How long you used this Vland tail light? I am going to buy a R style tail light but worried about the quality.
@playingcars95777 күн бұрын
I've had them for 3 months and all has been good with them. Only complaints I have are one of my outer lights that use the white plastic bolt with the spring didn't line up well so it was a pain to put in so there's a slight gap along the top but can only be seen if you are standing right next to it looking down from above. Then I added some caulk along the top edge of the outer lights since they didn't look well sealed in some spots. But otherwise they've been great so far.
@Suavthoj9211 күн бұрын
Finally a video to confirms and solves this issue for others. Nice tutorial bro!
@playingcars95777 күн бұрын
Thank you, I’m glad we could help confirm it!
@david_haddad787820 күн бұрын
I did exactly as you said in the video and it still doesn't work, I put the blue wire at the end of the row of switches to be together with the white one and it still doesn't work
@playingcars957718 күн бұрын
That's odd, that should have worked. Next step I'd say is to make sure the pin is all the way in and all the electrical connections are good? Is it lighting up when in reverse, and if so what color?
@aucklandsadventures22 күн бұрын
Except on VW’s, when the gas gauge is Empty, it covers the arrow.
@playingcars957718 күн бұрын
Whelp at that point best to fill up even if having to with the hose going around the car.
@seqhawk105624 күн бұрын
Sad that a video like this has to be created lol. People truly are dumb 😂
@KARMAL8224 күн бұрын
If the car was made in a country where the steering wheel is on the left side, then the gas cap will be on the right side. If the car was made in a country where the steering wheel is on the right side, then the gas cap will be on the left side.
@J8den24 күн бұрын
Instructions uncleared, My tesla now takes E85
@muhammadlouqman150324 күн бұрын
🏆
@zues0o29 күн бұрын
What do you do with the extra yellow and black connectors on both harnesses?
@playingcars957727 күн бұрын
The extra one? Which light is it coming from, the outer lights or the hatch lights? There are two connectors that have yellow and black wires coming out. One is a grey colored connector shown in the video at 8:26 that goes to the black resistor boxes for the outer lights. Then the second connector is a small black one with long yellow and black wires coming out that connects between the outer light and the hatch light to get the sequential blinker.
@nedmulder4887Ай бұрын
did you simply pull out the blue wire from the black housing or have to do something special to remove it, i feel i'm pulling too hard and it'll break. thanks
@playingcars9577Ай бұрын
Yeah i just pulled it out of the housing. It was really hard to pull put. You could try pushing the silver pin downward a bit and pull the blue wire since those silver pins on the end of the wire have a little botch thing that helps it stay in the black housing.
@PeeeKaayАй бұрын
Question: Can I use that same OEM light switch to have auxiliary fog lights fitted to.? I'd have yellow fog lights mounted & want the wiring to access the OEM switch. Then when I pull the switch, it should light the 1 rear fog + front auxiliary fog lights.? Y.? I have 2018 MK7.5 Golf R, and they don't have fog lights. I would like to add them! Should work.?
@playingcars9577Ай бұрын
Does your switch pull out at all even though you dont have fogs? If it does then i think you could use that switch but if not then youd probably have to look at getting a euro switch which has all the settings like parking lights and both front and rear fogs. Thats how mine is at least. Id have to get a euro switch to get rear fog functionality. Then if there aren’t any kits out there for the mk7 Rs you could look at getting mk7 gti fog harnesses to use with that switch and then lights that fit your bumper.
@moose67902 ай бұрын
great video!
@playingcars95772 ай бұрын
Thank you! I’m glad you enjoyed it :)
@omardelrio54422 ай бұрын
Mi sueño es ir ahí
@playingcars95772 ай бұрын
It is definitely worth it if you get the chance!
@DjDenKot2 ай бұрын
great !
@Bido.0662 ай бұрын
Oh Psychological comfort when watching such clips
@vilius15323 ай бұрын
Damn that's nice
@playingcars95772 ай бұрын
That was about 2 kilometers from the track. The whole area feels like Motorsport Heaven, definitely worth a visit if you get the chance
@UncleDougsGaming3 ай бұрын
single turbo sounds better change my mind
@n0t0vicri0us3 ай бұрын
Pretty sure the door panel trim is plastic riveted into the panel, once you pop em off they aren't really held in after that. I know because I've had to drill rivets back there when I swapped handles to door pull straps. Do they stay in or are they loose? I just lay the vinyl without taking them off.
@playingcars95772 ай бұрын
They are kind of loose in the corners furthest from the door handles. I added some double sided tape to the back and they've been good.
