Пікірлер

• 
  @adgieem126 күн бұрын

  You lost me at your loose wheel. Please Be more prepared when making a video ,

• 
  @WilliamLancaster-tg1ze26 күн бұрын

  Sorry about the loose wheel. You must have found that annoying. You need not look at any of my other videos. I like to show Woodturning as it really is. Some of those flaws provide teaching moments.

• 
  @tommiller42332 ай бұрын

  Thanks for the video. I’ve purchased the Paul Howard jig and was hoping for information about securing the router . I see that you are using a Makita RT 0701c router . Did you have to make any modifications in order to fit the router into the jig or does it fit without modifications. I was able to purchase the fluting jig from Black Forest Wood Co. in Canada.

• 
  @WilliamLancaster-tg1ze2 ай бұрын

  I bought this particular router because it was the American router that fit the Paul Howard jig.

• 
  @NBCRGraphicDesign2 ай бұрын

  Glad to find your video.... I'm trying to see if the jig will fit a lathe with a 25" swing or if i need to build a riser. I'll have to look at Whiteside's extra long corebox bits, too

• 
  @WilliamLancaster-tg1ze2 ай бұрын

  If you build a riser, you can make it where it will slope toward the headstock. This will slant your flutes. I tell you what, it's fun to see what you can do. See my video on slanting your flutes.

• 
  @RodnyMark3 ай бұрын

  hey William, I will like to inform you about the opportunity to generate passive income from your videos on KZread. By facilitating genuine and active engagement, I can assist in fostering growth for your channel. If you're interested, let's collaborate to explore and implement this potential together.

• 
  @lenshandcraftedwoodsigns60333 ай бұрын

  Cool

• 
  @misfitramone3 ай бұрын

  Beautiful work!

• 
  @pedrohenriquehernandes76093 ай бұрын

  very very good, greetings from Brazil❤❤

• 
  @jonsayre94044 ай бұрын

  Very nice. A good project.

• 
  @johnbauby66124 ай бұрын

  Looks like a hell of a lot of work

• 
  @WilliamLancaster-tg1ze4 ай бұрын

  Yes, I suppose so. And expense!

• 
  @knightlylad5 ай бұрын

  Please watch some videos ( Alain Batty, for example) and keep it up, never give up, you're not rubbing the bevel, you have some great tools there and a superb lathe, good luck.

• 
  @WilliamLancaster-tg1ze5 ай бұрын

  I have watched Alan Batty’s video more than once. He is a master.

• 
  @Gregbrowning946 ай бұрын

  I didn’t hear what the inserts for the handle was called. Could you put it in comments and where to get.

• 
  @WilliamLancaster-tg1ze6 ай бұрын

  You can buy all the inserts, handles, sticks, and feet and more from Treeline. It is online. I don’t know a name for the inserts. I used “all thread” rod from Ace Hardware, about four inches long. I cut it a bit shorter to fit the hole a friend had drilled.

• 
  @JesseNewcomer16 ай бұрын

  thanks for sharing, i've now added make a cane to my project list :)

• 
  @WilliamLancaster-tg1ze6 ай бұрын

  Great! Find the parts at Treeline.

• 
  @jimpartridge96348 ай бұрын

  Can to comment on the limitations of 6” wheels?

• 
  @WilliamLancaster-tg1ze8 ай бұрын

  I have never used a six-inch grinder. Most woodturners use an eight-inch slow speed grinder. I suppose you could adapt.

• 
  @pietjepuk957511 ай бұрын

  😴😴😴😴🙄🙄🙄🙄🤦‍♂🤦‍♂🤦‍♂🤦‍♂

• 
  @Reviews-Tidbits11 ай бұрын

  That only works with an 8 inch wheel

• 
  @WilliamLancaster-tg1ze11 ай бұрын

  Probably so. Woodturners mostly have slow-speed grinders with 8-inch wheels. I honestly had not thought about other types of sharpening.

• 
  @michaelcolley7832 Жыл бұрын

  What lathe are you using

• 
  @WilliamLancaster-tg1ze Жыл бұрын

  My lathe is a PowerMatic 3520B.

