Getting ready to buy a new welder "feeder" i use to stick weld takes to long and not clean.what welder would you recomend ,? Or what would work good from home depot? Thanks clean work.
@pucegtr19 күн бұрын
Nice WORK HOMIE!!!
@RedRocket6419 күн бұрын
Thank you! 🤝
@frankthompson94222 күн бұрын
My first car in 1966 from my father. Same color but 4door. Same exact color. It had a 283 cu in engine automatic and had a Rochester 4 barrel. I loved that car. Had to sell went into military in1967. Awesome car brother!
@mikeavila811625 күн бұрын
Do you install moonroof? I have 63 looking to 44in installed
@queenmedusa255426 күн бұрын
this is off topic from the video but what kind of adhesive would you suggest using to put metal wheel chips in my ko caps
@RedRocket6426 күн бұрын
@@queenmedusa2554 E600 glue would be the best option, it’s self leveling so make sure the caps are flat, once you adhere the chip to the cap use masking tape so the chip won’t move, let dry for 24 hours, remove masking tape and your set. I’ve owned more knockoffs then I would like to say and I’ve never lost a chip using this method, hope this helps 👍
@queenmedusa255425 күн бұрын
bet,good looking out,u and your team are outcold with these builds,very inspiring!!!should i scuff the surface of the cap and chip before gluing?and should i do it after the caps are installed or when there off the car,im not sure if smacking 0:10 em with the lead hammer will break the glue loose.
@HogHead50426 күн бұрын
I just ordered one
@TiK2theToKАй бұрын
Dayum that shit is so clean
@RedRocket64Ай бұрын
@@TiK2theToK thank you 🙏
@edgrabski1390Ай бұрын
Hi Jonny How is everything after all the crazy weather ????? I Emailed Ken at his work on Monday but have not heard anything from him. Hope everything is OK
@RedRocket64Ай бұрын
All good over here Ed, no significant damage at all, kens job did not have power so he didn’t have to go to work, the whole credence crew is ok, thanks for asking Ed 👍
@edgrabski1390Ай бұрын
Very Happy you are all OK. My Wife is on the Weather 24/7 when the weather gets bad. Nice info on the Headlight Buckets 58's were the worst here with the salt in the Winter, the whole top of the fender would rot out and the NYS Inspection required that they check the Headlight Alignment so your lights did not blind someone coming at you.
@RedRocket64Ай бұрын
@@edgrabski1390 I don’t blame her with all the crazy weather going around, 58s did have it way worse 😬
@juansaladzarАй бұрын
Jesus that’s your dream car? Dood there is nicer sh_t out there in the world you may need to up your status brah
@MarkMeldrumChevelleHuntersАй бұрын
Thanks for your help, I am putting together a 59 Impala was taken apart several owners ago.
@RedRocket64Ай бұрын
You’re welcome, glad the video helped! 👍✔️
@renealaniz6066Ай бұрын
Clean ass car bro 💯🙌🏻🔥🇲🇽
@RedRocket64Ай бұрын
@@renealaniz6066 thank you sir ✔️👍
@lowridercoloringbookАй бұрын
Very nice work! Those emblems look great!😎👍
@RedRocket64Ай бұрын
@@lowridercoloringbook Thank you 😎👍
@AngelCruz-gk9pyАй бұрын
Those Daytons are clean as hell
@mrgreezy1Ай бұрын
How you get them windows so fogged up holmes ?? 😉💯
@geo611Ай бұрын
I have an original paint 59 delivery and it has the slanted headlights! Also if you look at the stock outer door handles they run uphill to the front. Thanks for the great videos.
@RedRocket64Ай бұрын
@@geo611 There you have it! Hopefully more will notice, you’re welcome, thanks for the support 👍🤝
On the video you say 7/16 but on the link you say 9/16 and the site doesn’t have 9/16 can you please clarify thanks
@RedRocket64Ай бұрын
7/16-14 cage nut.
@charliemclaughlin1042Ай бұрын
She's beautiful except for the wheels
@RedRocket64Ай бұрын
@@charliemclaughlin1042 Thank you👍
@hornetbrownАй бұрын
Mark VI in cold effect. Djeah.