@yasinc.13507 ай бұрын
All of the pins broke on my golf, looks like there is gleu used in the holes
@playingcars95777 ай бұрын
Hmmm that sounds not great. Going to try carving the glue out? I'm planning to use a little double sided tape to help keep mine in snug.
@n0t0vicri0us3 ай бұрын
@playingcars9577 Take panel off and drill them out if you want to take them off, otherwise just lay the vinyl with them in place, it works perfectly.
@pcustomspl7 ай бұрын
Finally someone show it 💪 thanks and good job man
@playingcars95777 ай бұрын
Thank you! Glad I could help you out!
@thesweglestory3767 Жыл бұрын
You should invest in a microphone my friend
@playingcars9577 Жыл бұрын
Indeed. I got a couple puffy wind cancelation things for the current mic to try out first.
Пікірлер
How long you used this Vland tail light? I am going to buy a R style tail light but worried about the quality.
I've had them for 3 months and all has been good with them. Only complaints I have are one of my outer lights that use the white plastic bolt with the spring didn't line up well so it was a pain to put in so there's a slight gap along the top but can only be seen if you are standing right next to it looking down from above. Then I added some caulk along the top edge of the outer lights since they didn't look well sealed in some spots. But otherwise they've been great so far.
Finally a video to confirms and solves this issue for others. Nice tutorial bro!
Thank you, I’m glad we could help confirm it!
I did exactly as you said in the video and it still doesn't work, I put the blue wire at the end of the row of switches to be together with the white one and it still doesn't work
That's odd, that should have worked. Next step I'd say is to make sure the pin is all the way in and all the electrical connections are good? Is it lighting up when in reverse, and if so what color?
Except on VW’s, when the gas gauge is Empty, it covers the arrow.
Whelp at that point best to fill up even if having to with the hose going around the car.
Sad that a video like this has to be created lol. People truly are dumb 😂
If the car was made in a country where the steering wheel is on the left side, then the gas cap will be on the right side. If the car was made in a country where the steering wheel is on the right side, then the gas cap will be on the left side.
Instructions uncleared, My tesla now takes E85
🏆
What do you do with the extra yellow and black connectors on both harnesses?
The extra one? Which light is it coming from, the outer lights or the hatch lights? There are two connectors that have yellow and black wires coming out. One is a grey colored connector shown in the video at 8:26 that goes to the black resistor boxes for the outer lights. Then the second connector is a small black one with long yellow and black wires coming out that connects between the outer light and the hatch light to get the sequential blinker.
did you simply pull out the blue wire from the black housing or have to do something special to remove it, i feel i'm pulling too hard and it'll break. thanks
Yeah i just pulled it out of the housing. It was really hard to pull put. You could try pushing the silver pin downward a bit and pull the blue wire since those silver pins on the end of the wire have a little botch thing that helps it stay in the black housing.
Question: Can I use that same OEM light switch to have auxiliary fog lights fitted to.? I'd have yellow fog lights mounted & want the wiring to access the OEM switch. Then when I pull the switch, it should light the 1 rear fog + front auxiliary fog lights.? Y.? I have 2018 MK7.5 Golf R, and they don't have fog lights. I would like to add them! Should work.?
Does your switch pull out at all even though you dont have fogs? If it does then i think you could use that switch but if not then youd probably have to look at getting a euro switch which has all the settings like parking lights and both front and rear fogs. Thats how mine is at least. Id have to get a euro switch to get rear fog functionality. Then if there aren’t any kits out there for the mk7 Rs you could look at getting mk7 gti fog harnesses to use with that switch and then lights that fit your bumper.
great video!
Thank you! I’m glad you enjoyed it :)
Mi sueño es ir ahí
It is definitely worth it if you get the chance!
great !
Oh Psychological comfort when watching such clips
Damn that's nice
That was about 2 kilometers from the track. The whole area feels like Motorsport Heaven, definitely worth a visit if you get the chance
single turbo sounds better change my mind
Pretty sure the door panel trim is plastic riveted into the panel, once you pop em off they aren't really held in after that. I know because I've had to drill rivets back there when I swapped handles to door pull straps. Do they stay in or are they loose? I just lay the vinyl without taking them off.
They are kind of loose in the corners furthest from the door handles. I added some double sided tape to the back and they've been good.
All of the pins broke on my golf, looks like there is gleu used in the holes
Hmmm that sounds not great. Going to try carving the glue out? I'm planning to use a little double sided tape to help keep mine in snug.
@playingcars9577 Take panel off and drill them out if you want to take them off, otherwise just lay the vinyl with them in place, it works perfectly.
Finally someone show it 💪 thanks and good job man
Thank you! Glad I could help you out!
You should invest in a microphone my friend
Indeed. I got a couple puffy wind cancelation things for the current mic to try out first.