• 
  @davidmorgan5557 Жыл бұрын

  Nice bowl. Where'd you get the paul howard jig?

• 
  @WilliamLancaster-tg1ze Жыл бұрын

  I ordered the Paul Howard jig directly from Paul Howard in England. I don't remember shipping being too costly. Then I bought the router in US.

• 
  @larrykerins3418 Жыл бұрын

  very helpful to me thank you excellent video

• 
  @WilliamLancaster-tg1ze Жыл бұрын

  Thank you!

• 
  @jonsayre9404 Жыл бұрын

  Thank you. Always learning!!

• 
  @darylzorn7037 Жыл бұрын

  Very informative, thankyou for doing the video

• 
  @im4dabirds Жыл бұрын

  great info, thanks Bill

• 
  @jonsayre9404 Жыл бұрын

  Very informative. Thank you.

• 
  @WilliamLancaster-tg1ze Жыл бұрын

  Thank you, John. I lost the audio for the first part and had tor redo it. I’m glad it was still informative.

• 
  @jonsayre9404 Жыл бұрын

  Practice practice.

• 
  @WilliamLancaster-tg1ze Жыл бұрын

  Oh, yes. It’s a pretty steep learning curve.

• 
  @gregboutelle39022 жыл бұрын

  What grit are you using here?

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  It's a 180, but a lower grit would probably be better. Maybe 80.

• 
  @gregboutelle39022 жыл бұрын

  @@WilliamLancaster-tg1ze Thanks! I just picked up a new D way NRS. I have a 180, so I'll have to get by with that for now.

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  @@gregboutelle3902 fantastic I want a D-way.

• 
  @mikethompson72902 жыл бұрын

  Will a system like this work well on a glued up blank made from say 14x14 3/4 hard maple ? I read that the coring system is best used on semi wet wood. What do you think?

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  I believe it will work well. Let the glue cure completely. Squirt water into the kerf the whole way. Blow the sawdust out of the kerf as you go. Water should have a drop of Dawn detergent in it as a wetting agent.

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  I think it would be best also to use the Titebond glue that is water resistant. Is that Titebond III?

• 
  @anaphylaxis25482 жыл бұрын

  I've been using the Beall system for years and I really like it!

• 
  @jonsayre94042 жыл бұрын

  Very interesting with big holes. I do a lot of bowls with worm holes and rot. Now I know how to fix that problem. Thanks for the information !!

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  John, my fill of the worm holes in the side of the bowl failed. There was too much of a curve and too much of the fill ran out. The fill at the bottom of the bowl did perfectly.

• 
  @kfelderhoff2 жыл бұрын

  Great Job!!!

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Thanks, Kevin.

• 
  @AllenOxendine2 жыл бұрын

  Thanks for sharing, cool demonstration. Full View and Like 👍

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Thanks!

• 
  @AllenOxendine2 жыл бұрын

  Interesting, seeing it being made would been nice

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Look at the “Slant your Flutes” video to see some being made.

• 
  @franktravis28422 жыл бұрын

  Thanks Bill, Just got my Oneway Coring System. You Demo is a great start.

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Thanks, Frank. I hope yours turns out as well as my demo piece. The last knock out piece was a bit of luck.

• 
  @randellspencer20352 жыл бұрын

  Very informative. I currently just turn "Brown & Round" but have been thinking about trying some stain on some glued up pine blanks I have laying around the shop. I glued up some pine for something for my grandson to play with. Since I don't expect to see him until this summer, I will have time gather up some more sawmill scrap & make more bowl blanks.

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Randell, Sounds good to me. Pine is not the best for natural grain, but perfect for paint.

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Randall, another thought about pine. White pine is probably okay, but yellow pine might have oils that will emerge through paint or other finishes. I would stay away from yellow pine for that reason.I am not sure if even Kilz primer will block the yellow pine oils.

• 
  @markb89542 жыл бұрын

  Nice little set-up there with nice results. I would have enjoyed seeing you make a few passes.

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Mark, I made passes in one of the videos. I will look at the slanting one and see.