@enviouscreationscarclub1Ай бұрын
Faaaaaa , I ain't going to lie am jealous as F 😃👊🏼🍻
@javierflores4605Ай бұрын
On point 👌👌
@RedRocket64Ай бұрын
@@javierflores4605 thank you 👍🤝
@HectorPerez-yp2miАй бұрын
He'll yeah brother keep that hustle 💪 Going
@RedRocket64Ай бұрын
😎
@gorillakingzinc6206Ай бұрын
Clean asf 🫡
@RedRocket64Ай бұрын
@@gorillakingzinc6206 Appreciate that!! ✔️🤝
@loniecruz9824Ай бұрын
BOXSTATECOLORADO. CAME OUT DOPE. LIKE THAT YOU SHOW EVERY THING U DO. YOUR NOT STASH WITH THE NOLLEDGE PEOPLE CAN LEARN. SIK.
@RedRocket64Ай бұрын
@@loniecruz9824 Thank you sir, I’m going to post every bit of this build on here, engine swap, wiring, hydraulics power windows ect. Stay tuned 👍
@loniecruz9824Ай бұрын
@@RedRocket64 BOXSTATECOLORADO. YOU SHOWED A LOT WITH RED BUILD. GREAT STUFF.
@lonestarlowsАй бұрын
Nice work sir
@gavendelrio9193Ай бұрын
Valuable info man. Thank you for sharing! great video!
@RedRocket64Ай бұрын
@@gavendelrio9193 Thank you for the feedback 👍✔️
@DarealSwisher2100Ай бұрын
Bro definitely got him some Hawk Tuey on the road…💯
@arnoldsital3466Ай бұрын
Oh baby😊
@RedRocket64Ай бұрын
@@arnoldsital3466 😎✔️
@frankmartinez4856Ай бұрын
Learned a lot from your video 🤗planning to pickup. 1959 Impala, or Bonniville, Electra 225 Vista (4dr. H/T) one of these soon 😳Thanks, SIR 😬
@RedRocket64Ай бұрын
All great choices! You’re welcome 👍🤝✔️
@jamesbarnes7045Ай бұрын
I look forward to your videos your fucking awesome bro Good work
@RedRocket64Ай бұрын
Thank you sir! Plenty more to come 👍
@abelsabedra1959Ай бұрын
Definitely interested in the fuel injection emblems and flags! I’ve been looking for some!
@RedRocket64Ай бұрын
Coming soon, I’ll make a video when they are ready 👍
@abelsabedra1959Ай бұрын
@@RedRocket64 how about the paint dividers used to split the two tone on the top of the fins. Those might be worth a remake if you can do it.
@user-jk4zj9uy5l28 күн бұрын
@@RedRocket64how much you going to be selling them for.
@Juliovee123Ай бұрын
Need the FI emblems! Sign me up for a pair Palabra For my 59 el Camino lol
@RedRocket64Ай бұрын
Will do brother, I’ll make a video once they are ready ✔️👍
@Juliovee123Ай бұрын
@@RedRocket64I don’t have social media but I do have KZread and eBay if you can link wherever you are selling them in the video when they are ready I would appreciate it! Will be waiting
@RedRocket64Ай бұрын
@@Juliovee123 Sounds Good brother 👍✔️
@neuyen001Ай бұрын
Awesome work on the fuel injection logos
@RedRocket64Ай бұрын
Thank you!
@JamesSmith-oe1otАй бұрын
Nice procedure Now is the time to take care of all those little items that need attention. Are you gonna block this car assembled? Panel to panel? Happy 4th!!
@RedRocket64Ай бұрын
Happy 4th James! The panels are pretty straight, there is only one corner on the bottom passenger door that is killing me, the rest of the door is lined up perfect, I’ve adjusted it as much as I can, not sure how to approach it just yet 😬
@fleetwood9142Ай бұрын
Perfection 👌 makes it more valuable to every car owner good 👍 job..Always getting down
@RedRocket64Ай бұрын
Thank you! 😎✔️
@busaracer590Ай бұрын
Great video bruh awesome 👌🏾 👏🏾 👍🏾 🏁🏁🏁💯💯💯🔥🔥🔥
@RedRocket64Ай бұрын
@@busaracer590 Thank you sir!!
@user-ee4nf4dt8vАй бұрын
Incredible body work!! Can you make a video on how you use the slap spoon? Thanks brother! You keep us inspired!!👍🏽💪🏽
@RedRocket64Ай бұрын
Thank you! Glad the videos help, yes I’ll make a video soon on the shrink disk and slap spoon 👍
@robertyepez2145Ай бұрын
🔥🔥🔥
@RedRocket64Ай бұрын
@@robertyepez2145 👍
@neuyen001Ай бұрын
Great work. Make some templates if possible on your fender top spears...someone needs it
@RedRocket64Ай бұрын
@@neuyen001 10-4 👍
@michaelmendoza820Ай бұрын
Firma build homie!
