I purchased.
@bpage6636 Жыл бұрын
Thank you for this video. Will they fit 2015 evoque actuator?
@iaintaylor9972 Жыл бұрын
Sure will 👍
@bpage6636 Жыл бұрын
@@iaintaylor9972 How much will it cost me for 4 and how can order them? What is the actual part # for the keyless entry?
Is the brake pad wear sensor something you are supposed to replace at the same time you put new pads on? It seemed like you were saying that the service person unplugged the sensor when changing out the pads and forgot to plug it back in or something . . .
@mr_zsfez3278 Жыл бұрын
Bought mine 2 weeks ago. In black too. Such a joy to drive. 06 plate on 80k Miles and is immaculate inside and nearly on the out 😂. I love it though
Пікірлер
Many thanks for this excellent video. Just done the driver’s side on an Evoque with an external keyed lock. Much easier with the external handle removed. I left all the actuator cables (3) attached. Got both motors on EBay for £15. ‘Almost’ looking forward to the next lock failing just for the satisfaction of mending it!!
how did you open the door
What! Are you Saying!
speak up
Thanks for the encouragement 🤣
Hi Iain. Great video, started my driver side manifold relacement this evening, and did you have to remove the solid fuel rail that supplies the injector pipes. If so what socket did you use please? Thanks Gary
Just picked up a 1.6d drive .. first car with heated seats.. ❤❤ drives great.
Great video! If the actuator has failed in locked position, is it possible to remove door actuator without opening the door? My Rear right door is closed and will not open no matter what i try. I’ve removed interior panel and window regulator. Pulled on everything my fingers can touch and it won’t open. Is my only option to actually handsaw the latch off? Thank you
How did you fix yours when it was in the locked position?
@@richardadcock6398 I started trying to brake or snap the actuator using a screwdriver thru the little bit of access I had by removing door interior panel Eventually I heard something click/break and at that moment the door released. Once it was open I had the actuator removed in a short amount of time
Very helpful cheers
pig of a job ,,, well done. tip ,,, jam a rag down the bulkhead where the battery tray sits , otherwise ratchets etc have a way of ending up in the gear box belly pan ,,, dont ask me how I know this.
Thanks for this video! All numbers 1-4 are now back working on my Ford Fiesta! Great video 👍🏻
The Ebay link doesn't work & I need 2 as well
Thanks for the heads up, link updated, should be working now 👍
www.ebay.co.uk/itm/166139166525?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hmGWdIVYSjq&sssrc=2524149&ssuid=hmGWdIVYSjq&var=&widget_ver=artemis&media=COPY
Thanks for the video. Followed it all the way and I can now hear the glorious sound of 1, 2 and 3. 😂 Much appreciated, especially for someone who has no clue about cars. 🤩
Hi, did you need to drill out the in inlet for the breather pipe. I've been told you do and been told you don't
Hi Ian, Never heard of that, I didn't....
Same problem this morning part now ordered after watching your helpful video
I replaced mine when I replaced the brakes and it didn't go off. The front pads ate still good. How do I get the warning off?
Do you still sell these motors? I have the one in my car working whenever it feels like it…
Ordered a motor from you and completed the job today on the back door passenger side. The most difficult part I found was getting the actuator, and the door handle out. But now it's all sorted, now I need to do the same on the driver's door!
Yeh it can be a little tight, well done 👍
How do you bleed the fuel after
Just crank the engine, don't crank for more than 10 seconds at a time, you need to let the starter to cool down otherwise it'll overheat. So 10 seconds crank 1 minute cool down, repeat.
Cheers bud,nipped out and got one for mine,all good👍👍👍
I had the same problem. Thank you my friend. I fix it!
Are you still selling these as the link doesn't work?
www.ebay.co.uk/itm/166139166525?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hmGWdIVYSjq&sssrc=4429486&ssuid=hmGWdIVYSjq&var=&widget_ver=artemis&media=SMS
Alright Ian! Great we video pal! Going to be doing both L & R inlets this wee week! Kids of school etc! I’m thinking of sending me wee injectors off to ultrasonic injector cleaning! I canni say there is nothing wrong with the injectors! But thinking it’s worth it pal!
Hello, I have an oil leak from this place, the valve cover. Should I change the cover on the supercharged engine?