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Mark, yes,it is the short slanting video in which I make several passes. Slant Your Flutes.

• 
  @thepappie2 жыл бұрын

  So, I'm the 4th one to watch this. Good job William

• 
  @felixbaader68172 жыл бұрын

  Thanks Bill, I do have the OneWay system as well and cored tons of green bowls. However only once a dried piece of apple tree. Thanks to your comments I learned that water trick as well as the one with the inch marks on the knife arm…greetings from Zurich, Felix

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Thanks, Felix. I am very glad it was helpful.

• 
  @jimfromri2 жыл бұрын

  Thank you, just the information I was looking for! Are your wheels 8 inch?

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Yes, they are 8-inch wheels on a low speed grinder. My wheels are 180 and 220, although I got the 220 at a special sale. Better might be a 180 and an 80.

• 
  @bradleyheathhaysable2 жыл бұрын

  Thanks Bill, very thoughtful instruction.

• 
  @Steve-ht3ry2 жыл бұрын

  Bill thanks! The measuring jig was worth the price of admission. Became a new subscriber!

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Glad it was helpful.

• 
  @jonsayre94042 жыл бұрын

  Good demo. I’m also starting to learn the Beal system. Thanks

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Thanks. I am starting to learn. Part of my problem was using the wrong Waterlox. I should have used the sealer/finisher one.

• 
  @lenstout72982 жыл бұрын

  Needed more on the actual wire brushing and a close up of the effect. Otherwise ok.

• 
  @WilliamLancaster-tg1ze2 жыл бұрын

  Thanks, Len. Maybe I can do that on another video. I’m learning.

• 
  @ericmoorehead11003 жыл бұрын

  Is a skew considered negative rake because it has a bevel on both sides?

• 
  @WilliamLancaster-tg1ze3 жыл бұрын

  Technically, Yes, though I have not had good results using a skew this way. BTW, a parting tool is also a type of skew.

• 
  @davehaskett92683 жыл бұрын

  Thanks for your videos Bill. Very informative. I would like to know the grits of your CBN wheels.

• 
  @WilliamLancaster-tg1ze3 жыл бұрын

  Thank you. I use a 180 on the platform and a 220 on the Wolverine, but only because I got the 220 at a great sale price. It might be better to have an 80 and a 180, with the 80 on the platform. Actually, I’m happy with mine as they are.

• 
  @davehaskett92683 жыл бұрын

  @@WilliamLancaster-tg1ze Thanks Bill

• 
  @jonlanier_3 жыл бұрын

  Ron Brown created a jig to use with the Veritas to make a perfectly clean 40-40 gring... It's fantastic. And I don't need that huge expensive Stuart Batty platform. Love Stewart and what he did for turning... but thankful for Ron... figuring out the angles needed so you can use a jig.

• 
  @turnedbysean20233 жыл бұрын

  Nice effect. Enjoyed the video

• 
  @turnedbysean20233 жыл бұрын

  Good demonstration video. I Will be purchasing one of these when I upsize my lathe.

• 
  @jonsayre94043 жыл бұрын

  Very informative and good explanation. I been thinking of buying the One Way system. Where did you purchase yours? Also can you core a green bowl?

• 
  @WilliamLancaster-tg1ze3 жыл бұрын

  Green bowls are even easier. I bought the base from a friend and the blades and all from One Way. You might try Packard tools online or in Tryon, NC.

• 
  @bryanholden64873 жыл бұрын

  Helpful, thankyou. :-)

• 
  @WilliamLancaster-tg1ze3 жыл бұрын

  Glad it was helpful!

• 
  @IlanDavid3 жыл бұрын

  Hi William, What grit CBN wheels do you use for this?

• 
  @WilliamLancaster-tg1ze3 жыл бұрын

  I use 180 and 220 grit wheels, but only because I got the 220 on sale. Better choices would probably be 80 and 180.

• 
  @lagswitch85253 жыл бұрын

  kzread.info/dash/bejne/g4GKqcOnm8ixYKw.html here's the link

• 
  @lagswitch85253 жыл бұрын

  At 40 degrees here I'll post a Stu batty video link that may help you guys understand