@RedRocket64Ай бұрын
@@michaelmendoza820 Thank you bro 👍
@robsoultrain1061Ай бұрын
💪🏾💪🏾🔥💯
@RedRocket64Ай бұрын
@@robsoultrain1061 👍🚀
@JamesSmith-oe1otАй бұрын
Great series of videos. Especially for first timers with LS/LT swaps. Gets interesting with tunnel hump mods with 6L80 and 64SS with console.....lol.....There is always a way ! Do you have a plan for your shifter linkage?
@RedRocket64Ай бұрын
@@JamesSmith-oe1ot Thanks James, that console can get tricky, you could get away with 1” on the hump but will need text fitting before welding, it’s doable, lokar makes the linkage for 6l80, I’ll be running that 👍
@busaracer590Ай бұрын
Looking good bruh I no its going 2 be clean car red rocket was lit bowtie for life 🏁
@RedRocket64Ай бұрын
@@busaracer590 Thank you!! Always got to have a Chevy 👍
Пікірлер
What year is your engine engine?
@@ericson.c.c.incericson9181 2017
Thank you, man I love your videos great detail
@@ericson.c.c.incericson9181 Thank you! 🤝
Dude I need help with my car
La più bella dopo la eldorado caddy Biarritz!
What welder are you useing
Do u still use pan bar
@@EricSionni-ks7ne no sir.
Getting ready to buy a new welder "feeder" i use to stick weld takes to long and not clean.what welder would you recomend ,? Or what would work good from home depot? Thanks clean work.
Nice WORK HOMIE!!!
Thank you! 🤝
My first car in 1966 from my father. Same color but 4door. Same exact color. It had a 283 cu in engine automatic and had a Rochester 4 barrel. I loved that car. Had to sell went into military in1967. Awesome car brother!
Do you install moonroof? I have 63 looking to 44in installed
this is off topic from the video but what kind of adhesive would you suggest using to put metal wheel chips in my ko caps
@@queenmedusa2554 E600 glue would be the best option, it’s self leveling so make sure the caps are flat, once you adhere the chip to the cap use masking tape so the chip won’t move, let dry for 24 hours, remove masking tape and your set. I’ve owned more knockoffs then I would like to say and I’ve never lost a chip using this method, hope this helps 👍
bet,good looking out,u and your team are outcold with these builds,very inspiring!!!should i scuff the surface of the cap and chip before gluing?and should i do it after the caps are installed or when there off the car,im not sure if smacking 0:10 em with the lead hammer will break the glue loose.
I just ordered one
Dayum that shit is so clean
@@TiK2theToK thank you 🙏
Hi Jonny How is everything after all the crazy weather ????? I Emailed Ken at his work on Monday but have not heard anything from him. Hope everything is OK
All good over here Ed, no significant damage at all, kens job did not have power so he didn’t have to go to work, the whole credence crew is ok, thanks for asking Ed 👍
Very Happy you are all OK. My Wife is on the Weather 24/7 when the weather gets bad. Nice info on the Headlight Buckets 58's were the worst here with the salt in the Winter, the whole top of the fender would rot out and the NYS Inspection required that they check the Headlight Alignment so your lights did not blind someone coming at you.
@@edgrabski1390 I don’t blame her with all the crazy weather going around, 58s did have it way worse 😬
Jesus that’s your dream car? Dood there is nicer sh_t out there in the world you may need to up your status brah
Thanks for your help, I am putting together a 59 Impala was taken apart several owners ago.
You’re welcome, glad the video helped! 👍✔️
Clean ass car bro 💯🙌🏻🔥🇲🇽
@@renealaniz6066 thank you sir ✔️👍
Very nice work! Those emblems look great!😎👍
@@lowridercoloringbook Thank you 😎👍
Those Daytons are clean as hell
How you get them windows so fogged up holmes ?? 😉💯
I have an original paint 59 delivery and it has the slanted headlights! Also if you look at the stock outer door handles they run uphill to the front. Thanks for the great videos.