What is this part called again i have the same problem many thanks
Did u find what its called i need one too
Resister
I got same problem but some garages asking for nearly £1000 to change it.
I always find it funny when people say that a C30 is a Focus underneath as though it’s a bad thing… that era of focus was a great car… possibly a little bland outside of the ST/RS variants, but they’re a dependable and fantastic handling car… and the C30 adds a layer of comfort and luxury over that. Mine is a D5 (Polestar optimised) R design with the same plush leather as the one you’re driving there… it’s done 165k but it’s been properly cared for with bushes and suspension components replaced when needed, and the exterior and interior look like new still. Mine is pre-facelift, but has the Xenon headlamps and I love the way it looks, the R design kit looks superb on them in my opinion. Mine is also keyless which means you don’t have to have the keys hanging out of the dashboard (unlike my C70)… it’s a nice option if you can find it, I hate having a bunch of keys hanging from the front of the dash.
This video helped me alot.
Random question, what does the brown wiring loom on top of the engine supply?
I just bought a t 5
We appreciate you taking the time to make this video, but if you don't show how you got the door to open so you could remove the inner part, this information is worthless!
That's for your critical comment, Why don't you make your own video?
@@iaintaylor9972 I just may; now that I figured out how to do it!
@@mysilentnoise4510 look forward to watching it.
I've recently bought a L319 disco 4 65 reg which has a sdv6 engine. Are these cracked manifolds common across all models and years? Mine has 66k miles currently. I thought your video very informative but hope I don't get the problem!
Hi there , how did you manage to open the rear door if the buttons didn't open it ? I have the same problem but how can I open it so I can take off the door panel to get to the acuator or other parts I might need to change ?
Thank you so much. Great video
In my fiesta 2009 no light on heather. Just led diode on ac. What could be problem?
My range rover sport is locked inside and unlocked but if I locked with remote is not working but if I unlocked it is working
Hi can I get two motors please
www.ebay.co.uk/itm/164886873051?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hmGWdIVYSjq&sssrc=2349624&ssuid=hmGWdIVYSjq&var=&widget_ver=artemis&media=SMS
RHD, so he is probably not from the Netherlands but most likely is a true Scotsman. 😊
Excellent. Now can do mine.
Thanks for the video mate, just took the driver one out and now struggling to get the new one in. Is there any tips of tricks or just a bit of pressure and patients? Thanks
Lose the hat.
thanks much this was really helpful and simple to follow (access aside, hats off for filming and getting in there!); a reasonably quick fixand even for a complete newbie. Note 2016 fiesta needed torx 10 not 15
Heating not getting hot at all, blower works but doesn't get warm any ideas?
I was actually searching for Disco Sport Snow testing videos….. what a welcome relief this was 🤣 🤣 Brilliant!! (And really good to know it can handle the max towing load efficiently 😝) 😂
Great tutorial, helped me sort out mine👍
what is the name of the part
Hi mate, after replacing the cracked ma ifold how long should it last? I would be extremely grateful for your expeditious reply
Another 80k miles or so
Fantastic video. The first to fail on my 2015 Evoque was the left rear and it was over $200 for the new actuator. The front left is going out now and I have a motor ready to go. Thank you!
Hi. Same is my. I bought the actuator for drivers side cost 80pounds for a part. And after repair. My another two door are out again. Please what part are motor number please.
@@bboysonicvincent1806 I don't have a part number. It is a motor I found on eBay. It worked great. "car door lock actuator motor for Ford Mondeo Mazda m3 land Rover Volvo" was the name of what I purchased.
Thank you for this video. Will they fit 2015 evoque actuator?
Sure will 👍
@@iaintaylor9972 How much will it cost me for 4 and how can order them? What is the actual part # for the keyless entry?
ebay.co.uk/itm/164886873051?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hmGWdIVYSjq&sssrc=2349624&ssuid=hmGWdIVYSjq&var=&widget_ver=artemis&media=SMS
Is the brake pad wear sensor something you are supposed to replace at the same time you put new pads on? It seemed like you were saying that the service person unplugged the sensor when changing out the pads and forgot to plug it back in or something . . .
Bought mine 2 weeks ago. In black too. Such a joy to drive. 06 plate on 80k Miles and is immaculate inside and nearly on the out 😂. I love it though
RANGE ROVER IS TRASH!!!