@@geo611 There you have it! Hopefully more will notice, you’re welcome, thanks for the support 👍🤝
Do you have a part number for this kit
@@williamaguiar14 vintageair.com/1964-chevrolet-impala-with-factory-air-surefit-complete-kit/
On the video you say 7/16 but on the link you say 9/16 and the site doesn’t have 9/16 can you please clarify thanks
7/16-14 cage nut.
She's beautiful except for the wheels
@@charliemclaughlin1042 Thank you👍
Mark VI in cold effect. Djeah.
Faaaaaa , I ain't going to lie am jealous as F 😃👊🏼🍻
On point 👌👌
@@javierflores4605 thank you 👍🤝
He'll yeah brother keep that hustle 💪 Going
😎
Clean asf 🫡
@@gorillakingzinc6206 Appreciate that!! ✔️🤝
BOXSTATECOLORADO. CAME OUT DOPE. LIKE THAT YOU SHOW EVERY THING U DO. YOUR NOT STASH WITH THE NOLLEDGE PEOPLE CAN LEARN. SIK.
@@loniecruz9824 Thank you sir, I’m going to post every bit of this build on here, engine swap, wiring, hydraulics power windows ect. Stay tuned 👍
@@RedRocket64 BOXSTATECOLORADO. YOU SHOWED A LOT WITH RED BUILD. GREAT STUFF.
Nice work sir
Valuable info man. Thank you for sharing! great video!
@@gavendelrio9193 Thank you for the feedback 👍✔️
Bro definitely got him some Hawk Tuey on the road…💯
Oh baby😊
@@arnoldsital3466 😎✔️
Learned a lot from your video 🤗planning to pickup. 1959 Impala, or Bonniville, Electra 225 Vista (4dr. H/T) one of these soon 😳Thanks, SIR 😬
All great choices! You’re welcome 👍🤝✔️
I look forward to your videos your fucking awesome bro Good work
Thank you sir! Plenty more to come 👍
Definitely interested in the fuel injection emblems and flags! I’ve been looking for some!
Coming soon, I’ll make a video when they are ready 👍
@@RedRocket64 how about the paint dividers used to split the two tone on the top of the fins. Those might be worth a remake if you can do it.
@@RedRocket64how much you going to be selling them for.
Need the FI emblems! Sign me up for a pair Palabra For my 59 el Camino lol
Will do brother, I’ll make a video once they are ready ✔️👍
@@RedRocket64I don’t have social media but I do have KZread and eBay if you can link wherever you are selling them in the video when they are ready I would appreciate it! Will be waiting
@@Juliovee123 Sounds Good brother 👍✔️
Awesome work on the fuel injection logos
Thank you!
Nice procedure Now is the time to take care of all those little items that need attention. Are you gonna block this car assembled? Panel to panel? Happy 4th!!
Happy 4th James! The panels are pretty straight, there is only one corner on the bottom passenger door that is killing me, the rest of the door is lined up perfect, I’ve adjusted it as much as I can, not sure how to approach it just yet 😬
Perfection 👌 makes it more valuable to every car owner good 👍 job..Always getting down
Thank you! 😎✔️
Great video bruh awesome 👌🏾 👏🏾 👍🏾 🏁🏁🏁💯💯💯🔥🔥🔥
@@busaracer590 Thank you sir!!
Incredible body work!! Can you make a video on how you use the slap spoon? Thanks brother! You keep us inspired!!👍🏽💪🏽
Thank you! Glad the videos help, yes I’ll make a video soon on the shrink disk and slap spoon 👍
🔥🔥🔥
@@robertyepez2145 👍
Great work. Make some templates if possible on your fender top spears...someone needs it
@@neuyen001 10-4 👍
Firma build homie!
@@michaelmendoza820 Thank you bro 👍
💪🏾💪🏾🔥💯
@@robsoultrain1061 👍🚀
Great series of videos. Especially for first timers with LS/LT swaps. Gets interesting with tunnel hump mods with 6L80 and 64SS with console.....lol.....There is always a way ! Do you have a plan for your shifter linkage?
@@JamesSmith-oe1ot Thanks James, that console can get tricky, you could get away with 1” on the hump but will need text fitting before welding, it’s doable, lokar makes the linkage for 6l80, I’ll be running that 👍
Looking good bruh I no its going 2 be clean car red rocket was lit bowtie for life 🏁
@@busaracer590 Thank you!! Always got to have a Chevy 👍